Cloning of R12 eBusiness application has been integrated with SSO

We almost had.

Now, we need help.

We have a suite of e-Business of production (R12.0.4) that has been incorporated into an OID/SSO of production instance. We have also 2 ebusiness development environments (cloned production) who have been integrated into an OID/SSO development instance.

When it came time to re - clone (refresh) a development environment, I unregister the existing development OID clone, remove the cloned R12 environment, perform the new clone that you would normally to clone an R12 application... and this is where it got tricky... I would like to delete references UNIQUE app of newly cloned A12 authentication (using txkrun.pl as recommended by Oracle), and then I ran the deregistration (again, using such txkrun.pl) recommended by Oracle who would not say that the application has not been registered with DIOS (expected result) and finally, run the process recording, as recommended by Oracle.

It worked very well for a while, and we were able to clone R12 environments and they delivered to our users who were simply happy that even in our development and test cases, they have to remember the passwords.

This is where we made the fatal mistake.

We received an urgent call to clone both of our development to production environments. So to immediately start on the process, we went ahead and deleted the existing applications of dev R12 without unregister of their OID first. When the new clones were completed, we removed the references in the new clones by using txkrun.pl as we have always done and that part worked. We also ran txkrun.pl unregister the application of the OID and that we also gave the expected result to say that the application did not exist in the OID. However, when we tried to register the newly cloned applications, we get error "* ERROR: cannot save an application that is already registered.". We are trying to write off registration the application again and it says that there is not, we try to register again and still the same error that the application is already registered.

My question is, is there a possible way to clean your OID environment without using txkrun.pl? I would like to delete the entries for my old OID development environments so that I can save my new development environments (which happens to have the same name).

If someone of you has done this, I would appreciate the help.

Marvin

Marvin,

You make me feel better. I thought that I could be the only person who had already done it. ;-) It is not too bad to clean.

I am referencing the old tickets and are not currently have access to an OID instance to verify, but try this:

In management of the entry, look under the value default context of Oracle, under Services and e-Business. You should see an entry for your instance of the EBS. (For example, the unique name may be: cn = SCREW, cn is EBusiness, cn = Services, cn = OracleContext). Delete this record, and you should be set. You may need to remove the other links to that record under your custom context. For example, there may also be a DN cn = SCREW, cn = EBusiness, cn is Services, cn = OracleContext, dc your_org, dc = com is

I was afraid at first that there could be a ton of junk to delete OID connects to the instance EBS approval, but I was not able to find all the other likely entries and was able to re-enroll without problems after removing these two entries.

I hope this helps!

Kind regards

John P.
http://only4left.jpiwowar.com

Tags: Oracle Applications

Similar Questions

  • has deleted part of the key of windows vista which has been integrated with the laptop and when I start the laptop it asks activation, what to do, please give solutions

    the sticker on my laptop has disappeared/deleted and I am not able to see the full key for windows vista operating system has been pre-installed on the laptop and now she asks activation and I did not quite correct key because he got faded/deleted, how can I get the key to work on the laptop I have compaq-presario-cq60-420 US laptop.please help me or give me the microsoft contact numbers where I can get my key of windows vista back by providing the serial number and the product number for my laptop.  I am unable to work as the laptop does not work without the activation key.

    Hello

    You can use a magnifying glass and a flashlight to see if you can read the numbers of the product key on the label.

    Or take a picture of it and expand it on the screen.

    ______________________________________________________________

    Also that, read also:

    You can contact your computer manufacturer and ask them to send you a set of recovery disks and to reinstall the operating system.

    They should do this for a fee, if they still have available to them.

    _____________________________________________________________

    And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

    The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

    Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

    Ask them to the proper key sequence.

    ____________________________________________________________

    And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

    Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

    If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

    The methods above resettlement generally do not require allows you to provide a product key during Installation, the recovery process uses the Installation product key factory to activate automatically during the resettlement process.

    See you soon.

  • Pregnant wireless Bose SoundLink has been integrated with success but don't connect/play audio via Bluetooth

    Separated from this thread.

