Clickable Manager

Similar Questions

• Session Manager does not start

  I did something different, but today when I started the Manager Session of Firefox is not pop up with my choice of session option more. I closed Firefox a few times and reopen and it just does more.

  It is not available as a clickable button and it is not under the Tools section. It is apparently still instailled since I can see it by going to tools > Modules > Extensions, but that's all. I can't access it.

  Please help, I had labels, I don't want to lose.

  Gen2K said

  I did something different, but today when I started the Manager Session of Firefox is not pop up with my choice of session option more. I closed Firefox a few times and reopen and it just does more.

  It is not available as a clickable button and it is not under the Tools section. It is apparently still instailled since I can see it by going to tools > Modules > Extensions, but that's all. I can't access it.

  Please help, I had labels, I don't want to lose.

  Update: I disable via modules and click activate again and my tabs back. Don't know if this is a permanent solution, but I have my already large lost tabs back so that's good.

• Explorer.exe freezes when Windows XP starts. Programs do not run but clickable.

  Start Windows XP.
  Click on I want to open an account.
  Type password.
  Windows desktop with icons appears.

  Start a hourglass when scrolling on her menu.
  Frozen, you won't fix.

  The Task Manager, end Explorer.exe
  Run Explorer.exe
  Freezes again but clickable for 2 seconds.

  All icons on the desktop clickable and says they are running but does not actually open.

  PC works fine in SafeMode w / networking.

  Help please,
  PC Professional, accounting files needed!
  SOS!

  The fact that your system works well in Safe Mode (w / network) indicates that a program run as part of your startup that causes this condition.  Safe mode is nothing else than Windows running with a bare minimum of programs and processes required to start your system (that is, all non-essential is cut off).

  This problem will be a proposal of chance.  You need start your computer Safe Mode and run a configuration manager (msconfig or autoruns) and disable programs that run automatically at startup, until you find the (s) which is causing your problem in a selective way.  First turn off non-Microsoft and programs that extend if necessary MS programs.  These programs will warn you generally if you try to disable something you shouldn't.  After you turn off some of them, you restart normally and see if the problem persists.  Once you find the program/process disturbed, the procedure is usually obvious as to the difficulty (usually UN-installing then re - install)
      
  Autoruns: <> http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx >

  Procedure using "msconfig".
  "How to solve configuration errors by using the System Configuration utility in Windows XP"
    <>http://support.Microsoft.com/kb/310560 >

  HTH,
  JW

• No network card in Device Manager

  Windows has started giving me BSOD about 2-3 weeks after the installation of new hardware (CPU, MoBo, RAM, sound card) with old hardware (GPU, power supply, HARD drive, more RAM). Why he gave me BSOD this long after the upgrade, I don't know, but I have an inkling that it may be due to a processor AMD will an Intel processor without reinstalling the operating system. I was also able to activate Windows (he has started to think it wasn't authentic) since slui.exe did not work. I changed the power supply because of the requirements of power increased and finally reinstalled the operating system and now have a new copy of Windows active and ready to go. No BSOD (so far) no driver issues, nothing went horribly wrong.

  In this context, I present you my current problem: just before I reinstalled the operating system, when a backup of my data, I noticed that I couldn't connect to the internet. It showed I was connected to the LAN but no internet. I got hurt like that before, but it was either something I could fix it by resetting the adapter or the DSL down. I thought it was just another thing that turned bad in Windows and that a reformat/reinstall would fix it, as it does most of the problems.

  The thing is, after reinstalling Windows, I noticed while I was installing drivers from the CD to the MoBo that the LAN driver was not clickable. I checked Device Manager and, of course, there was no topic network cards. Search the hardware changes do not work, and flashing the BIOS (via M-Flash) did not work.

  Since the MoBo is around the age of two months, I believe it is not a hardware problem, but is there another possible explanation? I'm going to RMA this mid-September if there is no solution at this moment here.

  My motherboard is a MSI 785GT-E63. I will give all necessary data to solve this problem. Thanks for all the advice I can get.

