Close all files in sequence

Similar Questions

• close all files

  I have been informed before launching "detect and repair disk errors, I have to close all the files. How I have this and I turn off the wireless network connection as well?

  If you are talking about this article (or something similar):

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/app_disk_logical.mspx?mfr=true

  If you decide to perform an operation that can only be carried out or completed when all files are closed, XP invites you to schedule the operation at the next startup of XP.

  If you answer Yes, XP will run the operation during the next restart before things like your desktop or other applications load upward.

  If that's what you're going to do, when the drive to check the operation is complete, you may be curious to know the results.

  When chkdsk runs automatically restart either because XP thinks he needs to (perhaps your NTFS volume has been marked as dirty) or you have chosen to do it yourself, the results appear in the viewing Application event log.  You should look there for the chkdsk log and no problems after running chkdsk.

  To view the logs in Event Viewer, click Start, settings, Control Panel, administrative tools, event viewer.

  A shortcut to the event viewer is to click on start, run and enter in the box:

  %SystemRoot%\system32\eventvwr.msc

  Click OK to launch the event viewer.

  Search the Application log for an event originally by Winlogon, something like:

  Event type: Information
  Event source: Winlogon
  Event category: no
  Event ID: 1001
  Description:

  Checking file system on C:

  The type of the file system is NTFS.
  A disk check has been programmed.
  Windows will now check the disk.
  39070048 KB total disk space.
  25151976 KB in 78653 files.
  48256 KB in 10264 index.
  0 KB in bad sectors.
  237080 KB in use by the system.
  65536 KB occupied by the log file.
  13632736 KB available on disk.
  Windows has finished checking your disk.

  If you see errors - same errors that are corrected, re-run the operation (such as chkdsk/r) until you see no error.  You should have no errors.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Close all files at once?

  After that you edit a picture in any version of the EP and the save for web a box appears that asks if you want to save it before closing (already saved once). I often have 65 files opened and edited and will not accept does not save for everyone. Does anyone know how to close them all at once short of turning off the computer?

  Here's the script:

  https://Acrobat.com/#d=VaF9k1kNWBBOHLuSWDjVfA

  How to install:

  1. download and unzip

  2. right click on the script and choose copy

  3. go to C:\Program Files (x 86) \Adobe\Photoshop elements 9\Presets\Scripts

  4. right click in an empty space in that folder and choose Paste

  5. start or restart PES 9 and the close all no. Save script should be listed under file > automation tools.

  When your done with all of your open pictures, go to close all Save No. (click on the name) and open all your documents would end without asking.

  It will take awhile to close all documents, so give it some time to complete.

  

• Update all files in the new version of Framemaker book

  I inherited a Frame 8 book with many files, is it possible to update all the files in frame 11 in just a few steps? Could this be in ExtendScript?

  1 open the book file.

  2. button Shift and then select file > open all files in book

  3. treat warnings/errors that come up to the top (you can turn off reminders on the opening of an older version)

  4. to emphasize in the book file.

  5 switch speeds, and then select file > save all the files in the book (this will save in FM11 format)

  6. move speed, and then select file > close all files in the book.

  7. save the book file (it must be converted for FM11).

  Fact.

• FM crashing when it formats import / closes several files in a book

  FM hangs EVERY time it closes several files. I first noticed this problem when I tried to import the formats through all the files in a book. It would work for less than 10 seconds, and then it will disappear. My theory is that the accident occurred at each closing several files FMis and it makes sense (to me) because it seems that FM opens and closes each document in a book when the formats are imported in all of the files in a book.

  I first noticed this crash once I had changed several settings in an existing address to change the way the pages are numbered in all of the work (management wanted to change to a 'constant' numbering system from the first to the last page of the book to a relative numbering system where numbering begins with each chapter). I do not remember the specific changes I made when I got this crash, but this accident has been constant since this point.

  It is played like this...

  1. I select all the files in a book and select file/import/Formats.

  2. I click on apply, then I can get a few 'cannot Ωtre annulΘe' alerts regarding the undo history.

  3. then the accident occurred and I get the following alert from Windows...

  

  4. my solution was to open all the files in the book and then import formats. This does not create an accident; HOWEVER, the same accident will happen if I try to close all open at the same time by selecting files, right-click and choosing Close.

