Classic Tween Points of Pivot replacement Issues

Similar Questions

• Error of classic Tween when you move the point of rotation

  Hello

  I created a character who is running with classic tweens.

  When I move the distant point from the center of rotation of a shape (in my case, the forms are legs and I would like to move the point of rotation to the basin so that the legs remain attached to the feet and body), animation between two keyframes will show the form or the other shutter upwards or downwards, not according to the planned trajectory. I hope this makes sense.

  Thank you in advance.

  This happens when the alignment point is different at the beginning and end of a Tween. You must keep the same.

• Classic Tween scaling issue

  I have two jpeg images which are converted for movie clip symbols. When you attempt to scale one of zero to infinity (zoom look), I apply the classic Tween and image zoom back over the top of my window of document instead of going outward. Is there something I can help to solve this problem? I think is on the symbol's registration point in the Center, but how do I know?

  Access to the coast for the edition and use the align tool to center the image point of alignment.

• Classic Tween is bad conduct (sometimes)

  Everybody get random situations where a classic Tween does not work properly? As he slides a symbol up onstage when there should only be rotating?

  I have a symbol interpolation between frames 1, 5 and 9. The movement between 1 and 5 looks like much but from 5 to 9, he decides to go out of the ride where it should "snap" the frame 9 8.

  The registration point / anchor changed in the frame of 9?  Keyframes with alignment points placed improperly can cause problems like this.

  To move the anchor point, use the transform tool to select your symbol; Then click and drag the white circle... it should align with Center & edges.  Make sure that it is in the same place on all chassis.

• HTML5 Canvas - Motion or classic tweens?

  First time ever using Flash - except that now it's animate CC!  Recess.

  In my project, I'm targeting out HTML5 Canvas for some online advertising that I do.

  By most data autour, the motion tweens are superior to classic tweens (you also get the whole thing graphic with anchor points, acceleration, etc.).  However, when I add a motion tween, I get this message in my outings when I post:

  "The motion tweens are published in the form of animations frame by frame. Use Classic tweens where possible. »

  ... Does that mean exactly?  I get the concept of a frame by frame animation, but I don't see how that would produce an output of HTML5.  I checked the JS, and it seems pretty normal with respect to the EaselJS code that is created.

  I would like to know why I get this message and if I should worry about this!  Thank you.

  A simple classic Tween will export to be a single line of Javascript. The same way as a motion tween may export as a large number of positionnelles data, for each image. But, if you customized in a classic Tween acceleration, CreateJS has trouble with him, perhaps because he cannot easily be described in Javascript.

  Either use simple interpolation and simple relaxation, with a classic tween, or you knock out and make the movement you really want with a motion tween and don't worry too much about the additional file size.

• What is the difference between the shape tween, classic Tween and motion tween

  What is the difference between the shape tween, classic Tween and motion tween

  Flash CS4 introduces the possibility to rotate and move objects on all 3 of the axis. (So the X which horizontally across the stage, the Z and Y that goes vertically along the stage going perpendicular to the scene, straight towards the viewer and off movement until the point.)

  A 3D interpolation is a motion tween where you rotate or move something on these lines.

  A standard classic Tween gives you only the ability to move and rotate along X and Y.

• Problems with classic Tween to alpha setting

  I feel really stupid, because I've done this before, but I'm having a helluva time fading graphics using the classic Tween Alpha settings.

  I add managers to set the range, import the image of the scene, convert to symbol, then insert keyframes where I want to go from 0 to 100% and 100% to zero.

  In general, what happens is one side works and the other is not using the same steps. So he jumps and fades out or vice versa. SOOOOO frustrating!

  I have searched the forum and looked at several tutorials and have not found an answer.

  Could someone Please post a simple step - by - step directions to do this in Flash CC?

  1. create the object or drag the object on the stage of the first image.

  2. Select this object to make a clip or another type of symbol object.

  3. move to another frame in the same layer, say 15 framework more away and create a second keyframe.

  4. move again and create a third keyframe.

  5. go on the first keyframe and do a right click, select Create a classic Tween.

  6. go to the second image key and do the same thing.

  7. at the second keyframe, select the object on the stage and change the alpha value for this object.

  8 play.

• Classic Tween problem!

