Cisco VPN client 3.5.1 and Cisco ASA 5.2 (2)
Hello
I have a strange problem about Cisco VPN client (IPSec) with Cisco ASA. The Cisco ASA runs software version 5.2 (2). The Cisco VPN client version is 3.5.1.
The problem is the customer able Cisco VPN to authenticate successfully with Cisco ASA, but could not PING to any LAN behind the Cisco ASA. In any case, the problem disappeared when we used the Cisco VPN version 4.6 or 4.8 of the customer. All parameters are exactly the same. What has happened? What is the cause of this problem? How can I solve this problem?
Please advice.
Thank you
Nitass
I understand your problem, I never used 3.5.1 so I thought that maybe nat - t is not enabled by default as 4.x.
Tags: Cisco Security
Similar Questions
-
Cisco VPN Client for Windows 7 and WWAN devices
Hello
Does anyone know when Cisco will release a VPN Client for Windows 7 update that supports devices WWAN using NDIS 6.2?
Thank you
Dave,
End of the client VPN of life was announced. In my view, it is safe to say that no new features will be introduced.
AnyConnect is the way to go (Alternatively Windows 7's native IKEv2 connection works in IOS).
Marcin
-
VPN client 3-party which connects to ASA
Hi all
There are some users allowed to connect via VPN using the Cisco VPN client.
We have seen some users who connect with different clients e.g.: http://www.shrew.net/download/vpn
I just tried it myself.
Simply download the client, Import FCP, and connect to the ASA.
The question is...
The only way to prevent VPN users to connect with any client besides the Cisco VPN client is by defining the type of customer authorized to VPN on the SAA?
The fact that anyone with a VPN profile can use another client to connect does not any security risks?
Federico.
Should not be a problem because it uses the same protocols IPSEC to encrypt/decrypt packets. A possibility is that if she is not comply 100% with the standard, it can could potentially cause unwanted behavior on the SAA.
-
IP address of the VPN client must demonstrate external IP of ASA 5505
Hi guys,.
We have a small project with the Government which has some difficult requiment with security.
Current situation;
1 site the Government has allowed a public IP address of our company to access their server in-house.
2. in our office, staff can connect to their server using RDP by Cisco ASA 5505 I configured with two or three clicks.
3. this ASA was outside (public) Government of authorized IP address.
Request amended;
1. given the increase in the tasks, our staff must have access to the Government of the home server.
2. Government will not grant vpn access to them directly.
3. they ask us to provide our staff VPN then RDP access to the Government site.
I have install VPN and it connects very well with no problems just for the connection itself.
But if I check using www.whatismyIPaddress.com, he demonstrated local IP address that they got by their ISP not CISCO ASA 5505 outside the interface.
The problem is unlike Microsoft ISA 2006 VPN which shows the external public IP address when a client connects to the VPN server, Cisco vpn client shows that it is the local IP address that is not in its list in the Government site.
I'm more like Ms. guy then Cisco as I did ' t have a lot of chances to play with Cisco, sorry about that.
Is that what I missed in the middle of config or needs a setting more to achieve this?
How can I make client VPN to show it's IP address to the interface of Cisco ASA rather than the IP address of the local ISP?
Thanks in advance,
Charlie
have you added "same-security-traffic permit intra-interface" like I said in the previous post?
-
VPN client and redundant peering
Hello world
PC user's config with remote access VPN client.
Tell the client pc has the configuration of the VPN client with backup servers and if ASA primary is the stop will be the secondary question of the new IP address of the client VPN gateway
address automatically?
Here the SAA is not in any failover mode.
Concerning
The list of backup server is used when establishing a new VPN connection. If it the customer has an active connection and the VPN server is no longer available then the user will have to re-establish the connection manually.
