Cisco Secure Virtual Networks (CSVPN) training

This course has retired? If so, then what course covers training on VPN 3000 concentrators?

There is no review of replacement for 642-511.

http://www.Cisco.com/Web/learning/LE3/le11/learning_retired_certification_exams_list.html

There are other concepts converying certs a broad range of VPN, I suggest to look to track PSAB.

http://www.Cisco.com/Web/learning/LE3/LE2/le37/le54/learning_certification_type_home.html

Also, you can find wider audiences in the certifications and training forums under the discussion of Career Certifications page main netpro, there you can find rich information about your concerns of training certificates.

Rgds

-Jorge

Tags: Cisco Security

Similar Questions

  • What book to review Cisco Secure Virtual Private Networks?

    Hello

    I want to prepare for the Cisco Secure Virtual Private Networks (642-511) exam.

    Can someone tell me what is the book of CiscoPress recommended to pass this test?

    Thank you.

    Hello

    Well, Cisco offers a good game that allow you to a tour of the fast configuration of the VPN 3000 Concentrator, logon to:

    Cisco certifications-> games community-> Cisco Secure volunteer

    Sound of running a tour so that your actions are limited, but this will give you an overview of GUI.

    I hope this will help

  • Cisco Secure ACS vs IAS in Windows

    Hi all

    I need deploy an AAA for the following situations.

    (1) remote access via Cisco VPN Clients.

    (2) AAA for wireless windows PC in remote areas

    (3) AAA for Cisco switches and routers in remote areas

    (4) authentication with a windows domain

    The the Windows IAS would be virtually free that we already have Windows 2003 domain controllers at each remote site. However, Cisco Secure ACS might also be an option. Not all have experience in these two?

    What are the positives\negatives of each? and limits?

    Does anyone have any information on case study etc. in comparing the two?

    Your help is greatly appreciated.

    Kind regards

    Andy

    PS: There is a limitation in Windows 2003 Standard edition, which limits the number of Radius clients to 50. Although we have more than 50 potential clients in society, no site has more than 50 altogether.

    MS IAS allows you to implement the solution using only the RADIUS protocol

    ACS offers the feature to use RADIUS as well as GANYMEDE.

    Looking 4 solutions you want to implement, only 3rd solution will be a little easier with GANYMEDE, but even once it not something you can not implement using RADIUS.

    On the limitation of Radius client, ACS offers a large database that you can use for customers, so limiting to 50 customers. In addition many many features, you'll love to integrate into your network as the NAP/NAC implementation, made it easier.

    So you need to check if you have the budget, you can go to ACS, IAS on the other can work well for all solutions (except limitation of radius client, I m sure that MS can provide a workaround solution).

    the following link can help you with information on sales of ACS:

    http://wwwIn-nmbu.Cisco.com/thevault/files/1027/5/ACS4.1-Sales-guide%20April%204%202007.htm

  • Lack of EAP = PEAP (Protected EAP) in windows xp sp3 trying to create virtual network tomy office.

    I'm trying to create the virtual network in my office and the dropdown under the security of network connections authenticatication tab the list drop-down option to authenticate "= Protected EAP (PEAP) EAP is missing. I need to select this option to connect to my office according to the documentation provided by them.

    I m in a situation where I need to connect and work. Office staff not support this problem because it is my laptop at home.

    If please suggestions for install or upgrade or solutions to this would be greatly appreciated.

    Thanks in advance.

    Regads venzy

    Hate to tell you but PEAP is not supported by nature in windows XP. You must purchase and install a version of 3rd party drivers.

  • API License - Cisco Security Manager

    I would like to know the license API to integrate a solution Algosec Cisco CSM. This license would cost or not?

    Q. what are the features of the API?

    A. based on the API access Cisco Security Manager to share information with other services essential network such as respect and analysis of advanced security systems to streamline their operations, security and compliance. Using a representational state transfer, external firewall compliance systems can directly request access to data from any security device managed by the Cisco Security Manager. Several suppliers of conformity of safety including Tufin Algosec and Skybox, have updated their products to work with the new APIs in the Cisco Security Manager

    http://www.Cisco.com/en/us/prod/collateral/vpndevc/ps5739/ps6498/qa_c67-727089.html

    I'm waiting for return,

    Aldo Melo Lopes

    Yes. The fare is US$ 5,000.

    The product number is 'L-CSMPR-API' (Cisco Security Manager Pro - license for access to the API).

