Cleaning of storage premises

Similar Questions

• How to clean the storage in the "others"?

  Intel hard drive indicated that I have 100 g under 'other', but unidentified.

  I want to clean it 'other', so free up more hard drive space.

  How to do this?

  Another is simply the remains not included in specific lists and includes things like cache files that you don't want to mess with. With a few exceptions, most people who are short of space have too many media files on their computers. First of all, I suggest that you perform a secure - start your computer and hold down the SHIFT key until you see the Apple icon. This restart will take more time than usual because the utility disk program checks the disk and cache files are cut off. Once the computer reaches the Finder, restart normally. This peut release a significant amount of space. If she is not your best bet is to look at the multimedia files.

  See this article from knowledge base of Apple on others: OS X: what is 'other' space about this Mac?-Apple Support

• How can I free up space on iCloud?

  Hello I have a MacBook Pro (retina, 13 inches, end 2013) OS X El Capitan 10.11.6 (G 15, 31). I get emails that I'm reaching my maximum of storage available in iCloud. How can I free up space by cleaning the storage? It seems that everything I am allowed to do is remove al storage of each application and I want to choose what to delete. Thank you

  This article should help you: manage your iCloud - Apple Support storage space

• iPhoto has lost about 3000 pictures

  I need help!

  My iPhoto has lost about 3000 pictures in the web I read something about a corrupt library.

  If I scroll in my pictures, I can see them for a few seconds, and then they disappear! I can't find them in the masters (iPhoto 11) and the iPLM show me entered as missing.tiff of the document with no content.

  Can someone help me?

  Thank you for a booty!

  If I scroll in my pictures, I can see them for a few seconds, and then they disappear! I can't find them in the masters (iPhoto 11) and the iPLM show me entered as missing.tiff of the document with no content.

  What happened, until the photos have disappeared?

  Did you move your library to a different location or restore your iPhoto library? Have you run free cleaning of storage applications?

  Where is stored the iPhoto library?

  If missing photos are no longer in your folder of masters and IPLM missing reports TIFFs, the photos are actually missing.  Is there a 'Old masters' folder in your iPhoto library?

  Try to restore t the library since the last Time Machine backup, you did until the photos have disappeared.

• How to remove iPhone music & movies just

  How can I delete music and movies, I want more on my iPhone to iTunes without removing the same securities by other devices synchronized to the same computer and iTunes account?

  I used to be able to select several items I wanted is no longer on my phone, and then delete them, cleaning of storage space. This is no longer an option; I can't yet anything drag to the trash. Instead, I'm forced to deal with each file individually, and even on 'manual', it tells me that it will remove the same title at all. This me alarm, because I don't want to suddenly something I paid for delete or downloaded, remove anything my iPad or make an invisible to AppleTV movie, I have to let these files my device where it occupies a space precious.

  All of a sudden it's all become so confused.

  

  

  I agree. I know that apple and others will say that you can manually manage music and videos, but we all know he has moments iTunes decided to sync and clear on these tracks we want to keep on our devices. It has always been a bit of a hit and Miss with me. I suggest to press Delete song and just manually download again. Trail and error I ' afraid, whatever Apple attempts to address this problem, he always comes back to bite me! That being said, it must stay on your device after that have downloaded red.

• I find the new software of pictures (including the iCloud features) to be extremely confused

  My versions: OSX Yosemite 10.10.5, iPhone iOS 9.2, iCloud

  I find that things work very different depending on the device or the app used to access the photos.  In particular, many features, that I expect to have icloud Photos seem not to be available (or I can't find them in the GUI).

  Some examples of things that I can't do in iCloud Photos:

  (1) select a Photo Burst, choose the best shot, the rest trash (to clean the storage space)

  (2) select and album and share it

  (3) see shared albums

  (4) see 'Automatically created family Shared Album' who supposedly is created when the family of sharing is enabled.

  If I go the Photos instead of Photos of iCloud app, then all is very different.  I do not see the same pictures, the user interface is different, and a lot of things is confusing and not intuitive.  Shared photos seem to appear under the fake name of the Album.

  Note: On my phone, I have all of the "auto-download and share" features introduced on the market, because I prefer to keep some control on what photos are shared and also because I do not understand these features.  For example, what is the difference between 'My Photo Stream' and 'iCloud photo library?  And how these relate to how works "iCloud Photo Sharing"?

  Rob$ he wrote:

  What is the difference between 'My Photo Stream' and 'iCloud photo library?  And how these relate to how works "iCloud Photo Sharing"?

  Difference between iCloud photo library and stream photos- http://www.imore.com/icloud-photo-library-and-photo-stream-whats-difference.

  iCloud, photo - sharing Photo Sharing FAQ - Apple Support iCloud

  Find out more!

• Why what can I do about alerts (red triangles) on the photos in photo book?

  Alerts (red triangles) are appearing on many photos - they weren't there when I worked on it a couple of days.

  "Missing or invalid photo: the full version of the resolution of this photo cannot be located or is corrupt." Please remove from your choice. »

  I'm only using iPhoto.

  What happened before this problem occurred first?  What has changed since the last, it worked?

