Client DHCP fails to get a valid IP address when it is plugged in but it gets when it is connected to another

Similar Questions

• Client DHCP is unable to get a valid IP address from the DHCP server.

  Client DHCP is unable to get a valid IP address from the DHCP server. I have a home edition of Windows XP attempts to connect to my router wirelessly with wireless or wired connection but I get an error in Event Viewer with the discription DHCP 1007 error message. From what I researched, I discovered that the DHCP service depends on the AFD, TCP/IP and NetBT services. All these services are correctly place and worked very well (even the DHCP service is running without error) but every time I try to release/renew my IP address I receive than DHCP warning in the case where the viewer and I just cannot get a valid IP address of the server (router) I also have one of these verizon wireless G3 usb adapters and it works fine. I also have a good ping back when I try to do a ping localhost (for the closure) I also tried the preinstallation of uninstalled drivers from the adapter/s and nothing works. The only entrees in the registry for DHCP error are also AFD, NetBT and TCP/IP nothing else there, also all the files in the/system32/drivers afd.sys netbt.sys and tcpip.sys in addition to solve the problem, I'll mention that I installed and reinstalled Northon earlier, I do not remember if the problem appears before or after that. I receive also any error or warning in the security log or at least I don't know how to read: P

  Thanks in advance

  Thanks for the information.

  I hope you know that it is risky to connect the laptop to the Internet with no firewall and no antivirus... If this laptop is already connected to the Internet in this State, he is perhaps already infected.

  You said you know the router works because the other computers can connect successfully to it.  You should check the configuration of the router to make sure that it is not configured to limit the number of IP address it supplies, and (b) it is not configured to filter users by MAC address.

  When this laptop is connected by Ethernet, even if he gets the IP address of 169.254.x.y, can you ping the router?  Find the IP address of the router on any computer connected to it by running the ipconfig command in a command prompt window.  The "default gateway" is the IP address of the router.  Run the ping command in the command prompt window as well.

  If the ping is successful, it is possible that you might be able to use an IP address in the correct range for an Ethernet cable (but I doubt that it works for the wireless).

  It is very difficult to cite anything in this forum.  If you click on the link "Reply citing", all of the message to which you are replying is quoted.  You can copy the citation and delete parts of it, but it is not very user friendly.

• New configured vlan4 failed to get the IP address of our ad server

  Any guy who can help me: due to the expansion of network, I need allocate a new subnet 192.168.4.0 on our lan co. existing, 3 private LAN 192.168.1.0 (primary, all related Windows AD server and internet devices). 192.168.2.0 and 3.0 are Department LAN for user workstations. All desktop user on all the networks had the host Windows AD 192.168.1.20 IP. I used a new switch 6249 dell to configure a new VLAN 192.168.4.0, but user on this network failed to get IP of the host of the AD. Could someone give advice? Console > console en #show run! Current configuration:! Description of the system "PowerConnect 6248, 3.3.10.3, VxWorks 6.5! Version of the system 3.3.10.3 software! Passage mode is configured as disabled! Configure the vlan database vlan 4 vlan routing 4 1 output battery 1 2 Member out ip address 192.168.1.221 255.255.255.0 ip default-gateway 192.168.1.1 no ipv6 do enable the interface vlan 4 routing ip address 192.168.4.22 255.255.255.0 ip helper-address 192.168.1.20 ip 192.168.1.20 domain helper-address dhcp ip mtu 1500 output user name 'admin' password level 15 dhcp 0192023a7bbd73250516f069df18b500 encrypted l2relay dhcp l2relay vlan 4! interface ethernet 1/g13 switchport access vlan 4 output! interface ethernet 1/g14 switchport access vlan 4 output! interface ethernet 1/g15 switchport access vlan 4 output! interface ethernet 1/g16 switchport access vlan 4 output! interface switchport ethernet 1/g17 access vlan 4 output! interface ethernet 1/g18 switchport access vlan 4 output! interface ethernet 1/g19 switchport access vlan 4 output! interface ethernet 1/g20 switchport access vlan 4 output! interface ethernet 1/g21 switchport access vlan 4 output! interface ethernet 1/g22 switchport access vlan 4 output! interface ethernet 1/g23 switchport access vlan 4 output! interface ethernet 1/g24 switchport access vlan 4 Server snmp community public rw to exit

  Remove the routing of the 6248

  Delete the IP address that you assigned to 4 VLAN on the 6248

  On the S5624P create VLAN 4 and assign an IP address

  On the S5624P implementation of the programme of assistance to point to the address DHCP IP

  Make sure that the S5624P performs the routing VLAN.

