Clock of endurance causing data connection problems

I use my Z5 Compact with all the options under Mode endurance running, however, I have noticed pick up my phone to use, the data connection is not available immediately, instead I have to wait for about 10 seconds before I can use any data.

I have been trying to isolate the issue here and it seems that as long as I've got stamina clock disabled, all right. I only noticed this since the recent update of the firmware, but not sure that this is the cause.

Everyone knows about this problem?

When the clock of endurance is activated, there could be a delay for the data connection. It is planned to fix in the next update of software.

Tags: Sony Phones

Similar Questions

  • iPhone 5 c data connection problems

    I have a 5 c iPhone running iOS 9.3.1. I can't connect to a data connection. I have 3G and LTE on and off homelessness. I was not able to connect to a given since iOS 8.x.x connectio. When I enabled cellular data, it said 3 G in the top left corner and finally changes to 1 x. If I try to load a website in Safari, I get a pop up that say 'impossible to connect to the Internet' or 'a cellular connection is not currently permitted. I had to have my SIM card fixed, so my operator gave me a replacement phone, and the upper left corner says LTE when I turned on a data connection and it worked by the fine.

    lelandsc wrote:

    I had to have my SIM card fixed, so my operator gave me a replacement phone, and the upper left corner says LTE when I turned on a data connection and it worked by the fine.

    What do you mean that you need to get your SIM card fixed? It sounds like one of two things that cause you problems, either there is a problem with your SIM, or you need to troubleshoot your phone. Have what troubleshooting you tried? You don't list everything, and if you suffer from this problem since iOS 8, I would ask why you do not have the home phone? Who provides a service for your device, Apple, an Apple authorized service provider or your carrier?

  • BlackBerry classic classic BlackBerry 4G data connection problem

    Hello people,

    I just bought the classic BB, and I must say that it is a great device (much better then the Android I had before).

    I have only 1 problem. Standard (T-Mobile) connection is 4G. This means:

    (1) I can use the phone to make calls

    (2) it can send and receive data

    The problem I have is that several times a day he spends in 4g, which means that I can call only, but the transfer of data is no longer possible.

    I can solve it by going to "network settings", search for the connection, and then click 4G.

    Maybe the connection is lost sometimes, which is causing the problem, but I don't know why he is not automatically pick the best connection.

    Anyone else have this problem?

    It's pretty boring.

    Thanks in advance for your help.

    Walk

    I know its been a while!

    In fact, I found a solution to this problem.

    It was something to do with conflict with the WIFI. I turned off the wifi and the data connection back, then turn on the wifi when necessary.

    I have an unlimited plan now is not a problem, but nevertheless a faff!

  • Data connection problem Note Lenovo K3

    I recently purchased the Lenovo K3 Note from the sale online in India.

    I am currently about homelessness on the Vodafone network and I am facing problems using the data connection (3 G) on the phone.

    I can use internet without any problem the WiFi but I can't connect to the internet using my active data connection (3G), even though I have an active data plan. I tried to download the internet settings of my network provider, but they do not seem to recognize this device / do not provide automatic internet settings for the K3 Lenovo's Note.

    I also tried to restore default settings under the names of access points in mobile networks, but no help.

    KV1 wrote:
    Hello, follow the same instructions
    Settings > mobile networks > Switched data roaming option WE > open network opertaors > selected operator > is turned off and turned back on - na NOT WORKING... Please notify

    Contact your service provider to restore the internet connections.

    Ask them specifically for the APN settings

    (Settings > mobile networks > access point names > name for example: OPTUS YES INTERNET)

    APN - yesinternet;

    Type AFN - by default,

    SUPL; Proxy - undefined... etc)

    Turn ON the phone

    Data roaming should be on

    Cellular data must be turned on

    (My phone works fine on 4G now)

  • Mobile data connectivity problem

    My phone shows that is has 4G in the status bar, but my application does not connect to the internet. But when I restart my device it becomes normal and same problem arises again. Can someone give me a permanent solution.

    Try the procedure described in this article to see if they help.

