Clip more malfunction

Similar Questions

• new sansa clip more 8 GB not detected but charge

  I got a sansa clip more 8 GB as a gift. new but old stock. everything works fine. except this is not detected by the pc. It will load.  I installed the drive, but I think that it isn't installed rhapsody. can I completely ignore the part of the Rhapsody? total newbie to mp3 sansa. I'm using windows media player 11, vista ultimate 64-bit version

  Miikerman wrote:
  As ends in General, no matter what Generic USB cable with straight plug should be fine with your drive. My hunch is that there may be some problems with the USB cable you have tried (something that you might want to check, by the way). Sometimes I use the USB cable that came with my Clips, sometimes I use one of my many generic not cheap-o cables; six of one and half a dozen of others - they all work very well.

  There is there the cables that don't transfer data, only the fee...

• Memory 01.02.15 firmware support clip more?

  Hi, I'd like ask what kind of a maximum capacity of microSD memory that can be used in the 01.02.15 firmware? My most Clip was downgrade to version 01.02.15 (version 01.02.17) yesterday, after restart and scan... it can't read my database of songs to memory (Toshiba micro SDHC 8 GB, class 4). Am I missing something here? THX.

  There is no difference in the care of memory - 32GB.  8 GB should be no problem.  Have you tried the card in something else that can read?

  And just curious, but why the downgrade? And did you get the firmware on the SanDisk site?

• Memory contents internal clip + more not viewable in Powerdesk

  Hello

  I fully charged my internal memory 8 GB with music a couple of months.  Today when I joined the Clip you want to add a song to my external card, I couldn't view the contents of my internal card at all.  Indeed, Windows XP does not find my card at all until I put USB Meteorological Service of the Canada, as it is said in my getting started guide.  I was able to view the content of the external card but not the content of the internal card.  I tried to copy something in the internal memory and Windows said the card was full, but I don't see anything.

  Anyone has any ideas, what happens?  When I look in the folders on the Clip mode, I can see the elements are still there on the internal memory and play the songs.

  Thank you.

  Christie wrote:

  Hello

  I fully charged my internal memory 8 GB with music a couple of months.  Today when I joined the Clip you want to add a song to my external card, I couldn't view the contents of my internal card at all.  Indeed, Windows XP does not find my card at all until I put USB Meteorological Service of the Canada, as it is said in my getting started guide.  I was able to view the content of the external card but not the content of the internal card.  I tried to copy something in the internal memory and Windows said the card was full, but I don't see anything.

  Anyone has any ideas, what happens?  When I look in the folders on the Clip mode, I can see the elements are still there on the internal memory and play the songs.

  Thank you.

  This mode was the player when the songs on internal memory have been added? Your computer can only see files added when logged into the same USB mode the way in which they have been transferred to the unit in the 1st place.

• After the clip in the timeline, there is no audio track of the clip more

  Hi, I check a clip in the preview window, cultures and put it in the timeline. Then, the audio went. I realized that the problem occurs after having successfully placed a clip in the timeline panel, the second is still without audio... Checked twice after restarting the program. This issue occurs after the last update...

  

• IPhoto to my Macbook Pro doesn't let me play video clips (usually taken with iPhone). I get a message: "Error OSStatus-54."  Anyone know how to fix this? Thank you!

  IPhoto to my Macbook Pro (old version) won't let me play the video clips more (it was). They are mostly of clips to iPhone. When I try to open them I get a dark white page with an error message:

  "Error OSStatus-54".

  Someone has seen this and someone has suggestions on how to fix it?

  It's so frustrating because with most of these clips, that is the only place where I stored them - some clips I get from family members as well... (In iPhoto, I see a picture of the first frame of the clip, but the clip does not play). Even when the new version of iPhoto appeared on my computer, my old version slept and I continued to use the old because I liked it is better (more familiar).  The videos were still on the old version when I got the new version, but they stopped play several months ago. Help! Please? Thank you!

  What version of iPhoto? The operating system?

• Play the Sansa Clip, and small stereo room

  I just got my Clip more today.  One of the things I wanted to really be able to do was play through the small stereo I have in my room.  I did a little research before you buy the video and found that what I had to do was to buy a cord that had the stereo mini plug plug at one end and two RCA plugs at the other end.

  I connected the Clip on my stereo in this way, ensuring that choose "line in" the energy input to the system, but in this stereo which, otherwise, has more volume I have ever NEEDED, I hear just whats playing in the Clip, even with the volume on the stereo completely maxed out and the choice of 'stronger' selected on in the clip.

  Any ideas?

  RandyMyers wrote:

  I just got my Clip more today.  One of the things I wanted to really be able to do was play through the small stereo I have in my room.  I did a little research before you buy the video and found that what I had to do was to buy a cord that had the stereo mini plug plug at one end and two RCA plugs at the other end.

  I connected the Clip on my stereo in this way, ensuring that choose "line in" the energy input to the system, but in this stereo which, otherwise, has more volume I have ever NEEDED, I hear just whats playing in the Clip, even with the volume on the stereo completely maxed out and the choice of 'stronger' selected on in the clip.

  Any ideas?

  The volume on the side of the clip must be turned up all the way, and the EQUALIZATION left on 'Normal' for a better result... but make sure that you turn the volume on your stereo first before you press play.

• Low volume compared to my original Video Clip

  I just got my new 8 GB Clip more this week after using my original 2 GB Clip for 2 years and love it. Unfortunately, I noticed that the volume of the Clip Plus is a little lower than my video. I have done all the stuff with the control panel and the region (tried in North America and rest of the world, put the volume on 'High' setting) but is still not as strong as my old Clip. And forget the 'Normal' setting, it's just laughable how low that is. But if anyone has noticed this difference in volume between the old Clip and the Clip Plus? Is there a way to make it as strong as the old Clip most Clip? Thank you.

  IIRC the volume reduction was changed in an update firmware for the Clip V1. If I play my V1 Clip with firmware.18 50% in volume, it is about equal to my V1 Clip with firmware.35 to 75% of the volume. The volume of 100% full power even sounds good. I think that the scale has been changed for lower volume at least for sensitive IEMs who played too strong with smaller settings. I also believe that the balance of volume Clip + is equal or very close to the version of the software to scale in the Clip V1 and V2.

• Y at - he liked an update firmware for the sansa clip

  If I use the sansa updater it detects it as a normal element and gives me a firmware to install, one that ends in 32 I think, but if I install what I think ill ruin the clip, so I ask if a firmware update for the clip more were released, I got V01.01.05A firmware now

  No update firmware at the moment; you have the most recent.  If/when an update of the issues, it is likely is displayed as a sticky thread at the top of this forum.

• clip + and unsupported card formats

  I thought do a clip more.  If I put in a card that has the music, photos and videos of my rocket in the clip, is it get stuck on the updating of the database?  Or it will freeze if I put it on play together?

  mags1230 wrote:

  I thought do a clip more.  If I put in a card that has the music, photos and videos of my rocket in the clip, is it get stuck on the updating of the database?  Or it will freeze if I put it on play together?

  I think I understand what you're getting.  I've only experienced and the presence of pictures and videos on the microSD card does not interfere with the database or its refreshing - the photos and the video just get ignored by the database (and do not appear in the folder view, either).  And then the Clip + play without freezing.

• No audio track appears when I drag the clip to the timeline.

  Hi, this problem has just. When I try to put a video file in the timeline, only the video portion appears. I tried different types of video file, and the result is the same. I still have PP CS4 and experimented with the same movie files, and it works perfectly. This is probably a simple solution, but I've exhausted all my ideas. Help, please! I'm under PP CC. Thanks in advance.

  See here:

  FAQ: Why no audio or video will not at the track where I let down?

  After the clip in the timeline, there is no audio track of the clip more

• Clip motion no longer works

  Hello everyone!