  So I did an animation frame by frame of a man waving and wanted to do a little smoother animation. So I highlighted all the frames and clicked on create a classic Tween. But then I get a warning saying "motion tween will not take place on layers with dissociated shapes or layers with more than one group or a symbol. Can someone help me with this? Or please tell me a way to make my image with smoother animations?

  https://www.YouTube.com/watch?v=cDqEfvJ3JMQ

  https://www.INKLING.com/read/how-cheat-Adobe-Flash-CS6-Georgenes-1st/chapter-4/motion-and-classic-tweens

  Note that once you create a symbol, you can change its contents by double-clicking it or by selecting "Edit in place in the Edit menu.

• Problem of animation classic tween/embedded Flash CS4

  Hello

  I'm working on a project that requires me to use Classic tweens, and I'm having a problem with embedded animations stored inside the symbols for the characters.

  Let's say that I have set up a really simple animation with three keyframes.  On the first image, I ask the character, and in the properties panel, in a loop, I choose ' reading single image "and select a form of mouth integrated frame 15, then to frame 12, I ask the new character and this time defined the shape of the mouth for" play single image and select picture 16 for the shape of the mouth. "  Then duplicate frame 1 to frame of 24 for my third keyframe.  So far so good.

  As soon as I apply a classic tween, however, frame 12 will be is no longer display the mouth shape stored in frame 16, but will apply the attributes of the first frame of the animation and use the shape of mouth integrated framework 15.  What is more, if I can remove the interpolation, it still doesn't let me change the options in a loop (from chassis unique to play only once, for example) or displayed included frame.  So, essentially, I'm stuck with the included frame, I put on the first image and cannot change it.  The only way to get around this seems to actually create keyframes individual without apply a Tween and try to match the movement of this form for the rest of the animation on an image by image basis.

  If anyone knows how to work around this problem, I'd like to hear it (and if it does not make sense at all, please let me know).  Thank you!

  Rob

  Just in case someone comes across this and has the same problem, I found the problem.  In the properties panel under interpolation (which is active when you have selected interpolation), there is a default checked box called 'Sync '.  Unchecking allow you to create a discreet Tween spans-by-side.

• GREP search / replacement issue

  Hi all

  I'm new to GREP searches, but I had a lot of success in my current document (CS3). I'm running a problem now, however. I am trying to replace a manual coding with a paragraph style sheet and the paragraph (in this case italics) already applied character style leaves change when they are applied. For example in this sentence:

  "For what purpose, then, of conscience at all when it's in the main superfluous?

  changes made to the

  "For what purpose, then all conscience at all when he's in the main superfluowe?

  
  When I use my GREP search and replace. For the rest of this paragraph, the paragraph style is applied correctly, it is really strange to local formatting to be switching where it is applied.

  I searched the forums and haven't found anything on this issue, any ideas would be greatly appreciated.

  Thank you!

  I'm sorry to confirm your woes...

  It is a "bug" of sorts - you change the length of the text with your GREP, and ID forgotten somehow adjust formatting when text is deleted. I tried a few varieties because it usually works okay-ish, CS3, and CS4. With your sample, I couldn't remove even a single character without "moving" the formatting as well.

• updates downloaded after a restore to a point of control-main issues

  I was told to post here for a response:

  restored to a control point. was having bad to hang on to a router. could not "Uninstall" so I restored.
  After vista came back, I downloaded updates. one was a CIP service.
  He doesn't have the first two times, then took. given market according to the instructions.
  computer turned on and acted like it was scanning or something. the black screen, white letters. then he stopped on a 'file ':! Oxc01a001d! 37482/98395 (\registry\machine\components\deriveddata...).
  stuck there for more than an hour. I pushed the button to close hard. computer is relit and recommended a system restore. I said yes, and the same thing happened. stuck on the 'message' above.
  help please. (I have Vista Home Premium 64)

  update this morning: turn off the computer this morning and turned back on - now, after 3 hours of what he's trying to "Startup Repair", it is always taken in some kind of loop. He said: it's tempting to repairs. I did not change but for the black screen.

  all the answers?

