Cleaning LTO5 TL4000 tape

Similar Questions

• Dell TL4000 Tape Library on Cisco UCS 6120

  Hello

  We have Cisco UCS 5108 2 6120XP fabric of interconnection. We are running VMware on my Cisco blades. I have I need to connect my Dell TL 4000 LTO3 tape library this Cisco UCS so that I can configure a virtual machine with the EMC Networker software for backup of virtual machine data. When I connect the Cisco UCS library, it does not recoginize as tape drive.

  Please suggest how to set up the same.

  Thank you

  Amit,

  We do not support direct damage attach FC tape library to the FI currently.

  It may be a CF or CF storage end switch.

  . / Afonso

• content managed rman backup crushing and selection procedure of the tape media

  Hello Experts.

  I have a question about the backupset rman tape media manage tape of the osb.

  [ENV]

  Exadata rman backup assistance OSB(version: 10.4.0.3.0) SL500 LTO5 4 Tape Drive with rman scripts and full backup is working well.

  1 Appendix backup on OS crontab

  -Each backup full day at 00:00 AM

  2 rman view all:

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  using the control file of the target instead of recovery catalog database

  RMAN settings for database with db_unique_name TESTDW are:

  CONFIGURE RETENTION POLICY TO 3 DAY RECOVERY WINDOW;

  CONFIGURE BACKUP OPTIMIZATION # by default

  CONFIGURE THE TYPE OF DEFAULT DEVICE TO 'SBT_TAPE ';

  SET UP THE DEVICE TYPE 'SBT_TAPE' PARALLELISM 4 TYPE OF BACKUP BACKUPSET.

  CONFIGURE CONTROLFILE AUTOBACKUP ON;

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  3 rman backup scirpts

  Run {}

  allocate channels c01 type 'sbt_tape' connect 'sys/manager@testdw1';

  allocate channel c02 type 'sbt_tape' connect 'sys/manager@testdw2';

  allocate channel c03 type 'sbt_tape' connect 'sys/manager@testdw1';

  allocate channels c04 type 'sbt_tape' connect 'sys/manager@testdw2';

  Backup section size 900g database;

  output channel c01;

  output channel c02;

  output channel c03;

  output channel c04;

  }

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  1st quarter > after several weeks and I run the command as "#obtool u admin Pei welcome1 lsvol-L lib1.

  and are used in many media of rman backup band (about 50EA media, perhaps 46EA are full and 4EA are appendble)

  So, I issue the command 'lsvol - a - c' and could not display expired on all media content.

  Why OSB no has not select and replace the tape media despite the rman rman default retention policy (3days) all show the setting.

  Why OSB does not have the expired status of rman content on tape media?

  -> I need the rman (delete expired, delete obsolete etc...) command to share the summary status of OSB and rman rman?

  Q2 > selection procedure for the tape media all backup rman

  Suppose the total number of tape media is 5EA. (1,2,3,4,5) with an available tape LTO5 drive.

  Status: 1 (full-rman content already expired), 2 (content integral-rman not expired), 3 (editable, remaining space), 4 (new media), 5 (currnet wring media)

  If OSB burn now 5 and reach at the end of the Strip and possibly another media, media to be selected by the OSB?

  Advanced thanks.

  If I place the order obsolete in the rman script as 'delete type 'SBT_TAPE' noprompt obsolete device;' the results will be the same as your

  the syntax because rman default setting (CONFIGURE RETENTION POLICY to RECOVERY WINDOW OF 3 DAYS ;) has already been fixed on the command "Show all", right? @)

  Yes.

  I use the catalog of recovery on a different database and backup script has catalog db connection string.

  And if I only use controlfile instead of recovery catalog to save the backup information and put in place "control_file_record_keep_time" a default of 7 days to 365 days, "remove obsolete" command to remove several weeks backupset works well, is it not?

  Possible problem are existing backups for several weeks if you left default control_file_record_keep_time. Change now will not help unless you catalog later manually all the old pieces not catalogued on tape backup.

  After you clean up the situation and particularly to remove obsolete in your script, rman, you will never make problems with control_file_record_keep_time from this moment. By default will do just fine because it is larger than your window of recovery.

  Kind regards

  Mitja

• The card SAS 5/e HBA - drivers

  We recently bought a backup unit TL4000 tape as well as 2 SAS 5/e PCI cards. I need to find drivers for the SAS cards, but cannot find them anywhere on the web site of Dell. the cards are mixed to a server PowerEdge 2850 running Windows 2003 SP1, 32-bit operating system.

  can someone tell me where to find the drivers to a SAS 5/e HBA, PCI Express card? Thank you.

