Cisco Unity Connection (CUC) - import LDAP user based on the security group and then assign a model

Need to CUC automatically import users and assign a certain user or role model if they are added to a specific security group. (These are the help desk users).  Username admin accounts they will use to sign in CUC differs from that there windows account that is linked to their profile of voicemail.

Current - now we must import new recruits and assign the correct model

Want - when a user is added to a security group in AD, so when CUC doing his nightly sync, it automatically import user and assign a preconfigured for the account and all user model is automatic and I have never import it back these users.

At the present time the course help desk users are already imported via LDAP and have the role that was.

Suggestions?

Not something that the UCA can do out of the box.

The UCC does not offer, is to do the LDAP synchronization and once they are in CUC, to import, choose the model.

Tags: Cisco Support

Similar Questions

  • Every time I connect to my windows user takes awhile so it starts and then hangs / freezes

    My laptop does not load. It starts normal and when I connect it takes 3 min just to show the wallpaper and just when everything seems to freeze. I get messages like "0xc0000006 failed, something igftray blah blah blah." There is also another for itunes/quicktime "(cela n'arrive parfois, selon si j'ai même arriver à obtenir pour le papier peint. Parfois il se fige/accidents avant) I can boot into safe mode [I am currently in safe mode] also, I tried to go into Device Manager and there is a warning sign next to ISATAP map." Looked this up and stays, it can be ignored. I tried to restore to a previous point, but for some strange reason, it does not show me when I go back. As soon as I click 'Restore' the computer starts and that I need to log in to the screen. \
    Things I've done recently to the laptop: I tried to put in a new stick of RAM, but the computer won't start so I took and how it was left. This may be the problem.
    The computer does not beep or anything. It is not just to load windows. The furtherest I got me I open Google Chrome but then it froze and the screen has decided to go black. Not empty, the screen was always on but he showed all black. Showed no mouse or whatever it is.
    Please help me because I have to take the plane in less than 8 hours and I NEED to take this laptop with me
    It's a Toshiba Satellite a205-s5880, Vista, 2 GB of RAM atm. Aries is for this type of computer I brought it critical judgment.
    * Whenever the laptop freezes / crashes, the sound of the RAM or what call makes a model/beat.
    I know this sounds childish but I have no idea on how to fix computers, so I gave it my best shot to explain what the problem is.
    IF I PUT THIS IN THE WRONG SECTION PLEASE MOVE IT TO THE RIGHT ONE *.
    Thank you very much.

    Hello

    After checking the above and according to the needs:

    Use the startup clean and other methods to try to determine the cause of and eliminate problems.

    ---------------------------------------------------------------

    References to Vista also apply to Windows 7.

    What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
    on this machine, including those you have uninstalled (they leave leftovers behind which can cause
    strange problems).

    ----------------------------------------------------

    Follow these steps:

    Try these to erase corruption and missing/damaged file system repair or replacement.

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    ==========================================

    After the foregoing:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or
    Windows 7

    http://support.Microsoft.com/kb/929135

    Use advanced tools to solve performance problems in Windows 7
    http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

    Problems with the overall speed of the system and performance
    http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

    How to troubleshoot performance issues in Windows Vista
    http://support.Microsoft.com/kb/950685

    Optimize the performance of Microsoft Windows Vista
    http://support.Microsoft.com/kb/959062
    To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
    Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
    reference (if you have a small box at the bottom left - show for all users, then check that).

    How to change, add or remove startup programs in Windows 7
    http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

    A quick check to see that load method 2 is - using MSCONFIG then put a list of
    those here.
    --------------------------------------------------------------------

    Tools that should help you:

    Process Explorer - free - find out which files, key of registry and other objects processes have opened.
    What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
    each process.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

    Autoruns - free - see what programs are configured to start automatically when you start your system
    and you log in. Autoruns also shows you the full list of registry and file locations where applications can
    Configure auto-start settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
    Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

    There are many excellent free tools from Sysinternals
    http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

    -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
    When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
    Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
    a program that runs in your Windows startup.
    http://www.NirSoft.NET/utils/what_run_in_startup.html

    There are many excellent free tools to NirSoft
    http://www.NirSoft.NET/utils/index.html

    Window Watcher - free - do you know what is running on your computer? Maybe not. The window
    Watcher says it all, reporting of any window created by running programs, if the window
    is visible or not.
    http://www.KarenWare.com/PowerTools/ptwinwatch.asp

    Many excellent free tools and an excellent newsletter at Karenware
    http://www.KarenWare.com/

    ===========================================

    Think about it an absolute must - manually update your drivers.