    If you cannot connect to a cellular network or cellular data - Apple Support

  • Update Vista caused internet connection problems

    I have tried repairing computer of my sister, who says simply ceased to connect to the internet all of a sudden.  She said that began February 1... After looking through the system restore, I noticed there was an update installed on 31 January, so I restored the computer to the day prior to that, and now the internet works again.  Since then, I have disabled the automatic updates.  My question is: How can I solve this problem?  I can't leave just for always updates disabled...

    Hello
     
    Please can you us on the update that is causing this issue?
     
    This problem occurs especially if there is a conflict between the update and the application program on your computer, mainly the antivirus program.
     
    That's why I suggest to disable and re-enable the antivirus program or the security on your computer and try to update the verification of updates if the problem is resolved.
    Ensure that you re - activate the security on your computer program after a repair.
     
    Try here to reset windows update components and then try to install the updates.
     
    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058

    Also, I recommend you to uninstall and reinstall the network drivers and see if it makes a difference. You must be logged on as administrator to perform these steps.

    1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and
    Maintenance and then click Device Manager. If you are prompted for an administrator
    password or confirmation, type the password or provide confirmation.
    2. in Device Manager, locate the device, and then double-click the device name.
    3. click Driver tab, then click on uninstall the driver and follow the instructions.

    Now, try to follow the link provided to update a hardware driver that is not working properly and check the question below.

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Also try to troubleshoot using the network troubleshooter in Windows 7 and make sure that the error message to follow the link provided below.

    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

    Thank you, and in what concerns:
    I. Suuresh Kumar-Microsoft Support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Install unsigned driver caused network connectivity problem

    Original title: problem with deterministic network improve miniport - unsigned driver

    We recently bought a new laptop of Lenovo Edge E540.  When we installed our software Client Cisco it installs a driver Miniport of Deterministic Network Enhancer for each of the adapters.  These drivers are not signed, and it blocks my network connection.  We have laptops Lenovo E540 since a previous order and it didn't happen.  Is there a way I can remove the miniport driver and/or to allow the drivers can be installed not signed?

    Hello

     

    If the driver is not signed it means that this driver is also not have a digital signature, or it has been signed with a digital signature that is not verified by a certification authority. Therefore, we do not recommend installing unsigned drivers as this is a security feature that makes it much more difficult for average users to install malicious hardware drivers on their systems. You must install this driver if you obtained this disc from the manufacturer of origin or from your system administrator.

    Is the computer on the domain?

     
    To uninstall the unsigned driver, you can see the steps mentioned below.
    1. press Windows + R, type devmgmt.msc, and then click ok.
    2. now look for and right-click on the driver and click on uninstall.

    3. restart the computer.

    Alternatively, you can contact Cisco support community for assistance on this issue:

    I hope this helps. Please get back to us if you need further assistance.

  • connection problem of data with the support of mobistar (Belgium)

    WiFi works. Data connection isn't.

    The signal 'H' or 'E' is highlighted. I tried with the parameters of android and iphone Mobistar Belgium Web site and with all types of authentication. But it is impossible to connect.

    I will try with a sim card from another carrier and let you know.

    In the meantime, does anyone know if there are any specific APN settings for mobistar.be?

    Hi yellowtrolley,

    Thank you for reporting this issue. Please try the following to the APN settings I found on this site nd make sure your specific device supports the following frequencies:

    • GSM 900/1800 (2G GSM) net
    • W CDMA 2100 (3 G UMTS)

    The APN settings:

    • username: mobistar
    • password: mobistar
    • Name of the APN: web.pro.be

    You can also try this page if you need more specific parameters.

    Please let us know if this solves your problem, or if you have other questions about your Firefox OS device.

    Thank you!! =)

    -Ralph

  • Data connection with Vibe P1 problem

    My phone is having problem of cellular connection data connection.
    But it was working fine before the last update.
    I don't know if it's a problem of software update.
    I tried many things, I talked with my service provider (BSNL) for hours and tried everything what they suggest, all to nothing does not.
    I even used another SIM (Vodafone) to check if it was the problem of service providers, but no, the phone does not connect even in this case.
    Tried to change the APN, the network settings and so on.
    Kindly guide me and help me solve this problem.
    Thank you very much.

    Have you tried a factory reset? You have mobile data enabled in the settings?

  • Internet connectivity problems Acer caused by the use of the wrong driver/adapter. Packet scheduler miniport problems.

