Client DHCP is unable to get a valid IP address from the DHCP server.

Similar Questions

• I am unable to get ios mobile to connect to the Office Server, what can I do?

  The number of the server is the same on mobile than on approx. desktop Mobile application gives an error message stating cannot download archive server. What can I do to fix this?

  I assume you mean the developer app PhoneGap and the desktop PhoneGap app?

  If so:

  • Your device must be connected to the same network as your development computer.
  • Make sure that the versions of the PGDevApp and PGDesktopApp are up to date.
  • Try with a freshly created project - if it works, something can be upward with your particular project.
  • Add ports that pgdesktopapp uses to your firewall settings so that data can flow freely. You can temporarily disable your firewall to see if that's the problem.
  • You may need to add an exception to your antivirus software. Again, you can temporarily disable the AV to see if it is causing your problem.

• I can't find the ip address of the print server on my router, DHCP clients

  I got the wireless-g WPS54G print server at a yard sale and have downloaded the Setup Wizard.  Everything looks fine until step 7, select print server.  Could not find anything.

  Before that, I tried to access the print directly through its ip address server, but can't get it.  I checked all the IPS on the main router and found everything except the print server.

  Everything is setup, more than once, exactly as defined in the steps of the installation wizard.

  I have Windows 7 and a computer laptop 64 bit.

  Any suggestion would be great.  I already spent 2 hours on this thing and am determined to make it work.  All the lights on top of the blink/light print server as it should when they should.  I was not wireless yet, still trying to get this Setup program.

  Thank you

  Chris

  Connect to the print server with the Ethernet cable to the Ethernet port on the router.

  Press the reset on the print server for 15-20 seconds.

  You could get the printer test page, mentioning the IP address of the print server.

  If this is not the case, the print server and the router to power cycle.

  Open the router setup page and check if you have the IP address of the print server in the DHCP client table.

• VMware workstation 8 briged connection cannot get an ip address from the dhcp server

  Hello, I hope someone can help me with this problem, my virtual machines are unable to obtain an ip address from my dhcp server in windows server 2008R2.

  VMware workstation 8 is running in windows 7 proff. 64-bit OS. My gets physical computer an ip Server dhcp without problem have access to the internet and everything works fine, but my VMs for some reason any cannot obtain an ip address from the DHCP server.  I updated virtual nework Briged editor one of my physical network interface cards. Then I put my VM NIC to briged in for some reason my VMs are unable to obtain an ip address. The ips only I get are 169.254.43.129 Add 255.255.0.0. any help would be very happy. Thank you very much.

  FYI - you have posted some of the vmware.log

• Registry files have been deleted via a Norton 360 3.0 registry clean up - can't get an ip address from the router

  I'm running Vista Ultimate, -connection (Ethernet) with Verizon FIOS I ran a Norton registry clean and foolishly trust what he says to remove.

  At first, all of my USB cards have been screwed up (noted in the Device Manager with exclamation next to each one points)
  I did a system restore and that corrects this problem, but now I'm having a problem with my network card.
  , All diagnostic tests, etc. show that the material is very good. My router is also fine the problem is that windows can't get an IP address from the router and then assigns his own
  (a # 169 instead of a # 192)
  In the network connection properties, it says that the device is functioning correctly, and the driver is up-to-date.
  'Connection speed' tab: a window of diagnosstics is: I ran testto test adapters connect to connect to the network.
  Results: connection Test
  Test details:

  I have "this card is configured to obtain an IP address automatically. No DHCP server is present on the network. Windows selected an IP address by using the alternative private IP addressing. »

  X "Ping 0.0.0.0 Gateway: failure.
  !  "No DNS server is available for this connection.
  ! "No WINS server is available for this computer.
  X "Ping 0.0.0.0 network: failure.
  ------------------- -------------------------------------------------------------------------------------------------------------
  In this same window of diagnostics under the "LinksTab".
  Link current test status: (what is determine the current connection speed of the adapter and link partner)
  Results:
  ! The adapter is configured to negotiate the speed with the link partner, but 1000 Mbps was chosen as one of the possible speeds.

  The best link options-results of the speed test:
  ! Could not detect way reliable speed and duplex settings. Possible speed/duplex settings are 100 Mbps Full Duplex and Half Duplex 100.
  (Note that these link tests are online and I can't online)

  Also in the Diagnostics window-under the 'Cable' link cable - past-polarity is normal.
  Depending on the tab is the Hardware tab
  Hardware diagnostics check for I/O conflicts...
  Results: all the tests:
  EEPROM test
  FIFO test
  Test register
  Interruption of the tests
  Loopback test

  I also went in the prompt type in IPCONFIG... c which shows:
  Ethernet connection to the Local network card:
  ConnectionSpecific DNS suffix: (it's completely empty here)
  Link-local IPv6 address: fe80::bda9:951 d: 619f:a0dc 9%
  Autoconfiguration IPv4 address: 169.254.160.220
  Subnet mask: 255.255.0.0
  Default Gateway: 0.0.0.0

  I also have a sort of ping command here-cant remember the command, but the results were in the CBS... I didn't know how to reach. He however escape from something on the registry files.

