Clearly old objectives of SignatureTool

Similar Questions

• Remove old objects SnapshotUtilsEx * results by Bus error

  Hello

  We develop a PlugIn for CS6 that maintains multiple snapshots and are faced with the following problem. At times, we need free memory previously allocated by an object of SnapshotUtilsEx (by calling the destructor via del), which translates into a fall of InDesing. Strange thing is that if you remove the object immediately after its use (as can be found in the sdksamples) everything is going well, while deleting an old instant results in an accident.

  We hunted the problem to the bottom for a minimal example (see excerpt below), but were not able to find a solution, and we found no similar problems in the forum.

  Any help appreciated, we are happy to share more information if necessary.

  class bird: public CControlView

  {

  (…)

  private:

  (…)

  SnapshotUtilsEx * i_store_the_current_snapshot;

  SnapshotUtilsEx * i_store_the_previous_snapshot;

  };

  (…)

  MyView::MyView (IPMUnknown * boss)

  : CControlView (boss)

  {

  i_store_the_current_snapshot = NULL;

  i_store_the_previous_snapshot = NULL;

  }

  (…)

  This version works (but does not match our needs)

  void CMMCS6UIPanelWTFView::Draw (IViewPort window, SysRgn updateRgn)

  {

  (…)

  i_store_the_current_snapshot = new SnapshotUtilsEx (spreadUIDRef);

  i_store_the_current_snapshot-> Draw (IShape::kPreviewMode, kTrue);

  __DrawSnapshot (gPort, 0, 0, 200, i_store_the_current_snapshot);

  using SnapshotUtilsEx::CreateAGMImageAccessor() and IGraphicsPort::image (.)

  delete i_store_the_current_snapshot;

  (…)

  }

  This wok version IS NOT

  void CMMCS6UIPanelWTFView::NotWorkingDraw (IViewPort window, SysRgn updateRgn)

  {

  (…)

  i_store_the_previous_snapshot = i_store_the_current_snapshot;

  i_store_the_current_snapshot = new SnapshotUtilsEx (spreadUIDRef);

  i_store_the_current_snapshot-> Draw (IShape::kPreviewMode, kTrue);

  __DrawSnapshot (gPort, 0, 0, 200, i_store_the_current_snapshot);

  using SnapshotUtilsEx::CreateAGMImageAccessor() and IGraphicsPort::image (.)

  If (i_store_the_previous_snapshot! = NULL)

  {

  delete i_store_the_pre_previous_snapshot;

  }

  (…)

  }

  Hey Toke,

  don't know if useful for your purpose, but that's what we were doing to solve our problem.

  As said, we maintain several snapshots during the lifetime of our plugin. In the end, we did not store instances of the SnapshotUtilsEx class directly, but only of the "instance" of the _t_AGMImageRecord (defined in GraphicsExternal.h) struct. Retrieve an AGMImageRecord once you have a snapshot can is simply (screenshot-> CreateAGMImageAccessor())-> GetAGMImageRecord().

  What is a little tricky is to allocate memory for empty * baseAddr ('Member' of _t_AGMImageRecord), however, help came from the example of the SDK software PanelTreeView (PnlTrvCustomView.cpp, ~ lines 301-316, Ref. CS6 InDesign SDK).

  I am happy to lear more about this part of the API, so would be happy if share you something 'new', you have learned about it.

  Best regards

  Ferdinand

• LV2012 of memory Bug when clearing Compiled object Cache

  Here are a few weird behaviors LV2012 when to clear the cache compiled and having a project with source code separated from binary files.

  Steps to reproduce:

  1. open a VI in a fairly large project LV

  

  2. when the VI is open, clear cache compiled:

  

  3. close the VI.

  4. open the VI

  5 look at the broken arrow and false LV Out of Memory.

  

  BR,

  / Roger

  
  

• How can I place a new element behind an old object on the front

  is there a ' it forward "or"behind"button.  right now I just cut and paste the old item in front of the new element, but not a good way to do it... If it's a var shared in a loop, it may fall back in the wrong place on the block diagram when I stick it back in the front panel.

  Yes. There is an "Order" button in the toolbar.

  

• How to remove old objects of IOM resource

  I work with IOM Version: 9.1.0.1866.70 and I have recently said that we will not use a certain object of resources more.  I have watched and traversed the console design but I don't see any option to remove a whole resource.  Is it still possible to delete a resource of OIM?  I can turn off Auto down but our many admins provisioning will always have the possibility to grant the deceased resource.  Is it available in a future release of OIM?
  