    How did you get your SoundLink Mini system works? I have the same camera, he paired, but does not connect properly.

    I'm not sure it was a while back, but after having revisited the installation instructions, I think I uninstalled it to devices and printers by selecting 'delete device '.  I think that I also removed from the Blue Tooth device section in Device Manager.  I probably also removed the PC as a device coupled to the BOSE by pressing the bluetooth button on top of the soundlink speaker for I think that something like 5 seconds (see Manual)

    I've then matched again according to the instructions of Bose.  Since then, he has worked perfectly.  I think that they don't make it very clear what is supposed to happen as part of the connection process when you want to use the device.  When the computer is turned on, press the power button on the Soundlink.  There is a small white light above the button on the Bose Blutetooth.  It starts flashing and you will get a single "beep" that it connects, the white light is solid and it is connected

    Hope this might be of some use

  • I can't create the flash apk as an error that says "the application has been packed with a captive runtime.

    Hi community, Im trying to make my first apk with Adobe Flash (it's a file very easy) and this error is apperaing all time;

    914dfd115f8208800b8d25c53bb3cbb7o.png

    I changed a lot of options in "Android application" but it does not work. Can you help me?

    Thanks!

    This is just a warning.  You can ignore it.

  • What happened to DVD Studio Pro?  Has been integrated in some kind or use put on hold?

    What happened to DVD Studio Pro?  Has been integrated in some kind or use put on hold?  Is there a product alternative studio now in X?

    DVD SP is dead and won't work reliably, so, in the current operating system.  If you need the flexibility of the MS DVD, then you need to have a dedicated OS (OS X 7 maximum).

    In the current operating system, basic DVD creation is integrated into the sharing of video and photo applications menu.  If you want more options, there are more compressor 4.

    Ta

  • In Labview 8.6 and MAX, I can change a scale for a voltage read the string in a task once the application has been built and installed.

    In Labview 8.6 and MAX, I can change a scale for a voltage read the string in a task once the application has been built and installed on a second PC. Where's the info of the scale which is held?

    Hello

    Once you have built your VI and compiled into an executable file and deployed on another machine, it essentially becomes a file read-only, which means that you will not be able to change the balance in this deployed application.

    Kind regards

    Marcus

  • On my new Mac Pro, I can not install adobe creative cloud app.  Adobe told me every time that the application has been damaged.

    I can't install adobe creative cloud app on my new Mac Pro desktop.

    When I download the app and try to install it, adobe says that the application has been damaged, then starts all over again.

    What can I do to fix this?

    joke

    Try to perform the steps mentioned on link below

    "Failed to install" error Creative Cloud Desktop application

  • "An invalid application has been selected" message when you try to upgrade

    has my desktop Adobe Acrobat 7.0 Standard - Version 7.1.0 (23/04/08 04:22) installed. I am trying to upgrade and received a download link for the older versions of Adobe Acrobat: http://www.adobe.com/support/downloads/product.jsp?product=1 & platform = Macintosh.

    I was told to download the Version 7.1.1. After I did it I had a window with a folder of files into it. I clicked the folder icon and got the Adobe Patch icon. I clicked once again and got a window with some of my apps listed. This window has had a message "Select the copy of Acrobat 7.0 Standard update." There was only one illustrates copy (I have only one copy in the Applications), and it was already pointed out in blue. I clicked on the button choose, but then got the message "an invalid application has been selected."

    It has been suggested that I have download the Version 7.1. I thought that Version 7.1.0 was what is meant so I downloaded that, but after completing the steps above, got the same message of invalid application. So I decided that the 7.0.1 Version should be the initial download must be installed, but I still get the message of invalid application.

    I try to install a proper way? All downloads are upgraded Standard - several languages.

    What the exact version you number or better yet do a screenshot of this window and Post so someone can decide the next course of action.

  • Windows XP has been infected with a virus/trojan via the net and will pop up window wanting to access the app tray and Windows install wants to work.

