Click and drag does not work.

Similar Questions

• Click and drag does not work Magic Trackpad 2

  I have a new Magic Trackpad 2, paired to a Macbook Pro (mid-2014). It works for the most part very well, but I have a big problem. Dragging never works well. For example, if I want to move a folder in the Finder to a different location, I used for a click or select, then just drag it to the new location. Now it does not work or works so rarely that it is useless.

  I got the 1 trackpad, and I have no problem.

  Make sure that you are not too much pressure.

• HP Envy 17: HP Envy 17 Notebook Synaptics click & drag does not work

  My Synaptics-click & drag does not work. When I click on an icon it will highlight, then I click on the new icon and drag, and it do not drag. If I manual pushes the lower left corner of the Tablet and make it work. Sometimes it works but 90% of the time it does not work. The problem makes this laptop a laptop of poor and done really click and drag a pain.

  I deleted the driver and installed the latest driver HP Synaptics for my laptop than a couple of times and no luck. I even downloaded the Synaptics ' generic driver for win 8.1 "and it's worse. I can see why there are so many people not loving is not this Synaptics click on the button and I would certainly not buy another if this is not resolved. All other synaptics features work except this one.

  Any help would be greatly appreciated.

  REB

  Figured it out. My mistake. Must click twice VERY quickly and hold to drag on the second. I have been to much too much time between clicks and it wouldn't hang in the window or icon. Hope this helps others who may have difficulty with this.

• I've lost the ability to copy files on my CD player. When I drag and drop, the only authorized action is 'move' and it does not work.

  I've lost the ability to copy files on my CD player.  When I drag and drop, the only authorized action is 'move' and it does not work.   I tried press and hold the CTRL key while dragging, and when I do that all the other disks show "copy" as the default action, but when I hover over the action CD player available only changes to 'pass '.   I ran the Microsoft Troubleshooting tool for CD/DVD players and he said that the media were not writable, but there is a blank CD in the drive.  Any ideas on how to solve this problem?

  Thanks, but the cd/dvd drive works well - I can burn a cd with windows media player for example.  the problem is that I can't copy files to it.   I can play CDs (haven't checked the DVD).  I can not do and could do before, is doing drag and drop files on it.  The only authorized action is "move".   This happens even when I click CTRL + do drag.   I can copy it to any other player, but the CD player, and when I hover over the "exemplary" drive CD goes to 'move '.

  have you tried using a different suite of cd/dvd burning?

  Imageburn is free and easy to use: http://download.imgburn.com/SetupImgBurn_2.5.7.0.exe

  There may be something to play with your access keys if you have a (ie., wirekeys)

• loads of YouTube but then when I click on a video it doesent play. It worked fine the other day and it does not work in the past and suddenly. Help, please!

  loads of YouTube but then when I click on a video it doesent play. It worked fine the other day and it does not work in the past and suddenly. Help, please!

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• I'm on windows 7 and I upgraded to 10.0.2 and now it does not open. I completely deleted firefox and transferred again, and it does not work. So my last attempt, I removed firefox 10 again and downloaded the beta version and once more nothing.

  I'm on windows 7 and I've upgraded to the latest version of firefox, and now it will not open. I completely deleted firefox and transferred again, and it does not work. Then, I was that he could get through my firewall, and that has not worked. So my last attempt, I removed firefox 10 again and downloaded the beta version hoping that would make it and once again, nothing. It opens at all. Please help - y at - it a live chat or a number to speak to someone at Firefox?

  -Microsoft got a big update last night for the Windows 7 and I came this morning I was wondering if the update would help my FireFox. I thought it might because a lot of things in this forum said it was a security problem and they have been updated with security updates. SHAZAM! Firefox is now the new my browser to goto. Very happy to resume. Once more I did anything this morning, but click the icon after the big windows 7 update and we're back in business. Thanks for all your help!

• The date and time does not work.

  I have an iphone 5 c.

  The date and time does not work. This is the second time.  The first time was about 3 to 4 months again and now again after upgrade to iOs9.3.1.

  Even after trying to change it manually, time slows down or stops.

  Everyone has problems with their date and time?

  • Try a forced reboot: hold down the House and on the buttons until the unit turns off. Ignore the cursor off if it appears. Once completed, if it does not start on it own, turn off power with the key On. In some cases, it also contributes to double click the Home button and close all applications before restarting.
  • Restore factory settings (no backup)
  • Make an appointment at your local Apple store to have it checked.

• pages started freezing, force to quit and restart does not work

  Try to do the homework, no good with computers. I used screen split pages with safari, then I'll click to pages and the cursor does not blink, and I can ty click on something, but nothing helped. I even try to click in Safari and who does not work either. I have to then press the task or what you call it, force quit applications, then restart. It started just randomly and really annoying, see I need to deal with all my classes AP. Pages for this when alone as well.

  Hello ElliottRadovan,

  I understand that the Pages and Safari sometimes appear to hang when switching between the two. Fortunately we have some articles that detail how to identify and correct the source of the problem, restore stability to your Mac.

  Isolate problems on Mac OS X
  https://support.Apple.com/en-us/HT203161

  Mac OS X: how to solve a software problem
  https://support.Apple.com/en-us/HT201516

  See you soon!

