Cleaning under Windows 7 cartridges

Similar Questions

• I bought a used under Windows XP SP2 desktop computer. I need to upgrade to SP3 to run MS Office Home and Student 2010. I was not able to be upgraded. Help!

  I bought a used under Windows XP SP2 desktop computer.  I need to upgrade to SP3 to run MS Office Home and Student 2010.  I was not able to be upgraded.  Help!

  If I where to install SP3 I would choose to download the
  file and don't use automatic updates.

  Where to download the SP3 Setup file:
  (The file is large but only installs the components required by your PC)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b33b5a8-5e76-401F-BE08-1e1555d4f3d4&displaylang=en
  OR http://www.microsoft.com/en-us/download/details.aspx?id=24

  How to obtain the latest Windows XP (support CD or download) service pack
  http://support.Microsoft.com/kb/322389

  Your computer must be at least level SP1 or SP2 SP3 will not be
  install on XP Gold.

  I would also create a "save image" of my front disc
  to install SP3 just in case you have problems.
  Not having any Image backup software:
  Try the 'True Image' (has a 15 day trial version available)
  http://www.Acronis.com/homecomputing/products/TrueImage/

  If you use a third-party firewall brand, of course, it is up to date (latest version)

  Install SP3 in mode "clean boot":
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Overview of Windows XP Service Pack 3
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=68c48dad-BC34-40be-8d85-6bb4f56f5110&displaylang=en
  Don't forget to download and read the file titled "overview of Windows XP Service Pack 3"
  Note: "you can run the package of SP3 update on any edition of Windows XP SP1 or SP2."

  The space of hard disk required for Windows XP Service Pack 3
  Describes the space of hard drive required for installation
  Windows XP Service Pack 3 (SP3)
  "For a PC on which Windows XP is already installed"
  http://support.Microsoft.com/kb/947311/en-us

  Install Windows XP Service Pack 3 (SP3)
  http://TechNet.Microsoft.com/en-us/Windows/cc164204.aspx

  Release notes for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/936929/en-us

  List of fixes included in Windows XP Service Pack 3
  http://support.Microsoft.com/kb/946480/
   
  Steps to take before you install Windows XP Service Pack 3
  Recommend the steps to take before you install Windows XP Service Pack 3.
  Also includes troubleshooting information.
  http://support.Microsoft.com/kb/950717/en-us

  J W Stuart: http://www.pagestart.com

• How I clean under my Sony Vaio laptop mouse buttons?

  How I clean under my Sony Vaio laptop mouse buttons? Any ideas?

  Thank you.

  How I clean under my Sony Vaio laptop mouse buttons? Any ideas?

  Thank you.

  Hello

  Nwill you need to go to the Sony Web site and download the manual for this computer. Here is a link for your convenience.

  Sony eSupport

  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• How to remove the printer driver under windows Vista software

  How to remove the printer driver under windows Vista

  Hello

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  --------------

  If you have an error spooler or service use these methods to make them disappear including having to re - install
  the same printer if you intend to remove it.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Can't free up space on my drive C: under Windows 7

  Original title: failure of hard disk space

  I can't free up space on my drive C: under Windows 7.  I have a 400 GB HDD and only 6 GB is free.  I know that I have not used that much space.  Disk clean up does not help.  I deleted all the files (photos, videos, etc.) I can think of.  Help, please!

  Hello

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  How to remove and delete the folder Windows.old on Vista or Windows 7
  http://www.kodyaz.com/articles/delete-Windows-old-removal.aspx

  =============================================

  If that does not free enough space then you must move data to others
  Media (such as other hard disks/partitions, CDs, DVDs or USB drives) and/or
  uninstall programs that you do not use.

  ------------------------

  It will show you how disk space is being used.

  WinDirStat - free - use to make sure you know what is too much space.
  http://WinDirStat.info/

  -Free - TreeSize tells you where precious space has gone to
  http://www.Jam-software.com/treesize_free/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/

  ===================================================

  Malicious software could play a role:

  If you need search malware here's my recommendations - they will allow you to do a thorough check and removal without ending up with a load of spyware programs running resident who can cause as many questions as the malware and may be more difficult to detect the cause.

  No one program cannot be used to detect and remove any malware. Added that often easy to detect malicious software is often accompanied by a much harder to detect and remove the payload. So its best to be now too thorough than paying the high price later. Check with them to an extreme exaggeration, and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run the in the Windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN it will show infections in the report after you run - if it will not run change tdsskiller.exe to tdsskiller.com name. If she finds something or not does not mean not, communicate with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and use scanners online and other methods.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  AdwCleaner
  http://www.bleepingcomputer.com/download/adwcleaner/
  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses, Trojans, rootkits, etc.) that have infected your computer despite all security measures you have taken (such as the anti-virus software, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Scan online ESET
  http://www.eset.com/onlinescan/

  Scan Kaspersky online
  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:
  

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)
  MALWARE IS STILL PRESENT).

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  =======================================

  For extreme cases:

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• PSC 2115 all-in-one has stopped printing under Windows 7 64-bit.

