< CLOSED > USSD / Test Mode / Debug Codes

EDITED POST - DELETED DATA

I'm sorry, but you can't post it here. For many of these codes can brick a phone - most of this is not intended for most users.

Do not post similar articles.

Tags: Motorola Phones

Similar Questions

  • I see this watermark on my desk that says Test Mode Windows 7 Build 7601. My Windows 7 is genuine. Why am I seeing this?

    Test Mode Windows 7?

    OK, I see this watermark on my desk that says Test Mode Windows 7 Build 7601...  I tried to get help for this Microsoft response team, or what ever and, apparently, the guys do not understand what I was talking about...

    My windows is genuine, I ran the tool and he says real, I can't activate again cause the computer does not give me an option for.  The windows is already activated.   I tried to open cmd and do a command that is supposed to turn off test mode or something... and even though he says he managed the brand of water is always on my screen.

    Anyone know anything about this?

    Hmm not what I expected. you do not have any windows release candidates installed

    You can try this option to remove the watermark.
    HrOnline: 0x80072EE7
    I saw this in your diagnosis, but I don't think it's related to the watermark.
    I found this relative to this error by Christmas D Paton.
    HrOnline: 0x80072EE7: this error code means "Address cannot be resolved" this refers to the address of the activation servers or servers of Validation.  In plain talk, it means that your computer can not find the place, he has to go to activate or Validate. Usually, this is caused by a misconfigured firewall or a Proxy.
    Which depletes what I know on the subject.
  • Help, please! I paid already two months but on my desktop applications remain in test mode! On my laptop no problem...

    Help, please! I paid already two months but on my desktop applications remain in test mode! On my laptop no problem...

    The trialversions are now closed, so I can't use any program now. It's very urgent, because I need PS for my work!

    Help links they send me, does not at all...

    Can someone help me please...

    Hi Bram,

    Please check your host files:

    trialversions?

    I hope this helps.

    Concerning

    Megha Rawat

  • Identification of the disabled objects of Apps additional patches in Test mode!

    All,

    Could someone please share if there is an option to "identify additional invalid objects of creation while applying patches to applications in Test mode!

    EBS R12.1.1
    DB: 11.1.0.7
    O / S:Linux Red Hat

    Thanks for your time!

    Kind regards

    Srini Chavali wrote:
    Run this code before and after applying the fix - the difference is your answer.

    SQL> select owner, object_name, object_type from DBA_OBJECTS where status NEQ 'VALID';
    

    And it's already mentioned in the docs/links mentioned above.

    Thank you
    Hussein

  • GPU (Graphics Chip unit)-debugging codes

    When you download an update from third party (and of course out of the room) my mac showed white screen when I went to check on it.   After turn off and restart - Console showed cycle debug GPU - with a bunch of debugging codes and no way to interpret them.

    I think the screen saver may have caused the problem - to eventually try to start - at the same time my connection may have got it wrong - 2 things is going after the same resource at the same time.

    I use Opera as I'm on Snow Leopard with no way to get to the later versions of apple because they will not sell custom media commands.

    What model Mac Pro?

    What graphics card is installed?

    Maybe the graphics card has failed.

  • Predator XB270Hubprz stuck in the factory test mode?

    Hello!

    One of these beauties very recently for a price cut bought from an official dealer because she had been in for repair at Acer.

    It really works very well but it is a big trouble which I assume is a test mode factory than anyone repaired he forgot to turn off. The monitor goes from being full black/red/green/blue/white looping all the time, except if the computer is running, and I don't think it can go in mode 'sleep' either - when I turn it on the screen just instantly appear, no logo or anything (I have another one of these aswell of monitors to compare to).

    So my question is... How can I turn off this test mode factory? I'm guessing it's little order 'hidden' I need to press the menu buttons or something like that. I tried my best Googling but found nothing that worked for this monitor in particular

    Thanks in advance!

    If you google:

    xb270hu service

    the first 2 results are videos that explain how to enter service mode.

  • Microsoft Windows Build 6001 Service Pack 1 on top of the center of my screen and the TEST MODE on four corners

    After a call to technical support to connect a new printer, I now Microsoft Windows Build 6001Service Pack 1 on the top of my screen. TEST MODE is in the four corners. Technical support HP said it was easy to remove, but would not tell me how without purchase. I have Windows Vista. Can someone please? Thank you

    Type msconfig in the search box and press on enter.

