clip on the slot PCIe of Presario SR1913WM?

Similar Questions

• Location of the Mini PCI Slot on Satellite P10

  Hi - I have a portable series of P10, PSP10E-0RCJM-EN.

  It is initially provided without an internal WIFI card but a swith and LED indicator.

  I hope to fit a suitable Mini PCI card.

  I am likely to find that an antenna is already installed?

  That more can someone guide me as to where is the slot mini pci and how to access it please?

  I read the previous posts about the contacts of masking/insulation on the card wifi on this and other forums, so I'm ready for this problem when I get there.

  I hope you can help, impatience of someone soon!

  Graham

  Hello

  The wireless network card is an option on this unit. It is possible to switch this unit with the WLan card. The WiFi antenna should already be included in the specifications.
  The WLan pci slot, you will find at the bottom of the unit.
  It s close to the slot of the modem.
  However, I would recommend consultation with the user manual. There you should find more details.

• Satellite Pro M10 - location of the mini-pci slot?

  Hello

  I have a M10 Pro of the Satellite with a mini-PCI Intel Pro 2100. Now, I wanted to put in a new card, but I can't find the mini-pci slot? I opened all the way down, but there nothing. Where is it located and what is the best way to open the laptop? I guess a lot of screws must come out...

  Hello

  Well, as far as I know the mini-PCI card is under the keyboard. In this case, you will need to remove the unit covers. But if you open Notepad, you will lose the warranty.
  In my opinion, you should contact the ASP for help and detailed descriptions.

  Good bye

• Which of the three pcie slots is Gen 2.0?

  My elite 9300z used motherboard Μatx-RS880-H and the specs page says he has 3 expansion slots: PCI Express x 16;  PCI Express Gen 2.0; and PCI Express x 1 socket minicards. Two of these slots are already occupied.  How will I know if the available pcie slot is Gen 2.0?  I want to install a 4-port USB 3.0 pci card.

  Here are the specs of your motherboard:

  http://support.HP.com/us-en/document/c01925486

  Looks like the SATA news are messed up. You have 3 x 1 and 1 x 16 slot. They are all 2.0 by the spec. I let someone know here as the page is messed up. Thanks for bringing it to my attention.

• HP pavilion p6754y: is the slot on my motherboard 1.0 or 2.0 pci

  Hello

  I searched many forums/Device Manager and you can't get a solid answer on whether or not my pci port is a 1.0 or 2.0, I'll replace my current video adapter with one that is 3.0 and I'm not sure whether or not to upgrade the mb with the gc. And if my current pci slot is 1.0, even it would be necessary to upgrade for the 3.0 gc?

  Thank you

  Statik, welcome to the forum.

  This is the page for Specifications of the motherboard of the computer.  She says she has "1 PCI Express x 16 slot speed Gen 2.  You can use a PCI Express 3.0 x 16 into the slot of the Gen 2.  They are backward compatible.

  You need to upgrade the power supply (PSU), also.  The current PSU is only 250W.  Most new mid-level video cards require at least 400W to work properly.  The last problem is, the new cards (EVGA 700 series for example) require UEFI in the motherboard instead of a standard BIOS.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Is there anything I can change/device manager/cmd Vista for my job wireless in the slot 2 PCI?

  System:
  E Machine T5086
  Vista Home Premium 32 bit SP2
  Intel Pentium 4 3 GHz
  2gigs RAM
  MOBO: 4006173RIntel (Coryville 2) 945G Motherboard
  Wireless card: Hawking HWPG1 device name of PCI card wireless 802.11 g: Ralink RT61 Turbo Wireless LAN Card

  Background:
  I recently installed a PCI-E ATI Radeon HD4650 gfx 1gig card. Unfortunately, with the fan attached, it's a bit too thick to sit safely far from my wireless card that is located in the upper part of the PCI slot. So, I took and it goes down a slot. (I have only 2 pci slots, a pci-e). The card is recognized, the drivers are installed, it is part of the work, there is no conflict, no exclamation, nothing in Device Manager. However, the internet does not work, and he recorded as "disconnected" or "disabled" in the network and sharing Center. So, when I look for to connect to networks, none never appear. I have other computers in the House. Wireless works fine on all others, showing our fine network. The card worked previously above the slot without any problems and always done if I put it back in there. -I don't understand the pci card is a little old, however, the way it has worked well in the first period, I don't want to buy a new wireless card, only to have it also not work in slot 2. It is very possible, there just a problem with this slot, not sure how determine that. Looking for a Windows hotfix.

