closing programs

Similar Questions

• menu start does not display the recently closed programs

  I can't get the start menu to show all the programs that I recently closed, and this under the items added in the start menu, it shows the item titled my recent documents. I like being able to click on the Start button and see what I have recently been in programs.

  Hello

  What you specify is called list of the UPM (most frequently used programs list). The MFU list appears under the list of favorites on the Startmenu. This list tracks the frequency programs are used and displays them in order of the most used (on top) to least used (bottom).
  What exactly is your problem? This list is not displayed any program? or it shows some programs that have been used but does not add new programs to the list?
  Possible solutions:

  1.right - click on the Start Menu and select Properties. Under the Start Menu tab, click the Customize button. under the tab general , in the program section to ensure that the 'number of programs at startup' is not set to 0. If your required number is already set, then clear the list by clicking the clear list button. Now open some of your programs and check if the MFU list now programs or not.

  2. If she has not worked for you, so now you need to check your registry settings
  Open regedit (start > run > regedit > OK)
  Navigate to one of the following keys
  • HKEY_LOCAL_MACHINE-Software-Microsoft-Windows------CurrentVersion------policies-Explorer
  • HKEY_CURRENT_USER-Software-Microsoft-Windows------CurrentVersion------policies-Explorer

  Remove NoStartMenuMFUprogramsList & NoInstrumentation values or set zero.
  For more details, visit http://support.microsoft.com/default.aspx?scid=kb;en-us;292504
  
  

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. http://support.Microsoft.com/kb/322756

• While closing, programs are pending and that I still have programs that are running, but actually I don't

  Hello

  I close all programs and then I closed my laptop but I see message programs are pending and that I still have programs that run, but actually I did not! I close all! and then after a few seconds it just stops himself well. In my view, there is a problem, why I see this message?

  This time, when I stopped my laptop a blue screen appeared saying windows is recovering from an unexpected shutdown. This was not unexpected at all, I closed all programs and all just stop it!

  From elsewhere when I press ctrl + alt + del and start the Task Manager I see not all programs that are running.

  It's a windows 7 64.

  I see message waiting programs so that I still have programs that run, but actually I did not!

  Actually closing manually request does not mean that it is not running

  Some of the startup item typically run in the background

  There is no additional work Windows doesn't do, what application you are running is to show

  All you can do is try to disable all start once and go to the service tab and select below "hide all Microsoft services and disable and to apply, it will ask the start/stop and see same problem is happening or not."

  Press win + r > type "msconfig" and enter and click on start and select Disable all and restart

• Dreamweaver CC 2015 is buggy - crashes when closing program. Can I revert to a previous version?

  When closing Dreamweaver CC 2015, it goes into the eternal spinning wheel and takes several minutes to finally react. I still have my files first close, then close the program. Now, after the closure of my files, I go to my task manager and just kill Dreamweaver. In addition, the updated Acrobat DC update version is also buggy. Just click on a pdf file and an error pops up that Acrobat has crashed - and I wasn't even in the running. Is there anyway that I can go back to previous versions? I'm really tired of buggy programs.

  How to find and install a previous Version of Adobe Apps in CC 2015 | Adobe Customer Care Team

• FSX joystick settings disappear after closing program

  I'm under Flight Simulator X on Windows 7, 64 bit.  I have a Saitek yoke and pedals for rudder CH.  I'll have to set up and calibrate the yoke and pedals whenever I start Flight Simulator x, because the settings seem to be reset after I close the program.  I've never had this problem until I went from Vista to Windows 7.

  The yoke for twenty years of odd functions, it becomes very irritating to say the least.  I have tried to make profiles and save them, but no use.  Has anyone else had this problem and with success the fixed?

  Thank you!

  Hi sfergson727,

  1. what version of Flight Simulator X are you using?

  2. did you of recent changes on the computer?

  3 when was the last time it was working fine?

  I suggest that you download the drivers for Saitek yoke and pedals CH rudder on the manufacturer's Web site and then install the drivers in compatibility mode, check if it helps.