--
Please do not forget to rate and choose a good answer
-
PIX: Cisco VPN Client connects but no routing
Hello
We have a Cisco PIX 515 with software 7.1 (2). He accepts Cisco VPN Client connections with no problems, but no routing does to internal networks directly connected to the PIX. For example, my PC is affected by the IP 172.16.2.57 and then ping does not respond to internal Windows server 172.16.0.12 or trying to RDP. The most irritating thing is that these attempts are recorded in the system log, but always ended with "SYN timeout", as follows:
2009-01-06 23:23:01 Local4.Info 217.15.42.214% 302013-6-PIX: built 3315917 for incoming TCP connections (172.16.2.57/1283) outside:172.16.2.57/1283 inside: ALAI2 / 3389 (ALAI2/3389)
2009-01-06 23:23:31 Local4.Info 217.15.42.214% 302014-6-PIX: TCP connection disassembly 3315917 for outside:172.16.2.57/1283 inside: ALAI2 / 3389 duration 0:00:30 bytes 0 SYN Timeout
2009-01-06 23:23:31 Local4.Debug 217.15.42.214% 7-PIX-609002: duration of disassembly-outside local host: 172.16.2.57 0:00:30
We tried to activate and deactivate "nat-control", "permit same-security-traffic inter-interface" and "permit same-security-traffic intra-interface", but the results are the same: the VPN connection is successfully established, but remote clients cannot reach the internal servers.
I enclose the training concerned in order to understand the problem:
interface Ethernet0
Speed 100
full duplex
nameif outside
security-level 0
IP address xx.yy.zz.tt 255.255.255.240
!
interface Ethernet1
nameif inside
security-level 100
172.16.0.1 IP address 255.255.255.0
!
access extensive list ip 172.16.0.0 inside_nat0_outbound allow 255.255.255.0 172.16.2.56 255.255.255.248
!
access extensive list ip 172.16.0.0 outside_cryptomap_dyn_20 allow 255.255.255.0 172.16.2.56 255.255.255.248
!
VPN_client_group_splitTunnelAcl list standard access allowed 172.16.0.0 255.255.255.0
!
IP local pool pool_vpn_clientes 172.16.2.57 - 172.16.2.62 mask 255.255.255.248
!
NAT-control
Global xx.yy.zz.tt 12 (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 12 172.16.0.12 255.255.255.255
!
internal VPN_clientes group strategy
attributes of Group Policy VPN_clientes
xxyyzz.NET value by default-field
internal VPN_client_group group strategy
attributes of Group Policy VPN_client_group
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list VPN_client_group_splitTunnelAcl
xxyyzz.local value by default-field
!
I join all the details of the cryptographic algorithms because the VPN is successfully completed, as I said at the beginning. In addition, routing tables are irrelevant in my opinion, because the inaccessible hosts are directly connected to the internal LAN of the PIX 515.
Thank you very much.
can you confirm asa have NAT traversal allow otherwise, activate it in asa and vpn clients try again.
PIX / ASA 7.1 and earlier versions
PIX (config) #isakmp nat-traversal 20
PIX / ASA 7.2 (1) and later versions
PIX (config) #crypto isakmp nat-traversal 20
-
Cisco vpn client to connect but can not access to the internal network
Hi all
I have a VPN configured on cisco 5540. My vpn was working fine, but suddenly there is a question that the cisco vpn client to connect but can not access to the internal network
Any help would be much appreciated.
Hi Samir,
I suggest that you go to the ASA and check the configuration to make sure that it complies with the requirements according to the reference below link:
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00805734ae.shtml
(The link above includes split tunneling, but this is just an option.
Please paste the output of "sh cry ipsec his" here so that we can check if phase 2 is properly trained. I would say as you go to IPSEC vpn client on your PC and check increment in packets sent and received in the window 'status '.
Let me know if this can help,
See you soon,.
Christian V
-
multi-site VPN with just the cisco vpn client
Hello everyone
Please I need your help.
We have a headquarters office and up to 60 is BranchOffice, we want to create VPN network between its. so let's deploy 2 router cisco esy vpn server with HA (HSRP) at the Headquarters Office and all branches have Connection ADSL and they will use just the cisco vpn client to connect to the Headquarters Office.
My question is: is it possible to do it just with the client vpn cisco without purchased for any exercise bracnh a cisco router to create an ipsec tunnel because it is so expensive?
It depends on if the routers to offices can handle NAT with several internal VPN clients to 1 IP address. Most of the new material should be fine. Keep in mind the maximum limit of the VPN client, with 60 agencies and 5 people each of whom you are above the limit.
Michael
Please note all useful posts
-
Hello
I have a Cisco 2821 and ASA 5510 VPN router in my network.
Our remote users are using Cisco VPN Client 5.0.07 and I need to track on a server and keep their login information to generate reports for my manager.
Could you please let me know how I can do this trick of surveillance?
Thank you
Mike
It can be done by choosing one of three types of monitoring of the performance of the VPN:
http://www.Cisco.com/en/us/docs/net_mgmt/vpn_solutions_center/1.1/user/guide/VPN_UG5.html
I hope this helps!
