Clock is incorrect when booting.

Similar Questions

• Sat T135D: error message 'the user name or password is incorrect' when connecting

  Hello!

  I bought a PC laptop Toshiba T 135 d, and after a few days, I worked with it, I changed something in the users account and now it gives me this error "the user name or password is incorrect" when connecting. I mention that I have not introduced any password before.

  Can you help me?

  > I changed something in the users account
  And how to help? Who knows what you did there.

  I can tell you that it's really bad situation now. Without correct password, you will not be able to start the new installation of the operating system using the HDD recovery procedure.

• How can I keep my clock and icons when I go from desktop to a Web page?

  Original title: XP Home Edition SP3.

  The clock and icons displayed in my taskbar, when I'm at the top of the desktop, do not remain when I go on a web page. Only the zoom feature is displayed. How can I keep my clock and icons when I go from desk top of the page to any web page?

  THAT IS TO SAY 8. I should have kept my question as follows: and not to lose the full screen setting, I chose in the TOOLS. I think I should use F11 to choose between full screen or clock & icons.

• When booting I get the Visual C++ runtime library error message. This application has requested the execution in an unusual way. Any ideas how to fix?

  When booting I get the Visual C++ runtime library error message

  Hi ToddLynch,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  It is sufficient to indicate the complete error message you receive.

  Put the computer to boot and then check if the problem persists
  

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• Aggregation incorrectly when the cell content is deleted rather than zero

  The rule of product standard aggregation result of the aggregation of incorrect when a user entry is removed.
  
  Then
  
  1. no entry - Total = null
  2 entry cell 25 - one that feeds in total
  3 run the rule - Total = 25
  4 remove the contents of the entry of the cell in 2 above
  5 run the rule - Total = * 25 *.
  
  Someone tell me what might have need to change on the business rule to properly handle the above scenario and if this change is likely to have a big impact on the rule of how long takes to run?
  
  
  Thank you
  
  Robert.

  What John meant it's use "set aggmissing on" front of aggregation.

  See this link for more information.
  http://docs.Oracle.com/CD/E12032_01/doc/EPM.921/html_techref/Calc/set_aggmissg.htm

• the desktop gadgets only sometimes appear when booting.

  For these past few weeks Google desktop gadgets clock has not sometimes appear at boot. Now all the gadgets of the Office refuses to even appear when I click the icon in the control panel. What has gone wrong?

  If they disappear again, try to uncheck this option and then repeat for re-check it.

  Not sure why it's just for you, mine did sometimes not appear from time to time in the past, but very well worked for many months now.

  If they fail again, you can try a restore point dates back to a time where they worked very well. That is, if they don't have say 2 weeks ago and then restore to 3 weeks if you can. Not sure, but it can help.

• Error in name of user/password incorrect when you copy files or from folders

  Our company uses a Mac Mini (with OS X Yosemite) and application server to share our internal files. We've had this set-up for year now with everything works well. As of late, however, we are more able to copy files or folders which are in all shared folders. Basically, when we try to copy any file or folder that is located in one of our share points, we get the error "Unable to connect to the server because the name or password is incorrect". This error occurs for each user account, including my own, that has been specified as an administrator account. We are able to add files and folders (e.g.: copy from our local computers to folders) as well as rename the files and folders that are located in shared folders. We can also create files without any errors, so I'm fairly certain it's not a permissions issue. In addition, I tried deleting completely all files and recreate their but not always the same error. I also tried to create new user accounts (accounts directory Local as the Local network directory) and the problem persists when you are connected to the server using these new accounts. I just don't know what else to do as this seems to be a software problem. Any ideas?

  Thank you

  OK, a little update. We have a mac (iMac) client computer that still works under OS X Yosemite. The user on this computer is able to copy files and folders without receiving this error. This same user has also a Macbook that runs El Capitan. Using the same network login for access to the server of their Macbook results in the same error message. All users who receive this error also run El Capitan on their Macs. With this latest development, I'm pretty much able to conclude that this error is the result of El Captain customers access to a shared folder on a server of Yosemite. What is curious is that I did not always have this error since the upgrade to El Capitan. I am sure that this problem came only in the last month or so leading me to conclude that either update to El Capitan (on the computers of our customers) or an update to Yosemite or the Server app) on the computer server has created this error. The issue is upgrading of the computer server to El Capitan solve this problem or am I in for a whole new can or worms?

• Went to my new phone sync and my profile name is incorrect by a letter. Also says that my acct name and pass is incorrect when I try to log in as usual. Help

  When you try to sync my new phone android (galaxy S4 to S5 galaxy), my firefox on firefox sync profile name is incorrect by a letter. Instead of kokochako, it reads kokocako. IM concerned because my name and my password is the same that I use to log on to my laptop and my previous smartphones. I can't synchronize my acct or make changes to my profile name. I hit forgot password to reset, but because the email is wrong Im do not receive an email to change. I have not changed my name ever and my password has not been changed in at least 6 months. He repeated my name and pass is incorrect. My account has been hacked or compromised? All my info is still on my laptop, just under the wrong email address, im afraid...

  To answer:
  I'm worried because I can log in using my laptop (of course my good profile and password), but when I click on synchronize the name next to the profile icon is incorrect.
  
  
  
  What version of Firefox are you running on your labtop?
  Also on your labtop when the wrong name appears where you see that name, can you please attach a screenshot? How to make a screenshot of my problem?

  To answer your question about the identity or the keystrokes, you can run a malware scan to search your computer for malware. Regarding the identity, the user with the e-mail address that appears under the wrong name can receive your confirmation email to reset your password and may be confused (assuming that the name is the email that does not display properly)

  To answer your question how sync works when the next to the profile name icon is incorrect. Can also provide a screenshot of it? What is an email? I don't know which menu you're talking about.