• I just dug my copy of train simulator, and it does not work on Windows 7 64-bit. Ideas please

  I just dug my copy of train simulator, and it does not work on Windows 7 64-bit. Ideas please

  Thank you very much for all your suggestions. "Iwent with."

  This can help with some (but not all the) programs/drivers:

  (1) uninstall the program, if it is already installed. Then when install you / reinstall instead of double click on the Setup file, right click and select 'resolve compatibility issues.

  (2) then click on 'Try recommended settings' and in the next window, click on "Start the Program" to install it.

  (3) after he set up see if it works properly. Note: some programs may not be able to run in Windows 7.

  and it worked.

  did anyone tried the version updated? I read some rather disappointing reveiws.

  Once again my kind thanks for all your suggestions

• Help and support does not work.

  Original title:

  win xp my help and support does not work

  Windows Help and support will not work

  Hello

  1. what exactly happens when you try to open help and support? You receive an error message?
  2. what service pack is installed in the computer?
  3 did you changes to the computer before the show?
  To resolve this issue, start the Help and Support Center service and set it to automatic. Follow these steps:

  (a) click Start, run and type Services.msc.

  (b) double click on Help and Support

  (c) to set the startup type on automatic.

  (d) to Start the Service.

  See also:

  Menu help and bootable media will not open

  http://support.Microsoft.com/kb/555329

  Registry warning:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows

  Let us know if it helps!

• Startup and display does not work well.

  When I start Windows XP it takes about 4 minutes to the icons appears.  They appear of normal size and the screen turns white and the size of the icons and programs and the internet are extra-large. I go into display properties and reconfigure and find his game on 8-bit!  After configuration back to normal display and restart or turn on again the same thing happens!

  Also, I tried to do a system restore and it does not work either. Please advise me on what to do. Thank you!

  Hi RhondaHeaven,

  I suspect that your display card drivers are corrupted. You have your cd/dvd drivers? If this is not the case, download your display drivers (you will get the model and make from Device Manager - click on start-> settings-> Control Panel-> system-> hardware-> device-> display adapter Manager).

  Click Start-> settings-> Control Panel-> system-> hardware-> Device Manager-> right click on your display-> Uninstall adapter.

  Uninstall display drivers Intel of add/remove programs.

  Restart your computer. Reinstall the drivers from the cd or downloaded driver.

  I hope this helps.

• my windows xp is upside down. I tried Ctrl + Alt arrow and it does not work

  my windows xp screen is upside down.  I tried Ctrl + Alt + arrows and it does not work.

  Hi milton the monster.

  Check in Control Panel to see if you have a NVidia Control Panel or ATI Control Center icon. You have will depend on which video card to install on your PC. Click the NVidia or ATI and open Center Control Panel. Look carefully at the options and you should see an option for "rotate screen". Click on it and press the appropriate option to rotate the screen in an upright position.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Computer is very slow and IE does not work all the time.

  I bought a computer from my old employeer.  He is doing all sorts of things, or should I say not to do all sorts of things.  It is very slow and IE does not work all the time.  They have questions arise and ask if the administrator oks things and other things like that.  It came with any disks.  I would like to wipe, clean and load a new disc, but I don't know where to find the disc or if I can do it.   Can someone please?

  Hello

  Proceed as follows to contribute to these two questions. You can probably buy the disks of Vista machine to system or get
  the former employer to do it for you if necessary.

  Try these and it can also be a good idea to update your main drivers later. The General corruption can also play a
  role in this issue. And even the TCP/IP stack might need to be refreshed.

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  If no joy there's something blocking perhaps.

  Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE or IE with no addons

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only.

  http://www.Malwarebytes.org/

  --------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------

  Departure - in the search box, type-> order

  at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

  Type the following commands (or copy and paste one at a time), each followed by pressing on enter.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  RESET

  That resets your TCP/IP stack

  --------------------------------

  Maybe need of these:

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Dreamweaver cs5 change copy and paste does not work

  Dreamweaver cs5 Edition copy and paste does not work,

  So Windows 7 SP1. I tried to rename the follder config and start again and it does not work.

  Problem is when I select a file from windows Explorer, then go to Dreamweaver, choose the destination folder and editing/paste is disable, reverse operation is the same, selecting file in dreamweaver, editing/copy, go to the folder of windows Explorer and paste doesn´t work too. Anyone have the solution? (Sorry my English)

  Thank you!

  My copy of DW also works as you describe, I think it's just "the way that it is" in DW.

  To copy a file from another location on your computer to your site, copy it from the original location and paste it into the site folder within windows Explorer (do not use DW at all).

  You can also drag a file from your desktop to your files window in DW to make a copy.

• Cannot update apps. Impossible to reach on the adobe servers. What continues? Its bad enough I have to rent the apps now and it does not work yet. Ive turned off the firewall and my internet connection works perfectly. How to upgrade my applications?

  Cannot update apps. Impossible to reach on the adobe servers. What continues? Its bad enough I have to rent the apps now and it does not work yet. Ive turned off the firewall and my internet connection works perfectly. How to upgrade my applications?

  Hey, if the problem has finally been fixed! I thought you would like to know the solution.

  Select Preferences - network - system - advanced - DNS network - click + symbol - Type 8.8.8.8 - Ok - apply.

  That's all. Works perfectly now. Very much appreciate your help, thank you.