Cloning Windows XP Pro to new Hard Drives part 2 (Sysprep.exe)

As you can see, there is a new facet to my original question "cloning Windows XP Pro for new drives (ready to use to backup discs)". ".

Through research, I found some information about "Sysprep" which paved the way for many other questions.

(1) once my OS is installed and configured the way I like it, it is wise to do a disk with Sysprep image before using software such as Seagate DiskWizard to deploy on the other drives?

(2) I use WinXP Pro-Retail, updated with Service Pack 3, I typed Sysprep in my Menu/Run dialog start and it is said that Sysprep will not find on my system.

Sysprep needs to be downloaded and installed?     If this is not the case, how do you get?

Hi EtherStreams,

Thanks for posting. The sysprep you're looking for files on the XP cd in which you have you installed the system. The link below shows the detailed procedure to use the utility. Please let me know if you have any additional questions.

http://support.Microsoft.com/kb/302577

Shawn - Support Engineer - MCP, MCDST
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think

Tags: Windows

Similar Questions

  • How to install Windows 7 on the new hard drive?

    I changed the old hard drive (500 GB) with a new hard dirve (1 Tera) and now I have two problems:-

    1. how to install Windows 7 on a new hard drive?

    2. my laptop came preinstalled Windows 7 Pro, but all the DVD kit (disk reclaimer Application & discs) + Revocer operating system, which has been provided (by Lenovo) for the laptop is in the Windows 8 Pro. So, how to install Windows 7 Pro, my laptop while all the DVD sets are in Windows 8 Pro?

    either way, this is my laptop spec (for reference); -

    * Note *.
    I intend to install Windows 7 Pro on my new hard drive using another DVD of Windows 7 (not DVD provided by Lenovo), but how do all Leveno program located in the disk 'Application & recuperator readers' (by example; - Lenovo system health and Diagnostics, Lenovo Power Control, Lenovo Fingerprint Reader) to install this hard drive? (as I told you before, all the DVD kit is at or only for Windows 8 Pro)

    I hope someone will help me answer my question,
    Thank you

    I found the solution.

    Response to question 1; using a recovery & backup software to clone my current operating system, and then transfer them to my new hard drive.

    Response to question 2; Download all drivers and software (all the application that located on the DVD of the kit I have) on the official website of Lenovo.

    or another solution, send to a computer service shop and let the experts (workers) install it for me (the most simple and sure way).

  • How to put Windows 7 on the new hard drive without boot cd? How will I know if 32 or 64 bits? This computer yourself running windows 10?

    * Original title: windows 7 download

    I have a laptop dell M4400 with windows 7 pro OA. HARD drive crashed and I replaced with a new one. How to put Windows 7 on the new hard drive without boot cd? How will I know if 32 or 64 bits? This computer yourself running windows 10?

    It has probably comes with Windows 7 Professional 64 bit.

    You can download a copy of Windows 7 Professional using the following instructions (update of Microsoft recovery software supports downloads with the COA key):

    How to: What are my options for Windows 7 reinstall media?

    Make sure you scroll down and read the section:

    What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

    You can also use Windows 10 too as you have the right to it as a free upgrade:

    • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
    • Reboot several times, and then try again.
    • Disable the general USB peripherals (for example - smart card reader).
    • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
    • Perform a clean boot, restart, and then try again.
    • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
    • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
    • If this does not work, try using the. ISO file to upgrade if possible.
    • If you are connected to a domain, go to a local account.
    • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
  • Install Windows 7 on the new hard drive with USB operating system recovery?

    I have an Alienware 2015 15 which does not come with a CD player. I install a new hard drive (SSD 2280 m2), so the question is how to install WIndows 7.

    While Microsoft offers an OS IOS for WIndows 8 download that you can put on a USB (with dell, I think that it automatically pulls the product key of BONE off the coast of the motherboard?) this IOS download is not available for Windows 7.

    So the question is the recovery USB OS offered by dell will allow me to do a fresh install of Windows 7 on a new hard drive in the laptop even USB from recovery of the BONES came with. My last resort is to buy a new copy of windows 7 and a USB external CD/DVD drive.

    TLDR: OS Recovery USB offered by dell will install Windows 7 on a new hard drive.

    The factory restore USB will work on another drive. I did this procedure with the media created from the latest version of Dell backup and restore on my Inspiron 13 7347 and demonstrated the creation of media and installation on a new SSD:

    http://dellwindowsreinstallationguide.com/Dell-backup-and-recovery/

    Since you are using use Alienware Alienware Respawn. Alienware respawn is very similar to Dell backup and restore.

  • I install Windows 7 on a new hard drive, but the installation gives an installation message could not create a partition or locate an existing partition.

