Cisco UCS C220 M3 SFF and R2 Datacenter Windows Server 2012

Similar Questions

• T61 - Datacenter Windows Server 2012

  Hi all

  I need to install Windows Server 2012 Datacenter with Hyper-v installed on a Thinkpad laptop, because it is more durable compared to others, and I am planning buy Lenovo ThinkPad T61 with following specifications:

  Hello

  Looking system requirements here on the website of Microsoft, it seems that the T61 meets the system requirements to run Windows Server 2012, but it's largely because Microsoft does not seem to differentiate between the requirements for the Foundation, Essentials, Standard, and Datacenter editions.

  Personally, I would suggest to go with the bigger, more quick 2012-vintage (or most recent) laptop that I could find, for example a W520 or the W530.

  Kind regards

  Aryeh Goretsky

• Internet Explore 11 and Flash on Windows Server 2012 R2

  I used Windows Server 2012 R2, which built it contains Internet Explorer version 11.  During the loading of a web site that has content Flash he invites me to install Flash, but when I navigate to the Flash Download site it says that I must allow it because it is already installed.

  After reviewing the instructions for how to turn on the Flash, directions and not void because they do not match the screen I see.

  QUESTIONS RELATING TO THE:

  1. IE Version 11 has Flash built in or not?
  2. If If does, how can I turn on the Flash?
  3. If not, how to install Flash?

  Please don't tell me to load a multimedia web site and click on 'Manage Add-ons' and activate Flash because Flash enable command does not appear.

  Do you have to intall it? If this is not the case, go to Server Manager-> manage-> add roles and features-> Select here the server you want to install the feature on and under the User Interfaces and Infrastructure select Desktop experience. After installing restart your server functionality. After that, you should be able to view the flash in the browser.

  HTH

  Gavin...

• ACS and WIndows Server 2012

  Hi all, anyone know if there is a Remote Agent who will install and run the Windows Server 2012? I know that we are far behind the code releases, we run 4.2.0 ACS. We waited for ISE to incorporate GANYMEDE +, because it's the only thing that we still use ACS for in our environment. Our server team is eager to improve our DCs to server 2012, and I'm not sure that there is a remote agent that we would always tie back our ACS accounts to domian credentials. Please notify.

  If we improve ACS 5.X am I right to think that, like ISE, there is no need to load a remote agent on the DC?

  Remote agent does not support windows 2012. Only 5.4 ACS task soustenans 2 glass 2012 and who does not need remote agent because it uses inbuild Adagent talk to active directory.

  5.4 ACS patch 2 supports Windows 2012 AD.

  http://www.Cisco.com/c/en/us/TD/docs/net_mgmt/cisco_secure_access_contro...

  Kind regards

  Jatin kone

  * Make the rate of useful messages *.

• How can Cisco ucs c220 m4 I start with 12g cisco sas controller? 2012 UEFI Server installation issues

  first time with cisco ucs c220 m4, check my photos

  You have a VD 11TB.

  Only way to start on this is by using UEFI.

  You need to activate UEFI in the boot order.

  Anything over 2 TB and more 4 K sector size readers require the UEFI boot option.

  BIOS will not process the VDs when manages UEFI.

  Kirk...

  Summary for those who seek a similar question:

  • Client a large VD created, 11TB
  • 2 TB and more, 4K sector drives, require boot UEFI + GPT, cannot use the legacy/MBR
  • To set startup to local HD option, that referenced the PCI-E Slot, the raid controller was in (HBA slot in this case)
  • UEFI mode, can't score a VD as "bootable disk / startup.
  • You will see not the VD/raid controller appear in the 'real' boot order during the OS install.
  • Once the installation of the OS compatible UEFI is made, it will create a UEFI boot to the operating system "Windows Boot Manager" entry in our case.
  • After the next reboot, if you check your boot order, you should see this UEFI OS boot manager entry.

• Windows Server 2012 R2 Datacenter - "we couldn't complete updates of changes to undo; do not turn off your computer.

  There are approximately 247 updated to do with this Windows Server & as before in the past w / various different OS that I discovered that these must be mounted separately & batch too for these works correctly!

  There must be - a kind of server 2012/r2 cumulative hotfix / service pack that will sort most of these problems of updates w / a download link for getting these!

  But how & in which updates of the batch/grna they do have to do to finish correctly without these issues and so on!

  example"separate updates like this should be done in separate lots and so on!

  (a) Internet Explorer updates

  (b) .NET Framework 4.6

  (c) KB * item updates made in various lots of diferent etc.

  Thanks a lot for your help as it is very much appreciated! A little more the last hours of your answer I had actually beta tested who follows & found that if you keep w / the following it works actually & w/out any error!

  ***************************************

  Windows Server 2012 R2 Datacenter - updates!
  Manually set the updates of Windows Server R2 Datacenter 2012 as follows"
  ' Check for updates but let me choose whether to downloadand install them.
  ***************************************
  (c) Finally,... There are several optional updates to do that must also be separated for installs them!

  1 Microsoft Silverlight (KB3182373)

  6 update to Windows Server 2012 R2

  "(b) s @ less (233) KB * important updates that should be made in separate batches of selected manually - from a @ bottom & goes to the high c as follows.

  119 for Windows Server R2 2012
  98 security Update for Windows Server R2 2012
  1 acumulative Security Update for Internet Explore 11
  1 cumulative reliability for Microsoft .net 4.6
  1 security Update for Microsoft ASP.NET
  13 4.6 .net Framework

  (a) there were several original KB * updates manually, I downloaded & installed directly from the "Microsoft Download Center" w / some which are detailed below.

