ClickOnce _ Visual Basic Power Packs 9.0.0.0

Hei

My development environment:

-Visual Studio Express 2013 for desktop PC

-Microsoft .NET Framework 4.5.1

-Microsoft SQL Server 2012

-Windows 7

And the destination environment, where I am loading ClickOnce application:

-Microsoft SQL Server 2014

-Microsoft .NET Framework 4.5.2

-Windows 7

The problem:

-If the publication of a facility with application to destination Workstation, the ClickOnce - Setup requires Visual Basic Power Packs version 9.0.0.0 in the General configuration-> I have not found where I can download - I tried to download it but I'm not succeeded ok?

-If I select Visual Basic Power Packs including the ClickOnce, the ClickOnce finally give error, but the application does not work well

-> I'm not satisfied because I'm afraid of the problems that come in the future

How can I download the Visual Basic Power Packs 9.0.0.0 destination of the workstation?

Thanks in advance

MuhoSf

Hello

As the issue you reported is more complex that what is usually a Microsoft Community response, so I suggest you post your question in the forums MSDN from the link below:

https://social.msdn.Microsoft.com/forums/en-us/home?Forum=vbpowerpacks

Hope this helps, let us know if you need help with Windows.

Tags: Windows

Similar Questions

  • After installation of Visual Basic battery problem

    After the installation of Microsoft Visual Basic Express edition my battery indicator no longer works correctly.  It will show 100%, or 7%, or 3%, but will not regularly refresh to display the status of the battery.  I have windows XP SP3 and Visual basic installed.  Subsequently the battery indicator has hurt constantly.  I completely uninstalled the software but the problem remains.

    Windows XP SP3

    Toshiba laptop

    Microsoft Visual Basic Express

    Any problems with the battery indicator started after the installation of the software.

    Hello

    I would l suggest you re - configure the power settings in windows XP and see if it helps:

    http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/configure-power-management

    See also: http://technet.microsoft.com/en-us/library/cc730920.aspx

  • Installation problem with cumulative SP for Visual Basic 6

    I downloaded the cumulative update for service pack 6 for Visual Basic 6. The identification number is: VB60SP6-KB957924-v2 - x 86 - enu.msi. When I run the installation I get the error message: could not access network location Tools\VB\Controls\Controls_Backup. Any advice on what to do. I have Vista Home Premium build 6001 on a laptop Dell XPS 1330 with a lot of speed and memory. Thank you

    Windows Update Forum:

    It comes with Vista, upgrade install and activate Forum.

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon.

    Mick Murphy - Microsoft partner

  • Msvbvm50.exe, Visual Basic 5 necessary

    A program of design of the structure that I use cannot work and request that I see support.microsoft.com download and install a file named msvbvm50.exe, an installation of Visual Basic 5 file, I guess.    I could not find this file or the mention of it... I saw some information on VB 6 to VB 5.

    I also tried to download and install the latest Visual Basic Express.  The program I use is still ask for this former visual basic file.  I am running Windows 7 (with service pack 1).  The structural design software company and they sent me a direct link to 'their' site saying they had mentioned title VB 5 executable file called.  Clicked on the link and was sent/downloaded a zip file still contains the msvbvm50.dll, no executable file.  Not that I would know what to do with the executable, even if I find.  I guess I would click on it.  'Click'., like that. Or "Click-click"... like this.  Should go in computer engineering, I guess.

    Hello William,.

    Thanks for the Microsoft Community assistance approach.

    The right place to contact you would be supported in MSDN. I suggest you check with the MSDN help where you will have an exact answer experts working with Visual Studio.

    http://social.msdn.Microsoft.com/forums/en-US/newThread?Category=VisualStudio&Forum=

    I hope this helps you to get the problem resolved. If you have other problems with Windows, please post in the Microsoft Community. We would be happy to help you.

  • TOSHIBA Power Pack pack stopped working after 12 months

    Can't believe Toshiba power pack stopped working 12 months and 20 days after purchase.
    I bought the warranty 'extended', but it does not cover something external to the laptop.

