Cisco SLM224G VLAN Trunk Help! -> Problem solved!

Hi, I have a few difficulties of implementation of the switch, I can't understand how to configure the network for VLANs created port. I have configured under management of VLANS, VLAN 10 and 20, I asigned ports e1, e2, e3, e4, e5, e6 with 10 PVID and e7, e8, e9, e10, e11, e12 with 20 PVID and the rest to defaul 1 PVID, frame SD = All + infiltration on filtering. Under port to VLAN-> VLAN10-> ports e1, e2, e3, e4, e5, e6 Tagged + e24 tag (I want this to be the trunk) and the tag VLAN20-> e7, e8, e9, e10, e11, e12 Tagged + e24. Theats all that I set up according to the SLM_Admin_Guide.pdf and I have connected the e24 (trunk port) to a Pf meaning Server (the server is configured with the same VLAN ID as on the switch), please someone tell me how to set up the trunk? I know that there is no option in the Port settings to define 'Access' or 'Trunk'... until this means? that the SLM224G does not support the VLAN Trunk? I saw some screenshots with the Linksys SLM224G and he had 'Access' or 'Trunk' setting... and Cisco does NOT work.  Help!

Hello

Interesting, I see two different GUIs in your screen capture, it looks like two different computers. :-)

But the big brother of the SLM, the series SRW and I am about what follows to the SRW series, because I do not have a SLM in front of me, I had put;

Step 1. the port settings interface return, leaving the PVID to 1 then do scroll down and save the option.

Step 2.  On this "ports setting photo GUI, you have, I would put the switch ports to shared resources in mode Trunk. If the port must not be tagged in the VLAN 1 only, then I leave the setting the port mode 'access '.

(Access mode allows a port belong only to one VLAN no marked only).

(shared mode allows the switch port belong to several VLANs marked, but still unmarked in one vlan only usually the vlan by default)

Step 3.  So I goto the "Vlan to the port' tab, Tagged for ports beloning to vlan 10 then do scroll down and save the option."

step 4   So I goto the "Vlan to the port' tab, Tagged for ports beloning to vlan 20 then do scroll down and save the option."

By default vlan1 in most SRW series brother would then be not identified on all ports and vlan10 and vlan 20 could be labelled on the appropriate ports.

Tags: Cisco Support

Similar Questions

Maybe you are looking for

  • How to spend my credit

    Hello I want to change my country of apple ID. But in my account I just $ 0.16 and I do not know how to spend it. Please help me!

  • What model of laptop is SA50-532

    My Satellite has the label SA50-532 and the model # PSA50E! To download a sound driver, I need to identify the model but can not find a proper selection. Who can help?Thanks Gonzo

  • HP 15 r203tx: regarding the drivers for PCI Simple Communication controller

    I bought HP r203xt laptop. I installed win7 ultimate 64-bit. I need driver for simple PCI communications controller. I find the Web site but impossible to get.

  • Disable the single column of Table

    Hi all It's perhaps something very stupid to ask. Would have a Table control in which two first column will not be editable by the user and remaining user. How can I go about disabling the two columns of the table control? Thanks in advance.

  • Slow reaction to hard drive or memory

    I see in my journal from the mistakes of this message.  My computer keeps "freezing". The device, \Device\Harddisk0\D, has a bad block