  There is no unknown devices in Device Manager, I installed all the drivers for all my hardware. I even downloaded the latest drivers from MSI site, including the network adapter driver, which I installed it without result on another computer.

  There is a setting to disable or enable the LAN, but it is set to 'Active '. I'm also leaning towards the network chip being broken due to overheating of the thought. It is a turn intermediate with a huge GPU and poorly ordered PCI/PCI-e slots. The single NIC that will fit must be PCI-e x 1 which are more expensive (about $30). I'm leaning toward move my computer to a larger Tower (the one currently resides in my brother's computer) or, as I've mentioned before, RMA'ing it.

  Thank you for your response. I'll see if there are any other ideas or suggestions before the agreed time.

• Clickable labelfield

  Is there a way to create a clickable labelfield? Or would I need to use a listfield even when there are only two entries?

  I would like a clickable label that covers the width of the container full, despite a short text.

  Use a movement Manager

  {Label
  gestureHandlers:]
  {TapHandler}
  onTapped: dowhatever
  }
  ]
  }

• Is it possible to make a clickable HorizontalFieldManager?

  I have a list of results coming out of a web service and am currently their display in a HorizontalFieldManager (I use it because there are a bunch of different data that make up a single result), that I was wondering if there is a way to allow the user to select a complete field as if it were a ButtonField or something like that.  Are there methods integrated that I can use?  Or would I need to write a new class that extends the standard HorizontalFieldManager?

  I know that on a BitmapField I can put in parentheses after that I declare it and override the navigationClick method to make it clickable, doing the same job for the HFM?

  the manager class is the navigationclick method. But first field in the Manager must have the focus - if there are no fields, this is not possible,
  You can add a nullfield to manage it, or, if there is already some fields, denied any clickhandling (not consume_click or navigationclick crushed) and click on the Manager.

• Win 7 Pro (in the field) pasted on a public network (not clickable)

  On 50 computers in a domain at the moment, I have one that is hurting and stuck in the unidentified network (public) and gives me an IP address of 169.x.x.x.x.  And - the public network is NOT clickable to change this setting for work or at home.

  I tried another one on the same Ethernet cable.  This other computer gets a DHCP address immediately.
  The computer problem - tried another cable.  Not fixed
  So I excluded the Ethernet cable.
  I have reset the TCP stack.  Tired of DHCP and even a static IP address.  Went to secpol.msc and strategies of the network list manager and changed things around.  I restored the computer to an earlier date (like a week before).  I removed the NIC card and drivers and re-installed.  I logged on to the computer as another user and tried.  Tried MS: http://support.microsoft.com/kb/2578723/en-us and that did not help.  Nothing has worked.
  I'm enough ideas here.  Any suggestions?  There was a power outage in my client's office, the other night for about 10 minutes and the computer that has been affected.  User light work, newspapers - view cannot start any client/server application, then notice no (public) network connection and here I am troubleshooting and exhausted all my troubleshooting steps.
  Any suggestions on this?  IV ' e read countless discussion forums, and surprisingly, no one has a solution.  Just weird as this computer that was in production as 3 years - today, goes nuts and decides to change public.  First time ever for this computer.

  He solved.  It was the Ethernet cable.  I should have tried it first - but of course, I tried that last.  Once I put a new cable in - cause instantly connected and no more.

• Smartphones blackBerry desperately need help: Desktop Manager, Media Sync

  Hi guys,.

  I am desperate for help. I have read through the Help menu and was functional on all night without success.

  Last night I installed the Desktop Manager from the CD that came with my 8310 and I also downloaded and installed the Media Sync application on the Blackberry website. Subsequently, I decided to download OS 4.5 since my curve runs only 4.2.

  I connected my Blackberry via USB and noticed that as soon as I do this, I can click is no longer on the Desktop Manager. I looked in the Office Manager in my system tray and confirmed that it "was still working", as well as in my task manager which revealed that he was still in the market.

