(Click two boxes) Text caption of failure that appears when the user double-clicks
Hello
I have two boxes a slide is clicked > the first click box is a simple click and the failure text caption is enabled > the second click box is a double click action, and the legend of the failure is not enabled.
When a user double-clicks on the second, click on the box that the legend of the failure is displayed from the first caption text. I'm cpatibvate is picking up the second click of the double click and so incorrect display in the first legend.
Is there a way around this problem? ISome contribution to this issue would be greatly appreciated:
Clickboxes are set up so that if you have the legends of failure turned on, then a click outside the click box triggers the failure criteria. So if you have two of them on the same slide, each will be considered a failure if you click on it.
Buttons work a little differently, then you can try to use the transparent buttons instead.
Another alternative is to use the widget event handler, which allows to implement various widgets to listen to different mouse events. The beauty of these widgets is that you have much more control over the criteria of rupture because you can specify events of different mouse for the success and failure on each of them.
Find out here: http://www.infosemantics.com.au/eventhandler
Tags: Adobe Captivate
Similar Questions
-
In a text box - Guidance Notes that disappears when the user types on?
Hello
I'm looking for a way to add Guidance Notes in a text box - that disappears when the user types on?
Thank you very much
GD
See:
-
How to make a text field required at run time when the user clicks on the box?
I had a form, there are several checkboxes fields and the text associated with the check boxes. If the use clicks on the checkbox then partner
text fields should become mandatory. I tried the change event and the click event of the boxes. There is error in the onChnage event and I got some odd results in the click event on. Sometimes, if the user clicks the check box, then for the 1st time the field is not required, then the user onclicks the box and when the user clicks the check box for the second time the field becomes necessary, but if I turns off the option highlight the field and selects the field becomes necessary even if the user onchecks I am totally confused! To add that I have also written an incorrect code always I reached the goal? How it can be possible. I write the codes below, please help me because I am working under a deadline from the client.
onChange event:
var = this.boundItem (xfa.event.newText) newVal;
if(newVal == 0)
{
xfa.resolveNode ("form1. Subform0.Subform1.Subform9.Subform10.Table48.Row4.Purchasecost3_1'). validate.nullTest = "disabled";
}
on the other
{
xfa.resolveNode ("form1. Subform0.Subform1.Subform9.Subform10.Table48.Row4.Purchasecost3_1'). validate.nullTest = 'error ';
}*/For the onClick event:
var a = xfa.resolveNode ("form1..") RawValue Subform0.Subform1.Subform9.Subform10.Table48.row2.CostItemRecovere d_OnlyEnergyCharges");
App.Alert (a);
if(a == 0)
{
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck__L1_1").validate.nullTest = 'error ';
}
if(a == 1)
{
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck__L1_1").validate.nullTest = "disabled";
}Please help someone!
Hello
You may need this resolved at this point, but here are a few tips.
An example of a loop in a dynamic array is here: Re: how to make invisible/visible or hidden columns with checkbox?
You are usually not necessary to resolve the nodes, especially when the script object is in the same table as the target objects.
For example if the table was not static your script could be simplified:
if (this.rawValue == "1") // this object is in Row2 { Row4.ComplianceCheck_L1_1.mandatory= "error"; ... }
However because you will be to loop through all the rows in the table repeatable instances / then you need to resolve the nodes. Take a look at the example above.
In your script, you have to Row8 Row4. I don't know if this is repeatable or just some of them. If we take Row4 as being repetitive, then you can apply the following to all repeatable lines.
var vRow4 = Table48._Row4.count; console.println("Row4: " + vRow4); // You can delete this or comment it out after testing
if (this.rawValue == "1") // this object is in Row2 { for (var i=0; i
I have not tested, but it should be close to work.
Good luck
Niall
-
A pointer that moves when the user navigates screen
I have a screen that contains different fields/images. Some of them are focusable and others are not. Is it possible to print/display an arrow pointer that moves as the user moves the wheel? And the arrow pointer can be on the oilfields focusable and non-focus when the user stops and wheel. It's like the pointer inside of a browser (office or by phone).
Is there a simple way to do this, or it will be complicated in a way...
Thank you
Man
Complicated enough without doubt.
You can override moveFocus() to set the position of the cursor. You need to avoid moving focusable developed by calling fields do not super.moveFocus (). If you want to set focus when you click, you could get the cursor position and then go the extra fields and call XYRect.contains(x,y) with their Field.getExtent ().
When scrolling you have to make sure the cusror is visible by calling setVerticalScroll(), setHorizontalScroll(), or maybe just Screen.scroll ().
-
Can the text indicating "See attachment" that appears in the body of an e-mail message edited?
When I join an e-mail text that says: "See annex" appears in the body of the e-mail message. I would like to change this text to say something else. I can't find where this text is stored in the settings, and I don't know yet if it is generated by thunderbird or the software that I use which called thunderbird.
Anyone know where this text is stored, or if it can be changed?
Nothing like what you're talking about, so I'm not sure that it really is.
When you click on write an e-mail and then add an attachment, I see nothing but a name of attachment in the upper right of the email.