  What is program compatibility?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Does anyone know why Windows 7 Ultimate using all the available RAM. Have 8 GB of memory and resources system shows 99% used. When I close the memory use programs remains at 99%. How free memory is no longer used by the closed programs.

  System has 4 gig memory upgraded to the always the same question 8 concerts. When I reboot, the memory usage is 25% and less than an hour, I'm 100% without having to open programs.

  Hello CaptainofEngineering,

  Thanks for posting on the Microsoft answers Forums.

  Is there something on your task manager see you take a lot of memory?  Continue your problem if you put your computer in a clean boot State?

  If you need help, please come back and post, we are more than happy to help you.

  Kind regards

  Edgar
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows automatically closing programs not responding

  Hello

  As you can see, I have a problem with the shutdown of Windows answers does not automatically programs. Normally I'd wait at least 5 minutes for the program to be usable again, but Windows closes the process of the program automatically after 1 min or more. Is there a way I can turn off this feature?

  Thank you

  Hello

  Thanks for the reply.

  I suggest you to uninstall and reinstall the game and check if it helps you. You can follow the steps below to uninstall and reinstall the game.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-CA/Windows/uninstall-change-program#uninstall-change-program=Windows-7

  Once you have uninstalled the game successfully, you can go ahead and install it. Now search for the question.

• Adobe processes continue to run after closing program!

  Hello

  I have this problem with Adobe Premiere Pro, After Effects, Media Encoder, and hearing, but not with Photoshop, Dreamweaver etc.

  Whenever I close one of these programs, the respective process continues to run in the background.

  I can't restart the program until I go into the Task Manager and kill the process (AfterFX.exe, Adobe first Pro.exe, pproheadless.exe)

  I already tried cleaning with the cleaning tool to uninstall and reinstall but the problem remains.

  I encountered this problem a few months after a long break from Adobe.

  Never had any problems before.

  I cloned my complete system with Acronis on a new SSD a few months ago...

  don't you remember anything else with a lot of impact that could have triggered it.

  System: Win7 x 64

  Software: Adobe CC

  I found the Solution (for me at least)

  It seems to be a driver problem with the 600 series of nvidia graphics cards.

  I installed the old driver for my GTX 680 and everything works fine now (some newer drivers might also work)

  I'll write an e-mail in support of Nvidia and tell them what happened, pls do the same if you found the solution because of this post and

  upcoming drivers going to work well for us once again.

  Best regards

• Closing program

  And each time, when playing video I did, but only when the captions are on. I find this strange. As my computer can not handle me add captions to my video. Well, I can add it, but when reading what I've done and the legend turns, the program never fails to stop. "Adobe first Elements 9 has stopped working", after which I have to close the program. I can solve this? Really, it of annoying, makes it incredibly frustrating to change if I'll use the captions. And I want to do.

  Looks like you have your properly configured for your video project. Although I do not recommend you made (press enter) whenever you see red lines above the clips on your timeline.

  That said, what processor you have, how much RAM and how much space free and clean is on your hard drive? When did you finally run Disk Cleanup and Defragmenter?

• BSOD when base closing program NI DAQ USB-6009

  So, as the title suggests, I get the BSOD error code: MULTIPLE_IRP_COMPLETE_REQUESTS when I close the basic example of the analog input for NI USB-6009. Someone at - he lived this before? My specs are:

  -LV version 15.0 32 bits (developing 64-bit installation to solve a problem without a report, do not know if this will help here as well)

  -Win7 Ultimate x 64 (SP1)

  -Alienware M17x R3

  -Core i7-2860QM

  -12 GB OF DDR3 RAM

  Any ideas on what could be the cause?

  Does happen with particular vi or exe or anyone, including max and daq assistant? If it was built on this machine? Try to force recompile all (Ctrl + Shift + click the button run.

  I can hardly imagine what can be encoded in simple artificial intelligence causes of BSOD. I'd say it's machine problem. Something is not installed correctly. Is - this change help USB? Card mother does a USB 2.0?