• This copy of windows has failed the windows genuine validation.

  I get the following messages.
  ' may be victim of software counterfeiting.
  This copy of windows has failed the windows genuine validation.

  I ran the diagnostic tool and published the result below.

  Diagnostic report (1.9.0019.0):

  -----------------------------------------
  Given WGA-->
  Validation status: invalid license
  Validation code: 50

  Code of Validation caching: 0xc004c4a2
  Windows product key: *-* - X86GK - BQ8R6-2B9W4
  The Windows Product Key hash: otwCjetUnKokH4sIRWWvF1Jh0mA =
  Windows product ID: 00426-067-9529674-86380
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 6.1.7601.2.00010100.1.0.001
  ID: {4FADFC09-2F9F-4762-A0F9-9A67FC2D625C} (3)
  Admin: Yes
  TestCab: 0x0
  WGA Version: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Ultimate
  Architecture: 0x00000000
  Build lab: 7601.win7sp1_gdr.130104 - 1431
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  WgaER data-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  WGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Enterprise 2007 - 100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {4FADFC09-2F9F-4762-A0F9-9A67FC2D625C}1.9.0019.06.1.7601.2.00010100.1.0.001x 32*-*-*-*-2B9W400426-067-9529674-863805S-1-5-21-4040323424-3826660273-1778398338HP-Pavilion,RK571AAR-ABA m7780nPhoenix Technologies, LTD. 5.0820070330000000.000000 + 000BF603407018400FA04090409Pacific Standard Time(GMT-08:00)03HPQOEMSLIC-CPC100100126A2E2BE3F5B56CEw6MDp4yS8TlZEZ8QEMOPF8jblKI = Microsoft Office Enterprise 2007 81599-871-1537561-65389 1

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Ultimate edition
  Description: operating system Windows - Windows (r) 7, retail channel
  Activation ID: a0cde89c-3304-4157-b61c-c8ad785d1fad
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00426-00172-067-952967-00-1033-7601.0000-0742013
  Installation ID: 003244687483286725250224860754582221818646363405760155
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 2B9W4
  License status: Notification
  Reason for the notification: 0xC004F200 (non-genuine).
  Remaining Windows rearm count: 4
  Trust time: 15/03/2013-14:00:31

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0xC004C4A2
  Beyond: PASS
  Event timestamp: 3:15:2013 13:30
  WAT Activex: registered
  WAT administration service: registered

  --> HWID data
  Current HWID of Hash: MgAAAAEABAABAAEAAAABAAAAAgABAAEAeqjOwrhH7Ngu9/omeKQkLlSZBIPgaXZYKoU =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0x0
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  HPQOEM APIC-SLIC-CPC
  FACP SLIC-CPC HPQOEM
  HPET SLIC-CPC HPQOEM
  MCFG SLIC-CPC HPQOEM
  SLIC SLIC-CPC HPQOEM
  SSDT HPQOEM SLIC-CPC

  Yes the sticker of the product keys match the diagnostic report. I've been running this product for more than two years and now all of a sudden it is not valid?
  I recently had a problem with hard drive with this machine and had to reinstall the system and restore data from a backup. Is it possible that this has some how changed the PID at the origin of this problem?

  If I have no choice but to buy a new OS can spend to Win 8 or will I run into a question?

  As I said before, "No matter how long he ran 'okay'..." »
   
  Copies MSDN work very well - until Microsoft discovers that they have been used in a way not scheduled (they are sold by unscrupulous people who probably to sell at an attractive price in comparison to other copies - a lot of people don't care about questioning why they might be cheaper.)  Others may sell at the same price and make more money before disappearing).
   
  You have an MSDN copy.  Your PID has not been changed by restoring the backup.  ;-)
   
  You can try changing your product key of Windows 7 than on the sticker:
  http://pcsupport.about.com/od/osproductkeys/HT/change-Windows-7-key.htm
   
  Then try to activate by phone:
  http://www.SevenForums.com/tutorials/18715-activate-Windows-7-phone.html
   
  And come back to report to what past.