    The unit itself is fine, but the Accessories pack must be less than this model (I've never had this problem with other laptops work).

    Cost was $ 110 to replace.

    Thanks Toshiba.

    Hello

    I agree with you, it's too expensive to buy a new one for $110. But the time for power supply operation 12 months is normal

  • orders or visa of TCP/IP by using visual basic

    What are the dll files and below that I need to communicate with a device via a rj45 by visbual basic cable, I can communicate when I use hyperterminal, but I can't via visual basic

    TCPIP::192.168.48.11: this is where I am stuck

    Hello

    The following tutorial will guide you through a few failures of measures to ensure that your instrument is connected correctly, this should help us understand whence the questions.

    Instrument Ethernet Control tutorial

    Introduction to the Instrument control using Ethernet

    Thank you

    Scott M.

  • License with Measurement Studio and Visual Basic 2008 Express problem

    Hello!

    I have a license for the professional edition of studio measure 8.5 and I use the express edition of Visual Basic 2008.

    I am trying to use the FFTfunction, but get the exception {"NationalInstruments.Restricted.AnalysisLicenser is unauthorized."}

    Does anyone have an idea?

    Thanks in advance!

    Andreas

    Here is the full error message:

    System.TypeInitializationException wurde nicht Festival.
    Message = "Der Typeninitialisierer as 'NationalInstruments.Analysis.Dsp.Transforms' hat eine exception caused."
    Source = "NationalInstruments.Analysis.Professional"
    TypeName = "NationalInstruments.Analysis.Dsp.Transforms"
    StackTrace:
    BEI NationalInstruments.Analysis.Dsp.Transforms.RealFft (Double [] realData)
    EIB LDS. LDS_Form1.ButtonFFT_Click (Object sender, EventArgs e) D:\devel\LDS\pc\LDS\LDS\LDS_Form1.vb:Zeile 1700.
    bei System.Windows.Forms.Control.OnClick (EventArgs e)
    bei System.Windows.Forms.Button.OnClick (EventArgs e)
    bei System.Windows.Forms.Button.OnMouseUp (MouseEventArgs mevent)
    EIB System.Windows.Forms.Control.WmMouseUp (Message & m, MouseButtons, Int32 clicks button)
    EIB System.Windows.Forms.Control.WndProc (Message & m)
    bei System.Windows.Forms.ButtonBase.WndProc (Message & m)
    bei System.Windows.Forms.Button.WndProc (Message & m)
    EIB System.Windows.Forms.Control.ControlNativeWindow.OnMessage (Message & m)
    EIB System.Windows.Forms.Control.ControlNativeWindow.WndProc (Message & m)
    bei System.Windows.Forms.NativeWindow.DebuggableCallback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
    bei System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW (MSG & msg)
    bei System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop (Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
    bei System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner (Int32 reason, ApplicationContext context)
    bei System.Windows.Forms.Application.ThreadContext.RunMessageLoop (Int32 reason, ApplicationContext context)
    EIB System.Windows.Forms.Application.Run (ApplicationContext context)
    BEI Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnRun)
    BEI Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel)
    BEI Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run (String [] command-line)
    EIB LDS. My.MyApplication.Main (String [] Args) in 17d14f5c-a337-4978-8281 - 53493378c1071.vb:Zeile 81.
    bei System.AppDomain._nExecuteAssembly (Assembly, String [] args)
    bei System.AppDomain.nExecuteAssembly (Assembly, String [] args)
    bei System.Runtime.Hosting.ManifestRunner.Run (Boolean checkAptModel)
    bei System.Runtime.Hosting.ManifestRunner.ExecuteAsAssembly)
    bei System.Runtime.Hosting.ApplicationActivator.CreateInstance (ActivationContext activationContext, String [] activationCustomData)
    bei System.Runtime.Hosting.ApplicationActivator.CreateInstance (ActivationContext activationContext)
    EIB System.Activator.CreateInstance (ActivationContext activationContext)
    BEI Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssemblyDebugInZone)
    bei System.Threading.ThreadHelper.ThreadStart_Context (Object state)
    bei System.Threading.ExecutionContext.Run (ExecutionContext executionContext, ContextCallback callback, Object state)
    bei System.Threading.ThreadHelper.ThreadStart)
    InnerException: System.ComponentModel.LicenseException
    Message = "NationalInstruments.Restricted.AnalysisLicenser is unlicensed."
    Source = "NationalInstruments.Common"
    StackTrace:
    AT NationalInstruments.Restricted.LicenseBase.ShowUnLicensedBehavior (Type type, object instance)
    BEI NationalInstruments.Restricted.LicenseBase.a (String Type A_0, A_1, A_2 object)
    BEI NationalInstruments.Restricted.LicenseBase.a (Type A_0, A_1 object)
    AT NationalInstruments.Restricted.LicenseBase.RunTimeCheck (Type type, LicenseContext context, object instance)
    BEI NationalInstruments.Restricted.LicenseProviderBase.GetLicense (context, type, object, Boolean allowExceptions instance Type, LicenseContext)
    bei System.ComponentModel.LicenseManager.ValidateInternalRecursive (context LicenseContext, Type type, Object instance, Boolean allowExceptions, license, licenseKey, String & license)
    bei System.ComponentModel.LicenseManager.ValidateInternal (Type type, Object instance, Boolean allowExceptions, license & license)
    bei System.ComponentModel.LicenseManager.Validate (Type type, object instance)
    EIB NationalInstruments.Restricted.AnalysisLicenser... ctor()
    EIB NationalInstruments.Analysis.Dsp.Transforms... cctor()
    InnerException:

