Closing lid on the use of the active battery put into hibernation. Closing lid that plugged while active put into hibernation but the computer wakes up right after hibernation mode ends.
I put my power settings to have the laptop Hibernate when I close the lid. On battery it hipernates and the computer turns off. When it is plugged in it hibernates and turns off, but after a few seconds, it wakes us up. I want it hibernates and shuts off when I close the lid. Am I missing a command/selection?
Read the info on sleep disorders in the tutorial above.
http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html
Also read this tutorial; as well as the 'related links' at the bottom of the links above.
See you soon.
Mick Murphy - Microsoft partner
Tags: Windows
Similar Questions
-
I have my black getit monitor and the computer does not respound after 2 mnts when I start playing games online
Hello
1. what operating system is installed on the computer?
2. what web browser are you using to play the games online?
3. don't you make changes to the computer before the show?If you use Internet Explorer, then I suggest you to try the steps from the following link:
The problems of games online using Internet Explorer
http://support.Microsoft.com/kb/2528246
Additional information:
Why my screen is black when I start Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7Solve game problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-game-problemsThe problems of the game performance
http://Windows.Microsoft.com/en-us/Windows-Vista/fixing-game-performance-problemsTroubleshoot display with Microsoft games
http://support.Microsoft.com/kb/263039 -
Fallout 3 stops working after the computer wakes from sleep
Since the games for Windows Live 3 is out, Fallout 3 has never been the same. He used to work at best my GfWL and now her nightmare. Recently, after that I quit the game and put my computer to sleep, Fallout 3 will stop working completely after wake up. I try to start it and I get them all is a cursor with a small blue rotating light. What is even more strange, is that my computer goes into a State of semi who no longer meet this point where programs and keyboard shortcuts no longer work, but I can browse my hard drive. I try control + SHIFT + ESC to see what the devil but that causes Windows Explorer to stop working. CTRL + Alt + Delete does not work either. No matter what I try, once I start Fallout 3 after the computer wakes from sleep, I can't do the task to the top manager and I can't use my computer. The only way to get it is to hit the reset button or turn off manually. Can someone please help to get rid of this problem?
Hi murphy449,
1. did you of recent changes on the computer?
2. the problem only happens when you start fallout 3 after the sleep mode?
3. are you able to wake the computer quits successfully sleep mode?
4. What is the version of Windows installed on the computer?
Method 1
I suggest that you manually download and install the latest drivers for display on the computer card and check if it works.
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
Updated a hardware driver that is not working properly
Method 2
If the previous step fails then I suggest that you try the clean boot procedure to check whether a third-party program installed on the computer is causing the problem.
To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See the link below to learn more about how to clean boot.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.
If the previous step fails then I suggest you check the observer after return with details and events for the cause.
What are the information contained in the logs of the event (Event Viewer)?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer
What are the information contained in the logs of the event (Event Viewer)?
http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
5ooo mouse MS does not recover once the computer wakes up from sleep
mouse MS 5000 does not restore after that the computer wakes from sleep.
OS vista.have to restart the computer for recooect mouse.
Hello
1. Since when are you facing this problem?
2. don't you make recent changes?
I suggest you to follow these steps and check if that helps:
Method:
Check allow this device to wake the computer includes a graduation.
Here are the steps:
1. click on start, type device manager in the search box.
2 Goto Device manager.
3. click on keyboard, it will display your keyboard, do a right click and goto Properties.
4. Select power management.
5 check allow this device to wake the computer.
Follow the same procedure for mouse, restart the computer and check if it works properly.Method 2:
Also, try to update the latest drivers for the video card and see if it helps:
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctlyFor more information, see this link:
http://support.Microsoft.com/kb/838398It will be useful.
-
Is it possible to convert the standard numbered list to the list that appears on the same line a right after another?
Instead
- Insert text here
- Insert text here
- Insert text here
This
1 text goes here, 2. Text goes here, 3. The text here.
This revised list can take multiple lines.
I use InDesign CC2014 - if that makes a difference.
the only way is to convert numbered in the text (select numbered list > ctrl (or right click) > bulleted & numbered lists > convert numbered text).
Then, with search - replace, you can change the paragraph returns in space (or in space by commas as in your example)
-
The computer folder is empty after the use of group policy for card readers
Hello
I used the Windows Server 2008 Group Policy to create network drive mappings. This works for most, but on some accounts, it caused the computer folder is empty.For example, the folder of the computer used to have my C drive, my drive DVDROM, my USB and some network drives. Now his absolutely empty.If I click on start and type in C: it correctly to the my C drive and shows all records.If I put in a UNC path, it will correctly here.So the problem is that nothing is displayed in the folder on the computer.I tried to completely delete the user account from the C: drive and connect to the domain again, but it is always empty.Thanks for the help.Hello
The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
Hope this information is useful.
