Clean install of windows 7 and firefox 4, java script works does not on various websites

Similar Questions

• I did a clean install of Windows XP Pro: Service Pack 1; Update will be not updated: 0x8024400A error

  I did a clean install of Windows XP Pro: Service Pack 1; Update will be not updated: 0x8024400A error

  Pass on several machines, cannot not run fix - it because I don't have the right to service pack cannot update the service pack because I can't update because of the 0x8024400A error

  About to panic. Could use some real help on this and not only refers to

  http://support.Microsoft.com/kb/836941

  The computer is a Dell Optiplex GX280

  What I installed is the chipset & drivers for the controller of the motherboard & ethernet.

  Internet works fine on the device, I am writing to you from him.

  Also, tried installing IE8 on one computer and run windows update, same error.

  I did a clean install of Windows XP Pro: Service Pack 1; Update will be not updated: 0x8024400A error

  Pass on several machines, cannot not run fix - it because I don't have the right to service pack cannot update the service pack because I can't update because of the 0x8024400A error

  About to panic. Could use some real help on this and not only refers to
  http://support.Microsoft.com/kb/836941

  The computer is a Dell Optiplex GX280

  What I installed is the chipset & drivers for the controller of the motherboard & ethernet.
  Internet works fine on the device, I am writing to you from him.

  Also, tried installing IE8 on one computer and run windows update, same error.

  Relax and breathe.

  FIRST: Uninstall IE8 and IE7 if they are installed.  Back to all the way back to IE6.  You want other patches before you get those.  Reboot after doing this.

  You are not the first to ask questions about how to upgrade a clean Windows XP - not even installation in the last week. In fact, I will just cut and paste my answer here... here:

  Get SP2 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Get SP3 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Download at least Internet Explorer 7 (if it is not Internet Explorer 8).

  Install it.

  Reset.

  Now, try to get the updates through the normal web page (http://windowsupdate.microsoft.com/) and see how much more you can get (100 +) and keep checking until you no longer have.

  Back - let everyone know if it worked for you.

• I want to do a clean install of windows xp on a hp compaq nx6125 but do not all disks with the laptop but I still have the original windows sticker on the bottom.

  I need to reinstall xp on my nx6125

  I want to do a clean install of windows xp on a hp compaq nx6125 but do not all disks with the laptop but I still have the original windows sticker on the bottom. is this possible or do I have to buy another drive xp and sticker

  Hello

  Yes, you can use this COST to install Windows XP. However, you must have Windows XP.
   
  If you face any problem regarding the installation of Windows XP.
  You can contact our Windows activation service.
  Here is the link:
  http://support.Microsoft.com/kb/950929 

• I have LR 6 (upgrade LR 5and4) installed on Windows PC and switch to Mac. It will not install on Mac since the earlier version is installed. Is there a solution?

  I have LR 6 (upgrade LR 5and4) installed on Windows PC and switch to Mac. It will not install on Mac since the earlier version is installed. Is there a solution?

  Update should allow you to enter the serial number of the previous version during the installation

  If this does not work, you must communicate directly with Adobe

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• with firefox 43 yahoo and yahoo mail doesn't work does not correctly

  With the help of win 7 and firefox 43.0.1, I have 4 computers and now all have problems with yahoo and yahoo mail doesn't work does not correctly. Loading sites, but most of the features are missing and clicking on what whether changes to the lists of text. I have disabled flash / anti-spam etc., cleared cookies and cache and even firefox loaded down once again and have upgraded, no help. I'm forced to use IE now.

  I tried Yahoo support, they said try Firefox... In any case, it's Firefox and I found a solution using the 'Refresh Firefox' button. Whatever the problem was fixed on two of my computers so far. Got to update my setting again but it's 10 m, compared to the 10 hours I spent trying all that is nothing.

  Thanks for the help!

• Clean install of Windows 8 and Windows 7

  How do a clean install of windows 8 on a 7 hp windows computer. and how can you do a system recovery

  without having to install all other unwanted. Just the Windows 8 or Windows 7 works.

  It seems like HP won't install us just the OS.

  answer please.

  I'm glad you found it useful.

  Pre-ignition works for Windows 8, but it is slightly different. In Vista and 7, all of the computers Dell with Windows 7 Edition home premium for example turned on and had the same product key. They also come with Windows 7 modes of action that had a unique product key (the key of SLP). I also think that a Dell DVD could not be used on a HP and vice versa. Modes of action were of poor quality and prone to fading. In Windows 8, there is a unique product key into the system BIOS that supports the DVD (or MSDN/Technet .iso) starts from the BIOS. I suppose a Dell DVD could be used on a HP and vice versa, but I don't have a system with Windows 8 to run some tests on.