  What operating system do you have on the laptop before? You can get a Windows 8 upgrade for that - but I would not honestly - recommend it because the difference is quite obvious and you haven't checked your software and hardware is supported on Windows 8, I know. My recommendation for Windows 8 is to use * if * the system you have came from the manufacturer with it pre-installed. :-)

• I use home to get on the net and there dncp but I get an error not a valid ip address

  I have through my husbands computer network and there srt dhcp upward on his we have a special, but I can't get my computer to connect to the internet through its it is not a valid IP tried everything

  Hi Sallie,
  Follow step 1 in this guide: http://www.selectrealsecurity.com/fix-internet-connection
  If you have any questions, just ask. Let me know if this helps you.
  Brian

• FUSION IN: ORA-30926: failed to get a stable set of rows in the source tables

  Hi all

  Database Oracle 12 c Enterprise Edition Release 12.1.0.1.0 - 64 bit Production 0
  

  PL/SQL Release 12.1.0.1.0 - Production 0

  CORE 12.1.0.1.0 Production 0

  AMT for 64-bit Windows: Version 12.1.0.1.0 - Production 0

  NLSRTL Version 12.1.0.1.0 - Production 0

  When you use the MERGE clause, if executed more than once, I get the below error

  ORA-30926: failed to get a stable set of rows in the source tables

  create table CBC (nums number, sname varchar2 (10))

  create tar (tnum number, tNom varchar2 (10)) table

  Insert in src values (1, 'a')

  Insert in src values (1, 'b')

  Insert in src values (2, "c")

  merge into tar

  using the CBC

  on (nums = tnum)

  when matched

  then

  update the value tNom = sname

  When not matched

  then

  Insert the values(snum,sname);

  What expect, it's that first time itself (when inserted), he must raise the error. But it's not.

  Select * from tar

  TNUM TNOM

  1 b

  1 a

  2 c

  But if we run for the second time it shows the error.

  I saw the document of the Oracle and he said

  MERGEis a deterministic statement. You cannot update the same row in the target table multiple times in the same MERGE statement.

  I've seen below cela son but failed to get the solution for this.

  MERGE STATEMENT ORA-30926: failed to get a stable set of lines in the source

  Nondeterministic fusion?

  Someone at - it make a clarification?

  I don't want to insert records into the first time itself. for example, to run the first time he must raise the error. can I do this using MERGE?

  Thank you

  Hello

  O - O wrote:

  Thanks knani, Frank.

  One more doubt.

  When you run the MERGE statement, the first time, there is no rows in the target table, so no rows in the target table is what it is.

  So we cannot perform below sqls using MERGE when the target table is empty?

  insert into tar values (1, 'a')

  updated tar tNom = 'b' set where tnum = 1

  insert into tar values (2, "c")

  Is - that means that the MERGER will be only works with validated data?

  Right; a MERGE statement will not update a line which has been previously inserted into the same MERGE statement.  All fact tables reference to the data in the tables by the time the MERGER began.

• Failed to get the status of printer/bizhub Konica Minolta C654e

  Failed to get the status of printer/bizhub Konica Minolta C654e

  Cannot print from my Mac.

  With the limited information you supplied I would check the configuration of the print queue. If you open information system (located under Applications > utilities), you will see a column on the left and if you select printers the right pane displays the print queue information. Note If you have multiple printers, you can select in the right upper pane to view its information in the bottom right pane. Can you copy this information and paste it here.

• He fails to get firefox on an ipad 2 (full screen)?

  He fails to get firefox as an application on an ipad 2 (full screen)?

  Apple restrictions prevent us from distributing Firefox for iOS (iPhone, iPad, iPod Touch) devices. But you can install Firefox Home, a free application that allows you to access your Firefox tabs desktop, Favorites and history on your iPhone, iPad or iPod touch.

• Have Windows 7 running on Parallels Desktop with a Mac. Get "setup.exe is not a valid Win32 application" when trying to download a program with Windows Explorer. I can download from these sites with Vista and XP with other computers.

  Have Windows 7 running on Parallels Desktop with a Mac. Get "setup.exe is not a valid Win32 application" when trying to download a program with Windows Explorer. I can download from these sites with Vista and XP with other computers. Now, I can't download the programs that are supposed to solve the problem! including FoxFire

  Try to download from this site:

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

• AppleScript Error-1728 - failed to get document 1

  I'm trying to find out why my AppleScripts I use for automation of numbers do not work this month.