-
Age of Empires (collectors edition) nothing that appears when the disc inserted.
Age of empires (collectors edition).
nothing seems to be appearing when I insert the disc
and I know not weather am I ment to happen something to download, a Web site or document? Help, please!You seem to have active AutoRun. Click the start ORB, then type in AutoRun and press ENTER.
A new box should appear, select the line of software and games, and use the drop-down list to select installation or execution of the program. Click Save.
Press the tab open on the DVD/CD drive and then close it (with your disk of Age of Empires, always in the drive)... now the installation option should appear.
Enjoy the game!
-
I can see how it may be convenient, but sometimes I work with very small elements and the little square handles block my view. I know that I can just zoom in, but I'd rather have these alleys handles.
Uncheck the box see the transformation Contols
-
"Post work site" screen that appears when the computer is started
I just bought a computer and after having turned it on, I have 4 windows to appear on my screen and I can't seem to get their past:
(1) X:windows\system32\cmd.exe-startnet.cmd--> within this window is written windows\system32 > wpeinit
(2) X:windows\system32\cmd.exe
(3) STRIP Workstation build 60--> this window asks me to enter a user Installer ID and PW, an install server, select a category of workstation (remote BAND Colocated, BAND strengthened, band, BAND SSWB)
(4) paper packaging--> says 'collection building Info '.
I see a possible Bank of America Logo background is the upper right corner, this computer is refurbished, but does that mean I can't ignore such things and get started? It won't let me shut down screen #3 until I get a username and ive treid to make things for the field, but he will not accept them.
Any suggestions?
Hello adatiaH,
These are the only screens that come up?
Are we able to get to a command prompt?
If so, what is the machine returns when we type the following command followed by
? winver.exe
EDIT: also, I wanted to ask a few other questions:
- You mentioned that you thought that this machine has been renovated. Where did this come from?
- Using Windows PE in your environment?
If this machine was purchased just, it seems that there are traces of its former owners out there. As is the case, you should probably format the machine and reinstall Windows later.
Let us know.
Best regards
Matthew_Ha
-
Configure the image should appear when the student clicks on the "submit" button?
What I'm trying to do is to make sure a student taking the test, when they click the button submit, an image shows on the slide (essentially to help provide better feedback). I have a set now standard action for the image to appear, but it does not appear when the user clicks on send, it shows up once the student clicks on screen/press y to continue - after the publication of the initial feedback box. I want the image appears at the same time as the legend of feedback.
Vish, this static button widget has NO break.
I offered a link to a static widget stopping in this blog (and mentioned in the article that I referred to):
http://lilybiri.posterous.com/what-i-dislike-in-Captivate-55
But since you're the COP6, you don't need this widget more since you now have forms that can be used as buttons. Here's a more recent post where I show the use case of the buttons on form on Question slides (with the tricks and traps)
http://lilybiri.posterous.com/want-a-button-on-question-slide-in-Captivate
Lilybiri
-
Make the text appear in the box when the user clicks on the part of an image
Is there an easy way to do this in the Muse?
(1) do different areas of an image map.
(2) automatically type the letter 'A' in a text box when the user clicks the area 'A' and so on.
Thank you!
Essentially, you want a keyboard on the screen? This is not possible with the standard tools of Muse. It would be quite simple with Javascript, however.
David
-
The text element values value when the user clicks a report line.
The text element values value when the user clicks a report line.
I have a report based on the EMP table and two elements P911_EMPNO, P911_DEPTNO. When I click on one of the lines the EMPNO and DEPTNO is copied to the text elements.
It works fine if I leave the EMPNO and DEPTNO as SHOW report, but if I then these clear values are not retrieved the report form (my javascript is very limited).
I need a method to retrieve the data hidden in the report and display in the text without the reposting of the page elements.
Also, would be nice if the line was highlighted until another line is clicked but especially is my priority.
Elements
P911_EMPNO, P911_DEPTNO (field of disabled text, saves the State)
Report
Select * from emp using the model of report below.
Custom model.
standard_report_cust_P330-a copy of the standard report with a change model.
BEFORE EACH LINE
< tr onclick = "selectRow (this);" #HIGHLIGHT_ROW # >
* Javascript in the Page Header.*
< script language = "JavaScript1.1" type = "text/javascript" >
function selectRow (p_tr)
{
var l_deptno = p_tr.childNodes [8] .innerHTML;
var l_empno = p_tr.childNodes [1] .innerHTML;
html_GetElement ('P911_DEPTNO'). Value = l_deptno;
html_GetElement ('P911_EMPNO'). Value = l_empno;
}
< /script >
If anyone has any ideas. Thanks, PeteHello
When you use this type of report model, you actually control on where the column values are used - and they can be used several times.