  Possibly by a moat, I managed to get the Application Manager to work and tried to install OS 4.5. I heard that it takes a while, so I left it all night with my computer expecting to come back in the morning. When I go back to him, it was still in the phase of 'back-up device', but no progress in the progress bar. Looking at my curve revealed my usual home screen. As my button cancel in the request was not clickable, I had to unplug and put an end to the program using the Task Manager.

  I restarted the computer and I tried to start the Desktop Manager and plug in the unit. The Director of office prompted me for my password, I entered, and he said that it was a link on the blackberry and the Desktop Manager. I tried to click on the different options (Application Manager, Media Manager, etc.) but found that they were not clickable. Nothing happens when I click on them. I tried to look at the connection in the Options, but found that I can't click on that.

  I decided to try the next Media Sync. I opened Media Sync and put my password. After that I put my password, it says that it cannot connect to the device, please try again. I click Retry, nothing.

  I will go back to the Desktop Manager, unplug the blackberry, click Application Manager (as it is the only way I can make it work) and plug the blackberry again after that the Application Manager has started to work. I try to start the installation of the OS 4.5.

  He starts it connects to device stage, then stops and says that he "cannot connect to the device. You will need to enter a password on the device. ». No password box appears, and the screen of my blackberry only said that it is connected to the computer.

  I've included some shots of what's going on.

  Media sync

  Application Manager

  Director of office

  BlackBerry

  Please note that the Blackberry is the display that it is connected to the computer, but the Desktop Manager now says it is not.

  Questions

  For the screencapture above, please note how the Desktop Manager now says that the device is connected, but the same result can be shown with the Media Sync.

  The problem is now resolved, but I do not know why.

  Two days ago, I installed and then decided to uninstall Facebook. I downloaded the latest version of the Desktop Manager, once again, and when I plugged in my phone, it worked. I have tried since then with the same results.

  I'm really happy about it! But I still don't know what happened, or if the installation of Facebook had nothing to do with it.

• Since the update Windows 10, my CS5 Photoshop created jpg are no longer visible in Windows Explorer (File Manager)

  Since the update Windows 10, my CS5 Photoshop created jpg are no longer visible in Windows Explorer (File Manager).  I have reset Photoshop like application default for jpg files, rebooted.  Nothing has changed.  The ideas people?

  Hi R_Kelly,

  Hidden folder/file settings was the first place, I checked and kept checking each new reboot.

  I have copied below my temporary solution I posted in another forum thread.

  See point 7.  I found a way to make it visible again.

  1. I can see all jpg files created before Win10 update AND all the jpgs created by other programs, other than Photoshops after Win 10 update.

  2 Photoshop cannot see the newly created Photoshop created jpg files in the file picker at all since Upgrade to Win 10.  I've never had a problem of invisibility of file before winning 10 update.  My hidden files were always checked to be visible.  However, Photoshop can open if listed files in a basic text file search in Windows Explorer in the path of the file "recently used".

  3. the files are not visible or clickable at all in Windows Explorer tree or the Photoshop file selector. They become open and visible when listed in a basic text file search in Windows Explorer in the path of the file "recently used".

  4 Microsoft Office applications can't see the new Photoshop created Jpg files in file, only pre Win 10 update pickers jpg created by other applications and versions.

  5. the problem occurs only with Photoshop jpg created after the Win 10 update.

  6. I checked the settings "Show hidden files, folders and files of the operating system", and they remain as they were, which allows all the hidden to visible objects.  I kept the visibility settings files in this way since the early 1990s.

  Temporary fix below *.

  7. I did yet another simple search of the text Windows Explorer, he finds invisible jpg files less all links 'recently used' who were there yesterday (2nd day after I created the files), I checked the location of file properties file and it entered the original file I saved their.  Using a right-click of the mouse on the file to bring up the menu actions and file properties, I was able to copy and then paste the file into another directory.  I jumped on the directories to see if it remains visible and he (Yes). The new copy is now visible to the pickers of file in Photoshop and Microsoft Office applications.

  LizzyD

• I managed to install and started to build my site, to discover my library of widgets, States and scrolling effects selections don't respond to clicking on them or open somehow. I need to reinstall and start over?