    * Original title: installation of windows 7

    I install Windows 7 on a new hard drive, but the installation gives an installation message could not create a partition or locate an existing partition. Why installation does not create a new partition.

    Try the following

    Boot from the Windows 7 DVD

    Click Install now

    Accept the license agreement

    When the option is displayed to select a type of installation, click (Custom advanced)

    Press SHIFT + F10 from your keyboard

    type the following commands

    DISKPART

    Press enter

    the list volume

    Next, you select the volume where you want to install Windows 7

    Type: select disk #.

    # represents the number of the volume

    Type: clean

    convert mbr

    create the primary partition

    assets

    format fs = ntfs quick

    output

    output

    Try to reinstall.

  • Impossible to reinstall Windows 7 on a new hard drive

    First off apologies if this has been answered recently, I spent the 2 days on this problem and the promise that I searched and google til my fingers bleed. Basically, the situation is as follows:

    -The PC tells me HDD is faulty on my Studio XPS 8000

    -J' I buy the new HDD, then get out of the old and install new

    -Position the disc of the PC operating system, get up to where I can click on install to start the installation of Windows 7 on the new drive

    -However he says there is no device driver on the disk, I put in the drivers and Utilities disc, (which came with the PC) but still no driver of the device, even if it says disk they appear thereon

    -Back to the old drive and try to make the system recovery disk - try to use USB flash drive but is not recognized, so buy dvdr discs and go through initialization and then it begins to collect files, but on many tests is not go beyond 25% full, let alone engraving on the startup disk.

    -Dell Datasafe Local Backup to uninstall and reinstall but the continuous PC to freeze at "25% collection files.

    So, what can I do, because my warranty is over? All I have to do is install my copy already purchased WIndows 7 on my new hard drive already bought, but I'm stumped at this point. Thanks for any help of cutting-edge :)

    Oh... PS. -I am in England so I don't think I can send away from the backup disks, even if the expiry of the guarantee is not a problem.

    Follow the Windows reinstallation Guide / A clean installation of Windows 7:

    http://dellwindowsreinstallationguide.com/

    The part you get stuck on is step 6, preparation of step 8 and SATA drivers loaded during the installation of Windows.

    Note that I recommend using a .iso of Digital River, which will be the installation of more up-to-date media and the use of Activation and recovery of backup for the activation of the product. Follow the step 2 (using the files at the bottom) and stage 11 b for activation of the product. It is an unofficial solution but works very well.

    You can of course try to call Support technique Dell and request a Dell Windows 7 with Service Pack 1 DVD of resettlement.

  • Re: Satellite Pro A300 - recovery disk will reinstall Windows OS on the new HARD drive

    Hard drive of my Satellite Pro A300 failed. It has now been replaced. I ordered a recovery disk.
    This will allow me to reinstall Windows Vista OS that is installed initially?

    Also, I get this message "BOOTMGR MISSING". The recovery disc will fix this problem too?
    Thanks in advance!

    > I ordered a recovery disk. This will allow me to reinstall Windows Vista OS that is installed initially?
    Yes. Without a doubt.

    New HARD drive is recognized correctly in the BIOS settings?
    If so avoid any problem.

    Moreover, A300 works perfectly and much better with Win7 32 bit.

  • transfer the copy of windows xp on a new hard drive

    My 6th sense tells me that my hard drive is about to fail.  I want to clone this HARD and then replace it with the new clone HARD drive.  Copying valid OEM xp (xp Home Edition, SP3) on my current HARD drive, failing will transfer without problems for the new HARD drive so that when I replaced the current HARD drive with the new and turn on the computer, it starts straight upward as usual?  Thank you.

    At the start of my hard drive makes strange noises, I used the program Norton Ghost 2003 disk cloning my XP Pro, SP3 hard disk. I used the switch of ib (boot image) when I did and when I started the cloned disk was not disabled. Windows found new hardware (the player) and after a little while that I should restart. I clicked the button to do it and everything was fine, then.

    Note: I bought the retail version of the Ghost of Norton program. It is not a free software.

  • Windows 'Easy Transfer' to new hard drive?

    I have a desktop computer Inspiron 530 with XP Pro and you need to install a new hard drive.
    My question is can I install the new hard drive in the empty under my old hard drive, plug it in and run Windows Easy Transfer directly from my old HDD to the new HDD? Then I could delete the old and move a normal nine until the slot C:\.
    Or, what I have to do it with an external media such as a USB device?

    Windows Easy Transfer can read files in Windows XP, but may not restore on Windows XP.  And no, you can't run it on a disk that is installed, but not on Windows.  Anyway, the answer is no.