• Windows stay open when the program is closed

  I have an intermittent problem that is becoming more and more regular

  When I close a program window remains on the screen

  I can open other programs then when I close them that their windows remain at the top

  Yesterday during one of these events, I opened Solitaire and drag the window to the middle of the screen, but he left a picture behind where he had opened

  I could play the game without any problems, but when I closed it the window remained on the screen.

  From what I see this is just the part of windows that clears the screen back to the office after a closing program that stops working.

  I had another suggestion to try another graphics card

  So I did and went for an upgrade at the same time

  So far, the problem (touch wood) is not re-appeared

  The old radiator of cards has been enough good folk so this may or may not have something to do with it.

  If I never use this graphics card in another machine and get the same problem I know then what it was.

• How can I find which program works in the background

  Using the CPU meter, I see the procent of the CPU usage. Even though all programs are closed, the use is still 10 to 30%. This means that some of the programs installed is still running (perhaps updating auto or something else). I'm looking for who is he?

  [Moved from comments]

  Start the Task Manager and look at the Scriptures in the process tab (click the name image CPU to sort)

  Even with closed programs several background processes are running

• Windows closes programs as it is to melt! What are the causes that

  When I close an Office program looks like it's melting!  Even when I turned off the computer.  What are the causes that?

  Thank you

  Deb

  Hello arcand1772,

  Thank you for the question!

  It is disheartening to know that have problems you while closing programs. As I understand it encounter you problems during the closure of the programmes.

  1. the is the problem with a particular program?

  2. were there any changes (hardware or software) to the computer before the show?

  Post a screenshot of the issue to help you best.

  How i: post a screen shot on this forum? -Microsoft Answers

• XPSp3: Logging disable a user to log on to the other - stop programs?

  I have two users on XPSp3.  Both are administrator-level.  I wanted to disconnect a user and connect to each other and got the warning that unsaved work will be lost.

  Is it just open the files that are closed?  Done also closed programs or the whe switch you users?

  Ed

  When you disconnect a user, all programs started by this user have been completed.

  However, there is a feature called 'Fast user change' which allows you to switch from one user to another without logging the first user... so all programs that are running with the first user are kept in their current state, while the second user can start and run their own programs.   Refer to the following Microsoft KB article:

  "How to use the Windows XP Fast User Switching feature"
    <>http://support.Microsoft.com/kb/279765/en-us >

  HTH,
  JW

• Can't open some programs due to the DEP.

  Hello! I tried to open programs like iTunes and Fine Pix Viewer on my PC (Windows Vista home premium 64-bit) and I can not anymore. He used to work before, but in recent months it doesn't.
  Help me please, once I have no idea what to do.
  The following message appears: "(nom dele de programme) has stopped working." A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. "And then:"to help protect your computer, Data Execution Prevention has closed (program name). Click to learn more» Then I follow the instructions and try to turn off DEP for the specific program and pops up this message: "Data Execution Prevention - this program must run with data execution prevention (DEP) enabled." You can't turn off DEP for this program.
  Thank you
  Rick

  Hello

  The problem might actually be an add-on or another program to the origin of the problem and you should check that
  1st.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER on it
  machines, including those that you have uninstalled (they leave leftovers behind which can cause strange problems).

  Start - all programs - Accessores - system tools - IE with no Addons - does this work better?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security - reset all Zones by default level - apply / OK

  not better?

  Try IE or IE with no Addons

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question. (Toolbars are BHO)
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only. If you ever suspect malware, and that would be unusual with
  Prevx running except a low occasional (not much), updated cookie, and then run it as a scanner.

  I would add prevx so.

  Prevx - Home - small, fast, exceptional CLOUD free protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  -------------------------------------------------------------------

  Do yourself a big favor and work through 1 above.

  How control DEP but I don't recommend turning it off and certainly not to let power off.

  How to enable DEP on or off for a program under Vista
  http://www.Vistax64.com/tutorials/65790-DEP-turn-off-programs.html

  How to enable or disable DEP in Vista
  http://www.Vistax64.com/tutorials/120778-DEP-enable-disable.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.