Clients vpn AnyConnect and cisco using the same certificate
Can use the same certificate on the ASA client Anyconnect and cisco vpn ikev1-2?
John.
The certificate is to identify a user/machine rather than the Protocol, then Yes, generally 'yes' you can use the same certificate for SSL/IKEv1/IKEv2 connections.
What you need to take care of, it's that said certificate is fulliling Elements of the Protocol, for example implmentations IKEv2 is 'necessary' particular KU are defined and client-server-auth/auth EKU are defined on the certificates.
M.
Tags: Cisco Security
Similar Questions
-
Re: Satellite L735 PSK0CE: WLan and BT use the same frequency
Hello world
I reinstalled my Toshiba Satellite L735 - PSK0CE with Windows 7, until the one and download all the drivers for it, I did not too Wirelles conection, Lan and the wirelless use the same channell radiofrecuency than Bluetooth
Can you help me with this problem?
Thanks in advance
Post edited by: aku - aku
Hello
WiFi and BT use the same frequency. For the most part this isn't a big problem but in case you notice a few connection problems with WLan or BT, you must disable WLan using BT or must turn off BT if you want to use the WLan.
-
Hello, I'll soon change my computer, how to uninstall Lightroom 6 of the former and re - use the same license on the new?
Hi stefblub,
You can uninstall Lightroom from the control panel (Windows)
And for MAC: go to Applications folder > Ouvrezledossier Adobe Lightroom and double-click on uninstall Lightroom.
When on the new computer, download and install Lightroom from the following link: Download Photoshop Lightroom
Kind regards
Tanuj
-
How to cut a clip and export using the same file format
I use CS6 on a Windows 7 system. I have a MB 304, 8 HR record from a workshop that I put on recently and I would like to extract the different sections of the workshop in their own files.
Here's the info from the source file:
Type: MPEG Movie
File size: 304,0 MB
Image size: 1920 x 1080
Frame rate: 5.00
Audio Format: 16000 Hz - compressed - Mono
Project Audio Format: 32000 Hz - 32 bit floating point - Mono
Total duration: 07; 35; 20; 25
Pixel format: 1.0
My ideal solution is to delimit work areas that cover the section I want to extract and then export it to the target file by using the same parameters as the source file.
So far, the resulting files have been considerably larger than the source file, so I hope that there is a simple way that I'm missing.
THX!
So, can you go down to set rates manually? It's been a while since I used CS6, but I think that the option was there... and something you can do to help, is to say MediaInfo on your computer...
Media Info: https://mediaarea.net/en/MediaInfo
Drag & drop your clip on that, it will tell you the exact wrapper and the codec used, including the bitrates & such. You will know exactly what your current clip is this way. Build a preset to match.
Neil
-
Don't know what else I can give you here. This particular software function doesn't seem to work.
In case you use "clear history of Firefox closing:
- do not erase browsing history
- Tools > Options > privacy > Firefox will be: "Use the custom settings for history": [X] 'Clear history of Firefox closing' > settings
- https://support.Mozilla.org/KB/clear+recent+history
Note that compensation "Preferences of Site" clears all exceptions for cookies, images, windows pop up, installation of software and passwords.
You can check for problems with the sessionstore.js and sessionstore.bak files in the profile folder of Firefox that store session data.
Delete the sessionstore.js file possible sessionstore-# .js files with a number and sessionstore.bak in the Firefox profile folder.
- Help > troubleshooting information > profile directory: see file
- http://KB.mozillazine.org/Profile_folder_-_Firefox
Delete sessionstore.js will cause App Tabs and groups of tabs open and closed tabs (back) to get lost and you will have to re-create them (take note or bookmarks).
If you use a software like CCleaner cleaning then check the settings in the Firefox application.
-
The KDL-40VL160 and 46VL160 use the same basic position?
I bought some time ago the 40 that is is attached to a wall mount, but now need a piece of furniture. I found one on eBay, but there is also a stand for 46, which is significantly cheaper.
Thank you for coming back to us. The KDL40VL160 and the KDL46VL160 have different stands of table top. It would be preferable to use the support of table top which is recommended, or which is supplied with the KDL40VL160.
-
use the iMac and iPhone on the same account of individual apple music
I installed the apple music on my iMac, how I set up my individual account on my iPhone?
Make sure that your iPhone and iMac using the same Apple ID.
To check your computer, open iTunes then click on Store in the toolbar, and look at what ID Apple is connected to iTunes.
On your phone, got to settings > iTunes and AppStores > Connect (or type Apple, if this is not correct and sign out)
Similarly, go to settings > music > tick 'display Apple music '.
-
Hi, I am trying to download my Blurb photo book and it does not work. I use Lightroom4 and recently (and successfully) use the same picture in several other books. I get an error message that says that the photo cannot be returned. I don't know if it would work with the rest of the photos, because the one who gets the error message is only the third of about 40 images. I would appreciate all the advice really.