  I managed to install and started to build my site, to discover my library of widgets, States and scrolling effects selections don't respond to clicking on them or open somehow. I need to reinstall and start over?

  Are you referring to the widgets etc that you have added to pages or the actual interface of Muse?

  If it's things on the page then you most likely have an empty element above them. Do a select on your page and make sure that there are no elements that overlap your clickable items. Also make sure your clickable items are highest in your layers panel.

• DIRECTOR SAYS PHOTOSHOP IS "UPDATE" AND IS NOT A CLICKABLE LINK. HOW CAN I DOWNLOAD IT?

  MY PHOTOSHOP TRIAL HAS EXPIRED. I BOUGHT AN ANNUAL SUBSCRIPTION. WHEN I CONNECT TO MY ACCOUNT, PHOTOSHOP IN MANAGER SAID 'DAY' AND IS NOT A CLICKABLE LINK. HOW CAN I DOWNLOAD IT?

  Hi [email protected],

  Pllease follow the steps in the KB and try to download or install Photoshop: http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html .

  Kind regards

  Romit Sinha

• Adobe Application Manager Me only allows you to download selected programs

  Hi all

  I just downloaded the application manager, and it runs great. However, more than half of the programs/applications 'Up to date' in a reading text greyed and are installable. The programs that read 'Install' in blue, clickable text download and run properly after download. See photo for refrence. Thanks in advance for any help!

  Best,

  Brandon

  

  Sorry for the delay of HaynesBM.  Our forums are very busy today with the recent announcement of creative cloud.

  Can you please check that you do not have available installers always listed in the Applications/Utilities/Adobe Installers folder?

  Also to reinstall Adobe Application Manager it will be downloaded and ask to install when you click on the download button for applications which can be found at https://creative.adobe.com/.  Alterantely you can download the Mac OS of Adobe Application Manager version from the link available in the #3 message.

• Phone number - asks clickable

  Hello

  Please forgive me if I did this wrong - this is my first post

  I created a PDF, Acrobat x on Win XP, that has "cells" or fields that can fill a Manager, but also an engineer

  What I can't do is make the field phone - CLICKABLE

  that is when the Eng open the PDF on his iPhone, using Acrobat Reader, they can click on the phone number to call the customer

  (In the same way, they could click on the address to open a map?-telephone link is the main issue though)

  Ideas, any help would be appreciated

  Thanks in advance!

  GUlNNESS

  Not possible, unless the call is made on a web site, in which case you

  to start this site.

  It is the same for a card.

• Application Manager - empty dialogue license agreement?

  I have CC on Mac 10.8.2.

  Successfully using PS, IA & ID, but cannot use the newly downloaded Acrobat Pro XI.

  Acrobat launches but after 5 to 10 seconds, she leaves and Adobe Application Manager is started. A dialog for the mainly empty Adobe software license agreement opens. The drop-down list reveals nothing, and clicking on the button accept has no effect. If I click on leave and then Manager of the Application closes.

  

  I see the dialog even if I run the application independently Manager application first, then try and launch Acrobat.

  Help please!

  Worked for me on MacBook Air (does not help you but just to let you know).

  When I started Acrobat by your step 3 above, I got the EULA screen with text and a clickable button.

  Check that the Suite is actually disabled via another app like Photoshop.

  So, maybe try to re - start and try again?

• Sprite under problem still clickable sprite?

  >
  
  Hi there, I wonder if someone can help me, I thought I was getting the hang of things and was well on course when I realized that some sprites I have should not be clickable when behind other sprites are indeed clickable. Even if you don't see them they work even when their area is clicked. ???
  
  I even went up to open an empty film and creating sprites (squares) 2, place a script on the background sprite that increments a variable and then covering it with another place, when I click on the top square the script on the bottom 1 is still running, I'm not sure if this is normal or I may have something set wrong in the Settings Manager?
  
  Any help and advice on this issue would be much appreciated... Thank you...
  
  Paul

  In order to disable clicking on sprites in a lower channel, place a
  behavior of 'empty' on the highest sprite:
  --
  on mouseUp me
  nothing
  end