  I went throughD-Link Tech router (router) support is good, Fios Tech support everything set up right, - Norton support(Norton denies that the files were not to be touched-although their report shows these registry files were deleted)-Dell Tech support because my warranty missed 3 weeks ago - although I still have the "your Tech Support team until 2013 - which is valid only if you have a hardware warranty-made no sense sold me the car without. the engine - directed the FTC to bring a complaint about it - after I get this fixed number.

  I hope someone can help... by the way I get perfectly in line with my laptop - I know this isn't my router. I'm sure it's due to some registry files being moved-(j'ai eu deles de messages d'erreur indiquant que les fichiers de Registre ont été endommagées ou manquantes) what do I do now? No system restore to restore this part of the register - I also installed the drivers from the dell drivers and Utilities disc - but maybe I've done that correctly? I put the disc - extract files-(he says they have been unpacked) was a new step for me to do after that? Help, please!
  Thank you!

  Hello
   
  We recommend that you install the router (see its manual) and the pilot of NIC once more and check the difference. In the first post, you mentioned that you decompressed or extracted files. Once the files are extracted, you will be asked to install the driver. However if you do not receive any prompts for the driver, then you will need to locate the destination folder where the files are checked to find the configuration file.
  
  Open the destination folder where the files are extracted and run the Setup file to complete the installation.
   
  To download and install the latest network card driver, visit the site Web of the manufacturer of the device or system.
   
  For more information on downloading and installing the drivers, visit this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/the-hunt-for-drivers-how-to-find-Windows-Vista-drivers-for-all-your-hardware
   
  I hope this helps.
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• How can I get WIndows8 TouchSmart to boot from the recovery disc

  How can I get WIndows8 TouchSmart to boot from the recovery disc? With the recovery in the drive disk when I do a reboot or stop and start it does not read anything from the DVD player. My computer is a HP TouchSmart 23-D160QD.

  @AirForce9731,

  You may need to change the boot order to boot from the DVD drive first.  The steps to do this are in the document below.

  http://support.HP.com/us-en/document/c00364979

  These are recovery disks made by the recovery discs sent by HP?  They will not work in a different system (you will receive an error message), but you are able to get the boot floppies in a different system?  They should be able to start up to a point where the error message will be displayed.

• was on a website and now cannot accrss now because I get a web page saying in the Application Server error ' / '.

  In the Application Server error ' / '.

  I was on a website and now can't accrss now because I get a web page saying in the Application Server error ' / '.

  Hello

  1 have had any changes made to the computer before the show?

  2. which antivirus software do you use?

  3. what Internet Explorer that you are using?

  Method 1:

  Try to disable add-ons in Internet Explorer 9 and check if it helps.

  How to manage add-ons in Internet Explorer 9

  http://Windows.Microsoft.com/en-us/Windows7/how-to-manage-add-ons-in-Internet-Explorer-9

  Method 2:

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213/no

  (Also applies to Internet Explorer 9)

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Hope this information is useful.

• Windows Media Player is unable to extract one or more tracks from the CD.

  I also got this message "Windows Media Player is unable to extract one or more tracks from the CD" pop up in an attempt to 'Copy' the CD!  I have Windows 7 and had NO problem for several weeks, ripping my music from CD sales in my MUSIC folder.  I got all "parameters" laid so that whenever I inserted a new CD he automatically pulled and then ejected.  I had NOT brought any changes to settings but for some reason all of a sudden it doesn't work anymore?

  I have trried restart, check all the parameters according to your advice making SURE that all the files of 'Target' were correct (they are), but all that happens is a few seconds after I insert a CD it gives me this message (Windows Media Player cannot extract one or more tracks from the CD.) and then the CD will eject with NO of TEAR that occur?  It's VERY frustrating!  There, can anyone help?  Please?  I have NO idea where to check then!

  Hi Jetlag40,
   
  Follow the steps mentioned in the reference link below and check if it works.
   
  http://social.answers.Microsoft.com/forums/en-us/w7music/thread/93c279f7-89ae-4a7c-B7EA-fdc7785ed335
  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.
   

• I have photoshopCC, but some how I get pop ups saying that my path for cs6 is expires, and then I buy and get a licience no, well I have not because I have a year of photoshop and lightroom CC. How can I get rid of this message from the trial please my

  I have photoshopCC, but some how I get pop ups saying that my path for cs6 is expires, and then I buy and get a licience no, well I have not because I have a year of photoshop and lightroom CC. How can I get rid of this message from the Marie trial please

  Go to Photoshop forum

• PHP form script is missing from the web server or PHP is not properly configured on your web hosting provider. Help - I get this message on my site when the form is filled out and you press send... Check if the form PHP script has been downloaded correctl

  PHP form script is missing from the web server or PHP is not properly configured on your web hosting provider. Help - I get this message on my site when the form is filled out and you press send... Check if the form PHP script has been downloaded correctly, contact your host about the configuration of PHP.