  Also: No. I am not return my gfx card for a 'thin' (which also means diminished gfx capabilities). : P if there is really no viable, I'll get a good wireless USB adapter, however if someone of you recommend.

  Troubleshooting based on other threads:
  *. Tried to change all the settings in the pci bios. There is nothing to resolve. My particular bios does not have very many parameters to set except the activation or deactivation of devices General.

  1. I uninstalled the drivers and the software wireless is related (through the Uninstall/Change & Device Manager), then allowed the system to detect and ask to install it again in the same session. (I have a configuration saved in my folder for download from hawking.)

  2. uninstalled wireless again. Restarted. Reinstalled.

  3 uninstalled. Stop. Out of the wireless card. Starting without a card. (idk why) Stop. Return the card. Started & reinstalled.

  4 uninstalled. Starts in Mode safe. Reinstalled.

  5 documented IRQ settings. IRQ 22 is used by my wireless card and the "High Definition Audio". So tried combinations of uninstalling/disabling audio through settings manager & bios of the device, uninstalled audio software and then installed the wireless card (Eitherway, both devices specify "no conflict" while two permits.)

  6. check my diary of events for apparently relevant errors. Don't know what than a bunch of other things from the East, but is "WARNING: autoconfiguration WLAN Service stopped successfully." So, who researched and tried a few corrections: cmd > netsh > wlan > set autoconfig enabled = yes interface = "wireless network adapter" I get "no such wireless device found." I also tried with "wireless network connection" that I got the same error.

  7. in respect of the above, I tried cmd in admin mode > sfc/scannow > came into services to start the wlan. But these instructions fail because it is already started / auto services.

  8. Finally uninstalled all my ATI software and released the gfx card. Also uninstalled the wireless. Restarted. Re-installed the wireless.

  9 tested back in first Pci wireless. Works. Put back in place in the 2nd, does not work. Gfx card is always out ATM plugged into a cable LAN to have internet at the moment. I was surprised that winupdate found a update for my wireless card, but I have install the driver was the one I used when remembered first install the card waaay back when. Eitherway. Updated. It still does not.

  10. I tried through the Hawkings own connection utility: "Utility of zero Configuration." "passage" to zeroconfig fails or seems to do nothing. ZeroConfig also register my card wireless as "disconnected."

  About to give up because I'm not sure what I can try. I read on attempt to failover to ACPI standard, but I don't have the windows cd. Other methods to do it without the CD and by Device Manager were futile because the options were there to do. The purpose of the level crossing was to attempt to circumvent the automatic IRQ assignment in case that is the question, I'm going to.

  Thanks in advance to anyone who can give an idea. Clues or comments are appreciated just to help me to work along, even if we don't find the right solutions. There are quite a few others "hit my 2nd slot, no internet wireless ' sick out there. Hope that eventually you will help all out.

  Hello

  It's probably the shared IRQ that creates it.

  Get a wireless connection of USB you can connect with a USB extention cable and place it over the system and it should work.

  Example, http://www.newegg.com/Product/Product.aspx?Item=N82E16833166022&cm_re=usn_wireless-_-33-166-022-_-Product

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• S206: Is the slot mini-PCIe for Wi - Fi adapters landlocked in the BIOS?

  Hello

  My good old Ideapad S206 had good enough Wi - Fi problems since I bought it. Basically, the reception is extremely unstable, and it is a problem when the "net" part in "netbook" does not work properly, is it not?

  I tried to date/replace the driver for the card, but I am led to the conclusion that I should try to replace my network card.

  The steps to remove the mini-PCIe card is well documented in the hardware Maintenance Manual, which is really awesome. The map is easy to access, remove and change.