  You have moved your iPhoto library to another drive?  You have deleted all the photos from your computer to free storage?

  Have you run free cleaning of storage applications? Where your photo library is stored?

  You import your photo to Photos in the iPhoto Photos-controlled library, or you have disabled the preference of iPhoto ' advanced > importing > copy items to the iPhoto library "?

• Good way to delete a data store

  I'm not sure this is the right forumr for my question. If not, can someone please point me to the right one?

  I need to remove two LUNS on a storage (HP LeftHand).

  The lun host 2 warehouses of data used by a 5.5 vSphere cluster composed of 3 5.5 U2 ESXi servers.

  I have to perform the activity during execution of virtual machines and I can not create any problem or performance for VMS running problem.

  So I need to create a checklist as accurate and complete as possible...

  Here's my Checklist:

  • I removed all the VMS since data warehouses
  • I deleted all the files from data warehouses
  • I removed data warehouses from the list of data used by pulsation HA stores
  • I checked that the sacratchconfig. ConfiguredScratchLocation for each node indicates a different datadtore of those that I am giung to remove

  Can I safely remove the files inside the folder .vSphere-HA?
  Should what else you check before removing the data store?

  Is there anything else I should consider?

  Concerning

  Marius

  For well detach and remove datatores take a look at http://kb.vmware.com/kb/2004605.

  In fact, there is nothing which will cause problems. If you try to take it apart (or delete) a data store it will work either (if anything accesses the database), or you receive an error/warning message. Once a datatore is disassembled or deleted, you must detach the LUNS for each host, and - after unpresenting a LUN of Lefthand CMC and run a new analysis on the hosts - you can do the cleaning (esxcli storage core detached unit remove d NAA_ID) on the hosts.

  André

• How to re - thin disc?

  Hello

  I set up one of my virtual machines to provision thin on 8 months ago.  The size of the disk is about 100 GB, to the wire while he went to about 80 gigabytes of data.  But this weekend, I cleaned the storage server and introduced the use of the disc for only 15 GB (removed lots of log files).  In Vmware, it shows again the size of the disk is 80 GB, so the vmdk file is still 80 GB.  How can I re-thin disk so it really comes down to the space currently used?

  Thank you

  STRP OS does not clean the block when you delete a file.

  You can use sdelete (for Windows) to do this.

  André

• ESX 3.5 backup Suggestions / Help

  Hi all!  It's been a while since I've visited these forums but recently I tried to get a plan to back up our virtual environment.  First, here's a quick description of our virtual environment:

  3 Dell PowerEdge 2950 with 32 GB of RAM each, NIC 6 (2 on board, 2 dual port cards), each two-processor Xeon 5345

  1 Dell / Equallogic PS400E SAN

  ESX 3.5 UPD 1 Standard x 3, VC 2.5 Foundation (non-virtual)

  Here are our current backup environment / method:

  CA Arcserv 12 backup each VM (local disk + the system state) as a backup of 'level of files', something in the neighborhood of 2 TB - not a backup complete VM

  I've suggested that we do was buy VMware Agent for Arcserv of CA software and a basic backup unit (unit 3 TB ExaGrid) disk which should be installed and configured by our SAN provider.  The idea was to start to full backup of virtual machine alongside our backup process normal precautionary measure for the updates of the firmware of the SAN, semi DR, software ESX upgrades / updates, etc.  Essentially to give me peace of mind and a way out of what I consider to be a 'disaster' that is losing the San or a firmware update gone bad.  Due to the cost of the solution, the idea was struck down.  Now, I'm first trying to find an "cheaper" alternative for giving me some peace of mind.

  Some of the ideas I had would be to buy a NAS cheap with sufficient capacity to allow me to get a complete virtual machine backup before making any changes I need to do but I'm not sure what all I would need to be able to do something like that.  Would I need to the Arcserv for VMware agent or something like that (maybe EsXpress or vRanger Pro etc connection) or I could shoot with just VCB?  Would it be possible to not even use VCB and up volume on the SAN, and copy the files or do I need something like VCB to put the files in the correct state?  Any thoughts would be appreciated, thanks!

  When VCB puts these offline files is the virtual machine offline, the duration of the backup?

  N ° snapshot functionality has been designed so that you don't have to take the virtual machine offline.

  With Arcserv (or VCB) to put the files somewhere I think it would be unwise to put them back on the SAN then maybe local storage (DAS) or storage (NAS) networking maybe?

  Thaat's what we do as well.  We are valuable SAN performance real estate for the archives, which would be a waste, so we use the SATA storage premises.

  Or are you saying that acrserv should be able to recover the files from the SAN to bring broadband (or other)?

  Probably better to stage, the first save, perhaps of local disk, a NAS or Windows file store.  Use your backup software to process these files as you would for a physical server, and then move those band.  You can probably go live on tape, but if the backup fails, you are wasting time / Ribbon, featuring it it will be easier to manage also.