Thank you
Carly
As I said, I'm never comfortable with special characters like slash, and colon (exception is the underscore), although I have no direct evidence that there is a problem.
What happens if you rename the photo (using your operating system) to be lake_clouds2.jpg, and then she would have the question mark in LR 4 and you reconnect to the it in LR 4? Renders the picture then?
-
Using the same set processing on several site to site VPN tunnels
Hi all. I have a rather strange situation about site-to-site VPN tunnel.
On the one hand, I have a PIX 501 and on the other end an ASA5505 and a tunnel set up between them.
The problem is that on the side of the PIX, I can't establish a tunnel, but when the traffic starts on the side of the ASA the tunnel established as usual.
I checked the configurations on both ends and keys, passwords, mirror that LCD seems OK. The only thing that comes to my attention, it's that I have the same set of transformation used for 2 different tunnel on the side of PIX.
Can I use the same set of transformation on several tunnels or should I set a different transformation for each tunnel? Could be the source of the problem?
Use it on PIX
card crypto set pfs group2
Or on ASA, use:
card crypto set pfs Group1
-
Hello world
How can buy you an IBook of UK not available in Indian store a store; When you change the status of your country, your billing information and credit cards won't work; is there a solution for this using the same method of billing
There is no solution, if it is not available in your area, you can't buy it.
-
I know that I can move my TB profile location and create new ones using Profile Manager. I did it using my account Onedrive and TB works very well. It would be very useful to be able to use the same profile Onedrive of two PC, but is it possible and how can I do? Thank you very much.
It is possible, but prone to failure.
You can not at the same time share a profile
The network speed is essential. Portable Thunderbird and a USB would be a better solution. -
Satellite M30X-122: how to use the headphones and speaker at the same time?
Hello
y at - it a possiblity to use headphones and speaker at the same time?
When I plug the headphones into the Jack, the speaker is created off the coast of the moment.Thank you
PeterHi Peter,.
There is unfortunately no way to use both headphones and speakers at the same time. This is because tghere's a disconnection physical power for the internal speakers when you plug in the headphones. It is not by software. The only way around this would be to dismantle the headphones Jack and solder connections that are broken when you insert the headphone permanently.
Kind regards
-
Satellite Pro L770 - 14 H - the use of WLan and Bluetooth at the same time
I have a Satellite Pro L770 - 14H and you want to use a Bluetooth mouse.
With the 'FN' and F8 key I am capable of coding between WLAN and Bluetooth, but it is not possibel to have both at the same time.My question is: How can I have WLAN and Bluetooth at the same time?
To use a Bluetooth mouse with WLAN connection.Thank you very much
HelmutHello
Using Win 8.1?
Usually you could turn on and off Bluetooth in Win 8.1
Settings PC-> PC &-> of Bluetooth devicesThere, you can move the cursor to BT for THE position.
-
Is it possible to use iCloud shares photos with the two opening and Photos at the same time?
Is it possible to use iCloud shares photos with the two opening and Photos at the same time?
Non - PEAK is not a feature of iPhoto or Aperture - this is new with Photos
LN
-
We have 2 phones and 2 computers and they all sound when the phone rings. How to change that? they all use the same apple - ID we buy apps and music coming from the same account. It all works very well, but we don t like any other device to RING eveytime a phone rings.
Thank you so much: D
ON both phones, check the settings > phone > call on other devices > Off.
Maybe you are looking for
-
Since the update to iTunes 12.4.1.6 I don't see my purchased music. When I try to import my old playlists I get a message saying that the library is not a valid iTunes library. Thus, thousands of songs and hundreds of films and I can't see or play on
-
How can I recover my Qosmio G20-118 without loss of data?
Hello I need to recover my system but have a lot of data in my HDD D: I want to keep.In this forum, Gipsyman said that I should be able to use the dvd recovery disk by selecting the advanced recovery mode, but there are a lot of options and I have no
-
SUSE Linux 10.1 on M50 - 216 Live
Hello Sorry for the lousy title, I couldn't think how it better word. Anyway, I'm trying to boot Suse Linux 10.1 Live on my laptop, it starts Suse very well at the beginning but after selecting Gnome or KDE, the boot stops, saying that it cannot find
-
VISA lib parallel query the former instrument 488
I looked around to see if there is an answer for this, but I can't seem to find. I want to use the VISA library to communicate with an Amplitude of Phase Scientific Atlanta 1780 receiver, and I need to be able to read the status byte parallel survey
-
How to export and print a specific group of contacts in Windows Live Mail
Original title: list of Contacts in the Contact GroupI use Vista with Windows Mail, and I want to create a Word Doc that lists the names and addresses of a specific group of Contact in my list of email Contacts. I tried to copy and paste, but it does