    Make sure that the Normal startup is selected on the general tab and Safe Boot is NOT selected in the Startup tab.

  • Computer stuck on 'test mode' and is having problems of delay serious is not allowing me to repair my registry or even access.

    I have Windows vista home edition 32 bit and all of a sudden its stuck on 'test mode' and it only allows me to access my regristry editor or anything to do with regristry. If I am near him, it simply restarts the computer. This whole test mode is seriously lagging my computer, the CPU is really bad spiking constantly. Is there anyway that I can fix this? When it starts, I have to manually perform a new task to even run windows Explorer. as the bar of tasks and themes and other. So if there is anything that I can do, let me know. Thank you.

    I don't know how you could have accidentally in Test Mode, but here's how you are supposed to activate or deactivate the Test Mode: http://msdn.microsoft.com/en-us/library/ff553484(v=VS.85).aspx

    There is some experience about it in this article:

    http://blogs.msdn.com/b/ntdebugging/archive/2011/08/05/for-testing-purposes-only-and-other-desktop-watermarks.aspx

    It could be that it is a particularly nasty brand of malware. I have not heard of something like this before and do not know how you could go about fixing this short of reinstalling Windows. Even if it is maybe not enough if startup records were damaged. I hope someone else can help.

  • Targeted Read Test failed [error code: WHD16-CSB]

    I use a DELL Inspiron N530 desktop computer. Is my hard drive model: WDC WD2500AAJS-75VWA0 device. When I run a test of hardware of Dell Support Center. It showed the following error:targeted read Test failed (error code: WHD16-CSB)

    The unit has reported the following State: the previous self-test completed having the read element of the test failed.  The first default LBA value is 20750407 and the failure occurred after that the device was working since 23398 hours under tension. Failed (error code: WHD16-CSB)

    Please help me find a solution.

    The reader is 23398 market h years.  Thats 974 days or years 2.67.   If the drive is probably dying if not dead.

    Western Digital WD2500AAJS Caviar Blue drive is very common and inexpensive.

    The standard OEM warranty on these discs is 1 year and the retail warranty is 3 years from the date of manufacture if
    you do not have a retail receipt.

  • How to disable the test mode on Windows 7?

    Hello

    I read an article on how to get rid of the test mode on windows 7 and the suggestion was to download fixit from windows.  My problem is that the slider runs constantly and I can't click on anything to start the download.  Any suggestions?

    Hi Mona,.

     
    Thank you for visiting Microsoft Community.
     
    I understand that you have found a water test mode on the Windows 7 computer brand.
     
    Test mode is a mode that aims to install drivers that are not tested.
     
    For several build of windows 7, that this mode and disable this, you can follow the article below:
     
     
    To fix the rotating cursor around constantly please follow the suggestions below:
     
    This problem may be caused for the following reasons:
     
    Third-party applications.
     
    Temp folder is full.
     
    1. What is the number of brand and model of the computer?
     
    2 have you recently made any changes to the computer?
     
    To resolve this problem follow the methods below:
     
    Method 1: Clean boot
     
    Put your system to the clean boot state helps determine if
    any third-party applications or startup items are causing the problem. You
    need to follow the steps in the article mentioned below to perform a cleanup
    Boith
     
    How to perform a clean boot in Windows
     
    http://support.Microsoft.com/kb/929135
     
    Note: After troubleshooting, see the section "how to reset the computer to start.
    "normally after a boot minimum troubleshooting.
     
    Use this procedure to disable all the third-party application and Microsoft services will be activated.
     
    Method 2: Disk clean
     
     
    Following this article, you can delete the temporary files that is on the computer.
     

    Additional information:

    How to disable the "Test mode" message that is displayed in Windows

    Hope this information helps. For all other windows-related assistance,

    Do not hesitate to contact us and we will be happy to help you.

  • test mode windows 7 Build 7601 after installing sp1

    I just update my win7 to sp1. I have to make in windows update, but download sp1 on the MS site, of Windows6. 1 KB976932 - X 64 .exe. After completing the update, bottom right of the screen, there is a screen of water: test windows 7 Build 7601 mode. What it means? My win 7 is coming with the HP laptop. What is a Test mode?

