Clip + microSDHC detected not HELP!

just bought clip + 2 GB 1 week ago. but useless 8 GB microSDHC. Sometimes the "flower" logo stuck sansa. sometimes blocked to "refreshing media." sometimes can load the player, but not content in the map.

so I tried with a different microSD 2 GB, it's good.  I try to find solutions in the SanDisk forum, but nothing helped. I already formatted with windows 7. but cannot use cause SD Formatter, it says that the map is not supported (?). the 8 GB card can be used with my phone.

I checked the 8 GB card with "h2testw"... It is ok

then HOW? I think that sansa clip + got a lot of problems... If I discovered before, sure, do not buy it... = _ =

I discovered many users clip + you have this problem w / microSD

any way, any help or suggestion will be such wonderful service from SanDisk gurus.

SOLVED. Rockboxed it. now it can use microsd 8 gb. Wee ~.

ROCKBOX ROCKS!

Tags: SanDisk Sansa

Similar Questions

  • I get the following message appears when you try to open Photoshop... "Could not initialize Photoshop because an of.file - unexpected end has been detected. Help! You can use my Photoshop!

    I get the following message appears when you try to open Photoshop... "Could not initialize Photoshop because an of.file - unexpected end has been detected. Help! You can use my Photoshop!

    Hi romyb,

    End of file unexpected refer and let us know if this helps.

    Kind regards

    Assani

  • Popup declared attempt to access Firefox; clocked to 'block '. now can not access ALL Web sites; update did not help; What's wrong??

    Reported popup web site tries to access Firefox (don't remember exact message); available buttons: allow once, allow, block; has chosen the block (I selected allow once before, but that seemed to be a bad idea). After that, I get "Unable to connect" no matter where I go. You had to use IE to join of Mozilla.org. Firefox update did not help. Troubleshooting procedure did not help.

    Hello, this looks like a problem with your security/firewall software blocking the new versions of firefox. If please delete all the rules of the program for firefox to your firewall and let it detect the new version of the browser again.

    Difficulty of problems connecting to websites after Firefox update

  • iMovie imported my clips but did not convert the

    Hi all.

    Recently, I imported a whole bunch of my GoPro clips in iMovie. They seemed imported ok, but when I drag them from the event in the project and then decide I want to make adjustments of speed in clip adjustments, it is said that the clip was not converted - see attached screenshot.

    In addition, displaying some of the clips, some of them do not see smooth, the video will be trolling heavily but audio will continue. This will be resolved once that I convert the clip but it's a bit frustrating when I have to drag the item from the window of the event in the project window and then convert it just to see if I want to use it or not.

    The clips can be converted singularly but takes a while. I was wondering if there was a way to conversion in bulk the clips so that I could just let it run all night and she'll do all clips at once. I have searched through the toolbars, but found nothing. It is mostly just then preview or watch clips or if I want to make adjustments of speed/run the clip towards reverse.

    I made a video in iMovie earlier in the year with images of the GoPro (from the GoPro even) and had no problems with the conversion of import or clip.

    Any help anyone could give me would be much appreciated.

    PS if possible, I don't want to reimport them since I already moved half the clips I want in my project.

    Additional information:

    Computer: MacBook Pro 13 ", about six years, running the Version OS X El Capitan 10.11.4

    version of iMovie: iMovie ' 09, version 8.0.6 (821)

    GoPro used: GoPro Hero4 Silver

    I made a video in iMovie earlier in the year with images of the GoPro (from the GoPro even) and had no problems with the conversion of import or clip.

    Were then automatically using El Capitan, or a previous operating system?

    There are many reports on these forums that suggest that worm iMovie 8 and 9 are not compatible with El Capitan.OK on previous operating systems

    Even if you convert the clips there may be other issues.

    The recommendation, if you have problems with the 8 CBS NVA, is to download iMovie ver 10 from the App Store.

    It is not free for users of version 8 it is for users of version 9.

    Version 10 is quite different from 8 and 9 so a bit of a learning curve.

    Do a search here for compatibility with El Capitan iMovie for more information and look for entries of GeeD is the current master

    for iMovie 10 and how to get your events and projects in iMovie 8/9 to iMovie 10.