  If you change the type of the object system resource, it will be more visible from the user interface for commissioning.  You must also remove it from any of your access policies.  If you really need to retire.  I suggest that you assign auto complete a task on your function to remove and revoke all your users of it.  If the resource will exist always, but no new users should get it, scoring as a system resource should be enough then will always trigger events of life to existing users.

  I wouldn't through the connector to uninstall your production.  If any other object present coins in use, uninstall will worry not about that and then other your workflow will be broken due to missing parts, but you get no warning.

  -Kevin

• How to plan to clear all alarms in Foglight on a specific date and time?

  Here's what I want to accomplish informing a group of people that all alarms will be erased and then foglight removes all the weapons on a specific date and time

  ..

  1

  I'd like to be able to plan / create a rule or any other option available to use... to be able to send an email through foglight or notification to a specific group of people telling them that all messages will be deleted.

  2nd

  What I'm looking for must be able to clear all alarms in Foglight to a date and a specific time.

  I just noticed this has not had a response.

  I hope that you could see the information contained in the KB, some items may have been written there so I recommend for anyone who wants to use it to test on a test server or check with the support, if there are recent scripts.

  How to purge the alarms? How to program the purge of alarms? (40651)

  Clear the alarms then X days (74729)

  How to clear alarms command line? How to program the clearing of alarms? (51324)

  Is there a way to clean only certain rules specific alarms? (73003)

  How to accuse reception/Clear old messages older then X number of days automatically (72146)

  Regarding the sending of notifications on a schedule, I think the simplest if to set that plan and create a rule with a true value, which is only applicable to this annex (annex rule or rule that is valid on a precise timetable) and has the action to send the notification to users on the alarms about to be cleared/purged.

  Hope this helps

  Golan

• How to create a copy of an object

  In my application, I want to make some changes on a custom object, also I need the old object restore, so I would like to create a copy of the object, please help me create a copy of the object,

  There is no API to do this, you must create a new object and copy all of its attributes, one for one. Take care to create new instances if all attributes are objects.

• Remove the old items

  Hello

  I have no matter what foglight will remove old object automatically each month.

  How can I do?

  Best regards

  Victor

  Shiva, as mentioned Bart if you remove objects of topology, the next time they are collected foglight them re-create if they do not already exist.

  David Mendoza

  Foglight Consultant

• objects vs C++ QML Dynamics

  normally I use ComponentDefinitions and create / destroy all my UI of QML, who works fast and easy.

  C++ only I use for business logic

  Sometimes I have to create a C++ user interface controls, in this case a sheet, because:

  If you use a spreadsheet with a NavigationPane or TabbedPane a TabbedPane root tab,

  then c++ findChild can not find 'behind' the leaf objects

  See this thread.

  so my solution is to create / destroy these leaves of C++, because then I can ask these leaves to find objects.

  It works perfectly and I will write blog and provide video HowTo handle this

  Now my questions to all the C++ / Qt gurus out there:

  What is the best way to create / destroy the leaf?

  Here is my code:

  1. open the sheet

  called from QML

  Create the spreadsheet and open it

  void ApplicationUI::openAdminSheet() {
      QmlDocument *qmlAdminSheet = QmlDocument::create(
              "asset:///admin/AdminSheet.qml");
      qmlAdminSheet->setContextProperty("REST", mKinveyREST);
      qmlAdminSheet->setContextProperty("sercar10", this);
      mAdminSheet = qmlAdminSheet->createRootObject();
      mAdminSheet->setParent(this);
      mAdminSheet->open();
  }
  

  everything works perfectly

  Sheet with TabbedPane opens on top

  I put setContextProperty of classes where I invoke methods.

  my business logic found objects such as DataModels, etc. drop-down menus using findChild() sheet as root

  When the work is done and user wants to go back:

  2. close the sheet

  called from QML

  close the worksheet

  destroy the roadmap

  call a function in QML. This function lives in the part of the root, so not executable from inside the leaf, but the roots after the closure of the leaf

  void ApplicationUI::closeAdminSheet() {
      mAdminSheet->close();
      mAdminSheet->deleteLater();
      QMetaObject::invokeMethod(Application::instance()->scene(),
                  "goHomeFromAdmin");
  }
  

  -------------

  now my question:

  I use deleteLater() to destroy the roadmap.

  is it ok?