    Test windows 7 build 7601 message down to the right Mode

    To turn off - see the instructions posted here: http://social.technet.microsoft.com/Forums/en/w7itproinstall/thread/d3a63127-bc5e-4014-aebe-67313f78a515

    To disable the test signature, use the following BCDEdit command:

    Bcdedit.exe - set off TESTSIGNING

    Note: After changed TESTSIGNING boot configuration option, restart the computer to make the change take effect.

    To activate the test signature, use the following BCDEdit command:

    Bcdedit.exe - set TESTSIGNING ON

    What is Test Mode and how to remove the watermark Test Mode in Windows 7
    http://www.thewindowsclub.com/what-is-test-mode-and-how-to-remove-test-mode-watermark-in-Windows-7

    J W Stuart: http://www.pagestart.com

  • How can I get rid of the tattoo "Test Mode Windows 7 Build 7600" after an upgrade of Vista with the package?

    Just upgraded Vista Home Premium to Windows 7 Home Premium with the version updated official (box set). Update went well, but I now have a "Test Mode Windows 7 Build 7600" watermark in the lower right. I entered the activation during the installation, and there is no section in the control panel to activate manually, so I guess the activation went well. How can I get rid of this watermark?

    You can deactivate the Test Mode by typing bcdedit/set testsigning in the command prompt.

    If the command above does not work, try:

    Open again (run as administrator) command prompt and type the following command:

    bcdedit.exe - set loadoptions ENABLE_INTEGRITY_CHECKS
    bcdedit.exe - set off the TESTSIGNING

    See you soon! Life sucks! Get used to it.

  • Groups CSA in Test Mode

    Let's say I have a host in 3 groups - , TestGroup, OtherGrp.

    By default, my host is in , I can't delete it. I have not all policies assigned to . Two other groups of policy.

    So now my host runs the rules of the other 2 groups. If I put in the test Mode, what happens? My host which will show its in Test Mode, because its inheriting it from .

    Is completely Agent in Test Mode? Test mode don't apply to the group that it is not enabled? So if my other two bands are not in test mode, the rules always normally, or is replace this parameter?

    If a host is in a group that is in test mode, all the rules that apply to the host are in test mode.

    A host can have rules in test mode and still have other rules to protect mode.

    Tom S

  • What is the test Mode?

    Test mode

    7 Microsoft

    Build 7601

    The above message appears on my desktop, after that my computer went through a series of adjustments.

    It has restarted, once again crossed the 15 updates and then this message appeared.

    What does that mean?

    What follows is largely of:

    This message appears because your computer is running in test mode. The test mode watermark can appear if the test signing mode is started on the computer. This test mode can occur if an application whose drivers are not digitally signed by Microsoft is installed and still in testing phase. Microsoft has added Windows test mode so that users can test programs without having to provide a certificate of authentication. The message that is mentioned in the "Symptoms" section is displayed in the lower right of the desktop when the computer is running in test mode.

    Microsoft has three methods recommended to remove this watermark.

    Method 1: Use Microsoft Fixit
    Method 2:
    1. Click Startand type cmd in the Search box.
    2. Right click on cmd.exe under programsand then click run as administrator.
    3. At the command prompt, type the following and press ENTER:
      bcdedit/set TESTSIGNING OFF
    4. Close the command prompt window, and then restart your computer.
    Note If this method does not resolve the problem, go to method 3.

    Method 3:

    1. Click Startand type cmd in the Search box.
    2. Right click on cmd.exe under programsand then click run as administrator.
    3. At the command prompt, type the following commands and press ENTER after each command:
      bcdedit.exe - set loadoptions ENABLE_INTEGRITY_CHECKS
      bcdedit.exe - set off the TESTSIGNING
    4. Close the command prompt window, and then restart your computer.
  • Windows 7 XP works in Test Mode... How to operate normally

    My system is running in Test Mode. How to operate in normal window mode? I tried the utility BIOS, but to no avail.

    Which is higher
    Ronald

    This is for Windows 7 or XP? Have you made any changes before it appeared?

    What is your problem? - http://support.microsoft.com/kb/2509241?wa=wsignin1.0

Maybe you are looking for