  Faced with the driver for PSC2115 which stopped working under Windows 7 64-bit. Problem is that this printer is old, but still in excellent condition and prints of cracking.

  Used the HP trobleshooters to exhaustion. It shows that the printer is ready, but prints just stuck in the print queue and outputs nothing.

  The message of the alignment of the cartridge is also high at all times, but it do not line up when you press on enter.

  Hi G-Force,

  Here is a link to an excellent tool that can help narrow down and solve your problem:

  HP Print and Scan Doctor

• Speed dial does not work with Firefox 5 under Windows 7; How can I down Firefox 4.1?

  Speed dial Extension does not work for Firefox 5 under Windows 7.

  How can I downgrade to Firefox 4.1 so that I can use this indispensable Extension?

  This link will be fix Fast Dial for Firefox 8.0.1

  http://DL-Web.dropbox.com/u/12466346/speedfox.org/addons/fast_dial-3.5b1fixed2-FX.xpi

• Clean install Windows 7 with UEFI in dv6-7215nr

  Hi, I would like to do a clean install of my HP dv6-7215nr Windows 7 Enterprise SP1 x 64 envy laptop.

  To this end, I have 3 questions to solve some installation issues.

  1. What are the steps to clean install Windows 7 SP1 Enterprise intact in UEFI mode?

  I tried to install Win 7 after the pre-requisites following:

  (a) not partitioned 200 GB free space on the disk (only 1 physical disk)

  (b) already installed Windows 8 files with UEFI

  (c) UEFI enabled

  (d) heritage disabled startup

  (e) secure boot disabled

  When I Boot in UEFI of CD/DVD, I can't switch to the Windows startup screen, it just hangs. What I am doing wrong? Is there any other prerequisites that I don't know?

  I tried to install UEFI with Legacy enabled Boot, and I installed win7 but I can't disable Legacy new Boot because Win7 boot and I want only the UEFI Boot and need for inheritance disabled.

  2. where can I download drivers for Windows 7 for my laptop?

  I found this topic:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/HP-envy-DV6-7210ei-downgrade-fr...

  They point to these drivers

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us & dlc = in & lc = in & product = 5273735 & task = &

  I think I could use these drivers, but I need just in case where. I guess they should work as the product names are roughly similar (with mine).

  3. is it possible to Secure Boot with Windows 7 SP1?

  I have no research on this so far.

  Thanks for the help that someone in the community can give to me, it is not important all the problems that I have set in I can still do research on questions 2 and 3 and help others with my research if I can do it before a response. Any info you can give me will be too great.

  Carlos

  (1) ' secure Boot' must be DISABLED and 'Legacy Support' must be ENABLED to install Windows 7 and many other older operating systems. The bootable media must support UEFI boot to install on a GPT-partitioned drive.

  You let people with DISABILITIES 'Secure Boot' (and 'Legacy Support' ENABLED) once you have installed Windows 7. Changing these options causes Windows 7 to start is no longer.

  (2) the Windows 7 drivers on the CTO Entertainment Notebook PC drivers HP Pavilion dv7t-7000 page you referenced, will work on your computer.

  (3) it is not possible to install or use Windows 7 with "Secure Boot" ACTIVE.

  WARNING *.

  HP does not recommend installing Windows 7 on a consumer computer comes with Windows 8, and it will support the installation of Windows 7. HP cannot provide the drivers for Windows 7 and the appropriate drivers are not available for the hardware in the computer. In addition, Windows 7 can not take in charge some of the hardware or software designed for the computer.

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  You will need to DISABLE 'Secure Boot' and ENABLE 'Legacy Support' in the 'Configuration of the BIOS start-up secured' on the page parameters below, until you try to install Windows 7.

  

  In addition, as the hard drive is probably partitioned as TPG, you must start the computer by using the "UEFI - CD/DVD drive" or "UEFI - USB Flash drive" options in the boot menu "F9". If "UEFI - CD/DVD drive", "UEFI - USB Flash drive" or something to that effect does not exist in the start menu, please post a screenshot and/or make startup listed options.

  I suggest using Windows 7 SP1 for the best installation experience. If you need Windows SP1, see 'How to install Windows 7 without the disc' to download and create your own disc of Windows 7 SP1. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash drive. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.

  If you have missing or unknown devices after installing the drivers, please post to the "Hardware ID" Device Manager (just the text string will do) to these devices as shown in the example below.

  

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• What printer for Satellite Pro 420CDT under Windows 95?

  What printer is best compatible with a satellite Pro 420CDT work under windows 95?

  Post edited by: LizP

  Hello

  It's an odd question since this machine with this operating system is REALLY REALLY REALLY old. If you do not want to use a printer of opportunity then I suggest to H.P. older deskjet series (e.g. 870 C or 870Cxi] I had a few years ago, the 800 series with a parallel port on a Tecra 8100 with then first and went from Windows 98 to Windows 2000. It works perfectly under the two systems.

  Hope that helps a little... :)

  Welcome them

• Tecra A8-185 - the update of the BIOS under Windows 7?

  Hi again,

  I have a question how update of the BIOS under Windows 7 ultimate x 64. I downloaded the latest version of the BIOS for my laptop (Toshiba Tecra A8-185 PTA83E). After having unpacked there is only the .exe file.

  When I try to run this file, he said, that my OS is not supported. When I run it in compatibility mode (with Vista or XP), it starts the upgrade, but gives me an error: "the BIOS upgrade is failure (8). BIOS is not able on this configuration. "What should I do? I really need a new BIOS.

  Can I run it at the start of the USB key, or whatever?

  Hi offi55

  Why do you need a new BIOS? You may notice some problems with the laptop or why are you trying to update?

  However, I think that the update should only be done on the pre-installed Windows version (XP or Vista). I guess that this update n t tested and designed to update Windows 7 so I think that would be the reason why you can t.

  So to install Windows from the Toshiba Recovery disk and try to update again. It should work.

• Tecra 8200 - works very well under Windows 98SE, but not on Windows 2000

  Hello

  I've updated my Tecra 8200 for Windows 98SE and Windows 2000.
  Windows 98SE, wireless connection works very well and I was able to access the internet through my SMC Barricade router.
  But on Windows 2000, this no longer works.
  The connection to the router is ok, but I am unable to connect to the internet or to the page web administration of the router.
  The Toshiba Wireless Client Manager provides the following information:
  Status:
  ------
  Connected to the network: SMC
  Connection: Excellent
  Access Point name:
  Channels: 2
  Encryption: on

  ----------- Warning ----------------
  Impossible to communicate with the AP.
  Please check the encryption and IRQ.

  Yet once, I insist on the fact that under Windows 98SE, everything worked well... an hour ago...

  I am running Windows 2000 SP4 with the latest updates.
  Could someone help?

  Thank you

  François

  Hello

  Thanks for the solution. I hope that the installation of Windows 2000 Service Pack 1 helped.

  Good bye

• Portege 3440 ACPI BIOS under Windows XP errors

  Hello!
  There are error messages in the system log of my laptop under windows xp saying "AMLI:ACPI BIOS trying to read more... ». The Microsoft Knowledge base describes this problem as a behavior not secure the ACPI BIOS of the specifications. There is only one solution provided by microsoft - upgrade the BIOS to the latest version. Does anyone know is it more recent than the 1.6 for Portege 3440CT version? Toshiba does support Windows XP on Portege model at all?

  Hello
  According to the official website of Toshiba Bios version 1.60 is the most recent.

• Its P100-102 of satellite crackling under windows

  Hello

  now that my CMOS problem is fixed, I thought to post the following. Before it seems as if I'm a newbie, I can say that I am really experienced with desktop computers and I never had such problems. It seems as if everything changes when you switch to a laptop. As do not leave the adapter on which battery is charged cause it can weaken over time... boring CMOS unloads... do not suspend your laptop to too much heat because of the battery... and so on and so forth.

  Well now is the sound under windows... it seems as if every time that the tower is out of mode 'sleep', the sound is crackling ever. Same sound crackling "geeting out mode 'sleep'."
  I updated the audio driver and tried even new codecs and settings of the sound card. But it still crackles. Sometimes when I watch a movie, the film jumps then the sound is crackling. So, it's like a performance problem (such as playing a dvd on a 90 MhZ Pentium with 32 MB RAM).
  What could it be now?

  Hello Stefan

  As you can see the books are a little sensitive but don? t worry not about this. After only a few months, you won't want to use office more.

  Back to your problem: check the HARD disk activity while you watch the movie. Maybe that something is running in the background and disturbing him. As far as I know on this unit there are preinstalled virus NORTON security app. Try to turn it off for awhile and check if the device works better and faster.

  If this is your first laptop play a little with all the settings and check how all of the tools and utilities works. Believe me, when the laptop is well configured once it will work without problem.

• Word 2011 will not open docx file created under Windows

  Word 2011 will not open docx file created under Windows sent me by mail after I installed El captain.

  No problem when I create a new file and re-open it. Can anyone help?

  I don't know that someone on the Microsoft forums can give you some useful tips.

• Microphone does not work under Windows XP Home - P100

  Hi all

  I am a new user of French a P100-473 series and games. I have it downgrade to Windows XP Home edition for the goal of the game.

  I use conexant high definition driver v 3.11 and its working fine but not the microphone plug on the front of the laptop. I tried all the driver conexant Web 3.12 3.14 and after and the problem is reversed, the microphone does not work very well "using the audio msn Configurator" but I have no sound.

  The driver is working properly, no error, but not sound under windows. Does anyone have a solution for me?
  I have worked on this for 1 week and I really want to resolve the thing, because the cell phone is a great product and on vista, it works like a 486.
  Thank you very much

  Fred

  Hello

  On the Toshiba download page there is unfortunately no driver audio Windows XP Home edition for this laptop preinstalled Vista. Read some other assignments that I found the same reports sound works but mic cannot be used.

  Sorry, but it is clear at the moment, there is no solution to this stupid attachment problem. :(

  Just one last thing: try to install your own Vista without Toshiba has designed tools and utilities and let me know how your P100. ;)