  I have this strange question that the movement of the clamp no longer works. In fact, when I click on the clip I can always resize but when I go in the effect controls panel and click on ' Video Effects/Motion ', all of a sudden, I can't animate the clip more! I always get the 'circle of target with the small arrow on the inside", but when I try to drag the clip, he's stuck! I deleted and reinstalled the program, but still nothing!
  Has anyone had this problem and solved, please?
  Thanks in advance!
  Jijital

  I got it!
  I did not follow the correct procedure, from the beginning of the clip comes alive.

  Thanks anyway!

• When you move the timeline indicator - it deselects selected clips previously (to add fx for example) in cc2015 - why?

  Hey everybody, I would be grateful is someone could answer this for me:

  When I selected more clips to add fx for them - and try to move the timeline indicator to see if I left out the clips more, as soon as it comes to a previously deselected clip - all my selections disappear.

  It could be related to the fact that each clip gets selected when I scroll up and down the timeline without doing me anything. (No need to click on the clip so that it can be selected).

  Please someone make me know what I am doing wrong or what setting I accidentally put under tension! I want that this party

  Thank you!!!

  Uncheck the selection follows the playhead to the title sequence.

• Refine clip in first pro don't synch

  Hello!

  So, here's the thing. I am using Premiere Clip to make an easy cut on my Tablet (iPad 2 Air), but I want to send to the first to refine the cut with Premiere Pro.
  As announced here: refining a first video Clip in Premiere Pro | Adobe Creative cloud Mobile Apps tutorials

  However...

  I'm sitting here with a test project to try to do exactly that. I have a title and I have a next clip (taken from the cloud creative already), then another title.

  -J' I try to send my file to first pressing: "Edit in Premiere Pro.

  -Only the answer I get is: "could not send the project. Impossible to send this creative project cloud because some of your media is always synchronize. Please try again in a few minutes. »

  Now, go to error messages, this one is pretty good. Explains the problem and told me to wait. So I wait... However, I also note icon loading at the top left.

  So, I have this button to see the current download media. Now at 150%... Only to 199% and then back to 0% and start all over (it tries to download the file already taken compared to the Creative clouds).

  This has happened for the past 2 hours.

  1: what a firewall issue?
  2: is this a bug?
  3: why it wont update?

  All tips/hints would be more than welcome.

  The project includes the clips with a duration of about 4-8 minutes? It is the length of the source element , not the duration of stand by occurrences of the element in your timeline.

  If your project contains excerpts from this size, then you almost certainly hit a known issue with clips about 500 MB to 1 GB, a signature which is that the status of the Synchronization dialog box reports download reaches 100%, then resets to 0% and amounts to 200%. In some cases, download completes successfully after reaching 200%, but sometimes it just resets to 0% again.

  We are working on a fix for this problem. In the meantime, I'm afraid there is no work around - at least not for the existing clips that are greater than about 500GB. For future projects, you can follow this issue by keeping your clips in less than 4 minutes.

  For what is a workaround for your immediate goal to launch the Premiere Pro project, the following should work:

  1. Delete the project clips that come from a file of more than 500GB. To facilitate the re - insert a clips in Premiere Pro, you can insert a title in its place with enough information to remind you of what clip go.
  2. Once the synchronization has completed, will publish > edit in Premiere Pro
  3. Use the creative cloud (or some other cloud storage service or Dropbox) to get the large clip from your mobile device, the computer that is running Premiere Pro
  4. In Premiere Pro, open the Adobe video project, import the large clip and add it to the timeline.

  Of course, it is an option if your project also includes other assets that are less than about 500 MB...

  Let us know if your project does not contain clips more than 500 GB. In this case, we will have to continue the investigation to determine what is going wrong in your case.

  Sorry for the inconvenience.

• Several track Select tool - deselect a clip

  On a Mac, I use the Selection tool to track with the SHIFT key to select multiple tracks at one time. It keeps selecting a clip more I want. How to deselect this clip and keep the other?

  You can just switch to the tool selection and then SHIFT on the tracks you want to deselect.

  Alternatively, you can use just the selection tool to drag a window through the clips/multitrack you want to select. However, you start to drag the selection window in the empty space before the the track otherwise you'll just simply move a clip.

  -Pete