  • all the site went "not found HTTP 404 error. The requested resource is not found. "and the"Firefox cannot load Web sites but other programs can"page is not helping

    all the site went "not found HTTP 404 error. The requested resource is not found. "and the"Firefox cannot load Web sites but other programs can"page is not help somehow

    One possible cause is security software (firewall, antivirus) that prevents or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

    Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

    See:

    You can try to reset (power off / on) of the router.

  • Skype can't detect not webcam. Once again.

    So, I had this problem some time ago and downgrading to an older version of Skype to be fixed.

    Now, however, I was forced to upgrade to the latest version of Skype again because it would link is no longer with the older version and ust as before he refuses to admit that I have a webcam.

    Using windows 7
    Latest version of Skype
    Updated drivers
    USB 2.0 UVC 1 M webam (built in)

    You have several virtual Capture video applications, which all can conflict with the latest versions of Skype and prevent the detection of the physical webcam.

    One that is known to cause problems is ASUS Virtual Camera application (http://community.skype.com/t5/Windows-desktop-client/Unable-to-detect-webcam/m-p/3629083#M299779). Uninstall this application. I don't know if this is the case with the application less known of FFsplit/FFsource (http://www.ffsplit.com/) , but the removal of this application may be necessary too. ManyCam, depending on the version, can cause problems also.

    If the uninstallation of applications of virtual video capture will not help, then uninstall the currently installed version of Skype and install the 6.14.104 version by using the download links provided here:

    http://community.Skype.com/T5/Windows-desktop-client/ASUS-USB2-0-webcam-not-recognized-by-Skype-6-18...

    Be sure to turn off the automatic updates.

    Tools-> Options-> Advanced-> automatic updates-> turn off automatic updates

  • My mouse no longer works 2 days ago... I restored my pc on the eve, it works... but that did not help my mouse. This mouse works on another pc... I am getting error usb? I removed & charged all under the usb tab__

    My mouse no longer works 2 days ago... I restored my pc on the eve, it works... but that did not help my mouse.   This mouse works on another pc... I am getting error usb?  I removed & charged all the usb tab

    Hello

    You may need assistance from a real store tech computer (no leeks and glances at a BestBuy or)
    other BigBox stores) or the manufacturer of your system Support.

    What is the error of USB?

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
    program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -----------------------------------------------

    Please make these now even though you might have tried this before:

    Remove the mouse if indicated in the Manager of devices - devices of score - click right on - UNINSTALL.

    Then lets refresh the USB stack

    Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
    UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

    This KB shows XP how to and the method of Vista is identical
    http://support.Microsoft.com/kb/310575

    ----------------------------------------------

    If necessary try these two:

    Tips for solving problems of USB devices - and a Mr Fixit
    http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

    Hardware devices not detected or not working - Mr. Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Reloading the blackBerry Z10 Z10 software stuck on logo Blackberry, continuous restart loop, did not help...

    Hello

    Here to find the solution for my beloved BlackBerry Z10 STL100-3

    One day, precisely 26 May 2016 my Z10 battery Blackberry went below 5% or something, I rushed to connect it to the charger but before doing so; It is just off. I plugged in the charger for several hours, but it went to reboot mode as he went to the course passed. It just kept flashing empty battery symbol.

    Problem: BlackBerry Z30 stuck in a reboot loop

    Comments/Details:

    1. when it is connected to the wall charger, the red LED flashes for a few seconds, the display shows "BlackBerry" name. After that,.

    a. device either goes to a restart mode, the icon reload Blackberry OS, the charging progress are shown and about 60-70% progresses he new go to the mode (flashing empty charging symbol) load

    b. or device is standing right in the mode, load with screen showing beteer empty, load, seeing to the top flashes still with the typical color of LED for empty-drained/low battery levels.

    2. keep on charging for several hours, or even overnight will not help to restart. And he remains in charge mode with b symptoms of "scenario". Start button / stop fails to start the machine and after several attempts, it flashes only 'Blackberry' on screen and again charge mode.