  P.S. Can you please not directly to the pdf file because I'm updating regularly the complete pdf - it will probably be an old revision when I update in a few days:

  http://philipyip.WordPress.com/Dell-community-forums/

• After a clean install of windows 7 Home premium 64-bit, dvd will play not [scrambled] and computer is crashes sometimes and I have to force the reboot.

  I have windows 7 Home premium 64-bit, which has totally collapsed.  By mistake, I installed my operating system 32-bit vista on it.  I bought a new windows 7 Home premium operating system and installed.  I did a clean install after formatting the hard drive [the did twice].  Now dvd will play not [scrambled] and computer is crashes sometimes and I have to force the reboot.  I saw the reference to System 32 on restart options.  Help?

  Original title: operating system 32 and 64 bit

  Have you installed Windows 7 device drivers for your make and model. If this is not the case, then go to the support web site factory and download Windows 7 drivers to a folder on your PC and then first install the drivers for the card mother/chipset, followed by USB, SATA, LAN, Audio and all other pilots.

  Find the website of your computer manufacturer support.
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  How do you know if you have a 32 bit or bit 6 vrsion of Windows installed:

  http://support.Microsoft.com/kb/827218

  BIOS updates: you should check to see if there was one, or sometimes several updates BIOS for the motherboard. Read (if provided) which solves the update. Sometimes a newer BIOS update will fix the problem. Read the instructions on how to your BIOS update/flash very carefully and be more you understand the process. There is a risk of a bad flash/update occurs which can make your system unbootable.

  Also check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com

• Im trying your doing a clean install of windows 7 and it says cd/dvd rom drivers are missing

  Installation does not go as expected, ive installed 100's of times and now im getting cddvd rom drivers are missing and help guys

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Fix for CD/DVD drive missing:

  http://support.Microsoft.com/kb/982116

  Go into the BIOS to start the computer and change the setting from IDE to AHCI. This allows Windows 7 to recognize the SATA CD or DVD ROM drive you dΘmarrez since and it should install.

  This probably won't work if your CD/DVD-ROM is not a SATA drive.

• BlackBerry Smartphones running Windows 7 and have Curve 8530 Desktop Manager does not reconginze usb connection

  Help!

  I have the Verizon Wireless 8530, I am running Windows 7.  When I opened the Desktop Manager and connect my phone to the computer shows it but not responsible office.  I uninstalled the Office Manager and reinstalled, I also rebooted the computer still nothing.

  I plug my husbands pearls in and it connects fine.

  Can someone help me please?

  I did remove and reinstall everything and I tried Office Manager just to see if there was a problem there. It still does not work.

  I have just started and went into my computer and click on the device and went out and the drivers updated again and this time it worked.  I hope it stays like that now.

  Thank you

• Windows 7 and distance left/right mouse click does not not with all programs

  I have Windows 7 and played a game called Minecraft through Internet Explorer and right click and left click on my wireless remote control does not work properly.  It seems to be isolated in this specific PC gaming.  I have other computers with Windows 7 that do not have this problem.  I tried to use a wired mouse and had the same problem.  I'd appreciate any help.  Thank you

  Hello

  If the issue is only with games, then I suggest you to check the mouse settings in the game.

  Some games allow changes in the settings of the keyboard and the mouse.

  I hope this helps.

• Facebook, Gmail and MétéoMédia works does not for me with the last update, even in safe mode

  That pretty much sums up it. Since yesterday, with the most recent update, firefox does not display correctly these sites. Someone else posted a question similar to this topic. It has been marked as resolved, but there is no solution posted. Here's his question: https://support.mozilla.org/en-US/questions/963125 I have the same problem as him with fb. In addition to the problem with fb, Gmail doesn't end loading. And MétéoMédia do not display the weather forecast. I'm sure that many other sites are affected as well.

  All sites work properly in Seamonkey, which I use once again, now. I went to oldapps download v. 22 of ff, but whatever the most recent update changed only came when I installed v.22. The problem persists. I could uninstall it completely and then new installation v.22, I guess, but I'm afraid that my browsing history, sessions, passwords, etc., would be affected, and I don't want to find all the files and support first. It's a hassle. Since the sites work in Seamonkey, I'm guessing that's not the fact that I have updated flash at the same time. I don't know how much these sites use flash, either. But if it's a problem of flash, I tell myself I should have the same problem in Seamonkey, and I did not.

  I wish that you guys would have an easy option to restore your updates because it's pretty darn annoying when they cause problems. Usually, they are not lethal problems, however, and the browser still works. Now ff does not work for some sites I use most often.

  Hello

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  __________________________________________________________________

  Also, some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  This will remove not essential info unless you check the box "delete all my personal data too.
  

  Please report back to see if this helped you!

  Thank you.

• Back to Firefox button doesn't work does not correctly when you navigate to the new Site

  When I open a page to a new site that I can navigate forward and backward on this site very much, but whenever I try to leave this site via the back button it shows as if there are no pages beyond this site, like the opening of fresh on this site page. This is driving me crazy so if someone could help this type of person not techno I would be eternally grateful.

  Yes, how the code page tab, you cannot return to the new tab Firefox's built-in page or a page that you want to substitute for it.

  Since this is your home page, you can use the usual methods to return to your home page:

  • Click on the home button in the toolbar
  • Press Alt + home keyboard

  Or you could try a different extension for the new tab page see if that solves it. For example:

  https://addons.Mozilla.org/firefox/addon/custom-new-tab/

  After installing, you must use the Options page to set the new desired tab page (instead of use subject: config).

  Open the page modules using either:

  • CTRL + SHIFT + a (Mac: Cmd + shift + a)
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then on the right side, find Custom new tab and click on the Options button.

  It is easy to enter your favourite homepage address. If you check either of the boxes, the expansion will set the focus in the page as well, for example, the cursor will be in the Google search box. (See attached screenshot).

  I had to leave Firefox and start it up again before new custom tab started working, but this may have been due to tests so many extensions back to back.

  Any improvement?

• Windows Vista Home Basic - problem with the icons does not meet various Windows services after trying to download updates

  I use Windows Vista Home Basic on a Dell Inspiron 1501.  I have recently accepted that some guest downloads Windows with terrible results.  First downloads do not appear to have been accepted and the system of guard stop and startup trying to cancel.  Second as I result, I seem to have lost access to a range of Windows tools.  For example in Panel I can't open system icons or Windows Update.  Nor can I access these services from any other avenue on the computer.  Whenever I have find an icon or a file screen flashes a dialog briefly and then disappears.  The effect of this is that I'm completely unable to access or to implement the recommended tools or services that could solve this problem.  My ability to manage my computer has been reduced to zero.  Dell were not receptive and I can't get a response from Microsoft

  worm post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  One thing you can try try the system restore, safe mode.

  Start the computer in safe mode with networking capabilities (hold DOWN F8 while the computer starts).

  To start your computer in safe mode, you can check the link below:http://windowshelp.microsoft.com/Windows/en-US/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx>

• Show/hide an element with the click of a button - Script works does not in Firefox

  Hi all
  
  Basically, I'm looking for show/hide a DIV with the click of a button.
  
  The script works in IE but fail in FF.
  
  I am sure that I am the problem here.

  <script type="text/javascript">
  
  function toggle(box) {
       var el = document.getElementById('box');
       el.style.display = (el.style.display != 'none' ? 'none' : '' );
       
       
       value = document.getElementById('content').value;
       if(value=="Show Calendar"){
       document.getElementById('content').value="Hide Calendar";
       }
       else{
       document.getElementById('content').value="Show Calendar";     
  }
  }
  </script>
  
  
  <style type="text/css">
  #box{
       background-color: #C0C0C0;
       height: 100px;
       width: 100px;
  }
  </style>
  </head>
  
  <body>
  
  <div id="box">
  </div>
  
  <input id="content" value="Hide Calendar" type="button" onclick="toggle(box)" />
  </body>
  </html>

  WE

  He also worked if you had changed-

  
  on this subject.
  
  		   

• After clean install of Windows 7, Netflix and Internet TV plugin does not work on Windows Media Center.

  Original title: problem with Windows 7 Media center

  Is there anyway that I can replace the whole C:\Windows\ehome? There is a permissions issue, and I can't find a way to change the permissions...

  The only reason I want to do is I did a clean install of windows 7 and the plugin TV Pluzz.fr and the internet do not work on this computer and it seems to be no work around. But I have a PC where WMC works fine and I can replace the entire record of WMC and it should work like the other PC (I think).

  I could do if I ran linux or something, but I'm looking for something simple or a fix to this problem with WMC.

  Hello

  Thanks for the reply.

  It is too bad to know the steps in my previous post did not help to solve the problem.

  I would like to inform you that starting from September 20, 2012, the experience of Internet TV is no longer available. You can consult the following Microsoft article that has the same information:

  Cannot open Internet TV in Windows Media Center

  http://support.Microsoft.com/kb/2801382/en-us

  For problems with Netflix, I suggest you follow the steps in the Microsoft article and check following:

  http://support.Microsoft.com/kb/972496/en-us

  Also applies to Windows 7.

  Please answer us on the State of the question to help you further.