• clean reinstall with fast storage intel ROM

  After a series of hickups, I recently found with a need to reinstall Win 7 on a Dell Inpiron 7250, which came with an SSD and a 1 TB hard drive. Hardware diagnostic shows no errors. The problem is that when I try to reinstall the OS OEM DVD of the Bios menu is set to Intel Rapid Storage, but installation is not possible. It seems there is no disk to install to. With the BIOS value AHC installation works, but I end up losing the SSD and Intel RST feature. Having quickly skimmed manual Intel, it seems that what Miss me is: option technology Rapid Storage Technology ROM. How can I reinstall the which?

  I need a set of foolproof step-by-step instructions that starts from a totally clean system. Can't help but wonder why the OEM DVD system is not able to put the system in place from scratch.

  1. Windows installation media, and the UEFI BIOS settings?

  Did you get a USB key of resettlement set to be installed in the UEFI with GPT partition scheme in FAT32? You have active UEFI, disabled SecureBoot and USB Debug active (USB 3.0 off):

  http://dellwindowsreinstallationguide.com/converting-your-Dell-Windows-reinstallation-DVD-into-a-reinstallation-USB/

  http://dellwindowsreinstallationguide.com/ensure-you-have-the-correct-SATA-configuration-in-the-BIOS-Setup-for-your-configuration/
  

  2 SSD Windows Boot/HDD data - recommended Configuration
  

  There are a few problems with SSD cache drives and SSD prices fell his best in most cases it is sufficient to replace the mSATA SSD with greater capacity (> 256 GB).

  This generally perform much better and much more reliable than a SSD cache drive.

  Ensure the exploitation of the SATA AHCI and use DiskPart to wipe the HARD drive SSD:

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows/a-clean-install-of-Windows-8-1/useofdiskpart/

  Clean install of Windows on the SSD and then redirect libraries:

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows/a-clean-install-of-Windows-8-1/solid-state-drive-and-hard-drive-configuration/

  3 SSD Cache drive Windows - Configuration public

  You mentioned the model as an Inspiron 7250 number, there is no Inspiron 7250, there is an E7250 of Latitude and PowerEdge E7250.

  Please confirm the model and what SATA driver, you tried to load.

  Ensure that the SATA Intel RS operation.

• How to compare premises, iSCSI and storage NFS for VMware ESXi 5 with IO Analyzer?

  Hello

  I have 2 hosts ESXi 5.0 with a few virtual machines running. I would compare the IO throughput for my local storage, iSCSI and NFS vmware storage store. Can someone point me to the right direction? I read the documents and tutorials, but I'm not sure how to compare tests from these 3 options.

  I have a need to compare the following storage options.

  Local disk on the ESX host

  iSCSI on QNAP NAS device

  iSCSI on EMC e 3100

  NFS on QNAP NAS device

  NFS on EMC e 3100

  IOmeter seems to be good tool based on reading, but still not clear where to make changes to pass tests of storage to another.

  Thanks in advance,

  Sam

  If you use IO monitor, then you must simply vmotion the VMS to the data store for the device you want to test, and then run the test (and Records results).  Can vmotion for the following data store and repeat.

• Upgrade test lab to U4 - lost access to the premises of SATA storage

  Wonder if anyone has seen this when upgrading ESX of U3 to U4.  My laboratory ESX servers are based on the motherboards desktop, the ASUS P5E-VMDO (processors quad core, 8 GB RAM).  All the way up to and including the 3 update, installing ESX recognized the SATA controllers on board and I was able to use the local VMFS partitions.  In fact, this is where I had installed my Lefthand Networks VSA SRM test and demo-ing.  The upgrade to U4 has apparently updated drivers SATA for ESX and server does not see the SATA controllers on board.  The laboratory is still quite functional due to the Openfiler SAN I, but I can choose to downgrade to U3 ESX hosts, unless I can find a solution, so I can always access the local storage.

  Anyone got tips?

  Assuming that you do not use a RAID function on board with your SATA, see if your system BIOS has an option to portray the ICH9 controller as something else - achi if it is avaiable or portray SATA in IDE, if it's available and see if ESX 3.5 Update 4 it resumes after a reboot. You'll want to write to its original position first before making changes if you can put if none of this works.

  Datto

• After changing to DB for storage Var Client registry cleaning

  Hiya,

  After a server crash major caused by the corruption of the registry, I recently changed all applications to use a MySQL database for storing Client variables.

  However, there seems to be a lot of entries still in the registry (not of originalities like us on average 10,000 per day in the comic book) and I was wondering what was the best way to clean these items. Can I use a cleaning tool or do I remove them by hand?

  Thank you very much

  Rob

  You can remove the key to Clients without problems.

  Mack

• The limited size of the premises plan (size of primary and backup storage?)

  In a local plan, I put the following tags to limit the size of the JVM to 350 MB:
  < Unit Calculator > BINARY < / Unit-Calculator >
  < high-units > 367001600 < / high units >
  
  Means the primary storage AND backup storage is limited to 350 MB? It makes sense that they would have the same size, ensuring only that's how it works.
  
  Thank you!

  The settings will eventually be applied to the backup. You can view the following for the dimensioning of the news:

  http://wiki.tangosol.com/display/COH35UG/JVM+Sizing+Guide

  http://wiki.tangosol.com/display/COH35UG/production+checklist

  See you soon,.

  Jay