  I was told to post here for a response:

  restored to a control point. was having bad to hang on to a router. could not "Uninstall" so I restored.
  After vista came back, I downloaded updates. one was a CIP service.
  He doesn't have the first two times, then took. given market according to the instructions.

  CrystalBall © SEZ...

  Free unlimited installation and compatibility support is available for Windows Vista until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• updates downloaded after restoring to a point of control-main issues

  I was told to post here for a response:

  restored to a control point. was having bad to hang on to a router. could not "Uninstall" so I restored.
  After vista came back, I downloaded updates. one was a CIP service.
  He doesn't have the first two times, then took. given market according to the instructions.
  computer turned on and acted like it was scanning or something. the black screen, white letters. then he stopped on a 'file ':! Oxc01a001d! 37482/98395 (\registry\machine\components\deriveddata...).
  stuck there for more than an hour. I pushed the button to close hard. computer is relit and recommended a system restore. I said yes, and the same thing happened. stuck on the 'message' above.
  help please. (I have Vista Home Premium 64)

  update this morning: turn off the computer this morning and turned back on - now, after 3 hours of what he's trying to "Startup Repair", it is always taken in some kind of loop. He said: it's tempting to repairs. I did not change but for the black screen.

  all the answers?

  You say that the last problem is that the power has been cut to 1/2 way when trying to load the files to use the Startup Repair disk.

  You have caused a failure of hardware in your computer by a power failure to him.

  About the State of the disk, you're here!
  We cannot see the disk, or judge what condition it is in...

  My advice is to contact the manufacturer of your computer, if under warranty.

  If it is under warranty, contact a local and trusted computer repair shop; NOT a great string of repair shops.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You can try an installation clean back to factory settings before proceeding with what precedes, but we do not know if it will work.

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  See you soon... Mick Murphy - Microsoft partner

• HP Pavilion dv7-1245dx hard drive replacement issue

  Can I use any manufacturer 2.5 "disk for this laptop?    Looking to upgrade to the bigger drive.   Not sure about the sata and sata II speeds rpm or cache sizes, or if they are important.   Thanks in advance.

  Currently: HITACHI HTS543232L9A300 320 GB 5400 RPM SATA 2.5 "8 MB Cache internal Hard Drive

  Will this drive work?  HITACHI Travelstar 2.5-inch 500 GB 7200 RPM SATA II 16 MB Cache hard drive internal

  You are the very welcome.

  You can buy a computer laptop 2.5 "SATA II HDD from anyone.

  I guess Hitachi is OK, but I'd go for it, if it was me...

  http://www.Newegg.com/product/product.aspx?item=N82E16822136856

  Paul

• 2112 WLan controller and Point of access LAP1042n issue

  Hello

  I recently bought a 2112 a Wlan controller a number of LAP1042n Ap of the AP will not join the command and the message I get in the console of the AP, it is that the AIR-WLC2100-K9-6-0-199-4.aes firmware does not support this model?  Can someone please verify that this is the case?

  Firmware AIR-WLC2100-K9-7-0-98-0.aes to overcome this problem?

  Thanks in advance

  David

  Yes, 7.0 doesn't suppoert he...

  CHECK THE RELEASE NOTES for more details...

  http://www.Cisco.com/en/us/docs/wireless/controller/release/notes/crn7.0.html

• Interpolation classic vs. motion tween

  Hello

  As someone new to the creation of banners of HTML5, I'm not sure what kind of interpolation should I use to make my web ads.

  I find much more pleasant to use for motion tweens, but Animate gives me a warning when I publish the file 'Motion tweens are published in the form of animations, image by image. Use Classic tweens where possible. »

  I found various tutorials which are of the opinion that the motion tweens are better and should be used preferably classic tweens, but what is missing for me is why one is better or worse than the other.

  What is a motion tween creates a larger load of CPU to run all "frame by frame" animation and classic Tween is not?

  Can someone please clear this up for me.

  Thank you

  Animation of scenario gets transformed in CreateJS Javascript. If you are creating tweens, you can see how it ends up looking. For a simple classic tween, it's a short line. For a custom ease classic tween, or a motion tween, animation of the same search takes a lot of lines. Basically, the length of the simple classic Tween multiplied by the number of frames in the animation.

  There are also many commands wait (1) consecutive, which can lead to poor performance.