-
False claims RADIUS of customer VPN Cisco ASA 5510
Hello world
I use the Cisco VPN client 5.0.7 and Cisco ASA 5510 (7.4 and 8.4.2) VPN RAS solution. Clients are authenticated using certificates and RADIUS AAA (ACS 3.3) and AD.
Each time, when the client connects, ASA 2 RADIUS requests questions, correct first - which is successfully authenticated by FAC and immediately - second that always fails. I couldn't find information related to this strange behaivor. Function "Double Authentication" (more sympathetic to his name) is only accessible to Anyconnect customers who we do not. When I'm authenicated by using password group, there is only one query RADIUS.
What is the source of such behavior?
The negative impact is that my logs are filled with the failed authentication attempts fallacious and users are incrementig attempts failed in the AD meter.
Debugging of ASA:
-First application-
RDS 2011-10-24 16:16:01 0232 14884 request code 172.16.8.1:1645 host = 1 id = 22, length = 145 on port 1025
RDS 2011-10-24 16:16:01 I 2519 14884 [001] value of username: User1
RDS 2011-10-24 16:16:01 I 2519 14884 [002] value username-password: 2D A9 B2 D0 15 5F 1E B8 BB DB 3A 38 F5 24 72 B5
RDS 2011-10-24 16:16:01 I 2538 14884 [005] NAS-Port value:-1072693248
RDS 2011-10-24 16:16:01 I 2538 14884 [006] Type of Service value: 2
RDS 2011-10-24 16:16:01 I 2538 14884 [007] value Framed-Protocol: 1
RDS 2011-10-24 16:16:01 I 2519 14884 [030] value Called-Station-Id: 172.16.8.1
RDS 2011-10-24 16:16:01 I 2519 14884 [031] value of Calling-Station-Id: 10.4.14.14
RDS 2011-10-24 16:16:01 I 2538 14884 [061] NAS-Port-Type value: 5
RDS 2011-10-24 16:16:01 I 2533 14884 [066] Tunnel-Client-Endpoint value: [T1] 10.4.14.14
RDS 2011-10-24 16:16:01 I 14884 2556 [004] value of NAS-IP-Address: 172.16.8.1
RDS 2011-10-24 16:16:01 I 2561 14884 [026] Vendor-Specific vsa id: 9
RDS 2011-10-24 16:16:01 I 2596 14884 [001] cisco-av-pair value: ip:source - ip = 10.4.14.14
RDS 2011-10-24 16:16:01 I 0282 14884 ExtensionPoint: run the configured scan extension points...
RDS 2011-10-24 16:16:01 I 0314 14884 ExtensionPoint: advertising [AuthenticationExtension] provider [Cisco EAP generic]
RDS 2011-10-24 16:16:01 I 0763 14884 ExtensionPoint: Message-[generic EAP] lack of EAP, ignorant...
RDS 2011-10-24 16:16:01 I 0319 14884 ExtensionPoint: [GenericEAP.dll-> AuthenticationExtension] returned [1 - ignored]
RDS 2011-10-24 16:16:01 I 0314 14884 ExtensionPoint: asking provider [Download Cisco ACL] [AuthenticationExtension]
RDS 2011-10-24 16:16:01 I 0763 14884 ExtensionPoint: [DnldACLs] asking not a download of ACL, ignorant...
RDS 2011-10-24 16:16:01 I 0319 14884 ExtensionPoint: [DnldACLs.dll-> AuthenticationExtension] returned [1 - ignored]
RDS 2011-10-24 16:16:02 I 14884 0475 AuthorExtensionPoint: run the configured scan extension points...
RDS 2011-10-24 16:16:02 I 14884 0507 AuthorExtensionPoint: requesting provider [Download Cisco ACL] [AuthorisationExtension]
RDS 2011-10-24 16:16:02 I 0763 14884 ExtensionPoint: looking for ACL from [DnldACLs] to [user1]
RDS 2011-10-24 16:16:02 I 0512 14884 AuthorExtensionPoint: [DnldACLs.dll-> AuthorisationExtension] returned [1 - ignored]
RDS 2011-10-24 16:16:02 3360 14884 sent response code 2, id 22 to 172.16.8.1 on port 1025
RDS 2011-10-24 16:16:02 I 2561 14884 [026] Vendor-Specific vsa id: 9
RDS 2011-10-24 16:16:02 I 2596 14884 [001] cisco-av-pair value: ip:addr - pool = vpnpool
RDS 2011-10-24 16:16:02 I 2561 14884 [026] Vendor-Specific vsa id: 9
RDS 2011-10-24 16:16:02 I 2596 14884 [001] cisco-av-pair value: ip:wins - servers = 10.2.9.12 10.3.9.10 10.4.2.202
RDS 2011-10-24 16:16:02 I 2561 14884 [026] Vendor-Specific vsa id: 9
RDS 2011-10-24 16:16:02 I 2596 14884 [001] cisco-av-pair value: IP: DNS-servers = 10.2.9.12 10.3.9.10 10.4.2.202
RDS 2011-10-24 16:16:02 I 2538 14884 [006] Type of Service value: 2
RDS 2011-10-24 16:16:02 I 2538 14884 [007] value Framed-Protocol: 1
RDS 2011-10-24 16:16:02 I 2538 14884 [013] box-Compression value: 1
RDS 2011-10-24 16:16:02 I 14884 2556 [008] value box-IP-Address: 255.255.255.254
RDS 2011-10-24 16:16:02 I 2519 14884 [025] value class: CISCOACS:002cb2a9/ac100801/3222274048
-The second request-
RDS 2011-10-24 16:16:02 0232 14884 request code 172.16.8.1:1645 host = 1 id = 23, length = 145 on port 1025
RDS 2011-10-24 16:16:02 I 2519 14884 [001] value of username: User1
RDS 2011-10-24 16:16:02 I 2519 14884 [002] value username-password: 06 EA 08 AB C7 8F 75 D0 A5 E5 AE B7 A8 1 48 96 b
RDS 2011-10-24 16:16:02 I 2538 14884 [005] NAS-Port value:-1072693248
RDS 2011-10-24 16:16:02 I 2538 14884 [006] Type of Service value: 2
RDS 2011-10-24 16:16:02 I 2538 14884 [007] value Framed-Protocol: 1
RDS 2011-10-24 16:16:02 I 2519 14884 [030] value Called-Station-Id: 172.16.8.1
RDS 2011-10-24 16:16:02 I 2519 14884 [031] value of Calling-Station-Id: 10.4.14.14
RDS 2011-10-24 16:16:02 I 2538 14884 [061] NAS-Port-Type value: 5
RDS 2011-10-24 16:16:02 I 2533 14884 [066] Tunnel-Client-Endpoint value: [T1] 10.4.14.14
RDS 2011-10-24 16:16:02 I 14884 2556 [004] value of NAS-IP-Address: 172.16.8.1
RDS 2011-10-24 16:16:02 I 2561 14884 [026] Vendor-Specific vsa id: 9
RDS 2011-10-24 16:16:02 I 2596 14884 [001] cisco-av-pair value: ip:source - ip = 10.4.14.14
RDS 2011-10-24 16:16:02 I 0282 14884 ExtensionPoint: run the configured scan extension points...
RDS 2011-10-24 16:16:02 I 0314 14884 ExtensionPoint: advertising [AuthenticationExtension] provider [Cisco EAP generic]
RDS 2011-10-24 16:16:02 I 0763 14884 ExtensionPoint: Message-[generic EAP] lack of EAP, ignorant...
RDS 2011-10-24 16:16:02 I 0319 14884 ExtensionPoint: [GenericEAP.dll-> AuthenticationExtension] returned [1 - ignored]
RDS 2011-10-24 16:16:02 I 0314 14884 ExtensionPoint: asking provider [Download Cisco ACL] [AuthenticationExtension]
RDS 2011-10-24 16:16:02 I 0763 14884 ExtensionPoint: [DnldACLs] asking not a download of ACL, ignorant...
RDS 2011-10-24 16:16:02 I 0319 14884 ExtensionPoint: [DnldACLs.dll-> AuthenticationExtension] returned [1 - ignored]
RDS 2011-10-24 16:16:02 P 2237 14884 user: User1 - Windows user unknown or invalid password
RDS 2011-10-24 16:16:02 3360 14884 sent response code 3, id 23 to 172.16.8.1 on port 1025
RDS 2011-10-24 16:16:02 I 2519 14884 [018] value Reply-Message: rejected...
RDS 2011-10-24 16:16:03 0232 14884 request code 10.2.47.200:1812 host = 1 id = 254, length = 227 on port 32769
RDS 2011-10-24 16:16:03 2788 14884 (VSA unknown Vendor ID 14179)
GBA debug:
-First application-
AUTH 24/10/2011 16:16:01 I 0365 13060 external DB [NTAuthenDLL.dll]: from [user01] user authentication
AUTH 24/10/2011 16:16:01 I 0365 13060 external DB [NTAuthenDLL.dll]: Windows authentication attempt for the user1 userAUTH 24/10/2011 16:16:02 I 0365 13060 external DB [NTAuthenDLL.dll]: authentication Windows successfully (by DCCORPMSK04)
AUTH 24/10/2011 16:16:02 I 0365 13060 external DB [NTAuthenDLL.dll]: information get RAS to the user user1 DCCORPMSK04-The second request-
AUTH 24/10/2011 16:16:02 I 0365 13060 external DB [NTAuthenDLL.dll]: from [user1] user authentication
AUTH 24/10/2011 16:16:02 I 0365 13060 external DB [NTAuthenDLL.dll]: Windows authentication attempt for the user1 user
AUTH 24/10/2011 16:16:02 0365 13060 external DB [NTAuthenDLL.dll]: Windows authentication FAILED (Error 1326 L)
AUTH 24/10/2011 16:16:02 I 0365 13060 external DB [NTAuthenDLL.dll]: retry authentication to the CORP domain
AUTH 24/10/2011 16:16:02 I 0365 13060 external DB [NTAuthenDLL.dll]: Windows authentication attempt for the user1 user
AUTH 24/10/2011 16:16:02 0365 13060 external DB [NTAuthenDLL.dll]: Windows authentication FAILED (Error 1326 L)The ASA config:
Crypto ikev1 allow outside
Crypto ikev1 allow inside
IKEv1 crypto ipsec-over-tcp port 10000
life 86400
IKEv1 crypto policy 65535
authentication rsa - sig
3des encryption
md5 hash
Group 2
life 86400!
internal Cert_auth group strategy
attributes of Group Policy Cert_auth
client ssl-VPN-tunnel-Protocol ikev1 l2tp ipsec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list aclVPN2
the address value vpnpool pools
rule of access-client-none!
attributes global-tunnel-group DefaultRAGroup
address (inside) vpnpool pool
address vpnpool pool
authentication-server-group RADIUS01
authorization-server-group RADIUS01
authorization-server-group (inside) RADIUS01
Group Policy - by default-Cert_auth!
RADIUS protocol AAA-server RADIUS01
AAA-server host 10.2.9.224 RADIUS01 (inside)
key *.
RADIUS-common-pw *.
AAA-server host 10.4.2.223 RADIUS01 (inside)
key *.Hello
It is a 'classic' error and has nothing to do with dual authentication, but rather with the fact that you do both radius and authorization of RADIUS authentication.
If you remove this line:
authorization-server-group RADIUS01
you will see that it starts to work properly
In short: when ASA no authorization of RADIUS, it sends a request to access radius with the username as a password, that's why you see the second application fails all the time.
This is because the RADIUS authorization is intended to be used when authentication happens using certificates (only) so there is no password.
Also note that within the RADIUS protocol, authentication and authorization are not separate things, both occur in a single step. So if the ASA makes the radius authentication, he already gets the user attributes in the authentication step and it makes no sense to also make a separate authorization stage (except in a few very rare scenario where you have 2 radius servers, one for authentication and another for permission).
HTH
Herbert
-
VPN site to site &; outdoor on ASA 5520 VPN client
Hi, I'm jonathan rivero.
I have an ASA 5520 Version 8.0 (2), I configured the site-to-site VPN and works very well, in the other device, I configured the VPN Client for remote users and works very well, but I try to cofigure 2 VPNs on ASA 5520 on the same outside interface and I have the line "outside_map interface card crypto outdoors (for VPN client). , but when I set up the "crypto map VPNL2L outside interface, it replaces the command', and so I can have only a single connection.
the executed show.
ASA1 (config) # sh run
: Saved
:
ASA Version 8.0 (2)
!
hostname ASA1
activate 7esAUjZmKQSFDCZX encrypted password
names of
!
interface Ethernet0/0
nameif inside
security-level 100
address 172.16.3.2 IP 255.255.255.0
!
interface Ethernet0/1
nameif outside
security-level 0
IP 200.20.20.1 255.255.255.0
!
interface Ethernet0/1.1
VLAN 1
nameif outside1
security-level 0
no ip address
!
interface Ethernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/4
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/5
Shutdown
No nameif
no level of security
no ip address
!