    Original title: tray app

    I have a PC with Windows XP. He has been infected with a virus/trojan via the net. I can't access the net, but I have now access to readers of DVD and CD. On the screen is a window who want access to the application of the status bar. I don't have a restore date prior to infection. Installer Windows guard eager to work. How can I get going again and remove the virus/Trojan? I also have a laptop with windows vista. I can download MSE on my laptop for windows XP and copy it to a CD and then use it on the PC?

    Hi shanethornton,

    You can try to download Microsoft Security Essentials from the link below for a CD or a USB key and try to run it on the infected PC and check out them.

    See the link to download Microsoft Security Essentials:

    http://www.Microsoft.com/security_essentials/?WT.srch=1

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • I have Windows 7 and I am unable to back up files. The following message appears: "the task image is corrupt or has been tampered with.

    * Original title: ease of backup Windows 7

    I have Windows 7 and I am unable to back up files.  The following message appears: "the task image is corrupt or has been tampered with.  I used an ERD without result.  The application discovers not a problem.   At the same time, I received a message that the Bitlocker system files could not be found.  I tried Windows 10 briefly then back to Windows 7.  That's when I started getting the message image corrupted

    Although many people have problems when back to Windows 7 after trying 10 Windows, before you reinstall Windows 7, you can consider the rest of the steps here--> https://support.microsoft.com/en-us/kb/2305420

  • The MAF project has been configured with an unsupported JDK

    Hello

    I am facing problem in jdevloper for implementation of the MAF. I have provided the JDK 1.8 version. But it still gives the following error.

    'D:\Jdev ADF Home\mywork\MyMobileApp\ApplicationController\ApplicationController.jpr' project has been configured with an unsupported JDK.  Make sure that the "profile 2 Compact MAF JDK 1.8 & quot; is used.

    Type or a variable 'oracle.adfmf.application.LifeCycleListener' not found.

    Jdev Version: Studio Edition Version 12.1.3.0.0

    Extension of the MAF: 2.1.0.0.41.150115.1352

    Please suggest me to fix this problem.

    Thank you

    SAN

    Simply change name Java SE 1.8.0_40 to the MAF JDK 1.8 Compact 2 profile

    I guess it will solve your problem.

  • Check that this class has been marked with the annotation @Entity

    Hello


    We have a level of the shared lib App that makes all the APP associated with request for an application. And each application can use the lib goes to get the related JPA query to do.
    To define the scope of the Joint Parliamentary Assembly between App. We have created the EMF for each application.

    When an application to run and any associated APP action that it works fine, but when trying to run a second application we are seeing the following error message when you try to do a specific action JPA.


    the @Entity annotation.
    [2012 05-23 T 04: 08:16.839 - 07:00] [WC_Spaces] [ERROR] [] [oracle.webcenter.spaces] [tid: [ASSETS].] [ExecuteThread: '3' for the queue: "(self-adjusting) weblogic.kernel.Default"] [ecid: 5825b814-2931-4ad5-8dc3-3e18f66992b7-00000004,0] [APP: webcenterCustom] []
    java.lang.IllegalArgumentException: unknown entity bean class: oracle.webcenter.spaces.internal.repository.WcSpaceHeader class, please check that this class has been marked with the @Entity annotation.
    at org.eclipse.persistence.internal.jpa.EntityManagerImpl.find(EntityManagerImpl.java:648)
    at org.eclipse.persistence.internal.jpa.EntityManagerImpl.find(EntityManagerImpl.java:532)
    at oracle.webcenter.spaces.internal.repository.SpaceRepositoryUtils.refreshSpaceRows(SpaceRepositoryUtils.java:1791)


    Where WcSpaceHeader is an entity.