    Hi Andreas,

    It is scheduled for any Visual Studio Express edition, because these editions do not allow 3rd party integration. So, you will need to perform some additional steps to get a license to work properly.  Refer to the Measurement Studio for Visual Studio Express Editions support KB (in particular, paragraph 2 pointing you to our help).

    Best regards

  • buffer size and sync with the cDAQ 9188 problems and Visual Basic

    Hi all, I have a cDAQ-9188 with 9235 for quarter bridge straing caliber acquisition module.

    I would appreciate help to understand how synchronization and buffer.

    I do not use LabView: I'm developing in Visual Basic, Visual Studio 2010.

    I developed my app of the NI AcqStrainSample example. What I found in the order is:

    -CreateStrainGageChannel

    -ConfigureSampleClock

    -create an AnalogMultiChannelReader

    and

    -Start the task

    There is a timer in the VB application, once the task begun, that triggers the playback feature. This function uses:

    -AnalogMultiChannelReader.ReadWaveform (- 1).

    I have no problem with CreateStrainGageChannel, I put 8 channels and other settings.

    Regarding the ConfigureSampleClock, I have some doubts. I want a continuous acquisition, then I put the internal rate, signal source 1000, continuous sample mode, I set the size buffer using the parameter "sampled by channel.

    What I wonder is:

    (1) can I put any kind of buffer size? That the limited hardware of the module (9235) or DAQ (9188)?

    (2) can I read the buffer, let's say, once per second and read all samples stored in it?

    (3) do I have to implement my own buffer for playback of data acquisition, or it is not necessary?

    (4) because I don't want to lose packets: y at - it a timestamp index or a package, I can use to check for this?

    Thank you very much for the help

    Hi Roberto-

    I will address each of your questions:

    (1) can I put any kind of buffer size? That the limited hardware of the module (9235) or DAQ (9188)?

    The samplesPerChannel parameter has different features according to the synchronization mode, you choose.  If you choose finished samples the parameter samplesPerChannel determines how many sample clocks to generate and also determines the exact size to use.  But if you use streaming samples, the samplesPerChannel and speed settings are used together to determine the size of the buffer, according to this excerpt from the reference help C DAQmx:

    Note that this buffer is a buffer software host-side.  There can be no impact on the material available on the cDAQ-9188 or NI 9235 buffers.  These devices each have relatively small equipment pads and their firmware and the Driver NOR-DAQmx driver software transfer data device to automatically host and the most effective way possible.  The buffer on the host side then holds the data until you call DAQmx Read or otherwise the input stream of service.