2KFQnbNIdI.2KYOU encrypted passwd
passive FTP mode
object-group, net-LAN
object-network 172.16.0.0 255.255.255.0
object-network 172.16.1.0 255.255.255.0
object-network 172.16.2.0 255.255.255.0
object-network 172.16.3.0 255.255.255.0
object-group, NET / remote
object-network 172.16.100.0 255.255.255.0
object-network 172.16.101.0 255.255.255.0
object-network 172.16.102.0 255.255.255.0
object-network 172.16.103.0 255.255.255.0
object-group network net-poolvpn
object-network 192.168.11.0 255.255.255.0
access list outside nat extended permit ip net local group object all
access-list extended sheep allowed ip local object-group net object-group net / remote
access-list extended sheep allowed ip local object-group net net poolvpn object-group
access-list splittun-vpngroup1 extended permitted ip local object-group net net poolvpn object-group
pager lines 24
Within 1500 MTU
Outside 1500 MTU
outside1 MTU 1500
IP local pool ippool 192.168.11.1 - 192.168.11.100 mask 255.255.255.0
no failover
ICMP unreachable rate-limit 100 burst-size 10
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0 access-list sheep
NAT (inside) 1 access list outside nat
Route outside 0.0.0.0 0.0.0.0 200.20.20.1 1
Route inside 172.16.0.0 255.255.255.0 172.16.3.2 1
Route inside 172.16.1.0 255.255.255.0 172.16.3.2 1
Route inside 172.16.2.0 255.255.255.0 172.16.3.2 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout, uauth 0:05:00 absolute
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
86400 seconds, duration of life crypto ipsec security association
Crypto ipsec kilobytes of life security-association 400000
Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA
card crypto VPNL2L 1 match for sheep
card crypto VPNL2L 1 set peer 200.30.30.1
VPNL2L 1 transform-set ESP-3DES-MD5 crypto card game
map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
outside_map interface card crypto outside
crypto isakmp identity address
crypto ISAKMP allow outside
crypto ISAKMP policy 20
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 65535
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
a basic threat threat detection
Statistics-list of access threat detection
!
!
internal vpngroup1 group policy
attributes of the strategy of group vpngroup1
banner value +++ welcome to Cisco Systems 7.0. +++
value of 192.168.0.1 DNS server 192.168.1.1
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value splittun-vpngroup1
value by default-ad domain - domain.local
Split-dns value ad - domain.local
the address value ippool pools
username password asa1 VRTlLlJ48/PoDKjS encrypted privilege 15
tunnel-group 200.30.30.1 type ipsec-l2l
IPSec-attributes tunnel-group 200.30.30.1
pre-shared-key *.
type tunnel-group vpngroup1 remote access
tunnel-group vpngroup1 General-attributes
ippool address pool
Group Policy - by default-vpngroup1
vpngroup1 group of tunnel ipsec-attributes
pre-shared-key *.
context of prompt hostname
Cryptochecksum:00000000000000000000000000000000
: end
ASA2 (config) #sh run
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
86400 seconds, duration of life crypto ipsec security association
Crypto ipsec kilobytes of life security-association 400000
card crypto VPNL2L 1 match for sheep
card crypto VPNL2L 1 set peer 200.30.30.1
VPNL2L 1 transform-set ESP-3DES-MD5 crypto card game
VPNL2L interface card crypto outside
crypto isakmp identity address
crypto ISAKMP allow outside
crypto ISAKMP policy 20
preshared authentication
3des encryption
md5 hash
Group 2
life 86400tunnel-group 200.30.30.1 type ipsec-l2l
IPSec-attributes tunnel-group 200.30.30.1
pre-shared key ciscomy topology:
I try with the following links, but did not work
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a0080912cfd.shtml
http://www.Cisco.com/en/us/products/ps6120/products_tech_note09186a00807e0aca.shtml
Best regards...
"" I thing both the force of the SAA with the new road outside, why is that? ".
without the road ASA pushes traffic inward, by default.
In any case, this must have been a learning experience.
Hopefully, this has been no help.
Please rate, all the helful post.
Thank you
Rizwan Muhammed.
-
VPN Client hurt...
Hello
I have a Cisco 1803 SDSL router which is connected to a SDSL connection.