  5. it's really impact my workflow because the only other workaround to avoid a crash is to close each file separately, and it's extremely frustrating, especially when I'm dealing with a book that contains 60 files.

  I am a relatively new user, and I'm certainly not the more technical user in this forum. I use Windows 7 and FM 11.01.382. I searched on the internet several times and I have not found this topic, and I'm sorry if this is covered elsewhere.

  Thanks for any help!

  Instead of selecting all the files in the book, have you used them open all the files, options, save all files and close all files at the level of the book? In the book file, just hold down the SHIFT key before clicking on the option of the file menu and you should see the options "All".

• I can do something that would cause all the new sequence files to have the same local variables?

  I would like to add local or drop some variables global to all the new sequence files I create. I was hoping that I could simply add the variable to the process template and make it appear whenever I created a new sequence or in any order who have used this process model, but it doesn't seem to work.

  Does anyone know a way to do what I'm doing?

  Thank you.

  Skeptic,

  If you use TestStand 4.0 and later versions, you can create a sequence model by adding a sequence selected in the models pane of the TestStand sequence editor.  You can then use this template to create all your future movies.  Once you configure the model you like you will be easy to reuse this sequence skeleton again.

• Firefox closes all my tabs on stop and do not open them again when I restart, how to fix?

  When I shut down for the day, Firefox close all my tabs and not resume at startup. I get a message asking if I want to close all tabs. How do I keep my firefox tabs? I have Windows 7 if it's of any help. And I'm in Firefox v 26.0.

  In case you use "clear history of Firefox closing:

  • do not erase browsing history
  • Tools > Options > privacy > Firefox will be: "Use the custom settings for history": [X] 'Clear history of Firefox closing' > settings
  • https://support.Mozilla.org/KB/clear+recent+history

  Note that compensation "Preferences of Site" clears all exceptions for cookies, images, windows pop up, installation of software and passwords.

  Use "Firefox > output" (Windows: Firefox/file > quit;) Mac: Firefox > quit Firefox. Linux: Firefox/file > exit) to close Firefox if you are currently doing by clicking on the X close in the title bar of Firefox.

• Help with work VI to not to close all instances of Excel

  I have a VI that I found on the Web site of NOR.  It looks an excel file, in a specific cell, etc. 'A1' and refers to what is in this area of the cell.  Then it closes the file and Excel, including all other workbooks.  Can someone help me change this so that it will close only the workbook that was opened by the VI?

  HAHA, don't worry, I got it thanks buddy.

• Write/close text file problems

  There is probably a simple answer to this question, but I can't seem to understand.

  I'm using a controller compact realtime RIO 9068

  I have a program very simple reading of data from a serial port and saving it to a text file.  Before recording starts, I call the function open/create/replace file, then I start reading the port, and I run the function "Write to a text file" whenever I get a certain number of bytes from the serial port.    Everything works fine if I use the program as planned, I press the Start button to start the recording of data and then press the stop button to stop the recording, who runs then the function "close file".  I get a well recorded transcribed text file and all is right with the world.

  This application is intended to save the data for hours unattended, if I want her to be robust for a power failure.  If I pulled the power so that the data connects, I always get the file on the hard drive, but is 0 bytes is no in.  It seems that if I don't run the IA function to "close the file" nothing is saved.  I am confused because I thought the closing of the record vi relases only the file of labview control and don't actually nothing to write to the file.  Anyone have any ideas on what is wrong?

  I'll post photos of the code, but its on a machine of lab that is not connected to the internet.

  Discover the function Flush file in the Advanced queue Functions menu.  Following is the help file for this entry:

  Writes all buffers of the file identified by refnum the disk and update the directory of the file associated with refnumentry.

  The file remains open and refnum remains valid. Data written to a file often reside in a buffer until the buffer fills, or until you close the file. This function forces the operating system to write data from the buffer to the file.

• Why have I not to close a file refnum after doing a file before a file of reading and writing

  Looking at the example of read-write text file I noticed on the Refnum case after making the text file write she closes the refnum and to read the text file opens again. Why must you close and reopen?

  Why can´t you use open file with the option create/open with read/write access, write to the file and then read it (and close the reference only after doing the reading? I try to do it but I Don t get all the data when I read from the file...