  • Dual Boot with windows XP Pro with 2 HARD drive, error on secondary windows install: "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check boot path and disk hardware... »

    Hi, I recently bought a new Hitachi 1 TB internal hard drive. I wanted to do a clean install on the new drive (d), be able to dual boot my computer and leave my old 300 GB disk (C :) as the primary windows installation. After physically installing the new HARD drive, I noticed that "new hardware found" and the the brand name flashed in the bottom right corner. I thought I'd see the new hard drive in my computer, but I did not. I initialized the new HARD drive with the computer management window (right click on my computer - manage) and I also formatted in NTFS (I had to change my printer hard drive letter to assign the new HARD drive with the letter D, but I've made other changes after this step). Now, I could see and use in my main windows on the C: installation. I then installed a windows new copy XP pro with the installation CD I got for my C: but on the D: (Note: I have a Dell computer (and the Dell reinstallation CD) and my current version of windows has SP3 while the installation CD is only SP2) (I also reformatted my HARD drive during the installation of windows to NTFS)

    Now when I try to start on installing the new on my D: I get "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check startup disk and hardware access path. "and another line saying to refer to manuals HARD drive and windows.

    My Boot.ini file at this time was:

    [boot loader]
    Timeout = 5
    default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
    [operating systems]
    "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
    "signature (ac516a5c) disk (0) rdisk (0) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

    I looked towards the top of this help page, but for now I'm unlucky:

    http://support.Microsoft.com/kb/314477

    (The next steps I took by throwing from the Windows CD and go into the repair console)

    I tried to use the bootcfg /rebuild but the line to boot.ini for my secondary HARD drive still does not work.

    He gave me something like:

    [boot loader]
    Timeout = 5
    default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
    [operating systems]
    "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
    "signature (ac516a5c) disk (0) rdisk (1) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

    I also tried to change the signature() to multi (0), but it did not work. (or try almost all possible permutations of disk() and rdisk() partition() 0 to 2).

    I also tried to use expand F(dvd-drive):\i386\ntkrnlmp(I_have_a_duo-core).ex_ D:\windows\system32\ntoskrnl.exe and a few other combinations, but I when I login as D:\windows simply, it fails to extend with a message like "could not develop" or C:\windows I get "restricted access".

    I have not yet tried CHKDSK/r, but since I did a clean install on a newly formatted drive... I don't think it would work.

    I've also marked the partition on the D: as active (in computer management), but it did not help me.

    I've done a first installation of windows repair, strangely, I couldn't fix this one... Still does not work...

    My default windows installation yet works very well & I see that windows has been installed on the D: but I'm ideas from how to operate the dual-boot, can someone throw me a BONE on what to do?

    Maybe try to do something with the Boot Manager (whatever it is?) Create a new partition and use it as a boot manager? I don't really want to do this, because if I made a mistake I will be unable to use my computer and dual boot should work without going through all this trouble... But I found this page: http://technet.microsoft.com/fr-fr/library/ee829686%28WS.10%29.aspx

    Could a clean install two HDD help? I hope I won't have to do...

    Someone has an idea?

    PS: I'm not such an advanced user so I need a solution step by step, thanks!

    Edit: I also noted that I can't see my new HARD drive in my BIOS... weird... SATA-0 is my old drive HARD 1 and 2 are my dvd 3-5 readers are 'off' and it doesn't seem to be anything that it is plugged in. I also have 4 bays for internal HARD disks. Now, 2 are busy.

    Edit2: I looked inside my case and enabled the good Sata in the Bios after a reboot it detected the drive correctly. Dual boot doesn't always work well... The fact that it was disable in the BIOS while I was installing the new HARD drive could change anything? Hmm...

    In case I wasn't clear enough: I had a windows XP Pro installed on my C:, bought a new hard drive and installed the same copy of windows on it (d). I think that should allow me to double boot between the two installs different. Even if for some reason I can't boot from one on my D:. Andrew, I do not understand why you so far physically disconnect the other drive, the point of the whole operation is to build a boot.ini file so that the BIOS knows that it y facilities 2 windows and you allow to choose (and not have conflicting problems between the 2 systems), someone correct me if I'm wrong? "Expand" the part of my first post made reference to one of the solutions provided by Microsoft in the first link that I have included in my previous post (but I can't seem to work).

    In addition, it is the procedure that I followed: http://www.ehow.com/how_5950826_boot-two-different-hard-drives.html

    (except I've had the first installation already done).

    Andrew "also, once a new hd is plugged on the pc & running, most of the BIOS will place (them) as 1st priority hd, set the BIOS to do this", you mean that by installing separately from windows on each unit when the other is not plugged in, I could choose what disk to start from defining their priority in the BIOS once they are all plugged back? It's too tedious (as I intend to move frequently between the 2 installs) and requires a computer to other users of the lack of computer knowledge. Unfortunately, it is not a viable option.