-
I ran the twice successfully system restore, but that did not help. When a window is blocked, hit CTRL-Alt-Del shows an error message "failure of Security Options. I use Vista. Open windows on the desktop were often not well closed for months, but now the computer freezes as soon as I opened the first window. Busy circle is present. Mouse still works but can't do anything for files, etc.
Hello
1. don't you make changes to your computer, after which the issue started?
Follow these steps and check if the problem persists.
Step 1:
If it works in safe mode, I suggest that you can start your computer in a clean boot State and check if the problem persists.
Note: Follow step 7 to your computer as usual.
Step 2:
You can perform disk cleanup to clean unwanted files on the computer.
Delete files using disk cleanup
http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup
-
Sound glitches after the computer wakes from sleep or Hibernation
When I first turn on my computer, sound works fine, but after standby or hibernation there is odd audio 'glitches' each time there is a spike in CPU activity. The seeds just sounds like small clicks and pop, but I find them very noticeable. They are triggered by things as simple as loading a page in a web browser (which reached only ~ 30% CPU usage on my computer).
Here's what I discovered by just my own tests:
* Happens in programs that use DirectSound and WaveOut. (I think almost all programs use DirectSound, right?)
Programs that use his alternative such as the ASIO API are not affected. I've tested it using foobar2000.
* When recording my sound output using Audacity, clicks and POPs are included in the record. (I can download it somewhere if you want to hear exactly the kind of glitches that I'm talking about).
These facts lead me to believe that the program exists somewhere in the code of Windows Audio (ie. not a hardware or driver problem).
A few things here that I tried to solve the problem:
To restart the "Windows Audio" service.
Stop service "Windows Audio", go to sleep, wake up, start the service 'Windows' Audio.
* Updated my audio drivers
Using the default windows audio drivers
The seeds still exist when I try these. The only thing that solves the problem is to restart the computer.
The most obvious permanent solution to this problem is simply not to use mode 'sleep', but I should be able to use the "sleep" without these problems. I hope just this problem is fixable by me, because after all, I lived in an attempt to solve this problem, I'm afraid that nothing will work.
OS: Windows 7 Ultimate x 64
Sound: Realtek ALC662 HD Audio
Thanks for the reply again, Umesh. Updating drivers did not work, but I managed to solve the problem.
In my original post, I said sound glitched whenever there was a CPU usage, but today, I realized that it was actually using the network causing glitches. I updated the driver for my network card and now the problem is gone! I don't know what was going on, but at least it works now!
-
Office Jet 7612: Scan of the computer does not work after you win 10 improvement
One of my clients has an officejet 7612 and has improved to win 10 to win 8 and lost the "Scan to PC" features themselves the printer he used for years to create his PDF files.
Print and scan drivers seem to work to scan and print from the computer to the printer, but the printer software that was authorized to create PDF and JPEG of the scanner and send them to the computer doesn't seem to work.
Is there any solution for this?
Y at - it another way easy to make PDF files or is this feature lost with the upgrade?
Shane Valcich
Hello
Thank you for using the HP forum.
You can download and install the software COMPLETE features of HP printing for your operating system:
Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.
How to scan to computer
To scan from printer to computer, you need to install the printing software full of features first.
Once you have installed the software,1. click the printer (on your desktop) and it will bring up the HP printer Assistant.
2. in the menu analyze, there is a 'manage Scan to Computer', click on that.
3. make sure that 'enable' the Scan of the computer. Also check the tab "Automatically start Scan of the computer when I connect Windows" is to check if you want to have this feature permanently. (an example is shown below)Hope that helps.
-
When I turn on the computer of gateway, the machine starts and the initial window logo starts and runs for about five seconds. Then the screen goes black instead of blue and stays black for about 10 seconds. A 'Power SAVE MODE' appears. The machine is dead to all orders. I have to stop by pressing the off button. I can turn back and the F10 key to get in Mode safe mode with networking.
I tried to reinstall Windows XP original but it would erase my files. I tried to restore the last good configuration also knowledge. That did not work.
The change came after a Windsows update. I have McAfee security and I asked Windows but could not use due ot a conflict. -C' is all this bad start. Clues? I use Negear. No change when I hooked directly either.
Botton line, I can run in SafeMode with networking; but it is slow and I can't make alll I have to do. What does not load Windows?
http://wiki.answers.com/Q/How_to_get_out_of_power_save_mode_when_computer_screen_is_black
-
Vista desk top of page monitor screen remains black when the computer wakes mode standby
Windows Vista Edition Home Premium
Dell desktop
Intel Q8200 @2.33 GHz processor
6.00 GB RAM
32-bit operating system
Type of card ATI Radeon HD 3450
Driver update has been installed without any problems.
When my desk top comes out of fashion 'sleep' (using the mouse click), I hear my computer turns (beeps once and can hear the hard drive and fan), but can not get the screen on the monitor to display (rest is black). Can only crash the system to get everything back to normal. I searched in internet and microsoft forums but didn't find a solution. Please help, it seems that many others also have this problem without solution. I like to use "sleep" mode and do not want to resort to turning off the sleep mode option.
Hello
Please provide information for a better understanding of the issue.
1. what was the recent change in hardware or software performed on the computer before the question?
2. are you having the same problem when you Hibernate the computer?
Check the display driver for power management problems.
Method 1
Check if allow this device to wake the computer is checked in the Device Manager.
a. click Start, type Device Manager in the start search box and press ENTER.
b. Select graphics cards, it will display your display driver, right click and select Properties.
c. Select the power management tab.
d. check the allow this device to wake the computer check box.
e. repeat these steps for the network adapters and the mouse as well.
If the problem is not solved then continue to.
Method 2
Remove both power on your computer and check to see if that fixes the problem.
Reference:
Change, create, or delete a power plan (scheme)
Try to create another plan of the power of your computer and check if the problem persists.
Power plans: frequently asked questions
See also (additional links for more information),
Hope this helps
-
Scan of the computer does not work in silent mode of the button on the front panel.
The machine is the Photosmart all-in-1 6280 on a network of small size and using the HP Solution Center. Basically everthing works fine, but when I use the button on the front panel to scan a document, it seems necessary to walk to the computer to answer a question about whether I want to scan another document until I could walk to the printer/scanner and press the button to scan the following document. Surely, there must be a way to do the scan run in quiet mode so that I don't have to keep clicking OK on the computer every time? I have already disabled the overview of digitization and the prompt for advanced options.
Oops, forget all that; now I found the setting 'interrogate analyses' which stood on another branch of the installation menus. That solved my problem
-
Is it possible to get the computer will turn off after completing a task?
Hello
I was wondering, if I download a YouTube video, and while I'm waiting I put my computer in "Sleep Mode", when the download is complete will be my computer turns off automatically, or it stays on? I wonder because my internet is very slow and takes all day to download a single video, so I had to download excessive night but I'm worried about a fire or something to do while I'm asleep. If you can let me know it will stop automatically once the download is complete, I'll be very grateful for your time.OfRyan.Hi Ryan,
If you do it this way, the download stops when you put the computer to sleep. Which, according to me, that you are looking for really to do is to use the Task Scheduler to set up a task to wake the computer from sleep mode, run the task and then put the computer to sleep when you are finished.
To do this, please see the following 3 items:
http://www.SevenForums.com/tutorials/12444-Task-Scheduler-create-new-task.html
http://www.Vistax64.com/tutorials/166809-Task-Scheduler-wake-up-computer.html
http://www.Vistax64.com/tutorials/171042-sleep-return-timeout-unattended-wake-up.html
I hope this helps.
Good luck!
Kosh
-
shut down the computer to shut down after inactivity
Computer turns off after a period of inactivity.
What arrangement can I change so that my computer can't even after the period of idle?
Thank you very much
Margo
Check the power settings in the control panel.
-
Dell inspiron 530 vista PR. House, after the "sleep mode" the computer doesn't wake up. The mouse works fine. (the computer is set to wake you up at a mouse click) When I click the mouse fan goes up like to spend awake mode, but fan and the power light continues to blink. I press the power button once and stop the computer, then the computer says recovery and gets stuck again. Then I turn it off again and it completely restarts and the power led will stop blinking and I'm back in business. -arg... Help! Thank you.
Hello
You did changes to the computer before the show?
Please follow the steps below.
Method 1:
Follow the steps mentioned in the links below.
The problems of wake the computer from sleep mode
http://support.Microsoft.com/kb/266283
A Windows Vista-based computer resumes the mode not sleep if you move or click a USB mouse as the computer is switch to sleep mode
http://support.Microsoft.com/kb/930091
Method 2:
Refer to the section "Why doesn't my computer go to standby or hibernate as expected, or why he wake up suddenly?" the link mentioned below.
http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions
Maybe you are looking for
-
Vista 64 bit on Satellite Pro L40
I installed Vista Ultimate 64-bit on my Satellite pro L40 and I downloaded all the necessary drivers for this OS, but I can't use the FN keys and volume on my keyboard.Does anyone have any ideas as to why they won't work, I had Vista Home Basic on th
-
I also, like others recently have been scammed by am for £199. 99 p - feel annoyed and upset that I was caught. Is their anything that Microsoft could do to stop this abuse?
-
modem stopped working with xp restore
perform a restore to factory settings on dell desktop inspiron 531 with windows XP cd from another computer with xp home and modem now, home not work and yellow several items marked peripheral handle - how can I fix it, please?
-
HP office jet 6500 printer will not print in color
Former title: printer does not print color My hp 6500 office jet print color on my Windows 7 computer
-
HP 990 cm print is no longer the color since the upgrade to the new iMac with Mountain Lion
Have an older CV (990c, m series) which worked fine on my iMac Leopard PPC (X.5.8) running. Since the upgrade to the new Intel iMac running Mountain Lion (the most recent software upgrades / w X.8.2) this printer will print only in black and white, d