    I have an Acer Aspire One A150 Netbook with Windows XP home SP3 and I have internet connectivity problems. In my device manager, there are 5 network adapters: 2 seems to be your run of the mill Atheros wireless and Realtek PCI. those who are very good. However, the 3 Planner package miniports have the icons of exclamation mark on them. Ive tried everything I have kno how to do including trying to reinstall on the Acer site. Help?

    Hi Olesauce21,

    1. have you done any hardware changes or software on your computer before this problem?

    2. you receive an error message when you connect to the internet?

    You can follow this link & check if the problem persists:

    How to solve the possible causes of Internet connection problems in Windows XP?


    Reference:
    Wired and wireless in Windows network connection problems

    Advanced Troubleshooting for Windows workstations network card

    Hope the helps of information.

  • [Attention!] Creating cloud causing connection problems serious.

    It is a very serious problem, and I hope that if anyone else is experiencing this, they find this thread.

    So the problem?

    Suddenly, my internet connection started having serious problems, and I thought that my network card sang her last song.
    Stopped loading websites, applications stopped connecting to the cloud etc, although some applications using direct IP to connect worked, so my first thought was a DNS issue.

    I begin troubleshooting my PC for hours without success, which included tracking IP addresses and DNS servers, change of drivers for my network card, try to other routers and whatnot. The list goes on and.

    I even re-installed the whole PC after hours of no results.

    So with a clean PC, things started working again. I then started to reinstall all my software from scratch, and all of a sudden, the problem returns. Again, I begin troubleshooting. After starting the PC in safe mode with network capabilities, I realized that it wasn't my network card.
    After hours of restarting and deactivation/activation process in the background, the cultprit was obvious.

    Creative cloud caused network issues for each unique application, I used. But it only happened when the CC began the initial load of windows. I can start it then no problem.

    So basically:

    New installation of PC

    Install CC
    Is connection problems.

    Solution: Disable the autostart for "Adobe Creative Cloud"

    Autostart can be disabled in the application itself, or through research 'msconfig' on windows, auto-start tab.

    Someone has to take a look at this. I was very close to the purchase of new equipment for my computer, or replace all MOBO, CPU, RAM etc. It took my almost two days to understand this. It wasn't an obvious problem.

    I found something to add for PC users using Windows 10 (not sure how to apply it to Mac):

    • Run msconfig - takes you to the configuration of the system (as previously indicated by Florrpan)
    • Check "Selective startup" is selected on the general tab.
    • Check load system services and load startup items.
    • Go to the Services tab.
    • Disable all Adobe services and click on apply.
    • Go to start and open the Task Manager.
    • Ensure Adobe Creative Cloud is disabled - this can be done by using the right mouse button or the button disable at the bottom of the window.
    • Make sure that Adobe Updater utility to start is disabled.
    • Make sure Acrotray is off.
    • Restart your PC.

    Happy creating! If someone is all this and is facing questions please let me know

  • Satellite Pro m USB devices connection problems

    Hello visitors and insiders.

    can someone help me, please? - or are the causes of the problems of programmed BIOS is not perfect?

    I put on the USB Ports (I tried all 3 Ports) after correct installation of the most recent drivers for devices and the BIOS and chipset.
    I tried MAGIX encoder by USB and PINNACLE for USB encoder - both signal-request-problems and the two could not shut down the system after connecting with USB and close with her current for USB device.

    I tried this on different WinXP installiations (multiboot) - but on all systems even.

    The same reaction has been, as I have connected a special CUSHION cooler for laptop with additional USB Ports.
    The CUSHION cooled - but the USB Ports do not work for all devices (devices I am familiar with the)
    Ports of origin of the laptop, has failed to TRIM, too). (worked directly devices: mouse, webcam, keyboard, drive hard usb)

    What should do? .. If anyone know Somethin ' help... I will be very happy.

    Thank you very much!!! (Sorry for my English is not perfect)

    Ben

    Is what model of laptop exactly?

    Have you installed Windows yourself? Or it was preinstalled?

    Looks like it's a software problem, bad drivers USB can at fault.

    You are able to back up your data and run recovery?