  • Cisco Secure ACS Solution Engine ping

    1. I installed Cisco Secure ACS Solution Engine with V3.3 and I can access via the http port 2002 but I can't it ping from anywhere in the network, but the server can ping every thing, is this normal.

    2. If I can't ping haw I can define the service keeplaive to load balance 2 ACS engine using CSS

    By the way, I forgot that ACS 3.3 device has a CSA integrated. This agent is enabled by default. He explains why you can't ping it.

    For enable/disable it, go to "System Setup Configuration - device. Toggle the checkbox enabled the CSA according to needs.

    http://www.Cisco.com/en/us/partner/products/sw/secursw/ps5338/products_user_guide_chapter09186a008023361d.html#wp859228

    Rgds,

    AK

  • Import batch of the NAS Cisco Secure v2.6?

    Hiya,

    We run Cisco Secure v2.6 & want to add all our routers in as "Network access servers" so that we can authenticate NT accounts.

    The problem we have is not with the configuration but the addition of some 300 routers - quite a long process I'm sure you can imagine!

    Anyway is batch import all of these routers - in a similar way to the users? Tried passing the various parameters in the URL, but this doesn't seem to work (think theres some smart java EFS it or aomething).

    Any suggestions would be received gratefull!

    Paul Woolnough

    [email protected] / * /.

    In addition to capacity CSUtil documented at

    http://www.Cisco.com/univercd/CC/TD/doc/product/access/acs_soft/csacs4nt/csnt24/csnt24ug/apimport.htm

    (CiscoSecure ACS database command line Utility), CSutil can also be used to import the NAS devices. It will import from a text file that lists the NAS so devices that their (local significance only) host name, ip address, key and Protocol.

    This is a sample file represents the syntax/format used for this import:

    ONLINE

    ADD_NAS:Router1:IP:10.31.1.51:key:Cisco:vendor:CISCO_T +.

    ADD_NAS:Router2:IP:10.31.1.52:key:Cisco:vendor:CISCO_R

    Here we see two NAS devices listed - ROUTER1 and ROUTER2, both using the key "Cisco", and the ip addresses are easy enough to identify it. And since ROUTER1 lists the parameter ' CISCO_T + ', it will be imported as using Ganymede +; We see a similar format to the NAS ROUTER2, which will be imported as using RADIUS.

    With the keyword "ONLINE" at the beginning of the file, the NAS devices will be imported while ACS is still running. It is a slow process, but it allows importing unfold without downing the ACS server. If you want to interrupt the services ACS temporarily while you perform this import, you can replace 'OFFLINE' to 'ONLINE '. Importation would complement then much faster.

    So the first task would be to build a text file using the format above, and for our example, we will say this file was named fred.txt. Once this file is created, you will need to copy this file in the following directory:

    C:\Program Files\CiscoSecure ACS v2.6\Utils

    And then at a command prompt, navigate to the same directory and run this command:

    CSUtil-i fred.txt

  • Cisco Security Agent cannot close port 135/tcp on Windows hosts

    Hello

    I met with the problem that Cisco Security Agent cannot close port 135/TCP on PC windows (XP or Win7).

    I configured the network access control module to prevent all client/server connections to port tcp/135 of the rule.

    I checked my police using nmap, so this port (TCP/135) 20 minutes shows as filtered and I see connect event monitor on the CSA MC, over the next 20 minutes he see as open and no newspaper doesn't show. (not exact time, then it maybe 30 minutes or 5, this varies)

    Can someone explain how TCP/135 works and it is possible to close it using the CSA?

    Thanks in advance

    There is another question for the same problem on the forums (see: CSA 6.0.2.145 problem with windows firewall 7). I wrote: -.

    "I advanced and tested in the laboratory with winXP and CSA 602-149 (later). I've defined a rule with DENY tcp/135 and ran the nmap and reports of open (wireshark performances to the syn syn - ack). I changed it to a REFUSAL of PRIORITY and now closed nmap reports (wireshark shows restore the syn). Through the CLI, netstat - a watch the pc listening on tcp/135 & disabling the syn CSA Gets the syn - ack response. For me, this means a few flaws. 1: DENY should block tcp135 syn & 2: CSA does not send reset (it needs to be reset). Is it possible to open a TAC case and put my name (mwinnett) in it, and I'll open a defect. »

    Matthew

  • Install Cisco Security Manager 4.7 on Hyper-V

    Hello

    Our clients want to install Cisco Security Manager on a Machine virtual Windows virtualized with Hyper-V. The only references documentation install the software on a Virtual Machine on Vmware systems.

