cocodede80070422 Wiondows 7 udate same error appears every time you start. Impossible to verify new updates. Followed to fix windows nothing helped.
errorcodede80070422 Wiondows 7 udate even appears each time you start. Impossible to verify new updates. Followed to fix windows nothing helped.
Hi Colin,
Thanks for posting your query on the Microsoft Community.
According to the description of the problem you found error 80070422 when checking for Windows updates. This problem may occur if one or more of the following conditions are met:
- The Windows Update database is damaged.
- Antivirus software is configured to scan the folder % Windir%\SoftwareDistribution.
- Service (BITS) Background Intelligent Transfer Service does not receive a content link header.
- A required system file is incorrectly registered.
I suggest you to try the steps below and see if it helps you to solve the problem.
Method 1
I suggest you to check if you are able to access Windows Update services and also make sure that the following services are started. If it is not started, follow the listed below as follows:
a. press the Windows key + R, type "services.msc" (without the quotes) in the Run dialog box to start, and press enter.
b. Locate the Windows Update service.
c. right-click on the Windows Update service and select Properties.
d. in Startup type, select enable.
e. click Start under Service status.
f. click OK.
g. Repeat steps c to f for the following services :
CSP & Background Intelligent Transfer Service.
If these steps do not help to solve the problem, you can proceed to the step below and check.
Method 2
Step by step instructions for the fixed number.
net stop cryptSvc net stop msiserver Ren SoftwareDistribution.old C:\Windows\SoftwareDistribution Ren C:\Windows\System32\catroot2 catroot2.old net start wuauserv net start cryptSvc net start bits net start msiserver
(a) press the Windows key + X , and then select (Admin) command prompt.
(b) on the prompt window open copy and paste commands (all at once)
net stop wuauserv
net stop bits
(c) wait for the course to complete.
(d) close the command prompt.
Now, try to reinstall Windows updates and check if it helps.
Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.
Kind regards
Tags: Windows
Similar Questions
-
Two weeks ago I started getting this error whenever I start up Firefox: xmlNode.getElementsByTagName ("id") [0] .firstChild is null - 2.
I uninstalled and reinstalled Firefox, but the error persists. Then I did a restore and system several months ago, but the error persists. This does not happen with other programs.
Does anyone know how to get rid of it. If it has nothing to do with the registry, I'll have to let it be and switch to another browser.
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).
- Makes no changes on the start safe mode window.
See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems
If this does not work in safe mode and then disable all your extensions and then try to find out who is causing by allowing both the problem reappears.
- Choose "Disable all add-ons" on issues to troubleshoot Firefox in Safe Mode to set window to disable all extensions.
- Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')
See also http://kb.mozillazine.org/Standard_diagnostic_-_Firefox (Extension_issues, Profile_issues)
-
I can't get this update never ends. How do I get this to end?
See this response archived from a previous thread:
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/d21f732a-D329-4CE3-916D-abeea8fa62ee >
-
Windows Update runs every time you start and says that "some updates failed"
My computer wants to update each time after starting upwards.
When I let it run at the end of the update that always, I get this:
"Some updates failed"
Microsoft. NET Framework 3.5 SP1 on Windows XP, Server 2003, Vista, Server, 2008 x 86 (KB2657424)
Try to connect to windows update manually, choose the "custom" button
Let it scan, perform updates.
Also, the update update update to "Microsoft update".
It is an upgrade for xp.
-
Hi all
An error message appears every time I start my laptop Alienware of window 7, the message reads: "wscript.exe - no disk" there is no disk in the drive. Please insert a disk into \Device\harddisk1\DR1.
I'm a bit confused with this error message, I don't know if there are viruses in my computer, or the reason why this error message whenever I start my computer,
Although I installed file encryption software.
This could be a virus? and how to prevent this error message appear on my computer.
Sounds like malware. Run msconfig.exe, and then selectively uncheck items under the Startup tab until you find the culprit.
-
I had a power failure and I learned today that there is a problem with the cache and I need to go to Preferences, purge the cache. I did this, but get the same error message every time I open the subsequent times of bridge.
Mac or PC? Version of the OS? What version of CS?
Have you tried to reset the bridge? CTRL (Windows) / Opt (Mac) + click on the bridge to start icon and select open boxes.
Otherwise, you could manually delete the cache, but we need to know the answers to questions to say where he is.
-
HP Pavilion dv2700 laptop displays the message "system CMOS checksum failed" every time you start
Hi @all,
I have a HP Pavilion dv2700 - kh933ea laptop computer #abv (it is a HP Pavilion dv2799ee Special Edition Entertainment Notebook PC to be exact) that displays the message "system CMOS checksum failed. Press F1 to continue"every time you start the system. My OS is Windows 7 / 32 bit.
Then I updated my BIOS to version 2.4e, 01-dec-08 Phoenix (the SMBIOS version remained the same before 2.4), but the issue is not resolved. I have attached a screenshot for processor and BIOS versions.
Can someone guide me on how to solve this problem?
Thank you very much in advance.
I don't see the screenshot of your post attachments. Please repost them.
This error message means that WHAT BIOS is damaged. You will need to have the BIOS flashed in a mobile shop, repair a BIOS or an HP Service Center. Do a search online with Google or Bing repair for a BIOS. If you keep trying to update the BIOS there will come a time where everything you have a black screen.
-
Creative cloud forgets to reduce in the Systray every time you start
Hello everone,
After the update of the creative cloud (2.1.1.110 of course) it seems that every time you start Windows the creative cloud window appears in the foreground. The option 'Minimize to Systray' is always chosen, and even if I mark it and minimize the CC, after a reboot the window is still there. It seems that CC forget, that it should not pop up and minimize itself the silently in the systray (like any other program smoothly). Are there any suggestions how to fix this? The registry tweaks?
Jens, try please upgrade to the latest version.
1. remove the cloud creative app.
Using creative cloud | Uninstall the creative cloud desktop application
https://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html
2. install Creative Cloud app - https://helpx.adobe.com/creative-cloud/help/install-apps.html
-
XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.
Hello
Let us perform the steps below and check out them.
a. click "Start," "Control Panel", then "Add or Remove Programs". In the box "Currently installed programs", find the name of your wireless router. Click on the name of the software, and then click 'remove '. Click 'Yes' when prompted to confirm.
b. click "Start" then "run". Type "Services.msc" and click "OK". Select 'Wireless Zero Configuration'. Click on 'start '.
c. click 'Action', 'properties '. In the drop-down menu "Startup Type", click on the arrow and select 'Automatic' to assign the commissioning of automatic Wireless Auto Configuration. Click on 'OK '.
d. restart your computer.
e. right click on "Wireless connections" icon Select "View available wireless connections." Click on "change the order of preferred networks. Select the name of your network, and then click "Properties". Erase the old key and enter a new. Click the checkbox next to "Automatically use that key." Click on 'OK '.I hope this helps.
Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Check disk every time you start
Inspiron 5100 XP SP3
Every time you start the computer says "disk Check is scheduled" and immediately starts a disk check that was more than an hour. I can cancel by pressing ESC, but even at every startup. Looks like I could uncheck something in msconfig/startup but what startup item? Any help?
-
I get the following JavaScript error every time I start Firefox:
ReferenceError: prepareFFB is not defined.
Hello, this sounds like it is probably caused by an add-on. you have any extension/theme installed, you can connect the "FFB"? Otherwise try to disable everything in firefox > addons > extensions & re-enable one by one to see which one might be causing the error message.
-
Every time you start, my 4 monitors rearrange their order - it is not included on the desktop
Recently, I downloaded several updates to Windows Vista. Among them have been updated for my NVIDIA GeFroce 6200 display THE and NVIDIA nForce Networking Controller. Restarts, 2 of my 4 screens would not appear. By checking Device Manager, there was a mistake with the controller who controlled the 2 monitors. The failure of two attempts to restore to a previous download time. Then I downloaded a driver for the controller by mistake and was able to resume all 4 screens.
However, when the computer reboots, monitors have been rearranged in order on my desk and a remained dormant. I can bring to the top of the screen 4 by extending to the desktop under display and, at the same time settings, change the location of my primary monitor. However, I don't want to do it every time I start my computer. Also, all my icons was reorganized. Any ideas how I can stabilize my understanding of monitor on my desk?
Hi Wandwinc,
We faced such issues and others such as the screen resolution changes at each restart, some BSOD etc a few recent updates released by Nvidia for their graphics cards.
I suggest you restore to an earlier version display driver and check what is happening.
http://www.nvidia.com/object/notebook_driver_instructions.htmlIf this helps you fix until the question, let not install, update the drivers from windows update as well, they are compeltely checked by Nvidia.
I suggest contact you Nvidia if possible.
http://www.nvidia.com/page/support.htmlConcerning
Terminator -
(Legitimate) -Pop-up Windows every time you start Firefox
So, lately every time I start Firefox, the new browsing session retrieves the pop-up windows during previous sessions (since the last time or even some of love it, three days ago), I long closed down. My boot option was always "show my windows and tabs from last time ' who used to do exactly this: pick up the tabs I had open or start with a new blank tab if I had opened. Now, however, whenever I open FIrefox I get different windows of previous sessions.
The problem here is that this doesn't SEEM to be a malware issue because I don't get weird ad/questionable windows but "legitimate" pop ups I me remember I started personally is to say a photo or an image of a trusted site that opened in a new window or a help section on amazon.com , etc.