  To fix this, you can create a copy of the profile on the laptop, backup and restore Firefox profiles information disconnect the wrong account and add the appropriate account and password.

  How to:

  1. You must disconnect the incorrect account name.
  • Open Firefox with Profile Manager to verify that there are no more than a profile using several profiles
  • Otherwise disconnect the account in the preferences/Options > Sync Menu
  1. Make a copy of the profile with the link above or below
  • Backup and restore Firefox profiles information
  1. Attach the appropriate account name and synchronize devices or that the account does not have the profile data is in the profile folder. Create a new account with this profile will keep you informed.

  If you have any questions about this, please do not hesitate to ask.

• Re: Tecra A11 off when booting from a CDROM of Imagecast 6

  Hello

  I have two laptop Tecra A11 and when I try to boot with a CD of Imagecast 6, the laptop turns off.
  I tried with another cell A11 and it's the same thing. I tried to change the BIOS settings and an update of the BIOS but nothing works.

  Help!

  Hmmmm... How to help with the product that doesn't have much to do with Toshiba.
  You have other problems?
  For example when you try to start using the Toshiba Recovery disk?

• HP ENVY TS m6 Sleekbook: HP ENVY TS m6 Sleekbook will prepare the auto repair when booting with Seagate Backup Plus 2 to

  I had problems for some time with my HP ENVY when you restart.   I have a backup Seagate more Desktop 2 TB connected via a USB hub.    When it is connected and restarting the computer, it goes to the screen to "prepare the AutoFix.   So I have to unplug and restart and that's fine.     I don't know why it continues to be.   I checked my BIOS and it should boot from the hard drive first.     Any ideas?

  @mikejenkins1,

  Hello and thanks for the display on the HP support forums.  Using a USB hub, you get a signal from one of the disks is trying to make a repair due to a possible disconnection during a writing session.  You will need to do is a test on the external drives to see if one of them has problems.  Try to make a direct connect with each drive connected by tonight and see if they are the problem on their own.

  If one of them is causing the problem, try and use the test drive of windows.  Here is a link to help you with that.

  Check a drive for errors

  Please let me know how things are going.

  Thanks again for posting and have a great day.

• Data acquisition reading incorrect when you use a loop

  Hello

  I wrote a simple VI (00, 01, 10, and 11) output to a circuit connected with 4 resistors. Based on what value the ciruit receives, it passes current through a particular resistance. It is again entered in Labview and traced.

  The problem is when I send a particular value (i.e the 00, 01 and 10 and 11) and get that back, it's okay. But when I send and receive the consectively connected via the loop counter, they are incorrect (not synchronized with the number of the loop).

  I made sure that circuit works very well. It has something to do with the loop synnchronization, reset, value compensation, etc. can be.

  Please Guide...

  Change your DAQ assistant that reads to be 1 sample on request.

  Right now it is set for continuous samples.  And 10 samples at 10 Hz.  Then it runs and starts.  The next iteration, you send a new digital out, but the wait for 4 seconds.  When you read again, you get the next 10 samples that are put into the buffer of data acquisition, but now 40 samples have actually entered the DAQ buffer.  In time your DAQ buffer will be finally complete and raise an error.  In the meantime, you will continually read data continues to become more tainted by the iteration.

• parameter is incorrect when printing RemoteDesktop

  Hello
  I'm having problems with remote desktop printing.

  I have pc with Windows 7 and I connect to the PC with windows 8 via the remote desktop protocol. I have a multifunction M1217nfw HP LaserJet Professional connected wireless to my PC.

  In remote desktop, I see printer, but when I try to print, it says setting is incorrect. I reinstall the drivers, and now he doesn't say nothing, but nothing still print. So basically, I choose 2 printer. It says the parameter is incorrect, the other said nothing. Two of them do not print. Any suggestion?

  Thanks for the help, Lucas

  Problem solved:

  client computer: remove the printer-> add printer-> local (not wireless)

  host machine: computer configuration-> windows components-> remote desktop services-> host-> printer redirection Remote Desktop session

  Select 'use the first remote desktop easy print printer driver' disabled

  Restart the client computer

• Defrag d: when boot

  Sorry for my bad English. I pagedfrg.exe.It to defrag the c: drive every boot but I will not defragment the d drive too at every start. What can I do?

  PageDefrag only defragments files select system that cannot be defragmented when Windows is up and running, (hives of the registry and the swap file), it does not defragment the entire disks.  PageDefrag is a Native NT application that can be run before Windows starts to defragment files that may otherwise not be defragmented when Windows is running.  Other than this kind of file system, the drives can be defragmented when Windows is in place and so it is not necessary to use these applications type of natives to defragment your disks.

  If you want to defragment your drive when you start your computer, you can use the built-in utility Defrag.exe and set a scheduled task to run when your computer starts.

  How to automate disk defragmenter using Task Scheduler tool in Windows XP

  Please note that there is no need to defrag every boot!

  John

• I'm getting error .exe - image incorrect when I start the computer and click on anything

  I keep on getting error bad .exe continuous Image on my Windows XP machine. Help, please

  Hi leondsouza,

  1. What is the exact error message that you receive?

  2. did you of recent changes on the computer?

  3. do you have security software installed on the computer?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• When booting computer error says "frequency out of range" in Vista

  I tried to play the fortress team 2 out of steam when he says "frequency out of range" when he started. I restarted my computer, he got to the start screen, but with the screen that he always says "Frequency out of range" there is sound but no screen. I tried to change the resolution in safe mode, but it still doesn't work. need help please

  * original title - when I turn on my computer, it says "frequency out of range."

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do the restore of the system in Safe Mode, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner