Closing Subvi memory during execution main vi

I call you a Subvi as pop-up main VI which I'm passing some values also main vi, there is a button leave on suvi with which I am stop the Subvi, but what happens after the Subvi with exit button, I'm not able to run again, even though I am the appellant again once it opens as a pop-up window , but is not in the running state. I think that I have to close the Subvi memory, but I don't know how to do this.

and if with exit button, I tried to make a structure dealing with FP Open property node with fake State with this window closes once but when I try to call him once again, it doen not appear.

I searched a lot of messages on the forum too, but no permit, I do not know how to do this.

Below is the Subvi.


Tags: NI Software

Similar Questions

  • Selections of Subvi persisted during execution.

    I am using a Keysight tool and create a simple VI to take action.

    I am wanting to create a Subvi, which allows you to select multiple configurations for this instrument so that if the user does not like the default configurations that he can go and edit by clicking one button "configure."

    Currently my code passes in the VISA and opens the configure Subvi and you can change the configuration of the instrument, but when you close the configuration window we close the Subvi and then if the user wants to then open the window configuration again that all default values are loaded and the previous configuration is lost.

    Is there a way to persist the decisions taken by the CURRENT of the VI user for the time they use the VI, without completely changing the default selections of this sub - VI? Maybe just hide the VI and show again if needed?

    I wanted to use a side effect, but there are so many inputs/outputs that it would actually work for me unless I'm missing something.

    Thank you

    Kellen

    Measure VI

    Configure Subvi

    A common technique for the persistence of Configuration data is to have a (default) Configuration file is read by your program when it starts and loads all Configuration settings (for the most constant) you need.

    If you want to change settings, your calls to button "Set up" a Subvi, which a bed Configuration file, showing you the values, (b) invite you to change/modify these values and (c) prompts you to save the return the Disk Configuration file so that it can be used the next time.  You can decide for yourself if you want a single Configuration file that gets crushed, or if you want to maintain two or three 'common' Configuration files, and the user to choose which to use ("16 channels, 1 kHz", "8 ways, 500 Hz,"16ch 500 Hz", for example).

    A common format of 'user-friendly' for Configuration files, with the help of screws in the Palette of LabVIEW file IO, are. INI files, which (if done) are human readable.

    Bob Schor

  • Use of LabVIEW memory grows slowly but continuously during execution

    Hello

    I am having trouble with LabVIEW. I develop a data acquisition application. My application acquires data, it (i.e. make a FFT) processes and displays the FFT and samples acquired in some graphics.

    The problem I have encountered is Labview is allocation memory more every minute of what my program is running until finally, it crashes. When starting my program uses about 400 MB of memory after 4 minutes approximately 1.2 GB. Sometimes, when the memory usage reaches 1.2 GB it is suddenly up to 500 MB, but most of the time Labview crashes.

    I already checked the tool 'Profile Performance and Memory'. Surprisingly, my screws have constant use of memory during execution.

    Someone has an idea, what happens?

    Kind regards

    th


  • modify VI during execution

    Dear users of LabView,

    I have a fairly general question about the development of a project, which requires a continuous control of the material. To be more precise, I develop LabView control and DAQ software for calorimeters in high volume in the last 2 years. Such a system requires several PID controls, and it has many subsystems. Because of the large heat capacity, it takes about 3-4 days to launch the system. So if I need to edit for example something in control of the final of a specific subsystem, I stop the LabView code, I have change the specific part, I restart the system, I wait for 3 days, and then I can see the result of my changes.

    My question is the sort of General: what is the good, let's say "best practice" to avoid such a dead time?

    Is it possible to change a VI during execution?

    I understand that if I run the independent screw, that dealing with subsystems, I could avoid this problem. But if I already have a compact 'main' VI, including all the subVIs, what can I do?

    It would be nice to have a sort of "hot swapping" feature in LabView, so during the execution of main VI of my project, I could change the Subvi that I want, and when it is ready to activate, the runtime would swap with the old version.

    Thanks for the tips and advice!

    Best wishes

    Hello

    It all depends on how works your vi...

    The only way I see is to use dynamic calls: a vi called dynamically is editable even if appellant vi is running.

    If you change the callee until the caller calls the vi vi.

    Is how the appellant under vi (this includes the values of connectors and run the VI):

    Best regards

  • VSphere Management Assistant freezes during execution of scripts Perl SDK

    In our environment, we have a nagios server which connects to our Executive Assistant to check the health of our host ESX 4.1 vSphere. Scripts are pretty basic and just run over SSH using cryptographic keys every 10 minutes. The problem is that after a day or so to work properly the VMA one freezes and unresponsive. I am at a loss here as to what is causing this problem that I made sure to always disconnect the server vSphere when scripts are finished. Anyone who has met by this kind of problem before?

    Here is one of my scripts for reference:

    check_cpu:

    #!/usr/bin/perl -w
     
    use strict;
    use warnings;
    use FindBin;
    use lib "$FindBin::Bin/../";
    use VMware::VIRuntime;
    use VMware::VmaTargetLib;
     
    my $host = $ARGV[0];
    my $warn = $ARGV[1];
    my $crit = $ARGV[2];
     
    if ( $host eq '' || $warn eq '' || $crit eq '' )
    {
            print "Usage:  check_cpu <SHORT HOSTNAME> <WARNING LEVEL> <CRITICAL LEVEL>\n";
            exit (0);
    }
     
    my $target;
     
    $target = VmaTargetLib::query_target("vcenterserver.***.****.****");
    $target->login();
     
    my $entity_views;
     
    &main();
     
    sub main
    {
            &get_views();
            &get_cpu();
    }
     
    sub logout
    {
            $target->logout();
    }
     
    sub get_views
    {
            $entity_views = Vim::find_entity_views(
                                                    view_type => 'HostSystem',
                                                    filter => { 'summary.config.name' => "$host.***.****.***" },
                                                    );
            if ( @{$entity_views} == 0 )
            {
                    print "Error: Host does not exist! Exit 2\n";
                    &logout();
                    exit (2);
            }
    }
     
    sub get_cpu
    {
            for my $entity (@{$entity_views})
            {
                    my $status = $entity->runtime->standbyMode;
     
                    if ( $status eq 'none' )
                    {
                            my $totalMhz = $entity->summary->hardware->cpuMhz;
                            my $cpuCores = $entity->summary->hardware->numCpuThreads;
                            my $cpuUsage = $entity->summary->quickStats->overallCpuUsage;
     
                            my $cpuPerc = ($cpuUsage/($totalMhz*$cpuCores))*100;
     
                            if ( $cpuPerc < $warn )
                            {
                                    print "CPU at $cpuPerc\%. Exit 0.\n";
                                    &logout();
                                    exit (0);
                            }
                            elsif ( $cpuPerc < $crit )
                            {
                                    print "Warning! CPU at $cpuPerc\%. Exit 1\n";
                                    &logout();
                                    exit (1);
                            }
                            else
                            {
                                    print "Critical! CPU at $cpuPerc\%. Exit 2\n";
                                    &logout();
                                    exit (2);
                            }
                    }
                    else
                    {
                            print "\tHost $host is in standby mode. Exit 0\n";
                            &logout();
                            exit(0);
                    }
                    print "\n";
            }
    }
    

    Thank you

    You monitor the execution of your hosts vMA during execution of the script? By default, it is configured with only 1vCPU and 512 MB of memory, based on the query and the size of your environment it may be running out of resources that I saw myself, and generally I'll upgrade the memory to 1 GB, if not slightly more depending on what he does. It's probably a good idea to take a look at the performance of your vSphere environment and see what it consumes and if the system is swapping or pegging on CPU.

  • How to disable the close button during execution

    Hello world.

    Please help me how to disable the close button at the top of the window during execution. I don't want the user to use this button to close. I used the button called out in this form but sometimes users of closing by clicking this button.

    I use the formula of Oracle 10 g R1.

    Thanks in advance,

    Or if you want to stop the closing by button close the main WINDOW. Then create a trigger on called KEY-OUTPUT at the FORM LEVEL and just write the value NULL ex.

    Trigger = KEY-EXIT (FORM-LEVEL)
    NULL;
    

    -Clément

  • masking steps during execution

    I have a sous-suite that I point the user to when asked to isolate a card failure.  To give them some flexibility, I got a popup that gives them a certain number of options (see attachment).  I have an m.o. that indicates the individual steps these select/run (i.e. '1' or '3' in the png).  Control flow (denoted by '2') is the noise they don't really need to worry and may / will cause confusion (and possibly problems for me if they select them accidentally).  Is there a way to hide these measures flow during execution control so that the user sees '1' and '2' (and other similar 'valid' selections?

    If there wasn't a need explicit to have the flow control logic, then I'd be tempted to compact all in the post of the Popup Message action.

    By setting the Popup Message Action to go to the step, , use Custom Condition (TRUE):

    And by using the following Expression:

    Step.Result.ButtonHit == 1? RunState.Sequence.Main ["MR_RPack_R55"]. UniqueStepId:
    Step.Result.ButtonHit == 2? "" "RunState.Sequence.Main ["End_PCI_Isolation"]." UniqueStepId:
    Step.Result.ButtonHit is 3? RunState.Sequence.Main ["MR_R103"]. UniqueStepId:
    Step.Result.ButtonHit is 4? "" "RunState.Sequence.Main ["PCI_Intf_PT"]." UniqueStepId: «»

    It should be appropriate level following the Popup Message.

    (SequenceFile attached).

    I hope this helps.

    Charlie

  • FPGA memory during construction errors...

    I am building an FPGA application for a sbRIO-9636. I just added an element of memory to act as a circular buffer.

    The element of memory is the size of 414000 U8 points. When I build, I get an error in the status of compilation window that starts like this.

    «LabVIEW FPGA: compilation failed due to an error of Xilinx.»

    Details:

    ERROR: sim - user configuration exceeds the number of BRAM in the selected device

    ERROR: sim:963 - initializer property intellectual could not set the basic model IP IP settings

    ERROR: sim - user configuration exceeds the number of BRAM in the selected device

    ERROR: sim - could not initialize the IP model.

    ERROR: sim - generator execution failure of Tcl.

    ERROR: sim - failed generation 'ReallyLongUniqueName_ReallyLongUniqueName '. Failed to run generator for Tcl.

    ERROR: sim:877 - error detected during execution of intellectual property "block memory generator v7.3.

    Release 14.7 - Xilinx CORE Generator P.20131013 (nt) Copyright (c) 1995-2013 Xilinx, Inc. All rights reserved.

    I have attached the error any reading.

    Help, please!

    I just realized why I see this error. The sbRIO-9636 comes with 2 088 kbits of RAM block. I missread the quantity in 2 088 kbytes of RAM block, me wanting to use 414000 bytes will not work.

    Thanks to all those who are looking into that.

  • change the frequency of the signal during execution

    Hi, I'm working on a VI to calculate excess of signal I think VI seems to be good (not sure) but now my problem is

    change the frequency during execution, which I am not able to do only when I stop and run the vi frequency changes... pls

    someone help me I tried to put in an event... but no use... maybe iam missing something pls help me...

    I noticed that you have some time a loop around the entire block diagram - I'm not entirely sure why that is.  The way you have your VI wrote that the two inner loops will never come out unless there is an error-'stop' buttons are hidden.  Thus, the outer loop is not do anything for you.

    Once you take it, it is easy to see why you cannot change frequency.  It is defined once, outside of the loops and so never gets checked again.  The best way to resolve this, in your case, is to use registers with shift on the upper loop and check if the value of the frequency has changed since the last iteration.  If so, generate a new waveform and feed DAQmx writing instead.

    See the version annexed to your main VI for what I mean.  (I also replaced the controls to stop with one that is visible and which will stop the two loops without your duty to hit the button abandon.) I'm also an error on the DAQmx read in the loop at the bottom, but I'm sure it will work fine on your equipment.

    See you soon,.

    Michael

  • Tutorial: how to stop a loop 'while' Subvi, which within the main program loop 'while '.

    Hi ppl,

    I searched through the forum on the topic above, but still don't know how to do this. Maybe one of you can post the solution of this important issue.

    I have attached a very simple program: I've done a few while loop as a main program and Subvi as a post-secondary program. Inside the Subvi also manages some while loop. All I want to do is to push the stop button in the main program that will stop the while loop in the second channel; to create a kind of judgment of reference in the main program which influence only the stop button on the Subvi. During this time the loop of the main program will still work.

    Thank you.

    I modified the code that you have joined. check.

  • During execution of the backup and maintenance on one of my computers, I noticed a folder and the file that I can't identify me...

    Original title: identity of unknown folder

    During execution of the backup and maintenance on one of my computers (Windows xp home, sp3), I noticed a folder and the file that I can't identify.  The name of the folder is cc68f6b7a7ca948eefb018f001 and the name of the update.exe file.  The properties of the file that it is a Windows Service Pack installation.  I tried Googling the name of the folder, but found nothing.

    Can you tell me with regard to this issue, and what, if anything, I have to do?

    Thank you.

    When some programs (including Windows) installs things, it can create a temporary folder composed of 20-30 random letters and numbers or random numbers and letters in the root of the drive of the volume with more free space.

    This explains why the records are sometimes on your C drive or any other drive - the most space?

    For example, you can see a similar to or called folder:

    D:\9470bb12e8a4f3447657236478e41c5

    There may be other folders and files in this main temporary folder such as amd64 and i386 platforms.

    They should normally be deleted when the installation is complete, but sometimes they are not - especially if the installation fails.  They are harmless but annoying.  You can think something is wrong when there are no or fear, that the files are really necessary.  To avoid confusion, you can delete the temporary files.

    If your installation has failed or the installation does not remove the folder to the random name when it finishes running again installation will be another folder at the random name.

    You may be able to identify installation (out of curiosity) by looking at some of the contents of the folder and decide if this installation was not serious, just remove the files/folders.  If the installation does not work for some reason, run again just installation will create a new temporary folder to the random name so the old temporary folder is really useless.

    Records are sometimes tough to remove.  Even if you are an administrator on the system, you might get a "sharing violation", "access denied", "used" or type similar message when you try to delete temporary folders.  Facilities sometimes use different permissions that can have a regular user with the administrator group.

    There are many methods to try to remove the folders, and some require third party programs to install or change some windows settings that could compromise the security of your system if you do not change them back when you're done.

    Start your system in Mode safe mode (by pressing the F8 key several times just before XP attempts to load) is one good method to try to remove the files because it does not have to make any changes to your system configuration or by downloading third-party programs.

    If you are running XP Home Edition, the following section on turn off "Simple file sharing" does not apply to you since in XP Home, Simple file sharing is always turned on.  If you are running XP Home Edition, skip the next few paragraphs and resume where it says:

    "If no part tool above work try a third popular called Unlocker.

    If Safe Mode does not work you can change the security of the folder when you start in Normal Mode to give your username full control over the files by navigating to it in Solution Explorer, click on tools, Folder Options, view and in the advanced settings window, uncheck (at the bottom of the list) use simple file sharing (recommended) and click OK.  This disables him recommended simple file sharing on your computer if you want to turn it back on when you're done to make everything you do.

    Right-click on the files of interest, click Properties and click the now visible security tab.  Change the properties, but you need (for example, select your user name, and check the box to allow full control), click OK to apply the changes.

    With usage share of active simple files (recommended) the checked the properties of the folder tabs are:

    General, sharing, customize

    With the use of sharing files simple disabled (recommended) box unchecked, the properties of the folder tabs are:

    General, security, customize

    Now, try to manipulate/delete the folder.

    It's a good idea to go back to the Explorer and the cheque in the box easy to use sharing files (recommended) when you have finished making everything you do.

    If none of the above works, try a popular third-party tool called Unlocker.

    Unlocker can be downloaded here:

    http://www.emptyloop.com/Unlocker/

    If you use Unlocker, be sure to install because he wants to add a bunch of options, addons, shortcuts and other extras that you don't need.

    You must add the shell extension so when you right click on the offending file, you will have a Unlocker option to choose.  I would just install it long enough to clean up the leftovers and then, I usually just uninstall and all parts of it.  You can always install it again another day if you like.

    Unlocker can be uninstalled when you have finished using it.

    Reboot when finished to ensure that boring records are really missing.

  • Fill the programmatic view object during execution

    Hi all

    I have a requirement to switch between the three different data source during execution in a single page. The user interface and the field names are the same for these three cases, but data from various sources (queries).

    So, imagine that we have 3 objects in view which has implemented read-only (object request depending on the view) and we want to fill a display object at the main performance as a data source for my page.

    My idea is to use "Prgorammatic view object" for this data source and then fill dynamically the contents of one of the three objects view read-only based on a setting in the user's selection.

    First of all, I want to know if it is thin approach and if yes, then get some points on the implementation or any other sample.

    I found this example:

    http://techiecook.WordPress.com/2011/05/17/programmatically-populate-view-objects-in-Oracle-ADF/

    Thanks in advance,

    Nasser

    Hello

    It is more a case of use for Adaptive connections. See:https://blogs.oracle.com/groundside/entry/towards_ultra_reusability_for_adf

    You can use EL to change the name of the ViewObject that an iterator in ADF queries its data. If the switch is on the link layer and there is no need for programmatic view objects. Unlike in the article of the blog above, VO 3 exist in your case then you don't need to create on the fly. Just change the name of VO in the managed bean referenced

    Frank

  • I use Adobe Acrobat Pro XI (11.0.08) during execution of "save under" process "Reduced the size of the pdf file" Adobe for awhile then stops completely and needs to close. All started to do that today.

    I use Adobe Acrobat Pro XI (11.0.08) during execution of "save under" process "Reduced the size of the pdf file" Adobe for awhile then stops completely and needs to close. All started to do that today.

    As I had not heard of you, I tried to 'cut' of this folder and pasted into a folder, I called "temptemp" in the same root fodler lacation, (not in the original file). Run the program and it gave me the same error and closed again.  Any help now?

  • Resizing a JButton during execution

    Hello. I have problems with a JButton resizing during execution. I can set the size of a JButton in my JFrame constructor. However, when I try to change via an ActionListener has defined the JButton even nothing happens. I tried to call invalidate() on the JButton and the JPanel that contains nothing will do. Any help to fix this would be appreciated. Below the source code.
    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.*;
    
    public class framebuild extends JFrame
    {
         JButton button1, button2;
         JLabel label;
         JPanel labelPanel = new JPanel();
         JPanel buttonPanel = new JPanel();
         
         public framebuild()
         {
              super("Error");
              setDefaultCloseOperation(EXIT_ON_CLOSE);
              setPreferredSize(new Dimension(300,300));
              setLayout(new BorderLayout());
              setResizable(true);
              
              clickresponse responder = new clickresponse();
              
              label = new JLabel("Resize button?");
              button1 = new JButton("OK");
              button1.addActionListener(responder);
              button2 = new JButton("Cancel");
              button2.addActionListener(responder);
              
              
              labelPanel.add(label);
              
              buttonPanel.add(button1);
              buttonPanel.add(button2);
              
              add(labelPanel, BorderLayout.CENTER);
              add(buttonPanel, BorderLayout.SOUTH);
         }
         
         private class clickresponse implements ActionListener
         {
              public void actionPerformed(ActionEvent e)
              {
                   if( button1 == e.getSource() )
                   {
                        button1.setPreferredSize(new Dimension(100,100));
                        button1.invalidate();
                   }
                   else
                        System.exit(0);
              }
         }
         
         public static void main( String[] args )
         {
              framebuild frame = new framebuild();
              frame.pack();
              frame.setVisible(true);
         }
    
    }

    First of all, a few notes on your code.