  1 Windows Server 2012 R2 Update (KB2919355)
  1 update to Windows Server 2012 R2 (KB2883200)

• WAAS for RADIUS and Windows Server 2012 NPS server configuration

  I have trouble getting our WAAS to authenticate devices and connection via RADIUS.  Running NPS on Windows Server 2012.  Confirmed that my device WAAS can ping the IP address of the RADIUS server.  Using the attribute Type of administrative service under network policies.  Look in the event viewer, I get an error with event ID 15, "a malformed RADIUS message has been received of the xxxx-WAAS-01 customer. The data is the RADIUS message. »

  Right now, I can connect with only the local default user and password name.  Here are a few config for WAAS, running version 6.2.1:

  RADIUS server key *.
  Server RADIUS auth-host 10.194.10.13 port 1645
  !
  connection of local authentication enable secondary
  enable login authentication RADIUS primary
  local authentication configuration enable secondary
  Service radius Authentication configuration Select primary
  failover of authentication server unavailable

  I confirmed that my shared key is entered correctly on the WAAS and the NPS.  I have the switches/routers Cisco works well on the same RADIUS server.

  Someone had a bit of luck plug their WAAS to RADIUS devices using Windows Server 2012 and NPS?  If so, please share additional measures you have taken to get things to work.

  Hi Paul,.

  Based on the RADIUS error you probably experience failure CSCva14731. This was discovered with Cisco ACS, but can affect other RADIUS servers.

  To confirm, you can check the corresponding error in syslog WAAS:

  authenticate: % WAAS-UNKNOWN-3-899999: pam_radius_auth: talk_radius: RADIUS server did not respond (timeout 5 (sec))

  Also, this defect would not affect peripheral on software 5.x WAAS.

  The problem will be solved in 6.2.3 to come free.

• DPM 2007 and windows server 2012

  32 bit System Center dataprotection manager 2007 can use windows server 2012?

  I installed the recommended updates - file DataProtectionManager2007-KB959605 and x86_DataProtectionManager2007-KB970868, but I can't install dpm on windows server agent 2012

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  Or here at TechNet Data Protection Manager - File Protection:

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=dpmfilebackup

  TechNet forums of Data Protection Manager.

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=dataprotectionmanager

  See you soon.

• Windows Server 2012 Foundation and SMB problems with older equipment

  Hello

  My problem would be resolved if I had Windows Server R2 2012 but I have Windows Server 2012 Foundation.

  This article describes the problem exactly: https://support.microsoft.com/en-us/kb/2896636

  But of course, the solution does work with my version of the server.

  Does anyone know if there is a similar fix available?  I got my hunting.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Windows Server 2012 R2 Datacenter: Activate the virtual machines on a host KVM

  Hello

  I bought four licenses for sale at retail of Windows Server 2012 R2 Datacenter. With the license of data center, I have the right to install a number of Windows Server R2 instances unmlimited 2012 on the physical machine with the associated license.

  The question now is: How can I activate Windows in virtual machines?

  As virtualization host, I use KVM, AVMA is not possible. I need a KMS host key to set up a KMS host. I tried to use my product key for the retail license but the VMAT does not accept the key, because it's a KMS - no key. Where should I paste my product key for the KMS host key?

  Kind regards

  Thomas

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• We license from microsoft windows server 2012 and I want to install Windows server 2008. Is this possible?

  Hello

  If we have the license microsoft windows server 2012 and I want to install Windows server 2008.

  Is this possible?

  Thank you

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Thumbnail option does not work in Terminal Server in Windows Server 2012 and server session

  This might be a stupid question.

  We have two Windows server 2012 R2 - TS and DC. The clients are connecting to TS and access the shared network drives present in DC. I always unchecked 'show icons, never thumbnails' and 'Show thumbnails in System Properties' enabled on DC and the two TS.

  No always thumbnail option.

  You will need to click on each image. Users have many files containing multiple images. It's annoying to click and view each image.

  Note: NO GPO is configured to block it. Checked.

  I can't find any object GPO to allow this option to be :)

  More info. For customers, anywhere, whether network shares or all folders in TS session. It does not work. Also tried painting and Windows Photo Viewer.

  Here, any help will be very appreciated!

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows Server 2012 reboot w/dump (Standard Edition 64-bit (English)): w / a) CA ARCserve Backup version 16.5 b) JAVA JDK 1.7.80 c) Tomcat 7.0.59; Unexpect error and restart w/dump?

  Windows Server 2012: unexpected system error and restart w/dump?

  With the software running:

  (a) CA ARCserve Backup version 16.5

  (b) JAVA JDK 1.7.80

  (c) tomcat 7.0.59;

  (d) Symantec Endpoint Protection Version 12.1

  (e) PowerChute Network Shutdown 3. 1.0

  Should I plan to restart (I can only remote access) server for every 2 months?

  Running (without rebooting) non-stop over 6 months ago.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Error installing 32 bit application in Windows Server 2012 R2 Datacenter edition

  Hi all

  I have a software that worked very well in a 32-bit of Windows Server 2008, I installed the same software in a 64-bit Windows server 2012 R2.

  I get an "error 48 error loading the dll" error when I run.

  I tried to register the dll through command regsvr32. I get an error "dll was loaded, but the DllRegisterServer entry point was not found."

  I checked the dependence of the dll with other files you use Depends.exe

  I tried to copy the dll in the other place, but none of them worked.

  I still get the same error when I run the application.

  Please help us with this if you know the solution.

  Forgive me if this isn't the correct phase and guide me to the correct page.

  Thanks in advance.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• How to restore the network icons and properties on Windows server 2008

  Original title: network properties

  What is the best way to restore the network icons and properties on Windows server 2008.  The properties of network share folder is empty and the internet icon is missing as well.

  Hi Mitch,

  I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  Please do not hesitate to contact us if you have other questions related to Windows.