    3. as soon as the connection to BlackBerry device link gets detected for a few seconds. And the screen displays the name of "Blackberry", "scenario one" described above occurs. And he just repeats.

    4. that the device is detected for a few seconds, being fast enough to select the option "Reload" when Blackberry link shows that it connected returns with the message "software update has encountered an error.

    After meeting thiis reboot loops question on 26 May 2016, I searched rigorously blackbery support forums and other web pages a di a factory reset/software reload on my device. I lost all my data, but did not care as I wanted my Z10 back to life.

    Now its been 2-3 months I see my Z10 stuck in restart loop and hoping that maybe it lights up or I will be able to find the solution.

    Kindly help.

    Hi J Sanders,

    Z10 was connected to the wall charger and all the tips/advice you mentioned have been tried. He could not start device.

    Before trying the ADF, to check if battery is dead or defective; I kept it in my brother Z10. The battery was load and after a while, he turn the unit on its own.

    However, the pile of work of Z10 my brother could not initialize my camera. I guessed corrupted software connection or the battery could be a problem.

    I carefully observed battery connection ports, specifically the part that establishes the conncetion of metal tabs of the battery with the unit (given in the image http://www.gsmzone.co.uk/Blackberry-8900-Z10-Battery-Connector).

    I found one of the metal connector stuck / out partially / fits loosely / spring-movement irregulars / and is not able to communicate perfectly with the metal strips of the battery.

    I tried to solve this problem by manually removing the metal connector. After several test, I managed to do it.

    I put my battery in my Z10, he acknowledged, and red LED flashed, name BlackBerry flashed, Blakberry OS Reload icon flashed-has increased 100%, Blackberry 10 name flashed and Z10 began. Device came to operational status.

    Current operating system version is 10.3.2.2836.

    No SIM or media inserted in it.

    Charge the unit and check if all functions work fine.

  • 64-bit Windows 7 Media Center does not detect not tv tuner

    Hello

    Windows Media Center is not able to detect my usb hybrid tv tuner in trying to set up live TV. When you try to solve any problems are detected, I downloaded the latest drivers and install and the device is listed as working properly in Device Manager.
    It is a kworld atsc usb hybrid tv stick ub445-u
    I am at a loss on what to do because there are several product reviews that say the tv tuner works very well with windows 7 with no hiccups...
    Any help or steps would be appreciated!
    Update
    Everything uninstalled and reinstalled media library but her has not helped either

    KWorld hybrid TV Stick UB445-U USB 2.0 is a Windows 7 Media Center compatible tv tuner card, and there is no need to install any third-party application.

    You can create a different user account with admin rights to check the issue.

    http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=KWorld%20UB445-U%20Hybrid%20Tuner%20Stick%20USB%20TV%20Tuner%20Card&v=KWorld&uid=UB445-U&l=en-US&pf=1&pi=9&c=TV%20Devices&sc=TV%20Tuners&os=64-bit

  • Audio clips of some clips plays do not, while others play very well. Photo included.

    If for some reason, while I was working on my project, suddenly the audio playing back fine stopped playing sound back.

    After trying to solve this problem (reset the caches, import audio, restart the computer) I'm here asking for help.

    After an hour of banging my head and google search, I noticed that the clips suddenly not work had a different color to them.

    On the left is the clips on the right and work no job clips.


    Could be the problem?

    Thank you.

    Data sheet:

    CS 6

    MacBook Pro

    10.8.4 OSX

    8 GB ram

    The audio files are .wav.

    Screen Shot 2013-08-16 at 9.00.16 PM.png

    Hello

    Thanks for posting on the forums. Please right click on audio clips that do not have sound and go to option channels Audio and in the channels of the Source tab select left and right respectively in the drop-down list. This issue may arise if you there is "none" option selected in the source of the string tab. Please update if this solves your problem or not.

    Thank you

    Vinay

  • Browser is stuck in mode full screen, restart does not help.

    I entered the mode full screen on a website and now cannot get out. Restarting my computer does not help. Problem is that when you are using Firefox, no other browsers. Firefox continues to open full screen mode whenever I open it, and I have to reboot in order to use another browser.