    Can be installed without problems, and the installation will rely on the TAC if we open a support case?

    Best regards

    David

    While he expected to work (since CSM is essentially an application running on a Windows Server), it is not a system that meets the requirements of the Setup Guide.

    Then... If the TAC has found a problem related to this configuration when you need their help, they would be within their rights to say your installation is unsupported.

  • Cisco Secure ACS 4.2 on VMware ESX 4.0.

    We must move from ESX 3.5 to ESX 4.0 a virtual machine running Cisco Secure ACS for Windows version 4.2.

    This solution is compatible and supported by Cisco?

    Thank you.

    Andrea

    ACS Windows 4.2 is not supported by Cisco, when installed on VMWare ESX 4.0 in accordance with the following documentation:

    http://Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/device/guide/sdt42.html#wp37898

    Only ACS 5.1 is supported on ESX 4.0:

    http://www.Cisco.com/en/us/partner/docs/net_mgmt/cisco_secure_access_control_system/5.1/installation/guide/csacs_vmware.html

  • With Cisco Secure ACS for Windows GANYMEDE +, authentication fails with AD

    I'll put up a Cisco Secure ACS 4.2 server to act as a RADIUS server for switches and routers I use Windows 2003 server for the candidate countries.
    and an Active Directory of Windows 2003 server.  The ad server is very good, it is used for many other things.

    I've implemented ACS as defined nit it installation guide, including all the steps in the "Member Server" section of the installation guide
    When you use AD as an external database (e.g. setting up services to run with a domain administrator account, set up a machine called "CISCO"
    on the field, etc.).

    I've set the unknown user policy to use the database of Windows, if the internal database does not contain the details of the user.

    If I add a user to the internal database, authentication goes through fine, with an entry in the journal "Authentication," spent

    02-24-2010, 05:07:03, authentic failed, eXXXX, Network Administrators (NDG), X.X.X.X, (default), internal error, (get the internal error error message)

    I scoured google etc and just cannot come up with any reason why this should be the case.
    I followed all of the installation to the letter guides.  I need to get this up and running as soon as possible,
    so am eager to know if someone can help me with this one!

    Thanks and greetings

    Sharan

    George,

    Internal error is fairly generic, but a common situation, we see this error is when ACS is installed on a

    64-bit computer.  ACS would not work with the active Manager when it is installed on the 64-bit before machines

    ACS 4.2.1.

    -Jesse

  • IPS Manager Express or Cisco Security Manager?

    Hi all

    We think buy the license for the 5512 IPS - that of above (IPS Manager Express or Cisco Security Manager) is the right tool to read about management purposes? Or I can be selected? If I can choose either, which guy are you advocating?

    See you soon!

    M

    How many systems do you have? If the number is high, the CSM is the way to go. Manage many systems (and keep them in sync with the same political) with IDM and IME is a nightmare. But if it is a single system, the EMI is the right tool for you. It works very well for the follow-up (up to 10 devices) and can also manage them (individually, it is not so easy for more then another system). And it's free.

    --
    Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
    http://www.Kiva.org/invitedBy/karsteni

  • Cisco Secure ACS appliance - impossible to edit... Reason: The host no longer exists.

    Hi team,

    I have 2 camera which I am not able to remove a group of network devices home device.

    When I try to remove the device after error is thrown

    Impossible to edit INMUM-VPE-T1-3rdFloor-3750-S...  Reason: The host no longer exists.

    Running on Version: Cisco Secure ACS4.2.0.124

    One would come in all of these issues. someone knows the solution.

    Concerning

    Vineeth

    Hi Vineeth

    Yes, you can do through GUI.

    The GUI:

    1 ACS gui > network configuration > click on 'Search', then click 'Search' again.

    2. complete list of all network devices. On top, you will see an option "Download".

    Download the complete file.

    Let me know if it helps.

    Thank you

    Nelson Saha

  • NCS and Cisco Security Manager 4.2 servers

    Hi all

    I spec'ing on two new servers; one is for a box of first NCS and other area of Cisco Security Manager 4.2. I have decided to go with the range servers Cisco UCS, but am a little unsure of something on the said recommended in the datasheet for the AC.

    The NCS data sheet

    http://www.Cisco.com/en/us/prod/collateral/wireless/ps5755/ps11682/ps11686/ps11688/data_sheet_c78-650051.PDF

    ... reads as follows:

    ******************************

    If the first Cisco NCS deployment as a virtual appliance on a server provided by the customer, one of the following versions

    VMware ESX or ESXi can be used:

    Version of VMWare ESX or VMWare ESXi 4.1

    ******************************

    This means that the NCS software MUST be be virtualized, or can it be installed and simply turn on something like Windows Server 2008? If Yes, through a serious disk image?

    Secondly,.

    the two servers are running RAID arrays and I was wondering what are your views on the execution of any (OS, Cisco software, records and other data) set on the RAID array, or the OS and Cisco software on a separate boot disk and store data only on the RAID?

    I see no reason why it would not run together on the RAID, but I'm curious to know what you think about it.

    In addition, we are upgrading our WCS courses and I was wondering if some kind of migration is necessary or can we just install fresh NCS on the server and configure it accordingly.

    See you soon,.

    -Dave

    Dave,

    For the first part, the NCS works only as a virtual machine.  You can buy the device hardened to it, but it's still a virtual machine, NCS is presented as a .ova.

    Regarding separate them, with NCS I don't think you'll be able to.

    Steve

  • PIX 515e, multiple VIRTUAL networks on a physical interface to DMZ

    We try to set up multiple VIRTUAL networks on a physical interface to the DMZ on a PIX 515e.

    The goal is to have logical subnets linked to our single, physical interface DMZ.

    Here's what I've tried so far without success:

    The switch

    -created the vlan 30

    -added switchports fa0/1 to 30 of vlan

    -attached host 192.168.100.1 in fa0/1

    -added switchport fa0/24 to the vlan 1 and vlan 30 with multimode

    -interface PIX DMZ connected to fa0/24 switchport

    -attached host to switchport fa0/10 172.16.1.55 (vlan 1)

    PIX:

    Auto interface ethernet2

    logical ethernet2 vlan30 interface

    nameif DMZ security50 ethernet2

    nameif vlan30 dmz2 security50

    address IP DMZ 172.16.1.254 255.255.255.0

    IP address dmz2 192.168.100.254 255.255.255.0

    Results:

    -172.16.1.55 has full connectivity to the PIX and beyond.

    -192.168.100.1 cannot ping the PIX to the 192.168.100.254 or anything else besides.

    Any help would be greatly appreciated. Also, I realize that I could buy a four port NIC and use the physical interfaces, but I can't get the approved purchase.

    Thank you

    Creation of VLANS on Ethernet1

    We want to create a new interface VLAN - VLAN30 and name DMZ2. Also affect the security level 50 in it.

    Step 1: Create a physical Interface:

    PIX (config) # interface ethernet1 vlan2 physical

    Step 2: Name the Interface and set the security level:

    PIX (config) # nameif ethernet1 inside the security100

    Step 3: Assign the IP address of the interface:

    PIX (config) # ip inside 192.168.1.1 address 255.255.255.0

    Step 4: Create the logical Interface:

    PIX (config) # interface ethernet1 vlan30 logical

    Step 5: Name of the Interface and set the security level:

    PIX (config) # nameif vlan30 DMZ2 security50

    Step 6: Assign IP address to the interface:

    IP pix (config) # DMZ2 192.168.100.254 255.255.255.0

    Step 7. Switch, set the port where from the inside, to the Isls or dot1q physical interface. Place the sheath in the native vlan2 as in step 1.

Maybe you are looking for

  • I don't know why YouTube videos then twinkle my extensions are enabled

    YouTube videos won 't play correctly. I tried everything I know. I run mozilla Add-ons disabled works fine, everything is ok. When mozzila works with ad - ons active and I turn them off in the screen announces the videos are bad.

  • Get 80070673 and 80070663 error codes

    I have Windows Vista Home Premium and have tried to install Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update (KB951847) x 86 and update for .NET Framework 3.5 Service Pack 1 for .NET Framework Assistant 1.0 x 86 (K

  • The upgrade of stock of power supply and GPU [A6325.UK HP Desktop]

    Hi all I'm looking to upgrade an aging ( a6325.uk) HP desktop to make it more efficient with the task of casual games. Games that will run on the machine are not too intensive (half-life 2, World of Warcraft, Diablo 3) still could benefit from a more

  • Conection problem

    I have a computer dell laptop with vista for 2 years. I can't connect to my old HP Officejet v 40.Help... Rilesreilly

  • OfficeJet Pro 8620: Printing an envelope

    Each time... No, I'll just on an envelope, I get an error message saying that the envelope located in the drawer is not the size specified in the print options. Is there a way I can download the software or anything to get the printer recognize and a