    To create emf by App, this is the code


    private static EntityManagerFactory getEntityManagerFactory()
    {
    String appName = Utility.getApplicationName ();
    EntityManagerFactory emf = sEntityMgrFactory.get (appName);

    if(EMF==null)
    {
    EMF = Persistence.createEntityManagerFactory ("SpacesReposPUnit");
    sEntityMgrFactory.put (appName, emf);
    SpacesConstants.LOGGER.info ("Caching" +)
    ("EMF for" + appName);
    }

    return of the emf;
    }



    My persistence.xml

    <? XML version = "1.0" encoding = "US-ASCII"? >
    < persistence xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance".
    xsi: schemaLocation = "http://java.sun.com/xml/ns/persistence http://java.sun.com/xml/ns/persistence/persistence_1_0.xsd".
    version = "1.0" xmlns = "http://java.sun.com/xml/ns/persistence" >
    < name of persistence - unit = "SpacesReposPUnit" transaction-type = "RESOURCE_LOCAL" >
    <>provider
    org.eclipse.persistence.jpa.PersistenceProvider
    < / provider >
    oracle.webcenter.spaces.internal.repository.WcSpaceHeader < class > < / class >
    oracle.webcenter.spaces.internal.repository.WcSpaceUsrDetail < class > < / class >
    oracle.webcenter.framework.service.jpa.WcCommonXlationEntity < class > < / class >
    oracle.webcenter.spaces.internal.repository.WCNavigationActivity < class > < / class >
    Properties of <>
    < name = "eclipselink.session.customizer property"
    value="Oracle.WebCenter.spaces.internal.repository.SpacesEclipselinkSessionCustomizer"/ >
    < / properties >
    < / persistence - unit >
    < / persistence >



    Another problem I see in this is that. When I create an EMF EM, (which is different for different app) and do a query, I get a class cast Exception.


    [(self-adjusting)'] [ecid: 5825b814-2931-4ad5-8dc3-3e18f66992b7-00000004,0] [APP: webcenterCustom] []
    java.lang.IllegalArgumentException: unknown entity bean class: oracle.webcenter.spaces.internal.repository.WcSpaceHeader class, please check that this class has been marked with the @Entity annotation.
    at org.eclipse.persistence.internal.jpa.EntityManagerImpl.find(EntityManagerImpl.java:648)
    at org.eclipse.persistence.internal.jpa.EntityManagerImpl.find(EntityManagerImpl.java:532)

    It is a problem of class loader, somehow you have deployed the same classes in two places, have two versions of the classes.

    How, exactly made things, where are your domain classes?

    The questions is more likely that,
    Persistence.createEntityManagerFactory ("SpacesReposPUnit");
    always returns the same plant once it has been deployed.

    If you pass a map properties for createEntityManagerFactory and set the property "name eclipselink.session" a single value, then you should get a new plant.

  • Someone broke into my computer informing me that he has been infected with malware, viruses, etc. and advising me to contact a phone number, also send me a live conversation on how to solve the problem. He claims to be an Apple / Safari servic

    Someone broke into my computer informing me that he has been infected with malware, viruses, etc. and advising me to contact a phone number, also send me a live conversation on how to solve the problem. He claims to be an Apple / Safari servic

    This kind of message is a scam. Do not meet it.

    Force Quit Safari, then restart Safari while holding the SHIFT key.

  • My air macbood has been infected with the criterror virus. How to disinfect?

    My MacBook Air running Yosemite has been infected with the criterror virus. Does anyone know how to disinfect? I am currently using Windows Parallels Online.

    The WHO says?

  • How can I find what version of iTunes has been used with my iPod.

    My computer with the installed iTunes died. I tried to load iTunes in my new computer, and then use it with my iPod and I get the error message that another version of iTunes has been used to record music on my iPod.  The new iTunes wants to erase everything on my iPod and start over.   Is the only place in all the songs I have on my iPod so I don't want to erase it and start over. I need to know what version of iTunes has been used with my iPod, the last time that I've updated so that I can download the version of iTunes and my iPod allows to recover all my songs in iTunes.   In turn if there is a way that I can download all my iPod songs in a folder on the computer and then reload them in iTunes.

    That is to say that a different library was used. The version is not really relevant. If your old computer and new were both running the same version you'd still see the same message unless you have migrated your library or restored a backup. See recover your iTunes from your iPod or an iOS device.

    TT2

Maybe you are looking for