  
  

• TL4000 Auto cleaning

  How many hours of use before the drive requires cleaning?  We have about 1000 hours on one of the disks and the cleaning cassette (which is inserted into the slot of cleaning and automatic cleaning is enabled) is not yet capable of being loaded.

  
  

• How to clean tapes on an Epson

  How to clean strips (light lines) on an Epson computer

  Using Epson maintenance tools to clean the inkjet ink and other diagnoses.

  NB these tools will be available if you have installed the full software features Epson

• tape drive sharing between ndmphost and admin server usnig osb.

  Hello.
  It is available to share the tape drive between san usnig adminserver and ndmphost the switch?
  We have 6 lto5 disks and will be attached to the machine oracle ss7420 NDMP.
  The customer site has no backup of the customer unless the nas data.
  
  Reason why I'm asking as OSB catalogdb to tape drive backup.
  Is it safe to admin osb catalogdb backup as client or tape drive sharing is available?
  
  Another issue is that when we set up unit NDMP, NDMP host can control robot or robot control should assign to the server administrator or the two availble?
  
  Thank you.

  Yes it's available by design. You have to configure the NAS with the role of mediaserver and add a 2nd point of attachment to the device. You can then create calendars that limit to those fixing points. Allows you to share all the drives between all media servers.

  For the robot, I let the server admin to do that, just tape devices were mapped to the time. Controlling Robotics is a light enough task.

  Here is an example of one of my setups where the drive is shared between several media servers, Oracle Linux 4, Linux 5 Oracle and NetApp

  L700-1-lect1:
  Device type: Ribbon
  Model: ULTRIUM-TD2
  Serial number: 7MHHY00202
  In service: Yes
  Library: L700-1
  DTE: 2
  Automount: Yes
  Error rate: 8
  Frequency of application: [unknown]
  Debug mode: no
  Blocking factor: 512
  Blocking max factor: 512
  The current band: 999
  Use the list: all the
  In-car use: 7 months, 3 weeks
  Cleaning required: no
  UUID: 558a34da-045e-102c-8443-002264f35328
  Annex 1:
  Host: dadbdn01
  Raw device: / dev/tape/by-id/scsi-1IBM_ULTRIUM-TD2_7MHHY00202
  Appendix 2:
  Host: dadbdh01
  Raw device: / dev/tape/by-id/scsi-1IBM___ULTRIUM-TD2___7MHHY00202__
  Annex 3:
  Host: dadbeh01
  Raw device: / dev/tape/by-id/scsi-1IBM___ULTRIUM-TD2___7MHHY00202__
  Appendix 4:
  Host: ap1030nap
  Raw device: nrst1a
  Annex 5:
  Host: dadbak01
  Raw device: / dev/tape/by-id/scsi-1IBM___ULTRIUM-TD2___7MHHY00202__

  Thank you

  Rich

• The best way to clean a woven nylon for Apple Watch band

  Anyone knows a good way to clean a strip of nylon woven for the Apple Watch!

  Joe

  Hello

  Apple cleaning and drying of your woven Nylon band steps are recommended:

  • Remove the clip of your watch;
  • Wipe the Strip with an abrasive, lint cloth;
  • If necessary, the linen can be slightly moistened soft water;
  • Allow the tape to air dry.
    • Direct light from the Sun, high temperatures and moisture conditions can cause damage.

  More information:

  Cleaning and port Apple Watch - Apple Support

• How to clean a bracelet woven nylon?

  What is the best way to clean a bracelet woven nylon?

  Hello

  Apple cleaning and drying of your woven Nylon band steps are recommended:

  • Remove the clip of your watch;
  • Wipe the Strip with an abrasive, lint cloth;
  • If necessary, the linen can be slightly moistened soft water;
  • Allow the tape to air dry.
    • Direct light from the Sun, high temperatures and moisture conditions can cause damage.

  More information:

  Cleaning and port Apple Watch - Apple Support

• Apple Watch band of nylon web cleaning

  I have a show almost nine, but this group seems already worn and dirty.  wash with a 'fluffy' and some water helped, but it's still fresh looking.  Any thoughts? Thank you!

  Hello

  Apple cleaning and drying of your woven Nylon band steps are recommended:

  • Remove the clip of your watch;
  • Wipe the Strip with an abrasive, lint cloth;
  • If necessary, the linen can be slightly moistened soft water;
  • Allow the tape to air dry.
    • Direct light from the Sun, high temperatures and moisture conditions can cause damage.

  More information:

  Cleaning and port Apple Watch - Apple Support

• How you turn off pairing a show from a cleaned iphone?

  I iPhone I had to clean it thoroughly because of software problems, yesterday... The watch I have is always locked the old device and now my new watch application cannot match as the watch display locked my out (I thought that my entering the wrong code 10 times he wouldn't set, but alas) what can I do to get these 2 again paired devices? The comments are well appreciated

  Hello

  Follow these steps to clear your locked watch and pair it with your iPhone:

  • Connect your watch to its charging cable with power connected.
  • Hold down the side button until you see the cursor off the power.
  • Press Power Off (don't try to drag - just press more firmly than a normal tap), then press erase content and settings.
  • Associate your watch by using the app on your iPhone, choosing backup restore if offered the choice.

  More information:

  If you have forgotten the password for your Apple Watch - Apple Support

• iPad - I forgot to turn off my screen before cleaning, and now the police is so great that I can't narrow it down to access the screen.

  iPad - I forgot to turn off my screen before cleaning, and now the police is so great that I can't narrow it down to access the screen.

  James,

  Double-tap the screen with three fingers and then go to settings > general > accessibility >... put the Zoom wide.

  

• My Apple Watch will not charge on the charger.  I cleaned the back of the watch and the charger.  Any ideas?

  My Apple Watch will not charge on the charger.  I tried to clean the back of the watch and the charger more used several points of sale, but in vain.  Any ideas?

  Hello

  When you reload your watch, check that:

  • All the plastic film was removed from both ends and both sides of the cable support (consult closely on the head of the charger).

  

  • On the back of your watch and the head of the charge cable are clean and dry (clean with an abrasive, lint cloth).
  • The head of the load is properly aligned with the back of the watch, with the concave side / curve touch fully:
    • Some docks of watch, brackets, cases or protectors might hinder it.
  • You use a real Apple magnetic Charging Cable or a certified Apple module magnetic charge.
  • If you reload your watch by plugging into a power outlet:
    • Check that the magnetic charge cable Apple USB connector is fully engaged in the USB power adapter.
    • Try to use different maps of the following:
      • The real Apple USB Power Adapter that came with the watch, or;
      • A true 5W Apple (iPhone) or 12W (iPad) USB power adapter, or;
      • A third-party certified 5W (MFi) Apple USB power adapter.
    • Try to charge via a USB port (see following).
  • If loading via a USB port on a computer, make sure that you use a USB 2.0 or 3.0 port, the computer remains turned on and awake, and the cable is plugged directly into the computer (not on, for example, an external keyboard).
  • If your battery is very low, you may need to wait a few minutes for the green lightning appear (confirming that the charge has started).

  Once the load has started, you can tap on the screen at any time to check the progress (leave a few minutes at the beginning, where the watch is in charge of a very low battery level). A green lightning bolt symbol indicates that your watch is being loaded. It is normal the screen back to sleep while continuous load.

  More information:

  Check your battery and load your Apple Watch - Apple Support

• the cleaning Strip

  I currently have a fitbit and it is impossible to remove the newsprint and the other the band including Clorox marings (as you can tell, I'm desperate); However, I don't want a black band. What bands pick up less and those dirt that stains easily clean without aggressive products.

  Hello

  Apple did not recommend using cleaning products when cleaning the Apple Watch bands.

  The recommended steps are:

  • For strips of leather and nylon fabrics:
    • Wipe the Strip with a non abrasive and non fluffy cloth.
    • If necessary, the linen can be slightly moistened freshwater (leather bands don't are not water resistant, not must therefore not soaked).
    • Let the Strip to dry air, while avoiding exposure direct sunlight, high temperatures or humid conditions, which can cause damage.
  • For all other bands, loops and parts attachments:
    • Wipe the Strip with a non-abrasive and lint - cloth which can be moistened with water if necessary.
    • Dry the tape with another non-abrasive and non-fluffy cloth.

  More information:

  Cleaning and port Apple Watch - Apple Support

• DV7-3135: Synaptics Touchpad two fingers scrolling, scroll one finger and double tap does not work

  Clean the OS installed, Synaptics driver installed via Windows Update.

  V19.0.12.95 Synaptics pointing device

  also will not save settings after restart.

  UPD: I discovered that my touchpad doesn't support 2 + finger touch.

  I installed an old driver synaptics. now a finger scrolling works very well. but you know... No tap/rightclick 2 fingers... I didn't know this touchpad so badly.

  What happens if you use old driver for Win 7? Not sure what exact model you have: http://support.hp.com/ee-en/drivers/selfservice/identify?q=dv7-3135&tool=s-002#Z7_3054ICK0K8UDA0AQC11TA930O2

  Of course, you must also disable automatic driver update.