    EDIT: I DID IT! Hmmm... Well, I double checked in the recovery console, the path of the new HARD drive with the arc command Scan. Tried to start again with the MULTI (0) in my boot.ini and it worked... I also had my windows install CD in. Maybe that is why I could not start, windows needs the CD to complete the installation? Weird, I don't know what I did to the difficulty it... but hey, it works! Thanks for your ideas guys!

  • Dell Inspiron 3520 - hard drive failure - how to install Windows 8 on the new hard drive

    I bought Dell Inspiron 3520. My hard drive has stopped working completely. It was stated as dead hard drive by diagonstic center.

    I have now bought a new hard drive but have lost data and windows 8 preload on the original hard drive. Dell did not provide any recovery disk for Windows 8 pre-loaded on portable hard drive. How can I then install windows 8 / 10 on my new hard drive?

    The .iso image file official 10565 has only:

    • Overview of the House of insiders
    • Overview of the Insider Pro

    Unfortunately, there are 5 editions of Windows 10 and so 3 are missing. If your key is not automatically entered and accepted, it's probably a simple language edition or edition N.

    When Microsoft release 10586 - TH2 - 1511 Version they will probably have an .iso that contains all 5 editions in 1 .iso or alternatively 5 .isos distinct (I hope as the first case that it will make Windows installation much easier).

  • Satellite Pro 2100 - new HARD drive is not booting

    Hello
    I wanted to update my SP2100 with a WD1200BEVE. (120 GB of WD).

    Copy of disk via USB + speakers worked, but after changing the disc nine does not start: the laptop hangs up with blinking cursor.
    Already checked that the partition is active and even a new installation from a CD of XP has the same result! The BIOS seems to accept the drive (if not installing via CD should have failed) so where is the problem?

    Any tips?

    Hi Kannengiesser,

    Which is really strange that you can t start up disk even it s recognized in BIOS correctly...

    You have the Toshiba Recovery disk? If so, you can try this disc factory settings. If it works, it was just an installation problem.

    But I couldn't imagine also that the new HARD drive is not working properly last week I had a similar problem. Made a HARD drive upgrade, but a few days later Windows didn't start because the HARD drive had a bad sector, now I'm waiting for a replacement drive.

  • Acer recovery disks do not install Windows 7 on a new hard drive SSD

    Hi all!

    I have Ace Aspire 5742 G laptop and I have problems to install the Windows 7 operating system on my new hard drive SSD (I bought the SSD because the original hard drive is defect and do all the time... blue screens)

    For the factory restore, I use the restore disks. I burned the discs a few years back when the laptop has insisted me to do (using eRecovery or something, in total 3 dvds).

    Testing of computer to install the operating system with the DVD (asked to insert a dvd and then press a key). The real problem is that the installer will just in loops, restart and eventuallyfreezing in the end...

    Restart--> Acer--> Windows logo takes over... files-> from windows-> reboot-> etc.

    Which continued for more than an hour (on the first dvd!) and all of a sudden that it froze right on screen "starting windows..." I had to restart and stars on again once.

    I can still use my old formatted HARD drive, should I do the new set of recovery disks or use a USB?

    Thanks for the answers in advance!

    FR.
    Barbarian90

    I was not able to edit my previous post, so I'll make a new...

    So I thought (with the help of Google) that the problem was that I had installed the new DDR3 memory game. When I changed them back to the original ones (2x2gb) everything worked smoothly.

    anyway. Thanks for the help!

  • No boot disk found during the installation of windows 7 in the new hard drive by using the original recovery disk

    Hello

    My laptop is HP - Pavilion dv6 2165-tx. My old hard drive damaged and so bought a new one.

    New hard drive works fine. (He went from main hard drive test)

    Now, to install the operating system, when I insert the recovery disc in my CD, I get the error message-"no boot device press a key after the insterting startup disk."

    How can I go about this now?

    Thank you for your contributions.

    I've installed windows 7 using my recovery disk. Problem is that my objective optical drive was not clean, which resulted in the error.

  • windows xp OEM on new HARD drive transfer

    I have Windows XP OEM with key number, but no original record has been received. How can I transfer OS to a new larger HARD drive?

    Thanks for assstance.

    Many hard drive manufacturers provide an application of free software to do this.  Visit the web site of the manufacturer of the new hard drive and maybe you'll find a.  For example, Western Digital offers their free Acronis True Image WD Edition software for use with their hard drives Western Digital. Seagate offers their free Seagate DiscWizard for use with Seagate hard drives.

Maybe you are looking for