Clean install of Vista professional stops on Satellite L300D

Similar Questions

• Did a clean install of Vista - cannot depend on an advocate, I am missing the updates?

  I did a clean install of Vista and thought that I did it correctly... but

  1. I can not turn on Windows Defender. It seems to hang and then I get the 0x800705b4 error message and that the delay expired.

  2. While diagnosing the original problem that finally forced me to do a clean install, PA bear MS MVP asked if I had a few specific updates. For example,.

  (a) KB2719177 [or KB2699988], KB2705219, KB2712808 & KB2731847;

  (b) KB2698365, KB2691442, KB2655992 & KB2719985 or maybe KB2721691;

  (c) KB2685939 and possibly KB2686833.

  (d) KB2658846, KB2659,262, KB2660649, KB2676,562, KB2688338, KB2690533 & KB2695962;

  (e) KB2644615, KB2393802 and especially KB971029.

  Those listed above, I have no

  (a) - KB2719177 [or KB2699988]

  (b) - KB2721691

  (d) -962 KB2695

  If I need to have these, how can I get them? I clicked check for updates and installed the updates until this process went more updated.

  Thanks in advance,

  -YT2252

  You are welcome.

  It was a fluke that I know where you are up with that in the previous question, I answered.

  MSE is the reason; It disables the Defender on the goal.

  Here are all the facts about it.

  http://answers.Microsoft.com/en-us/protect/Forum/MSE-protect_start/Windows-Defender-and-Microsoft-Security-Essentials/5309cb8d-02e1-40E8-974f-0dcedb9ab9fd

  I suggested msconfig and Autoruns, as defender is how Microsoft points you, change Vista startup programs.

  One day, you can stop a program starting at start-up That's why I've included these two links for you as no longer, you can use Defender to do.

  What about updates that you think are missing, it would depend on what you have reinstalled as to what you need. You have not found a message that it is an installation failed for them; you jump a list-type PA Bear for you.

  I would say that those particular updates you think you are missing, you may repost in the Windows Update Forum and go to the Attn: PA bear.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

  See you soon.

• clean install of Vista on an old drive hard ide after drive failure hard sata - oem version now get "the limited functionality" due to "unauthorized changes" had no problems for 3 years until this!

  I did a clean install of vista on an old drive hard ide after the disk sata hard down - (oem version) now get "feature limited" because of the "unauthorized modification" had no problems for 3 years until this!

  Hello

  It's a shame you don't know the exact name of the virus

  Malware can cause non-genuine messages appear

  but try this:

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Problems after doing a clean install of Vista Home Premium and service pack 2

  I see that others have the same problem as me, but there is no way to comment (that I can see) on the thread I've read.  After a lot of problems, I did a clean install of VISTA Home Premium (came with my Dell PC) and when I installed service pk2, all of the same problems that led me to do a clean install appeared.  I can't the computer to recognize and install the keyboard and the mouse of the blue tooth. (Don't tell me to contact the manufacturer, because they came w / the computer and say "Dell" on them!)  He told me that the enumerator does not work.  Then I launched Quicken, and when I tried to save a registry check for print, he gave me the msg "Quicken launcher has stopped working".  He was a key reason I did a clean install.  The only improvement is that I can at least open Quicken, which he would not let me do before.  How to uninstall service pack 2?

  http://support.Microsoft.com/kb/948537

  How to uninstall Windows Vista service packs as a troubleshooting step

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• HP a367c XP family, upgrade to clean install of Vista. Firmware upgrade must be done again

  I have two questions to do a clean install of Vista family premium on my HP a367c desktop pc came with XP home installed. I wiped the cause of hard drive corruption

  1. can I need to reinstall the firmware for a367c office updates, or others like bios, other ect.

  2. after vista Service Pack 1 can I use a cd/dvd with vista Service Pack 2 and that all are working properly, or do I have to do it all by windows update take hours and hours.

  Thank you

  plantingrichard

  plantingrichard wrote: I have two questions to do a clean install of Vista family premium on my HP a367c desktop pc came with XP home installed. I wiped the cause of hard drive corruption 1. I need to reinstall updates firmware for a367c office, or others such as bios, other ect. 2. after vista Service Pack 1 can I use a cd/dvd with vista Service Pack 2 and that all are working properly, or do I have to do it all by windows update take hours and hours. Thank you plantingrichard

  Hello plantingrichard, first of all, it would be useless to worry about Firmware updates, because data for these Firmware updates are stored in the devices that the firmware has been installed for.

  You may be able to restore the system with the feature of restoration of HP Recovery from the hard drive to the system startup and the F - 11 key when the HP Logo screen. Just as it was when shipped, it would put all HP applications on the system.

  You can then use the Vista DVD disk and perform an inplace of Windows Vista SP1 upgrade.

  If you don't want all HP applications, you can perform a new installation of Vista.