  This means content will be deleted without danger?

  is this the right place?

  or should I only do the close() and connect to onClosed() Signal and then deleteLater?

  What happens if the user closes and opens very fast sheet and openAdminSheet() creates a new worksheet before execution of deleteLater()?

  Could it happen?

  THX for tips HowTo, go the safer way to create / remove sheets of C++ - even if the user clicks repeatedly on open / close?

  Hello

  1. open the sheet

  QmlDocument belongs to the default application. Where it is used to instantiate a single page, this page can be defined as the mother of QmlDocument, so they are destroyed together (this technique is described on this page).

  ...mAdminSheet = qmlAdminSheet->createRootObject();qmlAdminSheet->setParent(mAdminSheet);...
  

  Loading of the QML will take probably some time, perhaps that is useful to load the document once and store it somewhere, spawning objects if necessary root while reusing the QML. While it should work in theory, I have not tried this.

  2 destruction of the leaf

  Close() is not instantaneous. deleteLater() is asynchronous, but most likely will trigger before close animation is over, so I think it's safer to wait until closed() is triggered and destroy the paper after that. This can be done on the spot, something like:

  QObject::connect(mAdminSheet, SIGNAL(closed()), mAdminSheet, SLOT(deleteLater()));
  

  children of mAdminSheet should be removed safely if their parents are properly defined.

  > what happens if the user closes and opens the sheet very fast and openAdminSheet() create a new worksheet before deleteLater() run? Could it happen?

  mAdminSheet is only a pointer (a memory address). The real object is not destroyed even if the pointer is overwritten.

  After

  mAdminSheet->deleteLater();
  

  is called, it is prudent to reassing pointer in openAdminSheet. The old object will continue to exist until it is removed from the queue of events in Qt.

• Clear all alrmes 3 months.

  Hello

  is it possible to erase all the alarms of the last 3 months in one and not select page by page on Foglight 5.6.4?

  Thank you.

  It's easier using groovy code in the script editor.  The rule "Clear old LogFilter alarms" is a good example to start.  The code should be amended to include all the alarms and if you want to only 3 months, not all, you will need to change the time interval.  Here's the code for the original rule.

  def alarmSvc is server. AlarmService;

  def alarms = alarmSvc.getCurrentAlarms ();

  def now = new Date();

  def cut = now - @daysToKeep;

  (alarm in alarm) {}

  If (@reporterRuleID is {alarm.getRuleID ()})

  If ((alarm.getCreatedTime ()) .before (cutoff)) {}

  alarmSvc.clearAlarm (alarm.getID ());

  }

  }

  }

  You do not want to change: break def = now - @daysToKeep;  in the time range desired.

  In addition, you would remove the "if (@reporterRuleID == alarm.getRuleID ()) ' in order to clear alarms for all types of rules."

  You do not want to be careful with that, but if you want to clear all alarms, there is not much risk.  If you want to delete only the aspecific alarms or time specitif, then you will need to make sure to get good logic for the time range.

  I hope this helps.

  Jeff

• Array objects crushed

  I have a function that creates custom objects and grows in a table.
  Problem is that during the loop, all objects in the array are replaced. Obviously, it's some sort of error of mutability, but I really don't see how I can solve this problem!

  function myFunc(layers){
  
  
      // Create objects of all layers
      var myNodes = [];
      for (var i in layers){
          activeDocument.activeLayer = layers[i];
          var myNode = MyNodeObj(layers[i]);
          alert("created node - pushing to myNodes-list. lyrName is: " + myNode.lyrName);
  
  
          // Works until this point
          myNodes.push(myNode);
      }
      for (var i in myNodes){
          alert("test " + myNodes[i].lyrName);
      }
  

  I send diapers to the function and it passes through them, the creation of objects through MyNodeObj (using a class constructor). When the alert appears, I see that myNode.lyrName is different - the name of the active layer. However, once this item is pushed into the picture-myNodes it will overwrite all the objects inside.

  So for three layers (known as "Object1", "object2" and 'object3') table will look like this for the first entry:
  ["Object1"]

  then

  ["object2", "object2"]

  and finally

  ["object3', 'object3',"object3"]

  What happens here?

  EDIT: OK, so the objects are pushed to arrays as references - but for the numbers, they are pushed as a copy.
  Whatever it is, I tried to "disconnect" the old object reference by declaring myNode as an empty object initially and then by creating my object:
  var monnoeud = {};

  myNode = MyNodeObj (layers [i]);

  EDIT2:
  The underside does not either - if how it is supposed to fill a table with several objects generated?

  function myFunc(layers){
  
  
      // Create objects of all layers
      var myNodes = [];
      for (var i in layers){
          activeDocument.activeLayer = layers[i];
          myNodes.push( MyNodeObj(layers[i]) ); // Also doesn't work
          // Also tried this: myNodes[i] = MyNodeObj(layers[i]);
      }
      for (var i in myNodes){
          alert("test " + myNodes[i].lyrName);
      }
  

  MyNodeObj looks like:

  function MyNodeObj(layer){
  
  
      this.height = layer.bounds[3].value - layer.bounds[1].value;
      this.width = layer.bounds[2].value - layer.bounds[0].value;
      this.lyrName = layer.name;
  
  
      return this;
  }
  

  "I think that you missed the ' new 'in the line '.

  var monnoeud = new MyNodeObj (layers [i]);

• Can't resize object horizontally

  For example, in Illustrator 2015 if I draw a circle with the Ellipse tool, using the selection tool I can resize vertically by dragging a handle up or down, but I can't resize horizontally by dragging a handle left or right. Now made an opening in the circle of the right handle and the left handle resizes proportionally (used to be able to resize proportionally by pressing the SHIFT key). I could resize in all directions in the previous versions of Illustrator. Is - it is no longer possible to resize horizontally by dragging the handles left or right with the selection tool?

  Use: E for the free transform tool.

  Here are the new forms of living:

  New analytical features to Illustrator

  You can also convert the Live form to the old object by using the object > shape > expand your form.

• No transparency on a new object?

  I just updgraded to Illustrator 10 all the way to CS6 semi-force, and I notice some things that seem behanve differently. I don't know if they are 'normal' or not, but if anyone can suggest a way to change, that would be fantastic.

  The key is transparency. When I select an object that is transparent to 50% and then select the pencil and drawing early, the new object resulting has all of the appearance of the old object - line color, thickness of the line, the fill color - but NOT transparency. It always shows 100% opaque. I have to go, then select the transparency of 50% for each object, that I draw, which can be many things.

  Is there a setting that will allow new objects to "hold" the transparency of the selected object setting previously? Or should I really manually change the transparency of each after drawing it?

  It should keep transparency affecting as well.

  Make sure that ' appearance > new artwork has basic appearance is disabled. "

  Have you tried to save the original settings as a Style to see if the settings are retained by selecting the style?

• HELP: need to delete all the objects in the DB for EM12c

  Hello
  I'm in an interesting situation where the installation of EM12c failed (out of memory). Memory has been added, but at the same time, I lost the drive where EM12c has been installed, so I can't run the command (and of course there is no backup of that disk).
  
  $< OMS_HOME > / sysman/admin/emdrep/bin/RepManager < database_host > < repository_database_port > < repository_database_sid > - action dropall - dbUser - dbPassword < repository_database_password > - < repository_database_user > dbRole < repository_database_user_role > - reposName - reposPassword < repository_password > - < repository_name > < middleware_home > mwHome - mwOraHome < middleware_ora_home > - oracleHome < OMS_HOME >
  
  get rid of the current filing.
  
  Is there documentation of what I need to remove it from the database, so I can install EM12c again?
  
  Kind regards
  Andy

  The best way to get e new EM is to clean th House and recreate the database to house the repository of the EM. If there is any old object, tables... etc are left by the former repository in the database then the new installation of EM will complain about this.

  Consult the installation guide for of-install not http://docs.oracle.com/cd/E24628_01/index.htm

• Release the anchored objects

  Hello

  Is anyone know about a scrip to clear all objects rooted in a 5.5 InDesign document?

  Thanks in advance

  Maria

  HI Maria,

  Please use the JS code below but the code is your requirement has been resolved, according to me, this way is large round circle. If someone doing short fitness after my script to edit or change.

  var myDoc = app.activeDocument;
  var myPGItem = myDoc.allPageItems;
  for(j=0; j
  THX
  csm_phil