  However, I have a question: is there a form any 'BIOS-lock' on the network cards on this line of netbooks? In other words, I can use any network adapter from mini-PCIe instead of the original one, or is there some kind of white list in the BIOS that prevents the user to install one Wi - Fi card other than the original one? (because if there is a BIOS-lock, there is no point to spend money on another adapter that would still work)

  Thank you very much for your help!

  Hello!

  Here's a quick Heads up on this subject: I finally decided to take a chance and changed the original network card with an Intel Dual Band Wireless-AC 7260 Plus. I'm happy to say it works like a charm! The reception of the network is much better, and I can get a stable WiFi signal at home, that was impossible before.

  I still don't know if there is a whitelist located anywhere in the BIOS, but what I do know, is that you can replace the factory network card with an Intel mini-PCIe trouble-free model. Useful information for users of Ideapad S206 someday perhaps...

  So, problem solved!

• Parasio model SR1650NX: version slot PCIe for model Parasio SR1650NX

  Hello to all members,

  Had a low melting on my desk, so I dragged an old Parasio Compact of the closet in acting.

  I am trying to install an ATI Radeon HD5670 card in the 1650s PCIe slot.

  When I try to start the system after inserting the video card in the pc will not start. Fans of running like crazy, but not

  display and no progress start.

  I looked around for the years 1650 PCIe version, but found no details as the basic layout

  and designations (1 x PCIe).

  Tempting to cross reference the ATI website for my motherboard for the 5670 compatibility was like myself stabbing the

  Eye with a screwdriver... he doing badly and don't's not much else... lol

  Did he know whats going with the boot freeze?

  Thanks in advance.

  Hello:

  I can't find any concrete info, but according to the age of the chipset in your PC, I would say it is not newer than the PCIe x 16 v1.0a.

  http://techreport.com/review/7588/ATI-Radeon-Xpress-200-chipset

  https://en.Wikipedia.org/wiki/PCI_Express

  The Radeon HD5670 is a PCIe x 16 revision v2.1 map, and most of the time that they will not work on a PC with a PCIe x 1 connector. 0 to slot unless there is an update of the BIOS available for your model, which adds support for PCIe x 2.1.

  IMO, you should be able to use a graphics card with a specification file PCIe x 16 v2.0 or more, provided that it works in power supply specifications.

• Satellite A100-028 - How to replace the mini-PCI WiFi card?

  Hello

  I want to replace the Intel with a Module Atheros wireless card.
  Unfortunately on the background there is no cover for the mini PCI Slot.
  Where he is? I guess that they are under the top cover or under the keyboard.
  Should I a short "How To" in this way:
  Which screws I release that covers and so on are to be released.

  Thanks in advance.

  Hi Galdor,

  It of not simple to change the W - Lan card.
  The card ist under the keyboard and under the top cover.
  You have to disassemble the entire and when you do that you lose your warranty.
  I think it's the best for you to contakt a service point for this work.

  Greet
  Thorsten

• Compaq Presario SR1913WM: Win10 install on Compaq Presario SR1913WM default

  No method of installing Windows 10 has worked on my Compaq Presario SR1913WM.
  
  My first favorite/attempt method was a clean install Win10 32 bit ISO burned to a DVD-R (installation method because the USB ports on the SR1913WM are not recognized by any Win10 [this is why I attach a PS/2 keyboard to install]):
  
  With installation (aka clean) "Custom", I get the error
  "We have found all the disks. "For a storage driver, click on load a driver.
  but when I then selects a full DVD - R record of all drivers 'Vista' EXE files for the SR1913WM, (which I thought would have been a better choice than the only other option, XP drivers) I get the error message "no device drivers were found. Make sure that the installation media contains the correct drivers, and then click OK. "(If yes or not I check 'Hide drivers that are not compatible with the hardware on this computer.) »).
  
  (Is there a way to get the real driver INF of the EXE file?  Their execution didn't extract all files [whichI could find, in all cases], and the old trick of "change the zip extension" did not work either.)
  
  With the installation of "Keep applications and personal files", he told me to run the installation from inside 8.1, however that also results in an error if the DVD-R or popup of Microsoft to upgrade on the Win10 * offered * (I hear it, it's a good sign) in the BONES, specifically, either:
  1. "the drive where Windows is installed is locked. Unlock the drive, and then try again. »
  (If I opt for "Keep my files") or,
  2. "there was a problem of reset your PC."
  (If I opt for "Remove all")
  
  Any help, * please *?  Or is this PC stuck on 8.1?

  Compaq Presario SR1913WM care

  (I think my option to Win10 free upgrade expires in 21 days.)

  I'm sorry that your recent attempts to install W10 have not succeeded.

  You can't say that you don't give it your best shot!

  You have to do is say ' I wonder if... "You have tried all the tricks in the book.

• Are my PCIe x 1 slots PCIe 1.0 or 2.0?

  HP Pavilion p6180t CTO desktop PC

  Card mother IPIEL-A3 (Eureka3)

  Hello

  You can download PC Wizard (it's a gift) and get information on the PCI-E slots in your PC.  If you see a 2.5 GB/s link speed, then the speed is PCI-E version 1.

  HP in the past has not posted specifications for the PCI-E slots.  I noticed on some of the newer models the slot machine specifications have been posted.

  PCI-E version 1 will exceed 250 MB/s per lane and version 2 to 500 MB/s per lane.  (each direction)

  A SATA III SSD will be the area of 400-425 MB/s sustained average on a controller SATA III.

• Satellite P300-156 - where is the slot for Bluetooth module internal?

  Someone can say where, inside the laptop's slot to install the internal bluetooth module?
  I found only the second pci-e slot, but under the keyboard, I see the small slot located at and I did not now what is it?

  Help, please

  Hello

  I put t know what slot, you've seen, but as far as I know the connector on the Bluetooth module should be placed close to the connector of the card.
  However, the Bluetooth module is not installed on this notebook.

  Good bye

• Presario SR1913WM support 3 TB hard drive?

  My card Presario SR1913WM mother/BIOS will support a 3 TB hard drive?

  (Specifically, this hard drive.)

  If so, on expansion cards?
  (Specifically, this one and this , both by SIIG.)

  Here is the record of SR1913WM.  (I'm only curious about support for the motherboard, I do understand that there are problems with the help of > 2TiB under Windows XP and with booting from hard drives > 2TiB with either a motherboard without [rare] or any 64-bit Windows operating system not UEFI unless they are on a special expansion card.)

  I can tell you that I am now with a hard drive 3 TB * in my Compaq Presario SR1913WM under Windows XP Pro sp3 with the GPT Hitachi Disk Manager.

  As always I ran boot diagnosis * of the manufacturer of the drive before you always boot into Windows, and I got a bit scared, because he couldn't "see" (and by the speed with which he completed only tested) 801 GB; but according to an email response this morning "..." Hitachi technical support. We are currently updating the Drive Fitness Test. It is not compatible with our 3 TB drives and will not always work a criterion appropriate to this topic. »

  HDS723030ALA640 http://www.hitachigst.com/internal-drives/desktop/deskstar/deskstar-7k3000 model

  * Hitachi Drive Fitness Test 4.16 http://www.hitachigst.com/support/downloads/#DFT

• Clips of the video choppy after export to the formats .m4v.

  I created a photo slideshow with some video clips.  The clips will play in Quicktime, Photo Slideshow, etc.  But when the slideshow is exported in a .m4v format film, the clips are jerky.  Even the DVD created with the .m4v movie plays jerky clips.  Is this a problem with the picture or the format that I export?  Or maybe even my DVD Creator which is Wondershare?

  It probably comes to DVD conversion, but you do not say much on what parts of the film are jerky.

• iMovie 10.1.2 adjust the size of the clip in the timeline

  When I move a clip in the timeline, the size is reduced to a point where I can't move titles correctly.  I tried the setting of the slider, but it does not affect the components of the package.

  Hi, David,.

  You use the scroll bar that you get when you click the gear in the top middle of your screen.  This bar only works on clips in the clips pane, not in the time line.

  The slider beside the button settings in the middle right side of your screen expands the time line so that the clips in it are spread out more.

  Also, if you click on the settings button, a dialog box appears that contains a scroll bar to adjust the size of the clip in the timeline.

  Hope this helps,

  -Rich