    Vista and Windows 7 updated drivers love then here's how update the most important.

    This is my generic how updates of appropriate driver:

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
    For each driver in the list, additional useful information is displayed: load address of the driver,
    Description, version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - device - Graphics Manager - note the brand and complete model
    your video card - double - tab of the driver - write version information. Now, click on update
    Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
    Uninstall - REBOOT it will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
    with their own software and drivers and all other main drivers that you have.

    Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
    Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
    BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
    each installation.

    Always check in the Device Manager - drivers tab to be sure the version you actually install
    presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
    in particular that) so to install a driver - reboot - check that it is installed and repeat as
    necessary.

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
    manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers under Windows 7 (updated drivers manually using the methods
    above is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
    found)
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
    Updates, that leaves about Windows updates but it will not install the drivers that will be generally
    older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
    get new manually if you wish.

    Stop Windows 7 to automatically install device drivers
    http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

    How to disable automatic driver Installation in Windows 7 / Vista
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

    Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
    Ultimate and Enterprise)
    http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

    ===========================================

    Refer to these discussions because many more excellent advice however don't forget to check your antivirus
    programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
    first.

    Problems with the overall speed of the system and performance
    http://support.Microsoft.com/GP/slow_windows_performance/en-us

    Performance and Maintenance Tips
    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

    Explorer Windows stopped working
    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Altered in Cisco Unity Connection and cancelled permits NTP server

    I use Cisco Unity Connection 8.6.1 and cancelled my Inbox licenses.  A few days ago I noticed that the timestamp of the voicemails was different from what said our CUCM so immediately, I assume that the NTP servers were different.  I was correct and made the change on our server CUC.  I came back to add another user, a few days later and was motivated that I didn't have enough licenses.  After researching on it after the fact, it seems that this happened because the value of NTP server is one of the values that cannot change with the current license, and I'm in a State of the trial for 30 days (24 days left now).  Now my problem is that I don't remember what would replace this NTP server.  How can I fix this problem?

    Hi William,.

    I guess the connection of the unit is installed on the virtual machine and therefore license MAC is here

    You can get the rehost license by launching the mail to [email protected] / * /

    regds,

    aamns

  • Cisco ASA 5510 - restrictions of VPN (AnyConnect) based on the AD user or IP address

    Hello

    I want to test how to restrict access user on an ASA 5510 AnyConnect. In politics, I can define what networks will go through the VPN tunnel and which not (split tunneling). The ASA has a LDAP connection and only AD users with a special security group can connect over AnyConnect.
    On the other hand I would like to restrict access for special users within a VPN policy.

    So my question:
    What are your recommendations to implement this szenario?

    My two ideas would be:
    1. the access rules based on the user of the AD.
    2. special reserve IP addresses in the pool of addresses AnyConnect for some users, so I can limit access to the normal firewall rules base based on the source IP address.

    What are your recommendations and is it possible to realize my ideas (and how)?

    Thanks in advance

    Best regards

    Hello

    I will suggest that you configure a second ad group in the server and another group strategy in the ASA, you can configure certain access on each group policy "the installer of the filters, assign different split political tunnel, different ACL' and in the ad server, you can assign users for example to the AD Group A and AD Group B based on the access you want to give them now , you must configure LDAP mapping to assign the user specific group policy that you want based on the AD group that they belong.

    You can follow this documentation that will help you configure the LDAP Mapping:

    http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...

    Best regards, please rate.

  • Speech and cisco Unity Connection connect

    Hi all, I've read that speech Connect is available for Cisco Unity Connection Version 7.1.3 and later versions. I installed CUC7.1.3 and CUCM 7.1.3 and I would like to configure this feature.

    If someone have this plase share tips or a document.

    Thank you very much

    David

    Speech Connect is actually integrated in the application of the CUC.  There really isn't any special rig or something like you would have with speech Connect for the unit. When you choose ' enable voice ' Manager directory or AA and you search by name, which is essentially the engine speech connect to work. "  If the user has a registered name, you will hear him play.  If this isn't the case, YOUSSOUF (AutoAttendant activated by speech) will deliver the names for you.

    Hailey

  • Difference between Csico and Cisco Unity Connection unit

    What are the main differences between Cisco Unity and Cisco Unity Connection (version 7)

    as: 1. in Cisco Unity servers are active - failover Mode and about unity, the servers are in active-active mode

    2 Cisco Unity, knows about unity and unified messaging, integrated messaging

    What is the major difference between Unified Messaging and integrated messaging?

    Please provide some points of difference between the two...

    This may well be true today, but the gap could soon close... otherwise disappear.  Cisco is currently in EFT (field-tested at the beginning) or testing "beta" for the connection of the Unit 8.5 (1), which aims to add features of Unified Messaging Unit connection using WebDav for Exchange 2003 and Exchange Web Services (EWS) for Exchange 2007/2010.  Just a nugget to think when you consider the timing of your client to install and what platform would be best suited to most environments.  Take a look at this blog for more information/thoughts:

    http://www.netcraftsmen.NET/resources/blogs/unity-connection-with-Unified-Messaging-where-will-unity-fit-in.html?blogger=David+Hailey

    Hailey

    Please note the useful messages!

  • Cisco Unity Connection deployment

    IM deploy CISCO 1.X for one site unit connection. The partition & call search are created on 4.1 CM. Both phones are added to this partition on the call manager for a local test (telephone2 telephone1 - to-).

    On Voice Profile fighter pilot number is 2010 and the DN of departure for the voice port is 3000. I have configured the phone 1 extension (2015) and telephone 2 (2011) on the Cisco Unity connection.

    when im 2010 (pilot number) im getting the busy tone or the phones calling each other it keep humming without leaving numbering MWI

    You can feed me for cisco unity connecton single site deployment.

    Kind regards

    What are the numbers that you actually assigned to the ports of voicemail? Have you created a list of hunting that indicates the number of driver? Go to the port of voicemail list and try to call one of the ports directly? Unity connection answers?

  • My only intention is to create a model/site based URM where we can provide functionality to scan for users. We want a distributed feature where users can scan the images remotely and commit to the WCC:Records / URM. Is it possible to be thr

    My only intention is to create a model/site based URM where we can provide functionality to scan for users. We want a distributed feature where users can scan the images remotely and commit to the WCC:Records / URM.

    Is it possible to be done through Oracle distributed Document capture (ODDC) and if it is possible how to connect ODDC with the client browser. Please suggest

    Ok. So, the answer is certainly: Yes, it is possible.

    The part of analysis, this is exactly what ODDC is good for. Unless you have the license already, however, you may have to go with the product to Capture Oracle WebCenter (large companies), which provides the necessary also.

    Regarding the validation and storage, ODDC/ODC/WebCenter Capture can commit images scanned at several depots, including University Complutense of MADRID (URM can be considered a Complutense University of MADRID with a specific purpose / several modules or components under voltage and configured). So, technically, he has no problem.

    When I have little doubt, however, is the meaning of the scenario - declaring an item as a record is an important event in the life cycle of the document - a record is often (or always) cannot be changed to ensure the integrity and non-repudiation of information. In this perspective, a direct validation of a recording of a scanning system (where errors such as bad scans, lack of pages, etc can be expected, particularly if the scanning is performed by the end user in a distributed fashion - so, not very experienced) seems a little dangerous.

  • ACS 5.2 assign VLAN based on the ad group

    I am trying to configure ACS 5.2 to assign the VLAN to a dynamic user based on the group to which the user belongs. I went to:

    Users and identity stores-> external identity-> Active Directory-> tab directory stores groups

    and selected the name of the pub group. If I understand correctly, I should now see this group by virtue:

    Elements of strategy-> authorization and permissions->-> authorization profiles for access to the network-> common tasks-> VLAN ID/name

    However, it is not. Am I missing something?

    N °

    ' VLAN id/name "is, in the name clearly States, a vlan id or name. Not a "group name".

    You don't assign it a group name in the vlan.

    The name of the group must go to the condition 'if' in your authorization profile. If "usergroup AD = x" and then assign this vlan.

    Then the id/name vlan's you type manually what vlan refers to the users AD Group.

    If you create too many rules because you have a lot of ad groups, you can do is create an AD AD attribute to store the number of vlan name and ACS will simply return that.

    Nicolas

  • I have a project in iMovie HD6 and want export to Final Cut Pro.  I see that it is not possible from the previous questions, but is it possible that I could maybe create a dvd of the iMovie project and then who import in Final Cut?

    I have a project in iMovie HD6 and want export to Final Cut Pro.  I see that it is not possible from the previous questions, but is it possible that I could maybe create a dvd of the iMovie project and then who import in Final Cut?  I just want to make a new trailer for the project.

    What you suggest is possible but it takes software and third-party quality loss.

    Instead, export a QuickTIme movie. If you have a choice of codecs, choose Apple Intermediate Codec. You can save it where you want it-maybe in the movies.

    Then import the movie into FCP as a clip.

    Good luck.

    Russ

  • Impossible to install the bluetooth driver in XP Mode, error "this software cannot be installed remotely. Please connect to the local computer, and then try again.

    I have win 7 pro as my OS, whenever I try to install the bluetooth driver in xp mode, I get an error message saying "this software cannot be installed remotely. Please connect to the local computer, and then try again.

    Check this box:

    http://support.Microsoft.com/kb/2438651/en-us

  • How to create the home group and how to connect two computers that are running windows 7. and also Remote Desktop connection!

    Someone help me how to create the home group and how to connect two computers that are running windows 7. and also Remote Desktop connection!
    step by step information!

    Hello

    I suggest you to refer to the links and check if it helps:

    Create a homegroup

    http://Windows.Microsoft.com/en-us/Windows7/create-a-HomeGroup

    Join a homegroup

    http://Windows.Microsoft.com/en-us/Windows7/join-a-HomeGroup

    Setting up a network home

    http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

    Remote Desktop connection

    http://Windows.Microsoft.com/en-us/Windows7/products/features/Remote-Desktop-connection

    What types of connections remote desktop should I allow?

    http://Windows.Microsoft.com/en-us/Windows7/what-types-of-Remote-Desktop-connections-should-I-allow

    Remote Desktop connection: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows7/Remote-Desktop-connection-frequently-asked-questions

    Let us know if it helps.

  • Is it possible to hide a conditional function in responsibility. Say it together a small number of users, I need the function display and for some users, it must be hidden.

    Is it possible to hide a conditional function in responsibility. Say it together a small number of users, I need the function display and for some users, it must be hidden.

    Hello

    The normal thing to do is to create a similar additional responsibility and using Exclusions to 'hide' the features you want.

    Then assign it to restricted users.

    Kind regards

    Bashar

  • When I try to use the updated creative cloud up the file runs and then informs me that "Please connect to the internet, and then try again." But I'm obviously connected.

    When I try to use the updated creative cloud up the file runs and then informs me that "Please connect to the internet, and then try again." But I'm obviously connected.

    PlsConnect.JPG

    Hi Colin,

    Please try to reinstall the creative cloud after disabling antivirus and firewall.

    Reference: error download or update Adobe Creative Cloud applications

    Concerning

    Megha Rawat

  • A report that will show how a user has used the secure area?

    Hello everyone.

    I need to view a generated in the report on the activities of the Member section to securezone.

    The ideas are greatly appreciated.

    I've tried selecting the protected area (in the areas of Secure), click on action -> View Secure area usage report

    But it just displays: no data available for the period selected. no matter how to set the filter of time.

    Best regards

    Jones

    It seems that it is a duplicate to your message in this thread: is there a report that will show you how a user has used the secure area? . I will follow on this issue on the same thread.

Maybe you are looking for

  • can not activate ipad 2 after update March 2016

    downloaded the iOS 9.3 update. Update completed, connected to the network, then charges during a certain time but says impossible to activate iPad due to a network problem. tried unplugging the device from my iCloud account still does not. tried rebo

  • Replacement of the power supply

    My son-in-law told me that I need to replace my power supply for my HP Pavilion p6110f, it should be 250 or 300 watts and 80 + Bronze rating.   I run Windows Vista if that matters.  Someone please just give me a suggestion for the right product?  Can

  • 10 Windows will overwrite my files on Windows 7 Ultimate?

    Hi all, I just wanted to ask: when I update to Windows Pro 10 it erase and format my HARD drive while I lose all my music/games/docs and things? Or it will transfer all my data in this new OS? Thank you Carl

  • -What this means: DSD_3092 does not?

    -What this means: DSD_3092 does not?

  • Problem VPN site to Site with overlapping networks

    We currently have a PIX 515E firewall as a headboard with many tunnels of site-to-site configured for her with the enpoints of PIX 506. Our internal LAN addressing scheme is 172.18.0.0 255.255.0.0. Addresses of local network in two of the remote netw