  • WLan Satellite P100 - 105L connection problems:

    I have the following problem.

    Satellite P100-105 notes, with XP home. All drivers up to date, connection via WiFi.
    When I connect to the internet using IE7, IE6, Mozilla, Opera a few times I just message "waiting for response from...» "in the status bar and the page not to load not.
    If I update its ok, or to certain pages it won't work even if I update (usually on the typo 3 saving a document).

    1. I have no virus, no Trojan.
    2. try with IE without addons, allso with IE when I was in "safe mode" XP.
    3 downloaded the latest WIFI drivers, latest version of the bios.
    4. when I try on other notes of toshiba, another model with win vista on IE7, it works normally. Allso when I download huge files, its ok.
    5. do you have legal and up to date windows XP with Service Pack 2

    so, I can say 4 things:
    1. it's not caused by signal,
    2. his sweet independent navigation.
    3. it may not be caused by HW error, if he would, large downloads/uploads will fail
    4 any other software, it is stored in the normal state, its not the cause.

    SOMEONE HELPPP

    sound very, very boring.

    > When I connect to the internet using IE7, IE6, Mozilla, Opera, a few times I just message "waiting for response from...» "in the status bar, and the page does not load.

    You said sometimes? So I guess he can't every time while you use the WiFi network.

    > 4. When I try it on other notes of Toshiba, another model with win vista on IE7, it works normally. Also when I download huge files, its ok.
    The two laptops use the same WLan card? If this is while there may be a compatibility problem between the router and the wireless network card

    But generally it is not easy to say what could be the problem. Have you checked the same message is displayed using the LAN cable?
    Check it!

  • "425 can't open data connection" that mean?

    Having a problem with downloading the drivers for my printer and installing software

    Cannot open data connection error.

    Problem

    425 can't open data connection error

    Cause

    The 425 error means that the data channel is blocked or closed between you and the server you are trying to connect to.

    Solution

    • For active connections open ports 20 and 21
    • For passive connections open ports 21 and 1024 + (and higher)

    If it is impossible to establish a successful connection, check all devices that are between the client and the server to ensure that the appropriate ports are open (for example, routers).

  • Network host connectivity problem

    Hi all
    I have a bit of a strange an ESXi 5 U1 host connectivity problem. The host has a network card in the 10.0.0.0/24 subnet, and from there it can ping both devices but cannot ping to two other devices. To explain a little better:
    There are two hosts with identical hardware (HP ProLiant DL380 G6) both built with the same picture of ESXi 5 U1 from HP.
    There is an IP address on the switch (Cisco 3750 gigabit) management.
    There are two servers running Openfiler, which I'll use for ISCSI data banks.
    All these devices are in the same VLAN in the 10.0.0.0/24 subnet. host 1 is identical to the 2 host configuration (bar IP address and host name, etc.). Host can ping all devices on the subnet 1 and maybe ping by all devices on the seubnet. 2, the one with the issue of the host can ping and ping the Cisco FoxyCode and host 1, but cannot ping or ping by one of the two boxes openfiler.
    Research on the openfiler boxes I see missing entries in the arp (marked as incomplete) table. Host 2 he entered complete arp for the openfiler boxes. A trace of the wireshark package shows the openfilers sending arp requests but no response from host 2. The Cisco and host 1 to get the answers.
    I have patched the critical fixes host 2 until the last critical and no, applied the latest versions of firmware HP etc. Swapped, cables, tried different switch ports and even different NICs on host 2, all to nothing does not. The Cisco ports configured all identically from host 1. The openfiler boxes are set up with interfaces servile and the Cisco switch ports are etherchannelled for these. There is no etherchannel or link aggregation etc for guests, straight connection to the front in the VLAN.
    Interestingly, all devices also has an interface in the 192.168.2.0/sous-reseau 24 for management and all devices can see all other devices here absolutely fine.
    If anyone has any ideas on where to go from here please let me know, I'm going crazy trying to understand this one!

    ts999 wrote:

    The openfiler boxes are set up with interfaces servile and the Cisco switch ports are etherchannelled for these.

    I wonder if the Etherchannels in Openfiler servers might not work. Depending on how the switch load balances executives, this could cause a host to work and the other is not.

Maybe you are looking for