    Try to rename (or delete) the file xulstore.json in the Firefox profile folder.

    You can use this button to go to the Firefox profile folder currently in use:

  • Thunderbird won't open on a local folder. No other window, no access to the accounts. Reinstall does not help.

    I have 4 accounts and about 30 local folders. Thunderbird is stuck with an open local folder. Cannot access any other page, or all accounts. Reinstall does not help, or don't restart the computer. I have Thunderbird 31.5.0 on Yosemite 10.10.2.

    Turn your folders pane. Component presentation-file to display if you are using the menu bar.

    If you use the AppMenu button it is button AppMenu
    Hover over the Options
    Component layout page-folder

  • Print Help does not help me open downloads on my android

    Cannot retrieve or open downloads. Printed text does not help because I can't find the button

    You are able to use the menu in Firefox for Android? On some devices, a stack of 3 points appears at the right end of the address bar to display the menu, while on other devices, there is a button to (touch capacitive) of 'material' to the camera button at the home to show the menus.

    In the menu, you should find under Tools downloads.

    In addition, by default, Firefox uses the download system folder, so if you open the download application that comes with your device you should find them there (in general).

    A little luck?

  • Some Web sites load on my laptop as a mobile device sites... I tried to reinstall FF, but it did not help... What is happening?

    Firefox - version 33.0.2
    -System of operating Windows 7 Home premium

    -Some sites (not all) has recently begun to load on my laptop as a mobile device URL. It doesn't matter if I followed a bookmark or I type in the URL. But ONLY on a laptop (HP Pavilion I bought new in 2013), I tried the same sites on my ASUS netbook and they charged normal). An example is the Washington Post's news site. It does not make a difference if I allow or block cookies.

    -Uninstalled and reinstalled Firefox (made sure the profile folder has been removed and replaced). It did not help.

    -Antivirus does not pick up anything.

    -Is a browser problem or something else? I would appreciate any advice. Thank you!

    I tried the zoom on the browser, but it wasn't problem. Looks like the problem is that I used the windows "displays" option to set the size of the text to 150%. When I put it to 125%, the site loads normally now.

    Thank you for helping me to understand!

  • My Hotmail watcher has stopped working since last week. I uninstalled and reinstalled several times different, but it did not help

    My Hotmail watcher has stopped working since last week. I uninstalled and reinstalled several times different, but it did not help

    Sorry, I should have told you how to install it.

    • Click on the orange button Firefox > Modules > Extensions > click the settings next to the bar (screwdriver and key intercroisées) search, click install the module file them find the file that you downloaded and it open it. It should bring up a box that says install now. Do so if she asks you to restart Firefox, do.

Maybe you are looking for

  • Update iPhone to iOS 10 5s

    The option ID Touch still works to unlock your phone on the 5s?  I read that the 5 and 5 c will not allow you enable this option, but are different 5s?  I use the service frequently, and I'm not sure I want to upgrade if this feature is not available

  • Remove options for sites to add to the search bar

    How the little green plus can prevent appering in my search bar? I don't want to anythin other than Google. Since the last update, it is not possible to double click previous text in the search in any bar. It's super annoying, when you double-click t

  • AppleScript find and pass variables with a single value for the new string

    Hello again, I need a solution to do this: We have the string {0, 0, '62 21 37', 1, 0, ' 62 21 37 ", 2, 0," 108 50 56 ", 3, 0," 167 102 95 ", 4, 0, ' 108 50 56", 5, 0, "145 84 83", 6, 0, "109 50 58", 7, 0, "109 50 58", 8, 0, "129 62 66", 9, 0, "120 5

  • Jelly Bean 4.2 update now Firefox closes constantly

    My Nexus 7 has just made a Jelly Bean 4.2 update now whenever I use Firs Fox randomly, it closes the browser after only a short time, sometimes as short as 5 seconds, after that it closes it comes to the home screen for my device.

  • I need drivers to install Win7 64 bit on mSATA SSD

    Hello! I need drivers to install WIN7 x 64 on THNSNH256GMCT mSATA SSD Serial number on my product is 23NS10BFTABY Thank you!