For example, a setting of 'Model line 1' for one such model could be:
<tr> <td class="c1">#1#</td> <td class="c2">#2#</td> <td class="c2">#3#</td> <td class="c2">#4#</td> <td class="c3">#5#</td> </tr>
#1 # fact refers to the data in the first column, #2 # for the second and so on. So you can do:
<tr onclick="javascript:dosomething('#1#','#2#');"> <td class="c1">#1#</td> <td class="c2">#2#</td> <td class="c2">#3#</td> <td class="c3">#5#</td> </tr>
For example, by clicking on the line would trigger the dosomething() function and pass in that the values of the first and second columns. Also note that the 4 # does not appear now - this column is 'hidden' (but note that you must check the box to show the column)
Andy
-
I'm new to programming of the Structure of the event. I am trying a program which causes the content of a control to the string to be processed when the user presses the button back in after typing in the control of the chain. I think (I hope!) that it is simple, I just can't understand how do.
Basically, I would take the attached VI and change so that the user can send the value of control 'String In' to the indicator "String Out" either by pressing the 'Return' key or press the button 'send string. '
Any help would be greatly appreciated.
This example has nothing to do with the RETURN key specifically. It fires all simply whenever the value of the control is changed. If you click outside the text box or on another still controls the value changes and still the event is raised. This is often the desired so if it works in your application, you good to go.
You CAN ONLY answer a particular key if you wish. Set your event to meet 'This VI' > key down. Then, read the proposal Vcle on the left side of the structure of the event and compare it to the RETURN (for example). The Boolean result of the comparison gets connected to a structure to deal with your code to run inside. You can also wire Vcle directly to a case structure and execute different code based on which key was pressed last.
-
I'm trying the menu that appears when a menu button is enabled in the style menu bar. I am able to style the menu bar and menu button in the action bar very well.
However, I was completely unable to style from the Menu that appears.
I asked the same question over to StackOverflow.com, but have not yet received a reply.
Basically I have a menu that is set up as a bar:
<MenuBar VBox.vgrow="NEVER">
<menus>
<Menu mnemonicParsing="true" text="_File">
<items>
<MenuItem mnemonicParsing="true" text="_New Project"/>
<MenuItem mnemonicParsing="true" text="_Open…"/>
<MenuItem mnemonicParsing="false" text="Quit"/>
</items>
</Menu>
</menus>
</MenuBar>I was completely unable to style the MenuItem or container here when they are indicated. I have dug through CSS of the skin of the Caspian Sea, but was unable to find out what anyone who specifically the. I tried to substitute the values of the ContextMenu, Menu, menu button and MenuItem that is located in the Caspian Sea, but nothing seemed to affect this menu.
The menu is clearly inconsistent with the menu system, so why am I unable to style it?
Isn't this possible? It will be possible in the future?
Thank you for answer two. Unfortunately, what was proposed was not enough to solve the problem by itself. I didn't know that .menu - the point has had a child of .label who could bear the title, but that alone was not enough to correct the problem.
Fortunately, Uluk Biy on StackOverflow.com was able to answer the question. He stressed that wanted me the property - fx-skin. I realize that I did not provide enough information here for users to come to this conclusion, so I wanted to thank you for helping with the little information you had.
It seems that, once I've added the property - fx-skin .context-menu, I am able to style menus.
Thanks again guys.
-
Is it possible to convert the standard numbered list to the list that appears on the same line a right after another?
Instead
- Insert text here
- Insert text here
- Insert text here
This
1 text goes here, 2. Text goes here, 3. The text here.
This revised list can take multiple lines.
I use InDesign CC2014 - if that makes a difference.
the only way is to convert numbered in the text (select numbered list > ctrl (or right click) > bulleted & numbered lists > convert numbered text).
Then, with search - replace, you can change the paragraph returns in space (or in space by commas as in your example)
-
When I go to the crop tool (or any other tool) there is usually a DONE box that appears on the bottom, to exit the tool. Recently, he disappeared. Now to finish the harvest I have to use the keyboard shortcut or click on the small little 'close' on the side. Is there a way to return the completed button? I have updated with the last update of the software and also reset all custom settings just in case I changed something accidentally. Any help would be appreciated.
Press the "T" key to go back on your toolbar
Maybe you are looking for
-
Access point: access to personal data?
Hello everyone. I have a question: if I share my hotspot iphone with someone, that person has access to my data?
-
Problem with file mp3 Toshiba Store TV +.
Hello I guess I'm one of the first owners and rather a smiling. He does what he says. However, there is a problem... I copied all my music on the disk library, when I check the files via computer, everything seems fine. When it is disconnected from t
-
unused monthly subscription and transfer to different countries
Hello world In fact I recently purchased a monthly subscription to a particular country, but had to cancel with a rare use, as it is necessary to use the same service to another country B. You know is it possible to move the remains minutes (almost u
-
HP G61 problem with charging the battery.
Dear Sirs, I have read so many posts but I could not find a solution, so I decide to post one on my own. I have a HP G61 and work properly it works. The problem I have is with the battery. If I scream at the bottom of the laptop and leave it with the
-
How to "Reinstall" quick start?
I replaced the HD with an SSD in my x 230 and instead of a full disk image, I was lazy and only restored the partition system (C). Well, I also wanted to see if the Migration of OS Paragon tool worked and he had only the option to select a source par