This is a first and as you can imagine it has become very annoying. I use Firefox 25.0.1.
Any ideas? Thank you!Hello waydown, maybe the files in your profile folder that contain session restroe data was corrupted - perhaps trying to remove them, so that they can get regenerated properly next time: go in firefox > help > troubleshooting information, click on file/show profile folder and close all firefox windows later. a windows Explorer window should open up - in there remove all files starting with sessionstore ...
-
Why print alignment page every time you start?
Recently, my printer HP (Photosmart C3180) started printing a page of alignment every time that I turn it on. This seems to be a cynical way for HP to sell more ink, because my printer has no alignment problem. The alignment page wasting my paper, waste a ton of ink I have to pay for and wasting my wait time to perform another task, deal with the sheet of waste and waste time more often when I have to buy ink. I searched through all the instructions and installed Help topics and find nothing that even talking about alignment each time you start.
Hello
Most probably the alignment page is printed on every reboot due the alignnment process is not entirely complete.
Try to complete the alignment process by following the steps below:
http://support.HP.com/us-en/document/c01336397
Alignment must also contain black, yellow, Magenta and Cyan as the example below, any color missing due to the low or empty ink cartridge can cause the alignment to fail
-
3 rundll errors appear every time I restart my laptop
Hello
When I restart the laptop, I get the RunDLL 3 error messages. They do not seem to affect the performance of the computer, but they must mean something. If I need, where can I get the new?
Descriptions of the errors are...
RunDLL
THERE WAS A PROBLEM STARTING
C:\USERS\IKKATUN\APPDATA\ROAMING\deapui.dll
THE SPECIFIED MODULE COULD NOT BE FOUNDRunDLL
THERE WAS A PROBLEM STARTING
C:\USERS\IKKATUN\APPDATA\ROAMING\rsprt.dll
C:\USERS\IKKATUN\APPDATA\ROAMING\rsprt.dll IS NOT a VALID WIN32 APPLICATIONRunDLL
THERE WAS A PROBLEM STARTING
C:\USERS\IKKATUN\APPDATA\ROAMING\LOCAL\ATHEROS\ARCSOFT\nawrztoff.dll
C:\USERS\IKKATUN\APPDATA\ROAMING\LOCAL\ATHEROS\ARCSOFT\nawrztoff.dll IS NOT a VALID WIN32 APPLICATIONI am running Windows 7.
Please think!
Thanks in advance!
Looking for errors like this by doing a search on Google for the name of the file. Usually, they turn up without success.
When a search in no hits or suspicious hits result, the answer is usually that the file in question is linked to the malicious software and your anti-malware application has deleted or quarantined file, but left to the Windows registry entry that tries to start the malicious software when you start your computer.
First of all, download, install, update and run full scans with two of these free analytical tools:
MalwareBytes AntiMalware
SUPERAntiSpywareDo not run the scans at the same time. They can take some time, so start an and then go for a non computer chore for awhile.
If the scans does not solve the problem (and they can't, because the actual malware file has already been processed), then download and run Autoruns. Click on the "Connection" tab and look in the column 'Image path' for the dll named in your error message. If it is not displayed in the connection tab, click the "all" tab and use the file > search tool. A characteristic of the search of Autoruns tool is that you must move the selection under the element line "found" before you "Find Next."
Once you find the line with the file in question, either "delete" or (if you want to be safer) uncheck the box. The latter prevents the line running, but you can reactivate later by replacing the checkmark.
Maybe you are looking for
-
Mac Cmd click does not open in background tab.
This isn't the case for all websites well. I noticed this on Tumblr and Gmail. I tried safe mode, but same problem persists.However the right and selecting "Open link in a new tab" always open in the background.
-
IM reimage Windows, how can I transfare/keep all my stuff in Firefox?
Hello, once more... If shortly after restoring my system to the old point, fixing a couple of things, my system has in general been hell. Many features (explorer.exe [not IE... (EVER], Adobe Flash Player, Firefox, Skype, etc.) has been freezing, then
-
This started happening yesterday, and I was wondering if it was because I needed to install the last update, so I did this first thing this morning and restarted Firefox, but it is always the case. I can not open a new tab. I can open a new window, b
-
Re: Win7 x 230 2306CTO audio problems
Hello, I give you your comments about this audio one speaks in this discussion forum. I have a 230 x that keeps audio problems. The audio buttons stop working, or if the buttons work, no sound of the laptop without going into Device Manager and rem
-
Quota of change in QML container
This doesn't seem to work: Container { layout: StackLayout { orientation: LayoutOrientation.LeftToRight } Container { id: cnLeft property int quota : 50 layoutProperties: StackLayoutProperties { spaceQuota: quota } background: Color.Red Label { text: