Class not registered error

How to solve the problem of unregistered class. I am not able to move to a single file or folder of the download folder. always shows unregistered class message. Please help me.

Hi Nilesh,

We need after the details so that we can better help you.

(1) what is the version of the Windows operating system installed on your computer?

(2) you are able to move files to or from any other place?

(3) don't you make changes to your computer before this problem?

Try to start your computer to the clean boot state where all Non Microsoft applications will be disabled to check if this problem is due to any third party application. To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

How to perform a clean boot in Windows

http://support.Microsoft.com/kb/929135

Note: Please refer to the section: How to reset the computer to start normally after a boot minimum troubleshooting section of Kb to start the computer to a normal startup after you fix the problem.

Let us know the status of the issue.

Tags: Windows

Similar Questions

  • displaying a class not registered error when you call of duty 2 on winds 7?

    whenever I tried to run the game it displays class not registered error

    You said launch, so this may not apply, but apparently, it happens to some people when
    install the game and the fix is not not to use the Autorun feature during installation.
    Go to start-computer and Open the disc. Then run setup.exe from there.

    I don't remember having this problem with COD2. It can only happen if you install to the default location
    Program Files (x 86).
    The game runs without problems on Win7 with no compatibility required setting.

  • Class not registered error cannot execute movie Maker

    Original title: Movie Maker

    My Movie Maker opens and then a window pops up and says class not registered, then it tells me that my collection has been cleared and it also won't let me import any media! Help, please!

    Hello

    1. what version of Movie Maker is installed on the computer?

    2. when exactly you get the error message?

    3 - is the error message pop-up while running other applications?

    4 did you last modified the software on the computer?

    Method 1:

    I suggest you to re - save the file and check

    (a) click Start

    (b) go to run

    (c) type CMD

    d) in the command prompt, type regsvr32 %windir%\system32 \qdv.dll

    Check if it helps.

    Method 2:

    I also suggest to run the System File Checker analysis and check if it helps.

    (a) click Start

    (b) go To run

    (c) type CMD

    d) on the command line type sfc / scannow

    Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

    http://support.Microsoft.com/kb/310747

    You can also provide us with more information for help, or if the problem is specific to Windows Movie Maker, you can view the query to:

    http://answers.Microsoft.com/en-us/windowslive/Forum/MovieMaker?tab=all

    I hope this helps.

  • Class not registered when connecting to the Express Edition


    On my laptop I was able to install the 11.2.0.2.1 XE and Developer SQL 4.0.1.

    TNSNAMES. ORA is properly configured, the SQLPlus and SQL Developer therefore have access to the database, I can create tablespaces, users, tables, etc. SQLDeveloper connects using the TNSNAMES file. ORA.

    XE =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP) (HOST = PORTLEKU)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = XE)
    )
    )

    FITTING_SERVICE =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP) (HOST = PORTLEKU)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = XE)
    )
    )

    However, when I run my application program, "Fitting.EXE", it gives me a 'Class not registered' error message when I run Connection.DoConnect.

    The connection string is configured to connect through OLE DB, use Fitting_Service as data source. This is known to work, such that the program works correctly on my desktop PC that is running Oracle 10 g with OLE DB and is used to compile and link the executable file (the laptop has no software development).

    My first thoughts on this problem are:

    (1) I need ODAC on the laptop. But that creates a new home of the Oracle, is not?  So if I set up the TNSNAMES file. ORA in this new folder tree, how it can reach the server database on the same PC, a server that already has a listener configured and known to work as SQLDeveloper can see the database. There is already a TNSNAMES file. ORA files in the tree of files server and properly configured. If I install a new listener, don't he substitute somehow the existing one, may break the connection that uses SQLDeveloper?

    (2) the program Fitting.EXE has been linked on a system with 10 g and the corresponding OLE DB software. Perhaps it is impossible to connect to an 11g database, either by an OLE DB 11g if I install it to ODAC 11.2.0.2.1? I have not yet tried ODAC installation because I was afraid to disturb something that works - see already 1) above.

    As you can probably guess, I'm a little lost on this and need someone to point me in the right direction instead of groping in the dark.

    --

    JF

    Success, finally!

    Take your index on copying tnsnames alias in the client tnsnames file, I installed ODAC112021 and did just that. It works amazingly!

    Problem solved. Thank you.

    Plomong

  • Service of autoconfiguration WLAN error 0 x 80040154: class not registered

    My laptop running Vista Home Premium SP2 will not display networks wireless scope.   The WLAN auto configuration service not started and an attempt to start manually returns the error "0 x 80040154: class not registered."   There has been no recent software installations, he simply stopped overnight for no apparent reason.   I searched the Internet and found many cases of this problem but no solutions that work.

    Hello

    Option 1: You can try to run the System File Checker, it will analyze the system-protected files and replace the incorrect versions with correct versions of the files Microsoft.

    Open an elevated command prompt. To do this, click Start, click all programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

    Type the following command and press ENTER: sfc/scannow

    Option 2: The issue can also be caused by your security program as an antivirus or a firewall of Windows /Defender that can have conflicting settings as to not not to perform certain tasks. I suggest you disable temporary antivirus and firewalls and recheck the result.

    Enable or disable Windows Firewall

    http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

    You must enable security programs new that had disabled you

    Option 3: I suggest you to check the boot issue and check.

    http://support.Microsoft.com/kb/929135

    Note: Please follow step No 7 from the link above to put the computer don't return to normal startup.

  • Chrome error: "class not registered".

    I changed my default browser Chrome to IE then back to Chrome and since then have been do this error "class not registered". I have uninstalled/installed and the same error persists. Any help is very appreciated. Thank you!

    Unfortunately, Keith suggestion has not worked for me either.

    What ended up working for me are the following steps:

    1 hit CTRL + R and type "misconfig".

    2. on the Startup tab, click on "Open the Task Manager.

    3. When this window is open, right click on Google Chrome

    4. click on Properties, then open the compatibility tab

    5. press on "run the resolution of compatibility issues.

    From this point, Windows should resume, searching for issues. It should detect and difficulty and go directly to the application allows you to test whether the program works.

    After that I did it, it worked for me. If all goes well, it does the same thing for you!

  • MovieMaker error message - class not registered

    Hello. Hope you are doing well today.  :-)

    I am new to Windows Moviemaker.  I want to use the webcam is installed on my laptop ASUS K55A to record a video and have Moviemaker capture him.  I use Windows 8.  I use the video Capture Wizard and it recognizes the camera into my laptop. When I come to what I think is the last screen of the wizard, I get the error message - 'class not registered '.

    Please help me. Thank you.  Take care and have a nice day.  :-)  Barbara Blais

    Open the Prompt.In command box type in cmd or press Win Key + R, and then in the search box, type cmd and press ENTER.

    In the command prompt window copy / paste after command: -.

    regsvr32 %windir%\system32\qdv.dll

    Press the Enter key.

    You should see: -.

    DllRegisterServer in C:\WINDOWS\system32\qdv.dll successful.

  • Class not registered. MovieMaker error message. Also clip-player shake trying to start, but never does. Is - this memory?

    Always 'class not registered' is the answer to why MovieMaker cannot import as many files. I finally realized that if I have all the "Windows"associated files with QuickTime (which I do often because QuickTime Pro has been my editor that works, but I wish you MovieMaker to work because he has a different user interface that doesn't have a QuickTime Pro and it also looks like a very good program)

    Well of course MovieMaker will say that he has not "registered class. But then I associate any Windows, and I use Windows Media Player on Windows media files (it is a ball game all nother as to why PhotoStory3 will not identify ANYTHING either import in Windows Media Player and its unbearable playlists because (sorry but really... Windows how much a control freak should we be?)) Windows Media Player is a great product but the playlists and psycho how they are and how they control much else if you don't have them good... I want to say that I classify even not my media as Playlists insist!  He drives me crazy that they will sort not even by directory!  OK OK... Sorry... but these are really statements and probably a reason why people eventually switch to Mac. Windows Media Player wants to control how PhotoStory3 works and opens to your media... he wants to sort that you want to associate with it in a way that is so incredibly frustrating and it moves all the time, so that you don't know what's left in an archive it seems always continually come up with... UGH)

    Yes, back to Movie Maker. Sorry... but it turns out that Movie Maker also does not seem to recognize any "class" of files that it needs to import easily. My WMV files and *.wma and.. *.avi. but he says: "class not registered". And believe me, that I am registered in each file that appears to be a DLL "library", which I guess MovieMaker can make reference. I'm out of my element when it comes to talk about these 'libraries' and controls, but I signed repeatedly 5 main DLLs in Movie Maker as well as the outside System32 DLL which seem to have an impact on it.

    I have trouble while registering the 3 final files into MovieMaker that all look the same. I keep holding out that maybe this will be the trick to get MovieMaker to work. At LEAST for the mounting clip player to operate. Does anyone know where this video player is native of...... It is also associated with Windows Media Player. And as I'm probably suspect... what I find the most space on my computer or go buy more memory (there is no place to install more unless I probably get a new computer) to get this video player to work.

    So the *.dlls 3 in MovieMaker can't register are:

    C:\WINDOWS\system32\regsvr32.exe C:\Program Movie Maker\wmm2eres.dll
    C:\WINDOWS\system32\regsvr32.exe C:\Program Movie Maker\wmm2res2.dll
    C:\Program Movie Maker\wmm2res.dll C:\WINDOWS\system32\regsvr32.exe

    AND that's just ONE of the many ways that I tried to save them. But they come with a 'success'

    And finally the codecs associated with MovieMaker. I even went into this program identification codec under DirectX diagnosis... "Softella Filter Manager" or something like that... and I poured through it and find all instances of the MovieMaker filter DLL and I have reUpped its relevance in each case his link with some codec. I don't know exactly what I'm saying here but in the list of codecs and filters... so many things related or listed with the MovieMaker wmm2filt.dll - they were designated never "use".  And I clicked on them which has arisen again. All that that means I don't know but I thought she would at least give feedback in the program and tell him... It is used.

    Sorry for my long rant. I obviously do not include programming that much, but I tour and research about and I was out with these two programs (Windows MovieMaker 2.1 and 3.1 PhotoStory) for a month or more... trying to make them work.

    Any tips would be appreciated if you bother to do so through my rants.
    Thank you

    Hello Brianeclus,

    Thank you for your message.  With regard to the registration of the dll in your system.  Please, try the method explained in the link below.
    Please let us know if it did or did not help to solve your problem.
    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • error message "class not registered" of Explorer.exe.

    When I click on the Start button and then on the shortcuts "Panel configuration, computer, documents, etc", I get an errot message Explorer.EXE that says 'class not registered '.  Can someone tell me how to solve this problem?  I'm not sure but I think the problem may have started after a few updates have been installed last week. I use Windows Vista if that helps.  Thank you

    Hello

    Make sure that all instances of Windows Explorer are closed.

    Go to start programs/accessories, right click on the "command line" and select the option 'run as administrator '.

    In the command prompt window, type the following command exactly as indicated.

    regsvr32 ExplorerFrame.dll

    Press ENTER.

    You should see a message of 'successful '. Close the command prompt.

    Restart the computer and try to open these components.

    If this does not resolve the problem, I suggest you use system restore to go back to a point before the problem first occurred.

  • Class not registered (Exception from HRESULT: 0 x 80040154 (REGDB_E_CLASSNOTREG)) VS2013

    Class not registered (Exception from HRESULT: 0 x 80040154 (REGDB_E_CLASSNOTREG))
     
    Instances of this error (2)
    1. Hide the call stack
    at System.Windows.Forms.UnsafeNativeMethods.CoCreateInstance (Guid & clsid, object punkOuter, Int32 context, Guid & iid)
    at System.Windows.Forms.AxHost.CreateInstanceCore (Guid clsid)
    at System.Windows.Forms.AxHost.CreateInstance)
    at System.Windows.Forms.AxHost.GetOcxCreate)
    to System.Windows.Forms.AxHost.set_Site (ISite value)
    at System.ComponentModel.Container.Add (IComponent component, String name)
    at System.ComponentModel.Design.DesignerHost.PerformAdd (IComponent component, String name)
    at System.ComponentModel.Design.DesignerHost.System.ComponentModel.Design.IDesignerHost.CreateComponent (Type componentType, String name)
    at System.ComponentModel.Design.Serialization.DesignerSerializationManager.CreateInstance (Type type, ICollection arguments, String name, Boolean addToContainer)
    at System.ComponentModel.Design.Serialization.DesignerSerializationManager.System.ComponentModel.Design.Serialization.IDesignerSerializationManager.CreateInstance (Type type, ICollection arguments, String name, Boolean addToContainer)
    at System.ComponentModel.Design.Serialization.CodeDomSerializerBase.DeserializeInstance (IDesignerSerializationManager Manager, Type type, Object [] parameters, String name, Boolean addToContainer)
    at System.ComponentModel.Design.Serialization.ComponentCodeDomSerializer.DeserializeInstance (IDesignerSerializationManager Manager, Type type, Object [] parameters, String name, Boolean addToContainer)
    at System.ComponentModel.Design.Serialization.CodeDomSerializerBase.DeserializeExpression (IDesignerSerializationManager Manager, String name, CodeExpression expression)
    at System.ComponentModel.Design.Serialization.CodeDomSerializer.DeserializeStatementToInstance (IDesignerSerializationManager Manager, the CodeStatement statement)
    at System.ComponentModel.Design.Serialization.CodeDomSerializer.Deserialize (IDesignerSerializationManager Manager, Object codeObject)
    at System.Windows.Forms.Design.ControlCodeDomSerializer.Deserialize (IDesignerSerializationManager Manager, Object codeObject)

    at System.ComponentModel.Design.Serialization.TypeCodeDomSerializer.DeserializeName (IDesignerSerializationManager Manager, String name, CodeStatementCollection statements)
    2. Hide the call stack
    at System.Windows.Forms.UnsafeNativeMethods.CoCreateInstance (Guid & clsid, object punkOuter, Int32 context, Guid & iid)
    at System.Windows.Forms.AxHost.CreateInstanceCore (Guid clsid)
    at System.Windows.Forms.AxHost.CreateInstance)
    at System.Windows.Forms.AxHost.GetOcxCreate)
    at System.Windows.Forms.AxHost.TransitionUpTo (Int32 State)
    at System.Windows.Forms.AxHost.CreateHandle)
    at System.Windows.Forms.Control.CreateControl (Boolean fIgnoreVisible)
    at System.Windows.Forms.Control.CreateControl)
    to System.Windows.Forms.Control.ControlCollection.Add (order value)
    to System.Windows.Forms.Form.ControlCollection.Add (order value)
    to System.Windows.Forms.Design.ControlDesigner.DesignerControlCollection.Add (Ctrl c)

    This error came from nowhere without changing anything since the last time I opened the project. Please help as he owes a lot to restart and not be hurt:/

    Hello

    Thanks for posting in the Microsoft Community. I understand your concern and I am happy to help you.

    This post is more appropriate for the Forums of Microsoft Visual studio. Thanks for posting your request on this Forum: https://social.msdn.microsoft.com/Forums/vstudio/en-US/home

    Kind regards

    Joy Kemprai

  • Can not backup on external hard drive telling me ' (class not registered (80040154 x)).

    I saved on this disc hard before that there is a lot of space on the left, but it is fair to give me the error class not registered (0 x 80040154)

    Hello

    1 did you changes to the computer before the show?

    2. you are trying to perform the automatic backup in Windows Backup and Restore feature?

    3. Once you get this error message?

    4. What is the operating system installed on the computer?

    5. What is the brand and model of the hard drive?

     

    Method 1:

     

    Put the computer to boot and search for the issue.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.

    Method 2:

    Perform a SFC scan on your computer. Consult the following link:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    See also:

    Set up or change automatic backup settings

    http://Windows.Microsoft.com/en-us/Windows7/set-up-or-change-automatic-backup-settings

    http://Windows.Microsoft.com/en-us/Windows7/set-up-or-change-automatic-backup-settings

    Backup and restore: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

    I hope this helps.

  • Class not registered (0 x 80040154)

    I'm doing a backup of the system.  and I get the following error message:

    The backup application could not start due to an internal error: class not registered (0 x 80040154)
    Please check the configuration of your system and try again.

    I use Windows Vista Business Service Pack 1.
    I can fill a "backup files" without any error message.
    I have only this message when I try to fill a "backup system".

    What is corrupting this application, it's not worth it for me to re - install Windows Vista Business.  I don't have the recovery CD provided with my laptop.  These do not include a CD that allows me to do a "repair installation".

    So I'm giving up Windows computer backup.  I backed up my system with another program and delete the last Image Windows System.

    The new backup works fine.

  • Normaliz.dll was not found, Explorer does not 'Class not registered', and the restore points are gone

    I left the room for about 20 min then when I came back I got this error

    QPService.exe - Unable to locate component
    This Application has failed to start because Normaliz.dll was not found. Re-installing the application may fix the problem.