I use the router to complete the VPN clients.
If I ask my crypto map to the dialer interface my VPN clients can connect okay and route for the local network without any problems.
If I apply my crypto card to my interface vlan 2 that is configured to use my IP my ISP currently assigned a 29 block my VPN clients can connect OK but cannot move to the local network or any other interface on the router outside the period of INVESTIGATION (Vlan 2 Interface) which puts an end to the customer.
I have the default route set to the dialer interface.
If I add a static route for the pool of IP addresses assigned to VPN Clients are routed to vlan2 I can ping the LAN, but get loads of packet loss.
If you need more info to help me please let me know
Thank you
Paul
Hi Paul
You can try the command below and verify?
Crypto card crypto-local-address Vlan2
http://www.Cisco.com/univercd/CC/TD/doc/product/software/ios124/124tcr/tsec_r/sec_c3ht.htm#wp1264087
regds
-
Two VPN clients remote need to Exchange resources through PIX501
I would like to have remote VPN clients ping each other and exchange their resiurces directly through pix501.
Is this possible? If so, how can I make it work?
With the current code of 6.x, u / shooting VPN traffic between sites or remote access clients is not possible, when this traffic ends on the same interface.
Pix 7.0 code is provided as a feature, which is scheduled for release in Q3.
Thank you
Peter
-
Cisco vpn client minimized in the taskbar and the rest in status: disconnect
I used 5.0.07.0240 cisco vpn client for 1 month with my pc under windows 7-64 bit. Worked well for 1 month. All of a sudden now when I double click the icon to start, VPN automatically minimizes to the taskbar with the disconnected state. It does not connect the option to hit or anything before it reduced to a minimum. I've not seen this before and no changes... but now it simply doesn't work. All solutions? Windows just patch automatically breaking cisco?
Unfortunately, cisco does not world class technical service... they called but no use.In my view, there is now a published version of the x 64 client, you need to download.If you suspect an update of Windows, why not try a system restore for a day, it wasworking correctly?On Wednesday, April 28, 2010 17:27:46 + 0000, akshay2112 wrote:> I used 5.0.07.0240 cisco vpn client for 1 month with my pc under windows 7-64 bit. Worked well for 1 month. All of a sudden now when I double click the icon to start, VPN automatically minimizes to the taskbar with the disconnected state. It does not connect the option to hit or anything before it reduced to a minimum. I've not seen this before and no changes... but now it simply doesn't work. All solutions? Windows just patch automatically breaking cisco? Unfortunately, cisco does not world class technical service... they called but no use.Barb Bowman www.digitalmediaphile.com
-
Cisco VPN Client and 64-Bit OS Support
I'm in the stages of planning/testing of migrating users to the Cisco VPN client. Problem that I came across well is that I can't find a version that supports 64-bit operating systems. I looked through the Download Center with no luck. I'm a little more looking for a version out there? Thanks in advance.
As much as I know there is no 64-bit support and is not yet on the roadmap of IPSEC VPN Client. For more details, see:
http://www.Cisco.com/en/us/docs/security/ASA/compatibility/ASA-VPN-compatibility.html
Concerning
Farrukh
Maybe you are looking for
-
How to check if someone else has signed in to my iCloud without knowing me?
If someone knows my password are able to connect to my account and access my messages/photos/notes etc without knowing me? Also is there a way to check where and when my iCloud account is connected? Thank you
-
Impossible to find all the drivers XP for Satellite Pro P200-15W
Hello everyone. I just installed XP Professional and now I have problems with some drivers. The laptop is a Satellite Pro P200 15W and the drivers are: Graphics card (specification says that it is an Ati Mobility Radeon HD2600, and I have not found t
-
Remember - this is a public forum so never post private information such as numbers of mail or telephone! Ideas: using microsoft producer for PowerPoint for syn Error messages Recent changes to your computer What you have already tried to solve the p
-
Trend Micro Internet Security will not uninstall
I have a new Windows 7 Professional 32 - bit Latitude E6500 that drives me crazy. It came with a trial version of Trend Micro Internet Security installed and it's not far, at least not with elegance. Here's what I've tried so far: Uninstall via progr
-
Tactile touchscreen Ghost by clicking (Dell XPS 17)
Hi all I went through many of the posts and forums. Have heard different solutions and I've tried a few, but there seems to be no improvement in this issue. As suggested by many, I didn't used to turn off my touch screen, spent $ 200 for this... Have