  • By convention, Java class names start with a capital letter and the first letter of each internal Word is capitalized. FrameBuild, no framebuild and ClickResponse, not clickresponse.
  • It is usually seen on evil as a diversion from the legacy of needlessly extend a class. Your class could contain a JFrame rather than extend the JFrame.
  • All Swing components should always be created and modified on the EDT and only on the EDT.

    When you make changes that affect the provision of an already visible from container, you must call, ( revalidate() and repaint()sometims) on the container.

    //button1.invalidate();
    buttonPanel.revalidate();
    

    DB

    Edit

  • Avoid the 'standard' listeners who need to identify the source of the event to determine what steps to take. Soon, they develop little handy in any real application.

    Here is the summary of my recommendations, adapted from your code.

    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.*;
    
    public class FrameBuild {
    
      JButton button1, button2;
      JLabel label;
      JPanel labelPanel = new JPanel();
      JPanel buttonPanel = new JPanel();
    
      public static void main(String[] args) {
        SwingUtilities.invokeLater(new Runnable() {
    
          @Override
          public void run() {
            new FrameBuild().makeUI();
          }
        });
      }
    
      public void makeUI() {
        label = new JLabel("Resize button?");
        labelPanel.add(label);
    
        button1 = new JButton("OK");
        button1.addActionListener(new ActionListener() {
    
          @Override
          public void actionPerformed(ActionEvent e) {
            button1.setPreferredSize(new Dimension(100, 100));
            buttonPanel.revalidate();
          }
        });
    
        button2 = new JButton("Cancel");
        button2.addActionListener(new ActionListener() {
    
          @Override
          public void actionPerformed(ActionEvent e) {
            System.exit(0);
          }
        });
    
        buttonPanel.add(button1);
        buttonPanel.add(button2);
    
        JFrame frame = new JFrame("Error");
        frame.add(labelPanel, BorderLayout.CENTER);
        frame.add(buttonPanel, BorderLayout.SOUTH);
    
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        frame.setSize(300, 300);
        frame.setLocationRelativeTo(null);
        frame.setVisible(true);
      }
    }
    

    Published by: Darryl Burke

  • Why get error during execution the FPGA VI?

    Hello world

    I have a lot of sense of wrong during execution of a program that has been correctly executed previously. I don't know what I did wrong.

    Now, whenever I run this FPGA VI, I get an error (in the attachment). And, then runs the FPGA VI, but it does not give the data required those he supposed to give as output.

    Any help or recommendations would be appreciated also.

    Thank you.

    Hi auree123,

    There are a few reasons for this error
    may occur.  Could you tell us more about what's going on?

    You are
    I get this error when you compile and if so, at what stage?

    It looks like
    as you may be running it in Interactive Mode, which means that you are viewing
    the front of the FPGA VI on the development computer that you are running - is
    that correct?  If so, you could try to create a VI on your host
    Open a FPGA reference and communicate with the FPGA programmatically rather than interactively.

    Thank you

    Morgan S

    Technical sales engineer

Maybe you are looking for

  • Long pages document

    I create a memory book.  If I used a web page, I could set up links in the document which would take the user to the additional documents or images that are related but not included in the main text.  The ancillary items would live in a separate fold

  • Cannot select titles iTunes for slideshow

    When you compose a photo slideshow by selecting the music by clicking on the symbol on the right side of the screen, all securities iTunes available for selection are in gray and can not be selected. I use iCloud library and iTunes game, so the two s

  • Cannot access the folder pictures

    System information: Windows Vista 32-bit, Business edition HP Pavilion dv6000 laptop The fundamental problem is that I can't access my images. The icon appears only as a white sheet of paper instead of the photo icon that normally appears. When I try

  • Problem with headphones 9320curve blackBerry Smartphones

    Hello the volume of the headphones during calls is down, can not adjust. The volume of the speaker is OK, can adjust. No idea what is the problem and what is the solution

  • How to convert SWF to APK

    I have swf, fla file and I want to convert in apk that can run on android phones.someone help me or guide me how to convert?