  You may be able to locate the Vista SP2, but I suggest the Windows Update site and download and install all updates including Vista SP2.

  If you have a DVD of Vista SP2, you can use it to upgrade or new installation. The Vista SP2 would have included in the DVD of Vista SP2 SP1 updates.

  As you suggest, it will take some time to complete, but you'd probably have a more stable system using this approach.

• Need to do a clean install of Vista - have several issues

  PA bear MS MVP suggested I do a clean install of Vista. I need a hand-holding.

  The first questions are about the instructions contained in this site:

  HOW to do a clean install of Vista: see the "to install Windows by performing a clean install" (or "reinstall Windows Vista") http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista article

  ISSUES;

  1. the site says have my Windows installation disc (CD or DVD). I don't have the installation disc, but I made the recovery discs. Can I use them instead?

  2. it is also said to disable all antivirus software before you install Windows. I have installed Microsoft Security Essentials. How can I disable it?

  3. to the question "where do you want to install Windows?" choose which partition?

  Thank you in advance,

  YT2252

  Hello.

  1. you can use the recovery disks you did to reinstall Vista. It's what they are for.

  To reinstall Vista using recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  2 as you do a new installation the hard disk will be wiped clean of the everyting: files, MSE, everything.

  Therefore, there is not need to disable the MSE.

  3. the recovery disks must select the disc / Partition and install Vista updates.

  If not. Select the c: / partition.

  See you soon.

• Re-install (clean install) Windows Vista Home Premium with no installation disc

  I have a laptop that is running Windows Vista. I would like to wipe the drive and reinstall Vista. The computer came preloaded with Vista and did not include the operating system installation diskettes. How would I be able to get the Vista installation diskettes? My computer is an Acer Aspire 5100. I am running Windows Vista Home Premium 32-bit (SP2).

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact Acer and ask them to send you a set of recovery disks.

  They should do this for a fee if they are still available.

  http://us-store.Acer.com/RCD/

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  With an Acer, it's "left Alt + F10 at startup".

  "How do I restore my computer using the eRecovery Management program outside of Windows?

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  See programs > Acer > then their eRecovery software stars for them.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon

• I try to install windows vista professional, but a message that I need a pilot. Where can I find?

  Need professional driver of hard disk for the installation of vista partition.

  I try to install windows vista professional.

  I want to partition the hard drive; However, it says I need a driver.

  Where can I find this driver?

  I have a dell optiplex 360.

  If you still cannot find a BIOS entries to change, try to create a Partition Wizard bootable CD and use it to create a partition.

  Partition Wizard Home Edition:
  http://www.partitionwizard.com/free-partition-manager.html
  Note: There is also a CD bootable or versions of the bootable Flash drive:
  CD: http://www.partitionwizard.com/partition-wizard-bootable-cd.html
  Flash player: http://www.partitionwizard.com/bootable-flash-drive.html
  Among the features and functions: create partition, Delete partition, format partition,.
  A partition resize, move partitions, Partition recovery after an accidental deletion,
  Convert the partition, partition Explore, Hide partition,
  Change the drive letter, a partition active Set, Explorer (content display) of the partition.
  Note: To complete any task use the "Pending Operations" box at the bottom left.

  J W Stuart: http://www.pagestart.com

• After clean install updates vista cause blue screen of death__

  After that a clean install of vista cds coming from the laptop of dell computer purchase fine until I install 80 updates of windows. I get blue screen when restarting updates but passes so fast, I can't pause to read. Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• XPS 420 - HARD drive failed, performing a clean install of Vista on the new HARD drive.

  Hey everybody,

  My on my XPS 420 HARD drive failed and I'm trying to reinstall Vista using the disc that came with my machine back when I bought it.

  I bought a new WD10EZEXAZ (1 TB Serial ATA HDD), he rose in the same dwelling as my old HDD (ST3750630AS * Barracuda 7200.11*). I start the PC and goto Setup, it recognizes the HARD drive in the blue menu.

  Then I boot with the CD of Vista that came with my system. I proceed as indicated through the following url:

  Clean install of Vista

  After its copied files, expanded the files, installed features, updates installed... it goes to "Complete Installation" and throws an error message: "Windows Setup could not configure Windows to run on a hardware on this computer."

  I tried a few things I've seen posted on the internet, including trying to run msoobe.exe via command line. When I did, it allows me to Setup user... but finally I get sent to this message of error or another telling me I have to reinstall Windows.

  I read else where some hard disks may not compatible with the Dell disk provides with my OEM machine. If this is the case, can someone advise? I really didn't want to spend $100 one another on a Windows 7 disc, but I feel like this may be my only option... but even in this case, I'm not so sure this will work or the other.

  Any help would be greatly appreciated,

  Tony

  UPDATE *.
  Did some more research, I discovered my new drive HARD is an advanced HDD format... not sure if it has nothing to do with my problems (by www.wdc.com/advformat Vista should not need to perform the work before the OS being installed), but thought I would mention it.