  I have several scripts that I built for the treatment of the expenditure reports and I ran them last time in February with no problems.  Whenever I now them I get the following error message:

  error "Numbers had an error: failed to get document 1." the document number-1728 1

  I looked at this post: https://discussions.apple.com/message/29854515#29854515

  I have not found the cache file listed in the directory of ~/Library/Caches... ask yourself where the hell numbers may be sticking this file in order to remove it and see if this solves my problem.

  All I have this problem or knows where I could find the file cache for numbers?

  Thank you

  Rich

  To solve this problem...

  I had to remove the container file to ~/Library/Containers/com.apple.iWork.Numbers and my scripts are back and working again!

• Satellite P100 - 307 Error Message: "failed to get read handle.

  "Failed to get read handle." Error message that appears whenever I start my laptop. HELP, its boring

  Error message that reads "Failed to get read handle." lies at the heart of my screen. Strange that it has an OK button, which means that the computer expects me to think it's ok. It's like the 'So what' button which really did not help them that my computer failed to get read manages? How can I get rid of this message? And why he's here.

  It's like setting up a new cell phone and the first time you receive your new number to a text message comes on the screen saying "Otta OK." Who the hell is Otta and what was wrong with Otta initially. In any case, anyone could help me with this, I would of course welcome.

  Hi Thorsten

  My first question is; What to hell you have on your laptop?
  I never saw the message as "Failed to get read handle."
  I have goggled autour and nothing!

  Are you able to get into the operating system? O If yes try to restore the operating system to the beginning.
  I put t know what you have installed or not installed on the device but I can t believe this is happening without any reason.

• Tecra M5 fails to get an IP with the Orange Livebox

  I have a new Toshiba Tecra M5 notebook.
  When I try to connect to my Orange Livebox wireless, he manages to connect but fails to get an IP address.
  I spent the days to try.

  I followed previous assignments on it, but no one seems to have posted a definitive answer. I tried update driver lan wireless etc but got nowhere.

  Someone please help before I go nuts.

  and check if the new version of the driver Wlan is available to use the Intel 2200 b/g card and this work after driver update

• When I try to log the p2p soulseek site, I get the error message "connection failed: socket error.» change the connection settings. How can I fix it?

  "socket error".

  When I try to log the p2p soulseek site, I get the error message "connection failed: socket error.» change the connection settings. How can I fix it? Is - this type of error called a winsock error?  It keeps happening to me on this site. What I've read, it happens when you make changes to a program before concluding that under its weight. Could it happen because I'm deleting files, I don't think that will be completed while the other files are D/Ling? That's what I'm doing wrong? I found a solution to correct an error in Winsock that is to enter the "command prompt" and type "netsh winsock. Will this work? (I'm sorry I have so many questions in this post, but I have had TO KNOW!!)

  Hello

  I suggest you send the question here for best support about the issue.

• Svchost.exe with service Client DHCP [Dhcp] and DNS Client [DNScache] high memory use

  I'm using Windows 2003 standard Server SP 2 found problem svchost.exe run service Client DHCP [DHCP] and DNS Client [DNScache]
  use a lot around 2 GB of memory. Virus scan try and Hijackthis is not found. I try to restart memory return service.

  I have 4 servers and the same symptoms.

  Anyone know why it caused?

  Hello
   
  Your Windows 7 is better suited for the public of Windows Server on TechNet. Please post your question in the TechNet Windows server forum.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

• Windows has failed the windows genuine validation

  I wanted to open a file to windows 2007. Guest computer to download the compatible pack before you download. I did, but he says that windows failed the windows genuine validation. So I followed the instructions. My screensaver is also gone and there is no icon on the lower right side of the computer that says you may be a victim of software counterfeiting. How can I go further?

  Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

  Assuming that "a windows 2007 file" means a file Office 2007, also specify your version of Office installed (for example, Office 2002 SP3).

  The foregoing despite...

  Please visit http://www.microsoft.com/genuine/ and click on the button to validate Windows or validate Office, and then restart your computer.

  If you were not able to validate, follow these steps:

  1. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062

  -Online Windows XP: double-click the executable file to run the tool.

  -Online Vista & Win7: right-click on the executable and select run as administrator to run the tool.

  2. after running the tool, click on the Windows or Office as appropriate and then click copy (to the Clipboard).

  NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

  3 start a new thread in the appropriate forum of Microsoft Genuine Advantage and paste the results of the WGA or OGA data diagnostic in a detailed post tool: http://social.microsoft.com/Forums/en-US/category/genuine

  4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft