cloning disk hard windows for Windows 7

Similar Questions

• What is the best practice for disk hard extension for VM?

  My client asked D drive expansion for 100 GB for VM is 2008. I have a few questions to this

  1. can I use HDD for the extension (using the same disk and even Datastore1)?

  Ex: D drive has now 400GB, if I add an another 100 GB on the same hard drive, it will go 500 GB

  2. can I use different hard drive for expansion (creating new HARD drive and using the same datastore1)

  Ex: Now a 400 GB drive, created the new HARD drive and added 100 GB using the same Datastore1

  
  

  3. can I use different and expanded to different hard drive Datastore2 hard drive?

  Ex: Car has now 400 GB, new HDD created with 100 GB of different datastore2

  (1) Yes, you can use the same disc - and it will be expanded to 500 GB - you must use the disk manager in 2008 to extend the drive to make space available

  2 & 3) Yes, you can create a new HARD drive and add to the machine and it can be on another store of VMFS data

• HP 15-ba057ng: disk HARD Normal for HP 15-ba057ng

  This laptop comes with a 256 GB SSD M2. My question is, can be added to this device a normal SATA HDD after purchase? If so, it a caddy hard drive for this already or we need to be purchased? Will, thus making the guarantee?

  Here is the Service Manual:

  Manual

  Look at pages 50-52-55-56. The WSSD m2 and a normal hard drive go into the same physical space and use the same connector on the motherboard, just with different cards. This is so a ' either / or ' thing. A hard drive, m2 or SATA.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• I need to change my mobile device windows from disk hard mode for activesync mode.__There is no activesync in the forum here.

  The screen is broken on my htc touch diamond.
  I want to save before you send it away for repair.
  I can't back up because I can't use activesync because the last time I used the unit is in hard disk mode and now it is stuck in disk mode.
  How can I change the device remotely from the drive using the activesync mode?

  Hello Touchthediamond,

  Thanks for visiting the site of the community of Microsoft Windows XP. The question you have posted is related to Windows Mobile and would be better suited to the Windows Phone community. Please visit the link below to find a community that will provide the support you want.

  http://social.Microsoft.com/forums/en-us/category/WindowsMobile/

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• external disk hard Windows Media 11 & wma - DRM music files format

  11 of WMP LOVE for music! - But storage is full in XP to a PC the Syetem - external hard disc Segate 1 System. 5 t office. Let the Seagate nursery copy my music file to drive C (new) F Drive. Added to the location FDrive/My music for WMP monitor & removed from the location of drive/C. WMP acknowledged the location F/disk/My Music (new) & listed music but not of ALBUM. I tried the INFORMATION of MEDIA to APPLY - failed - tried the FIND ALBUM INFO & UPDATE ALBUM INFO-kind of worked but apply same info Album to 3-4 different records artist. Renounced this place of MY application, deleted and removed from f-Drive music. Tried to drag the folder music from the disc C to F - disk - started OK with 1 artist folder-2nd & 3rd but on 4th record combined all files in the folder 1 and missing album artwork. Won't no matter what futher deleted MY F-player music file again and started reserching problem on Support MS and Segate support-not much info in the problem of location of ether, however in the Support found MS ID of Article: 92576 - YOU cannot transcode DRM-protected media in WMP 11.  All my music is WMA - DRM format - SEVERAL CONCERTS! -do not know if this format has nothing to do with the problem?

  I m confused and do not know what is on the extension of my storage and the WMA DRM format. Please give advice on how expand storage, format WMA-DRM, to maintain and use Windows Media Player as I have in the past. I tried other music media but have found nothing better than WMP-(donc pour)

  The files are in WMA format, does not mean that they are protected by DRM. In addition, transcoding, conversion from one format to another (for example during synchronization), which is not relevant here.

  In WMP, please go to Tools - Options - Library (press Ctrl + M, if you don't see the Tools menu). Is music to reorganize in rip music folder checked? If so, uncheck the box and click OK. Then try to move the files of music again. It works correctly now?

• Dv6 2112 his re install disk hard windows 7 1 (301)

  helppppppppppppppp

  I tried to reinsatall windows 7 I formatted the hd and windows loaded, but it happens with no devices signed drivers found tried everything can think of my little mind so if anyone can help pleaseeeeeeeeeeeeeeeeeee oh made all the drive controls hard memory etc. everything ok but does not start disk from which is a genuine copy of windows 7

  Hello

  Given that you get a Smart error (301) for the hard disk, it's almost certainly why you run in question when try to reinstall Windows 7 and to fix this, the drive must be replaced.

  It is a fairly simple procedure as indicated below.

  Your laptop is listed as coming with a 320 GB HARD drive, however the reader at the link below is an example of one that would be perfect for your laptop and offers a bit more storage.

  Hard drive 500 GB

  The procedure to replace the hard drive begins on Page 53 of your & Maintenance Guide.

  Once this is done, just install Windows 7 onto the new drive.

  All the drivers you need can be found on the following link.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?CC=UK&DLC=en&docName=c02054971&LC=en&OS=4063&product=4099876&sw_lang=&

  Best regards

  DP - K

• Desktop H500s put in the disk hard windows 10 from another OPERATING SYSTEM PC - ERROR CODE 1962 - No.

  I tried to replace the current hard drive with the disc provided with windows 10 from another PC.

  I have is after having swapped the hard drive. The system cannot load Windows 10 and displays this message "ERROR CODE 1962 - No. OPERATING SYSTEM".

  The main reason I like to swap the drive is because it is a larger and faster disk and it come with Windows 10 Enterprise license. Instead of my current hard drive of Levono who only 8.1 Windows

  I understand that the pilot is maybe a problem. But, I should at least be able to see the Windows screen and I can fix it the driver, instead of the message "ERROR CODE 1962 - No. OPERATING SYSTEM"

  Note: I did I tried to put this disc in the CD player, I've found, it can read the disc. Therefore, should not be SATA non-compliance issue.

  Any suggestion?

  Hope to hear the suggestion

  Dear all

  I managed to fix in Boot "Disable UEFI and activate the legacy", my system is running. I just need to install the audio driver after the system is running

  Usefully it doesn't matter who will help to have the same problem

• After installing the new disk hard Windows XP tells me that I have to reactivate.

  original title: problem after the activation of the product
  I put a new hard drive in my computer and activated with microsoft. When I restarted my computer, I get a window saying I need to activate my copy. If I click No, it restarts the computer, if I close Yes it says it is already activated and when I click ok it reboots the computer

  I put a new hard drive in my computer and activated with microsoft. When I restarted my computer, I get a window saying I need to activate my copy. If I click No, it restarts the computer, if I close Yes it says it is already activated and when I click ok it reboots the computer

  Start in safe mode, install SP2, SP3 install.

  Reboot in normal mode, it should work. I think that it maybe an old cd rather than the last version supplied with certificate of authenticity.

  Cheers (mine works now)

  TDI

• HP Envy Touchsmart j122TX 15: cloning of HARD drive for an SSD and installation on HP Envy Touchsmart 15 j122TX

  I will replace an old 1 TB HHD by a new 1 TB SSD Samsung 850 EVO on my HP Envy 15 Touchsmart j122TX. I also have Acronis True Image 2015. How can I go on cloning of the HDD to the SSD and installing the SSD on my HP, implementation of the operating system in order to ensure a good performance? Please give me step by step instructions I'm inexperienced. Thank you for your support.

  You need a bootable media because you cannot clone Windows player while it is in use. If you start another source (bootable support) leaving the main hard drive passive and quiet, so it can be copied sector to the new clean disk. I explained you start from the Acronis Disk and when the interface is in place you select "utility" and one of them is 'clone disk '. This is how you use the bootable disc in the cloning process.

  As with the post before me you simply remove the MSSD. However, in this case the user would do a clean install. Cloning will be hover over the driver of storage for the SSD controller and will not have to load the RAID driver separately. The way you do it is much easier.  I would like to dissociate the WSSD since the main hard drive using Intel Rapid Storage (disable acceleration), remove the WSSD and start-up of the former hard drive without the WSSD in place one or two times before cloning.

• Best method/tool for cloning a HARD drive for data recovery default?

  I've been brooding on this topic "what method / tool is the best for the cloning of a HDD failure - including the drive from the system - for the recovery of data on the clone." Someone at - he tried cloning for this specific purpose and got no results? I would be interested if they can share their experience or even air their views on the subject.

  Use one of the following... but do it quickly.

  If you have a Western Digital hard drive, you can get a version of Acronis True Image free of WD (http://support.wdc.com/product/downloaddetail.asp?swid=119) or you can get the software of cloning separately (this is not an exhaustive list and in no particular order, some are free, some not):

  Acronis True Image Home
  EASEUS ToDo Backup
  Paragon Drive Copy or Partition Manager Personal
  Casper
  Norton Ghost

  XXClone

  Macrium Reflect free

• cloning disk hard question

  Hi, I have a situation where I want to duplicate existing content from a Mac Mini 2.1 running Snow Leopard-

  a new end of 2012 i7 Mini - who came to me with Mt.Lion already installed.

  Should I expect any problem if I use Carbon Copy Cloner for this task?  I'm thinking that I need to first

  reformat the HD of the new Mini - but fact a while since I did anything like that, and assuming that the CCC will be

  have some instruction somewhere on the process.  As long as the target firewire is always an option, I did not

  Figure he would have no problem using the CCC... I was just wondering if there are any known issues, that I should be aware of before

  I perform this task?  Why 10.6?  It is stable and I have a few recording applications that work very well with it, but maybe not

  with the most recent OS. They may not be able to be reinstalled on a newer OS. It mainly for recording.

  Thank you!

  Mike

  You shouldn't have any problem with that. Yes, you have to first format in disk utility.

• Adapter disk HARD Ultrabay for two (compatible) T410s and T430s

  Hello

  Anyone know if lenovo has a HARD ultrabay drive adapter that can serve both T410s and T430s.

  I have gone through in this regard but the NP are not the same and either PN does not point to the two system.

  Thanks for the clarification.

  Kind regards

  João

  they are the same and can be used interchangeably.

• Compatibility of the disk HARD depth for P50?

  The P50 does support 9.5 mm HDD / SSD?

  P50 can't stand 9.5 mm HARD drive out of the box.

  However, if you cut down the teeth on the back cover, you can cram a 9.5 mm.

• Services Windows problems after cloning a HARD drive

  Hello

  I recently cloned my HARD for one SSD drive, using the SSD as my boot device. Since then, I was able to successfully access Windows services.

  For example, I've tried to expand a partition on my SSD and went to computer management. I got a message saying that it

  "cannot open log events on the computer service.

  I click OK and the computer management opens.

  Clicking on device management, I get a long enough message that appears that says

  'Disk management could not open Virtual Disk Service (VDS) [name of the hard drive]. This can occur if the remote computer does not support VDS, or if a connection cannot be established because it has been blocked by a firewall of Windows. For more information see on diagnose and correct this problem, see Troubleshooting Disk Management by using disk management. »

  I click OK and the message disappears.

  If I click on Services and Applications in the left pane I get WMI control and Services in the central pane.

  I double-click on Services, scroll down to virtual disk, double-click anywhere on the line, I get

  "Windows could not open the service of virtual disk for playback on the local computer. Error 1726 the remote procedure call failed. »

  Is someone can you please tell me what is happening? What have I done? Why am I not able to access disk management?

  I tried sfc/scannow and I get the message

  "Protection of resources Windows could not start repair service".

  EEK! What have I done?

  Thanks for the help, but I thought about it.

  I had turned off by mistake in my BIOS PATA, and causing the problem.

  Thank you for taking the time to respond, however. It's very appreciated.

• Can the two versions of Windows 7 installed once on two disks be used for the hot with the same PC swap

  I want to use the same key to install Windows 7 on two different HARD drives and use them one at a time on the same PC.

  I have a hot spare disk Bay. I want to be able to exchange the HARD disk for troubleshooting Windows etc. Should I buy another key?

  I just realized that some information I have given is incorrect.

  I have not installed a new copy of Windows 7 on the second disc. I actually reconfigured it with an image of the first hard drive.

  In this case can I leave Windows on the second disk, and exchange them warm without any problem?

  I've heard people cloning the C drive and there change places if anything ever goes wrong.

  Would not be Windows treats the second disc I've reconfigured as a cloned disk?

  Keylonta:

  You are right. If you clone a drive with a good installation running, the system knows no difference between readers. It works simply. It is not request a new activation if Exchange you them.

  Similarly, if you use something like Acronis to make an image (complete backup of the drive) and then burn that image on a new disk, the system accepts the new drive as the former and, once again, do not request a reactivation.