    Then I restarted and had the same problem.  If I click 'OK' and then I get "Quickplay Resident Program has stopped working," then the error box changes the same thing but for avast and when I click on it I get "avast!" Antivirus has stopped working. "Click again and"GrooveMonitor utility has stopped working ". That's about 10 programs until next stop errors.

    The Explorer is also not work, my computer, folders, windows update, and many many other programs won't open.  Whatever this either in the Explorer tells me 'class not registered '.

    What I tried:

    • System restore - but it says that I have no restore points.  I used to have dozens, I did a lot of myself, and I don't know where they went
    • I tried to download Normaliz.dll, but when I tried to extract it to System32 (following the instructions I found on the web) he's not here, he gets another error.  So I put it on the desktop but then realized that I can't move it anywhere because I can't pull the top of my work or the Explorer.  I also tried to go into the Task Manager and do 'New task', but if I type anything this either in or click on 'Browse' then I get the same error on Normaliz.dll and then Manager tasks becomes inadmissible and accidents.
    • I tried to go into safe mode and Explorer still does not work, "New task" in the Manager tasks still does not work and I still do not have restore points
    • I tried a few other recovery tools before start and none of them has contributed to

    A lot of what I've tried has been recommended by other people when I did some research on google, but most people seem to have this problem because of IE, but I don't use IE and haven't for months.  Also solutions that seem to work for them have not worked for me.  I can't understand what caused it because I have not downloaded anything recently and it just happened when I left the computer and came back later.

    Any help would be greatly appreciated, I don't really want to destroy everything and reload windows.

    This looks like a general Windows failure since all kinds of independent programs stopped working. I would like to begin the troubleshooting process by testing your hardware from the hard drive and RAM. The machine can also be overheating. You can do it yourself or take the machine to a local professional reputable (not a type of BigComputerStore/GeekSquad of the place).

    http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

    MS - MVP - Elephant Boy computers - don't panic!

  • HFM API - class not registered in the journal when you connect from another machine

    Hello

    I'm working on the HFM API, and I'm facing a problem that occurs only when I've run them from a machine that is not one on which is installed the HFM.

    What happens is that when I try to connect from a client machine (on which are installed the HFM customers) I get an error (which I can check on the HFMErrorLogViewer) indicating

    "Class not registered".

    The error is displayed in the error XML string some details, and I see in this xml code that the customer name calling HFM made its appearance in the Svr Field (which I assume is an acronym for 'server').

    I set up the connection using the method on an instance of the SetLogonInfoSSO called HsxClient and I opened the application using the OpenApplication method, which I am passing the name of the server as a parameter also. The connection works (ie: the object is not a null instance), but then I get this error 'Class' unregistered, on the CHsvcDataLoad.cpp of file on the server.

    Any suggestion is well accepted.

    Thank you

    bidi

    Hi, thank you all for the advice.

    The problem was that simply VB6 was not properly load the dll, I added, removing and adding them once again did the trick (happy to ignore the reasons too long as it works now).

    The problem, reported on the server was in fact, as says Chandra Bhojan-Oracle: a customer a, caused by wrong loading of the DLL.

    Thank you

    bidi

  • The event log online help cannot be displayed because the default browser could not be started. Class not registered

    Hello. I live in Brazil, Rio de Janeiro and already installed W8 Pro original Microsoft license.

    When I need to use the event online Help Viewer, a reception this message - the event log online help cannot be displayed because the default browser could not be started.  Class not registered.
    Help, please.
    Thank you
    Carlos.

    Hi Carlos,

    Thanks for posting your query in the Microsoft Community Forums.

    After the description of the question, I understand that you are not able to access the online help for Event Viewer.

    1. do you receive an error message when you try to open the online help for Event Viewer?
    2. who is the default browser on your computer?

    Method 1:


    "The event log online help" her will bring you to the following Web page:

    http://www.Microsoft.com/technet/support/ee/ee_basic.aspx

    I suggest you try to access the above mentioned Web page to see if it works.

    Method 2:

    You can see the article mentioned below for how to set Internet Explorer as default browser.

    Make Internet Explorer your default browser

    http://Windows.Microsoft.com/en-us/Internet-Explorer/make-IE-default-browser#IE=IE-10

    It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you

Maybe you are looking for