  Thanks again for any help.

  ****************

  Seems that I found the solution to my problem.

  Problem has been fixed by going into the BIOS and change the Mode of Port SATA to IDE/native/AHCI native. After that, the installation worked without any problems. Seems that Windows Setup did not like the port mode is set to RAID.

  Just thought I would post back everybody incase has had the same problem.

• Clean install of Vista, receive the error code: 0x80070005

  So I'm trying to do a clean install of Windows Vista, so I can clean all of my system files. I inserted the original disc supplied with my computer, installation is initiated, and then it stops and displays this error code: 0x80070005. That is to say that he does not communicate with the internet, which it is. I wonder how I should do my own insatll ASAP?

  Hi ClintBeastwood,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/Vista-SP2-will-not-install-error-0x80070005/1dd761d3-8632-457C-be8c-f880b883a61e

  I hope this helps!

• Clean install of Vista business does not recognize network rtl8101e map

  I have a Toshiba laptop that came with Vista Home Basic installed, the hard drive died so I bought a new one and found an unopened copy of Vista Professional SP1 and installed a clean place. Everything seems fine, except that it says that the necessary for a newer driver network card, I downloaded and copied from a memory stick and installed. It is said with the new driver initializes the driver, but the device does not work.

  Hi FatBrian81,

  I suggest to access the Web site Toshiba laptop and am trying to download the drivers for the network card for Windows Vista and try to install it and check if he moved very well.

  Access the link below and select the model number of the laptop you are trying to download the drivers for the network card.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  You can also open the Device Manager on your computer and search for errors in the device for the network card Manager and view the details in return. Access the link below and follow the steps to open the Device Manager on your computer.

  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

  I hope this helps. Let us know the result.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• CLEAN INSTALL XP HOME: PROBLEM, STOP NORMAL LOADING

  I'm doing a clean install of XP Home Edition on my desktop which had equipped the new XP and works now very slowly (2 years or almost since a clean installation by an engineer). The entire system was backed up on an external hard drive. Avast has been turned off. I'm following "perform a new installation of Windows XP" as found on windows.xpl.tripod.com. The installation disc is the original hologram MS, one of the desktop PC machine, loaded in the CD-ROM drive (CD / DVD:SM - BENQ) and I see ' what do you do? I also have a BENQ RW drive. Then I start and find that I need to press F11 for boot device menu. 1^st floppy drive, disk HARD etc. are available. Highlight CD / DVD:SM - BENQ DVD-ROM 16 X and press ENTER. I see "press any key to boot from the CD-ROM. Pressing space bar, delete etc. as lightning right now, it seems (even pressing fast and often before him appear in words) has failed after several attempts. The system simply loads Windows normally. I tried F2 at initial start-up, went to START the configuration utility and choose the BENQ SM for the 1^st Boot device, do F10 to save and exit. You press ENTER to accept OK. You press F11, highlighted once more the SM-BENQ and press ENTER. Yet once «press a key...» "is displayed. Key g tried and various other attempts. I do not see "Set up Windows XP", Windows loads just normally.

  Is there another "no" button I can press to stop the normal load?

  Is there another method to achieve the goal?

  I assume you are using resolution 3 in http://support.microsoft.com/kb/314060

  It is not guaranteed that the upperfilters and lowerfilters will be present. Just delete what is available and it should fix the problem.

  Tricky

• A clean install of vista home premium and it is given me an error message "cannot start 0 xC0000001.

  I do a new install of Vista Edition home premium and it gave me an error message "windows could not start, status: 0 xC0000001 ', even not all components of the computer are brand new and aparently work well, can someone point me in the right direction?

  Thank you

  Justin

  I try already and my system is configured to boot from the cd first dvd room.
  After that start the DVD vista sytem shows the error 'windows couldn't start error Oxc0000001.

  It is not a DVD - RW SATA is?

  If you need Intel drivers Matrix to exploit your readers to drive HARD and DVD - RW, DVD - RW SATA won't work properly (owners of Intel motherboard you lucky guys don't have this problem). Need to install drivers of matrix for the DVD - RW being recognized (the egg before the chicken scenerio), hence the need for an IDE DVD - RW.

  Second, make sure that the BIOS can identify your DVD player correctly. If shut down you the computer and it stops, stops and restarts when you restart the computer again, the BIOS has not yet saved the change of equipment.

• A clean install of Vista Home on new hard drive SATA does not end

  MAJOR problems, do a clean install of Windows Vista Home Premium 32 bit on a SATA hard drive. It takes 2 days for installation and at the end he hangs and won't start not even once again. Help!

  * original title - the IMPORTANT issues having a clean installation of Windows Vista Home Premium 32 bit on a hard dur.* of SATA

  Hi Zombie_206,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/Vista-install-problems/d3e9d959-db3e-44e9-8543-b730d7cf4399

  I hope this helps!