  Hi Graham,

  If you, please add your site to this link ( http://my-site.com/scripts/form_check.php ) and make sure that all green checkmarks are appearing. If they don't, let us know what errors you seem to receive and include the link to your site.

  In addition, check out this guide on the forums of Muse troubleshooting: Troubleshooting Muse form used on the servers of third party Widgets

  I hope this helps!

  Emily

• Unable to connect to the console BAM from the second server

  Hello
  
  I have 11.1.1.3.3 BAM, running with 2 managed servers (cluster). I created a user on the WLS console with the DefaultAuthenticator method.
  
  I associated the grid of BAM control this user as architect of the report.
  
  I can connect to OracleBAM applications on a server, but from the second server I get the error:
  
  BAM-00223: service oracle.bam.adc.common.core.IDataStore
  What it could be?
  
  TX

  You have configured the BAM cluster in active-passive mode. Given that the BAM server has not supported active active configuration.

  Looking at the error, it seems that the BAM Server attempts to start on the other node. Please follow the SOA HA to set up passive active BAM documentation.

  THX
  Ritesh

• Client DHCP fails to get a valid IP address when it is plugged in but it gets when it is connected to another

  I have Windows SBS2011 network with approximately 30 client PC. Suddenly six of the client PC (WIN7 Pro and 3 Windows XP Pro 3) is more valid IP addresses, they all receive the self addresses affected 169.254.x.x. If I give them static IP addresses and set the DNS server, they can connect to the server but have permissions issues when you try to access the drives on the server and they are unable to access the internet.

  However, if physically, I switch the PC to another office and link them to ports ethernet by the other office, then everything connects well, DHCP assigns the correct address and I can access the internet and the server.
  So I excluded the problem being the PC hardware, firewalls, client PC running DHCP, the server running DHCP properly - what can be? The ethernet port on the wall reminds somehow what is happening? Really, I'm stumped and would be grateful for any suggestion. Thank you

  What is your configuration?  Is there a router, power switches?   If so, try equipping these devices out of a minute and turn it back on and check.
  If this does not help, please describe you setup.

• Virtual machines do not get IP address from the DHCP server

  Hello! I just spend Xenserver to ESXi. Created a couple of virtual machines and none of them gets an IP address from our DHCP server (DHCP server is a physical PC), and instead, they get a number of internal 192.168.x.y allowing connection to the internet.

  Looks like a way to do this is to install a virtual machine that is a router, as M0n0wall, and route traffic to connect to the external network and finally to access internet. But this is not what I have to do.

  I need to have virtual machines that are server to get an IP reserved for our DHCP server, and then our local windows client should be able to access it directly.

  I searched on google and forums for this but I can't seem to find how to configure virtual machines to directly belong to our local network.

  I thought that VMware would have a simpler way to do so than XenServer, but I was stuck on this one day now and really frustrated as I get not before with this project, stuck on this little problem... sigh...

  Thanks for your help.

  GER.

  ESXi does not IP addresses to the virtual machines it host - if the virtual machines are not able to access your physical network than that of the thw two virtual machines acts as a DHCP server - now to the question of network - if you are not able to reach the virtual machines on the physical network or achieve fitness network virtual machines , then there is a problem with the physical connection to the ESXi host, possibly the configuration of the physical port that connects to the - is a way to test this theory to assign an IP address on the same network that the management port - if you are able to access the virtual machine, then you know that the problem is with the switch port.

• How can I get a valid ip address on my router

  my computer does not connect to my xbox wireless because it cannot find a valid ip address

  Hi Austin1234,

  ·         What operating system is installed on your computer?

  ·         Since when are you facing this problem?

  ·         What the exact error message you get when you try to connect the Xbox Wireless?

  I suggest you check out the links for more information below.

  http://support.Xbox.com/en-us/pages/Xbox-360/troubleshoot/KB/error-cant-connect-wireless-network.aspx?kbid=978945

  http://support.Xbox.com/en-us/pages/Xbox-360/how-to/Xbox-360-as-Media-Player/media.aspx

  http://www.Microsoft.com/windowsxp/mediacenter/Extender/Setup/ssviewer.mspx

• Unable to get Yahoo as homepage favorite in the Windows XP-based computer after you restore the computer to factory settings.

  Original title: setting up old user account.

  need help please, I use wndows xp service pack 3. This pc is shared with my wife as an account administrator. I come back from pc to the factory settings and all is ok for my account, send everything etc, but on his account, I am unable to get yahoo bt homepage favorite, I am able to do, it's dell page. any help would be appreciated.

  Thank you very much

  Pete

  Hi Pete,.

  1. you receive an error message when you try to change the homepage of Yahoo?

  2. what browser do you use?

  If you use Internet Explorer 7, you can follow this link & check if the problem persists.

  You can't change the home page in Internet Explorer 7

  
  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows.

  Hope the helps of information.
  Please post back and we do know.