Clear cache in the recovery menu

Similar Questions

• How to do the Recovery Menu (F11) functioning again?

  Guys please help...

  Currently, I had created the new partition and reinstall windows 7 on my HP Pavilion DV6-6001tx.

  Since then, I found this recovery menu (type F11) when the start doesn't work anymore...

  How to make appear the recovery menu working again? y at - it anyway to do it?

  For your info... the recovery partition always as it is...

  Depends on when you bought it, Recovery Manager was not provided until 2006 on HP laptops.

• Miss me the function clear history in the history menu Firefox

  I am currently using Firefox 21. Since the 19th, the function 'clear history' in the menu history Firefox disappeared. So no way click on it and clear the history you like, last time... or everything. I've uninstalled and reinstalled the browser several times without change. Only way to clear the history is by manually deleting on the left side of the window after doing Ctrl + h is it possible to set the browser?

  Do you clear recent history in the menu background?

• My fonts suddenly changed in Firefox, but not in other browsers. I solved all the duplicated fonts, cleared cache, and the settings in preferences are still on what they should be. What caused this and how can I solve this problem?

  Policies changed in the Firefox browser - not in any other browser.

  You can write a check for corrupted fonts and duplicate and other police issues:

  • http://www.thexlab.com/faqs/multipleappsquit.html - help book 2.0 fonts: looking for damaged fonts
  • http://www.CreativeTechs.com/IQ/garbled_fonts_troubleshooting_guide.html

  You can do a test of fonts to see if you can identify the corrupted fonts.

  • http://BrowserSpy.dk/fonts-Flash.php?detail=1
  • FontInfo: https://addons.mozilla.org/firefox/addon/fontinfo/

• How to use the recovery CD?

  Hello

  Ive lost the instructions to tell me how to use the recovery CD. I forgot, I need to press to access the disks when I reboot!

  Can anyone help please?
  St. Clare

  Hi clear, before using the recovery CD make you that all important data has been saved to the floppy or USB key because the procedure will erase the entire hard drive. The method for booting from a cΘdΘrom may vary according to the model number of your laptop, but it's something like hold the 'B' button for the Toshiba Startup logo. If this fails you can try to change the boot sequence or use the Toshiba from Windows or the BIOS configuration tool (ESC then F1 when prompted from a cold start) make CD-ROM the first device startup in the list.

  Richard S.

• Impossible to reinstall OS x El Capitan via the recovery

  10.11.2 OSX

  iMac 27 inch end of 2013

  3.5 GHz Intel Core i7

  NVIDIA GeForce GTX 775M 2048 MB

  DDR3 4 GB 1600 MHz

  My iMac is buggy since upgrade to 10.11. Some programs crash frequently, and just recently, the system began to be insensitive, that needs to be forced to withdraw from the machine. Usually, when the system crashes like this, the mouse moves, but he will be.

  Twice on startup until I received the No. or prohibitive symbol showing no disk or operating system is not found.

  So, I tried a system restore to reinstall El Capitan. Everything went fine until I select the disc to install to. Then the system stops responding again once, completely frozen and I can without restoring.

  So I tried a restore from Time Machine early in the day. I think that would help, but do it anyway. It did not help, the system is still buggy.

  I ran the disk first aid.

  Does anyone have any suggestions or ideas? What's wrong? Of fact need the operating system reinstalled? Why restoration is stalling?

  Thank you!

  I think that you have a failed disk drive.

  Screen of Mac OS X - grey or prohibitory sign appears during startup

  Question (?) Mark, record of flashing or a gray screen at startup

  It's related, but not identical questions. Their causes are described in based on Intel Mac-Startup sequence and error codes, symbols. Solutions will be found in:

  A globe or a flashing question mark appears when you start your Mac

  Mac OS X - grey appears during startup

  In most cases problems can be caused by one or more of these:

  a. problem with the computer's PRAM - see reset the PRAM and NVRAM on your Mac.

  b. boot, directory of the drive has been corrupted - repair with disk utility.

  c. critical system files are corrupted or deleted - reinstall OS X.

  d. the hard drive is physically non-functional - replace the hard drive.

  Please note that the information I have provided is what Apple recommends, if other users will suggest different solutions found here, then be sure to what they recommend has no impact on your ability to get the Apple continuous service guarantee, if any.

  Please do not start remove disks or change cables unless you know what you're doing and have exhausted other alternatives non-invasive described here. If you perform all knit yourself which is not approved by Apple, then you will void any warranty you can have and lose any other Apple support.

  Fix the hard disk and permissions

  Boot from your Snow Leopard installation disc. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  If THE reports errors, it cannot be resolved, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you do not have one of them or none of them can fix the disc, then you will need to reformat the hard drive and reinstall the OS X.

  The main difference if you use Lion or Mountain Lion, you must first boot from the boot Recovery HD simply HD recovery to perform the foregoing.

  Reinstall Snow Leopard without erasing the drive

  1 fix the hard disk and permissions

  Boot from your Snow Leopard installation disc. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  If THE reports errors, it cannot be resolved, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you do not have one of them or none of them can fix the disc, then you will need to reformat the hard drive and reinstall the OS X.

  2 reinstall Snow Leopard

  If the disc is OK then leave FROM and return to the installer.  Proceed to reinstall OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a new copy of Mac OS X, the installer will move your Home folder, third-party applications, elements of support and network preferences in the newly installed system.

  Download and install Mac OS X 10.6.8 v1.1 updated Combo.

  Relocation of Lion/Mountain Lion without erasing the drive

  HD recovery start: , restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears. Otherwise, restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager screen. Select the Recovery HD and click on the arrow pointing down.

  Repair the hard drive and permissions: at startup, select in the main menu disk utility. Repair hard disk and permissions as follows.

  When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the main menu.

  Reinstall/Mountain Lion Lion: Select reinstall/Mountain Lion Lion and click on the button continue.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than wireless.

• Since the installation of Firefox, I can no longer post to a group of goole - even after clearing cache / cookies as suggested

  I can connect to the uk d-i-y group, but when I try a post an error message / try the message later. After clearing the cache / cookies as Google indicates that the message is that the application needs updating - refresh page. Tried to re-Assembly of the group but no change.

  Sorry for the delay in my response.

  I know that certain features of Google are not compatible with other browsers, but those who are for the most of the features of Gmail and Google Drive. You should always be able to access your Google Group.

  There is the chance that an add-on or plugin installed in Firefox is the origin of the problem. To learn, you can try the Mode without failure of Firefox.

  Firefox Safe mode is a troubleshooting mode that disables some settings and disables most Add-ons (extensions and themes).

  (If you are using an additional theme, place you in default theme.)

  If Firefox is open, you can restart in Mode without failure of Firefox in the Help menu by clicking on the restart with the disabled... modules menu item:

  

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  The report please come back shortly.

• 24 Firefox need to clear the cache on the exit option

  I was going to enable the option to clear the cache at the exit and found this answer:

  https://support.Mozilla.org/en-us/KB/how-clear-Firefox-cache

  However, in firefox, 24, the Privacy tab is totally different from this page. My option has 'tracking', 'history' and 'Bar', instead of just history and location of the bar. Under "History" there is that the drop-down menu has no the "clear history when Firefox is ' and the 'Configuration' button

  Why this feature is removed from v24?

  To view the history settings and cookies, choose:

  • Tools > Options > privacy > Firefox will be: "use the custom settings for history".
  • https://support.Mozilla.org/KB/Options+window+-+Privacy+panel

  Note Firefox will disable the disk cache if you use 'clear history of Firefox closing. "
  
  You can see that by the section of cache disk missing on the subject: cache and and in ' Firefox/tools > Options > advanced > network.

• Clear cache original linking in the APEX

  I use the theme 4, Topaz. Region_Position_06 is a link from origin.
  
  I placed a chart of the company at this position on the zero page, and when a user clicks on any page, she leaves this page and go to the home page, a main menu page. So, no matter how deep, a user can be in the pages of the application, she can always click this logo image and return directly to the main menu page.
  
  It's convenient, but there is a problem. By clicking on this logo, does not clear the cache on the page that fate of the user or, indeed, on any page in the trail of pages, the user has taken to access the current page. I navigate especially with buttons and always empty the cache on a page when I'm out there. I need to find a way to do this when a user clicks on the image of the logo.
  
  I would like your ideas to solve this problem.
  
  Published by: Doug Sep 29, 2012 14:45

  Doug wrote:
  fac586,

  Thanks for your help. I think you have put me in the right direction. Now, everything I need to know is how to get there. You say "add a ClearCache parameter to the URL in the original linking." Clear the memory cache for the session would deal with the problem, but I need to know where to find the URL of the original linking.

  The original linking is defined in the attributes of the application (in APEX 4.x, click the button modify application properties on the home page of the app in the App generator). 4.2 the apex, there is an attribute of home page for each user on the User Interface tab interface. In previous versions, it is located on the Security tab.

  Always identify your version of APEX and so help can be provided...

• Why I can't access "clear recent history" in the Tools menu?

  When I use the drop down menu to the tools, I can not use "clear recent history" or "stop private browsing' because when I click on it nothing happens and they aren't printing darker than the other menu listings. I have been having this problem for a few weeks and am not real on my computer of fixation. I deleted foxfire and downloaded again, still no good. I have windows 7.

  This happens when private browsing or "permanent" private browsing session

  • See-> http://support.mozilla.com/en-US/kb/Private+Browsing

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• Satellite Z830 - 11 H, no options in the Recovery Wizard (seed F8 menu).

  Hello!

  I am trying to restore my Satellite Z830 - 11 H parameters using the F8 menu before starting.

  However, when I try to click on the Toshiba Recovery Wizard I get the window where I should be able to choose which process I want to (software factory or remove disk recovery) but instead, I have no choice.

  It's just empty. Do you have anyone encountered this problem before?
  If you have other strategies to restore factory settings, I will be happy!

  Hello

  Did you change the HARD drive or do you remove some recovery files, the files from the HARD drive in the past?

  Usually, you should be able to start the recovery disc HARD pressing F8, then choosing fix my computer-> Toshiba HDD recovery (last option)

  In the case of the HARD disk isn't possible, the laptop recovery recover using recovery media (DVD or USB flash memory stick).
  This support could be created using tool called Recovery Media Creator Toshiba

• I'm not clear how to use the recovery CD

  I added all the space using my HDD is it comes about 12 GB, I have 27.9 GB of disk space, but my drive has only 1.80 left disk space. I made clear to solve this problem. Basket is empty, I ran disk cleanup.

  A computer expert suggested that Windows might have become confused and cannot recognize what place I save, it might be because I ran a program called Cyberscrub often. His solution is to reload Windows XP home. My laptop came with recovery discs, everything else is already loaded. I have so much I don't want to lose on my laptop. If I use the recovery discs, I will lose everything on my computer, am I better off buying Windows XP home and re-load, in which case I will not lose my job?

  Also I am not clear how to use the recovery discs, I can't find instructions on what you are doing.
  The only person who could help me went to travel and not reachable.
  Any help greatly appreciated
  Lorraine Hart

  It of a very simple to recover the laptop.
  Just boot from the recovery CD and follow the instructions on-screen ;)

  I put t know what version recovery CD you have, but the older one provides the standard and expert mode. In expert mode, you can choose you partition where the OS is to be installed.
  So in this case only the selected partition will be formatted!

  But have you checked the size of the HARD disk in disk management?
  Simply click on the my icon my computer and choose manage.

  Of course, you could remove the internal HARD disk and it could connect to the external USB HDD controller. Then, connect the drive HARD to the second PC and you record data on another HARD drive.

• After the removal of recovery of Windows Trojan, now unable to see the files on the Start Menu

  After hitting him with the recovery of windows Trojan (which I think I deleted) using Malwarebytes' Anti-Malware and advance care system. Then I tried the unhide files which some became visible. Now although when I go to the start menu and click on a folder that they are empty, but if I go into my computer the files are there in the files. any help from anyone who has had the same problem would very be appriceated

  Thank you

  Stuart Austin

  Hi StuartAustin,

  Method 1
  Troy was not completely removed from your computer, I suggest you to scan virus online at the following link

  http://www.Microsoft.com/security/scanner/

  Method 2
  I suggest to create a new user account and see if that helps, the following link you will help to create the new user account.

  Create a user account
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
  http://support.Microsoft.com/kb/279783

  If everything works well in the new user account, I suggest you try the steps from the following link to transfer files and settings to the new user account.

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
  http://support.Microsoft.com/kb/811151

• When I start first the computer, the screen opens it is what I get "hardware profile/Configuration Recovery Menu. What can I do to get rid of this pop up?

  When I start the computer first, the screen opens with this: "recovery Menu Profile / Hardware Configuration.  This pop up screen has never done this before.  Why this is happening, and how do I get rid of him.

  Hi willfeeney,

  ·         Are you still facing the issue?

  Let us know the status of the issue.

• How to remove "HP recovery manager" from the start menu?

  A year ago, I had a virus attack on my computer. Knocked it completely. In the process of reinstalling the computer, HP Recovery Manager was added to the start menu.

  

  Now I need to remove it in the start menu because it takes an unnecessarily long time to start Windows. How can I do this?

  Sorry if this has already been written solution, don't know what keywords should I look for in this forum to get answers to my questions.

  Thanks for the reply

  Hi @teddykladdkak

  Welcome to the Forums of HP Support!

  I understand that you are looking for help to edit the boot options for your laptop. I'm happy to help you with this.

  I did some research and found this from Microsoft, and it looks like you need and covers several options:

  Modification of Startup Options - msdn.microsoft.com

  As a tip, I also include this eightforums.com page rom which can also be useful:

  Advanced start to boot in Windows 8 and 8.1 Options

  I hope this helps. Please let me know how it goes for you.