    (2) can I read the buffer, let's say, once per second and read all samples stored in it?

    Yes.  You would achieve this by choosing a DAQmx Read size equal to the inverse of the sampling frequency (during 1 second data) or a multiple of that of the other playback times.

    (3) do I have to implement my own buffer for playback of data acquisition, or it is not necessary?

    No, you should not need to implement your own stamp.  The DAQmx buffer on the host side will contain the data until you call the DAQmx Read function.  If you want to read from this buffer less frequently you should consider increasing its size to avoid the overflow of this buffer.  Which brings me to your next question...

    (4) because I don't want to lose packets: y at - it a timestamp index or a package, I can use to check for this?

    DAQmx will meet you if all packets are lost.  The default behavior is to stop the flow of data and present an error if the buffer of the side host DAQmx overflows (if, for example, your application does not pick up samples of this buffer at a rate equal or faster than they are acquired, on average).

    If, for any reason, you want to let DAQmx to ignore the conditions of saturation (perhaps, for example, if you want to sample continuously at a high rate but want only interested in retrieving the most recent subset of samples), you can use the DAQmxSetReadOverWrite property and set it to DAQmx_Val_OverwriteUnreadSamps.

    I hope this helps.

  • equivalent of variable static visual Basic in LabVIEW

    Hi all!

    I am doing a project where I count values. After I farm/Stop the program I want the value to be intact and continue with the last value.

    I know that in Visual Basic. Using the static variable, we can keep the same value we close the program.

    Kindly help...

    I know that in Visual Basic. Using the static variable, we can keep the same value we close the program.

    I program in Visual Basic. What you write, it's simply NOT true. Once you close a program all that static variables even disappeared.

    Do as suggested by crossrulz.

  • PXI-6561 HS - DIO Visual Basic 6 examples?

    I have one of these cards in a testing station.

    Is there an example of Visual Basic 6 code?  I see the code example for C.

    Edit: Can't beat Google. I searched on "examples of visual basic 6 hs - dio" and got http://digital.ni.com/public.nsf/allkb/C926233A47D2B8708625714D004F5D6F

    http://digital.NI.com/public.nsf/allkb/C926233A47D2B8708625714D004F5D6F

  • Visual BASIC

    Hello!

    Tell please how can I find and download visual basic 2010 or 2012 or 2015?
    Help, please.

    I'm stuck. I have not found the files to download!

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
    *
  • Visual Basic 6 / Visual Studio 2000

    Could someone help me please know where I can download a version for Visual Basic 6.0 or Visual Studio 2000 bug free?

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
    *
  • chrome in Visual Basic

    Hello.

    I have a big problem.

    I like to run chrome in Visual Basic (run in the vb as a webbrowser).

    Thank you.

    Help me

    Hello

    I suggest you post your question on the following forums:

    https://social.msdn.Microsoft.com/forums/vstudio/en-us/home?Forum=vbgeneral

    You can also post your query on Google Chrome forums. Check out the link:

    http://productforums.Google.com/d/home

    It will be useful.

  • How can I change the value of 'dd MMM yyyy' format in a datepicker from the Toolbox in Visual Basic

    I want to replace the regional format date and time. Please help. I have change the format 0 - dtpLongDate, but the problem persists.

    Hi Jay,.

    The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums.

    MSDN Forum (Visual Basic)

    http://social.msdn.Microsoft.com/forums/vstudio/en-us/home

    Hope this information helps.

  • How to automate the cutting through a visual basic 6.0 application tool?

    Original title: Visual basic 6.0

    How to automate the tool to cut through a visual basic 6.0 application. Or my visual basic 6.0 application is to take screenshots and save them as gif images, but the files are too big and take a long time to be sent by e-mail in real time. Please if someone could help, need a code in visual basic 6.0 to make these small files.

    Hello

    You can get support for development on the MSDN Forums tools.

    MSDN forums: Index

    http://social.msdn.Microsoft.com/forums/en-us/categories

    Concerning

Maybe you are looking for