  OK, I assume you mean case #1 in the example I have just mentioned.

  If you do not close the file, you need to set the file position at the beginning before reading, otherwise it will read from the current position in the queue, which is after the stuff that you just wrote.

  (Re-opening and closing will be reset to zero position of ot, of course.)

• a kind of automatic update suddenly without warning started to close all the documents I was working on, rebooted and lost all the changes I had made in the past three hours

  I've worked hard for three hours in the middle of the night, made extremely dfficult work on several Word documents and Excel spreadsheets. at the same time - the kind of work that you can do if you're sure not not to be interrupted. All of a sudden a few (probably Windows) update began to close the files one by one, "don't turn off your computer" was the message.
  I waited. It restarts, but then I realized all of work my three hours had disappeared. The files are still there, but in their unchanged form. How is it you lose nothing if your battery runs out and you can restore the files, that you deliberately deleted, and there is a permanent record of each tiny websearch? However, Windows can come in the night and boldly to destroy three hours of irreplaceable forced labor without warning! I won't ever be able to replace it.

  Set the automatic update process so that you can control if the updates to download and install.

  And, as a general rule, always save files regularly while you work.

  HOW to: Configure and use automatic updates in Windows XP
  http://support.Microsoft.com/kb/306525

  How to configure automatic updates by using Group Policy or of registry settings
  http://support.Microsoft.com/kb/328010

  for Vista: http://windows.microsoft.com/en-us/windows-vista/Change-how-Windows-installs-or-notifies-you-about-updates

  for Windows 7: http://windows.microsoft.com/en-AU/windows7/Change-how-Windows-installs-or-notifies-you-about-updates

  Take control, adjust your settings in THE and save your work as you go along.

  TaurArian [MVP] 2005-2010 - Update Services

• Batch file to open all files in a folder, one by one and run a script.

  I'm looking for a batch file, to run a script on each file file in the folder and open all files in a folder in the path defined and close the file. How is it possible

  Anthony,

  I would have you post here for assistance more.

  http://social.technet.Microsoft.com/forums/en-us/home?category=windowsxpitpro

  We know if that helps.

• Is it possible to close all open easily programs?

  original title: IS THERE A SHORT CUT 2 CLOSE all OPEN FILES? __

  MY COMPUTOR SAYS THAT I NEED TO CLOSE ALL OPEN FILES AS IM OUT OF MEMORY...

  IS THERE A SHORTCUT TO DO THIS OR CAN SOMEONE HELP ME AS IM NEW TO A PAOLO THANX.

  I'm not aware of a shortcut 'universal' to close all open files, but check out a few ideas below:

  • If the files that you want to close are part of the same program (Word, or folders, files etc), they will be grouped in the taskbar. You can right click on the taskbar icon, and then selectclose all Windows.
  • I found that the CTRL + W is very convenient to close open tabs or even some windows such as Windows Explorer Windows, as well as the traditional ALT + F4 shortcut. In some applications (for example, Visual Studio), then CTRL + F4 closed a file opened without leaving the application.  When I have a lot of things to close, I use these soldiers to accomplish the task more quickly.
  • If minimize all work instead to close all windows, you can try the Windows key + "D".

• Error every time I close a file (could not apply the workspace because the file is not found)

  I get this message every time I close a file. All the fixes would be greatly appreciated.

  

  In addition, you can try to reset the Photoshop preferences to default.

  To re-create the Photoshop preferences files, start the application while pressing Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop settings file?"

  Kind regards

  Mohit

• Hello! I have problems with the Illustrator. Each of them is turning incorporated when I close the file.

  Hello! I have problems with the Illustrator. I link images, close the file, but when I opened again all the links is not respected and turn to the software! Linked images are PSD files, apparently without any problem. Anyone?

  Thank you, but the problem was simple: the box to save the file was with the option 'include linked files' and I do not understand. I never click on this option, but I discovered that my friend had clicked on this (we have both worked with the same campaign files).

  And as for the pdf compatibility, I thought this could be the cause of the problem and I have enabled sometimes and try to save it again, but it wasn't the cause. And Yes, the file remains much better with less than half the original size ():

  Thank you!