Code 10 made his first appearance for my tsstcorp cd/DVGW-ts-l632d ata device
cannot burn discs on my laptop
Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:
http://support.Microsoft.com/kb/982116
These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.
Create a System Restore Point beforehand and restart the computer later.
Tags: Windows
Similar Questions
-
error - coded 19; involved device is CD/DVGW - TSST Corp. CD/DVGW TS-H652M ATA DEVICE. does not load at startup, nor do I have an icon E:\drive on my related 'Computer', only C and D of backup disks, since it has failed to load. E is my player device on the windows vista operating system to 32-bit. I tried the driver down load and FIXIT online program, they say that my drivers are repairable, but the problem is in the registry and device instructions at the beginning upward. What should I do next!
Hello
19 code means there is a driver conflict such as two devices attempt to use the same resources.
Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack.Normally the above will solve this problem otherwise working your way down through them, even if you did
them before.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsSome DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.Hope these helps.
Rob - bicycle - Mark Twain said it is good. -
Captivate 6: predefine an order at first appearance for a sequence question
Hi all,
Can someone tell me if there is a way to predefine a specific command to use when a matter of sequence type appears for the first time to the learner?
This type of question (sequence, with the Type of response 'Drag Drop') uses a 'Shuffle answers' default option (there is no need to check an option to do so that no such option is provided), 'good order' may appear initially to the learner, like all other orders...
In other words, I would like to put an incorrect order (to be displayed when the question is displayed on the screen) so that the learner is forced to drag the answers to get the correct order.
Thanks for help.
Jean Laurier
All I KNOW is not possible. Another solution would be the creation of a sequence with the Assistant D & D. ATTENTION slides: I created such a slide personalized with the D & D InfoSemantics, interactive widget that worked great permit partial rating (customer and never paid me), not tried with the built in D & D
-
problem to find a driver for my Toshiba satellite laptop that has a CD/DVGW TSST Corp TS-L632D ATA MK1637GSX ATA
pilot info (which is apparently a published Microsoft driver) for the device in the computer laptop Toshiba Satellite P200-RT5, full info about 2 years is:
TSST Corp TS-L632D ATA MK1637GSX ATA CD/DVGW
Windows version: 6.0.6002.18005 created: 21/06/2006; modification: 04/10/2009; size: 65.5 KB; Description of the file: SCS1 CD-ROM drive.
I can't find it on your site or Toshiba. My driver I think is damaged. My Device Manager, in properties, said to me:
"Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »Hello
Code 39 means that the driver is corrupted or missing.
Please make all below even if you have done some before as it is often the set of operations which solves
the question.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.--------------------------------------------------------------
Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
are you can reinstall the 'old'. Many use Windows default drivers however some special aura
ones. Also check the website of the manufacturer of the car.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHope these helps.
Rob - bicycle - Mark Twain said it is good. -
the computer gives a malfunction code 19.
IN Dutch "Kan said expensive niet starten configuratiegegevens omdat in het register onvolledig beschadigd zijn. '. (Code 19) »
Cannot install device because configuration information is corrupted incomplete. How can I fix?
Hello
If please see the following thread and follow the steps described in. This should help to solve this problem.http://support.Microsoft.com/kb/314060
I hope this helps. Just reply to the results.
-
How to create (or delete) a new tag for a Web site, so that his tag appears (or does not appear) whenever I restart Firefox?
See this - https://support.mozilla.org/en-US/kb/How%20to%20set%20the%20home%20page
-
I paid for my series/product number code, he entered through the service for verification of the adobe product and my eligibility to audit has been approved. Now my Adobe Photoshop and first 14 elements will not be displayed on my Adobe account.
Available downloadable Setup files:
- Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
- Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
- Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
- Contribute: CS5 | CS4, CS3 | 3,2
- FrameMaker: 12, 11, 10, 9, 8, 7.2
- Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
- Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
- Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
-
Need help, does anyone know what error code 214 means? First action in the creative cloud and that's what I got.
Hello
I just installed Adobe Air and that solved my problem of error 214.
BTW - I'm on a Mac
see you soon
Weird College
-
Barely noticed as useless before using the dvd on this machine cd - error code indicates... .Configuration (in the registry) is incomplete or damaged. (Code 19)
Having read the other answers and the last similar validation seems to be dated to April 2010 of anything else because it please?
I tried Driver Update and reinstall... .rebooting and then on the line ' difficulty his "all so far nothing works. What is the latest information about this problem - can any that provide extra help or guide me for more relevant prior display and the best way to proceed. Failed to load software driver for ATAPI DVD A DH16A6S ATA Device...
Mr. Fix it's obviously gone vacationing insofar as this problem is concerned... Cheers for any help.
Hello
Norton is known to cause slow downs and other issues. Uninstall and then running
the Norton Removal Tool to stop the remains (even those will interrupt the strange) to load.
Use the recommendations below when testing, even better would be permanently.Norton Removal Tool
http://www.Symantec.com/Norton/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN&LN=en_USList of tools to clean/uninstall anti-malware programs
http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/=================================
Here's what I use and recommend: (these are all free and very effective versions.)
Avast and Prevx proved extremely reliable and compatible with all I have
launched on them. Microsoft Security Essentials and Prevx have also proven to be very
reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
Operation of the network.Prevx - Home - free
Windows Firewall
Windows Defender (is not necessary if you use MSE)
Protected IE - mode
IE 8 - SmartScreen filter WE (IE 7 phishing filter)
I also IE always start with asset if filter InPrivate IE 8.
(It may temporarily turn off with the little icon to the left of the + bottom
right of IE)Two versions of Avast are available 5.x and 4.8 x
Avast - home - free - 5.x stop shields you do not use (except files, Web, network, &)
Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
disabled - click OK
http://www.avast.com/free-antivirus-downloadAvast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
Finish those you don't use).
http://www.avast.com/free-antivirus-download#TAB4Or use Microsoft Security Essentials - free
http://www.Microsoft.com/Security_Essentials/Prevx works well alongside MSE or Avast
Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->PCmag - Prevx - Editor's choice
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspAlso get Malwarebytes - free - use as scanner only. If you ever think malware and that
would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
(not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
never find anything of note that I started to use this configuration.I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
How to use the utility disk first aid for hard drive internal el captian
How to use the utility disk first aid for hard drive internal el captian
Select the drive and click first aid.
If something is not repairable because this is the system drive, then you need to start using the recovery partition and run disk utility it.
-
My Ipad air2 does not start. Tried hold it together switch with on/off switch. Apple logo appears for about 15 seconds and then turns off again.
Is there another way to start the IPAD?
Try the steps here:
-
A Firefox help page appears for a while and is then wiped away, in FF4RC
I go to the Firefox Help Page "Look at a video in Firefox without a plugin", and the content of the body appears for a few moments (on my Vista laptop) and then disappears, leaving only the title, the line of contributors, a block of white space, the text block and nurse image of pussycat. The stuff on the part RIGHT is OK.
I get the same on this portable w7, except that I see any good page (perhaps because this laptop is faster?).
3.6.15 on two laptops, the page appears correctly, I think.
I guess my question is someone who knows how to submit a bug report formal on FF4 to see if they can reproduce this and if yes, then please submit such a report?
Or perhaps you could tell me what I'm doing wrong; even if, as he fails on two separate computers to FF4 and works on both in FF3.6.15, I don't think I'm doing something wrong.
I've added the troubleshooting information below, obediently, but I doubt that this is necessary...
In Firefox 4.0 it loads and then "disappears" on slower PCs, faster to load the page, so fast that the content does not appear again.
This web page will remain loaded in Firefox 4.0 if you go on the right side of this page under help with: and click on Firefox 4.0 and select Firefox 3.5-3.6 instead.
This page is empty in Firefox 4.0, because the content applies only to earlier versions of Firefox. The content of Firefox 4.0 is not yet active for this particular article.
-
Phone numbers contained in the e-mails and the web links will appear for a few seconds and then disappear. I use Yahoo mail, however, if I use IE 8, with Yahoo mail, the problem does not occur. Help!
This has happened
Each time Firefox opened
Is whenever I use Firefox
Tools > Addons > > Extensions
You have the Skype for Firefox extension?
If so, disable it. Known to cause this problem for many users. -
Satellite P200-140 - Toshiba Logo appears for a few seconds, then disappears
I have a problem simular with a P200-140.
When he starts the Toshiba Logo appears for a few seconds, then disappears, if I tilt the screen I can see that the image is there but the screen does not light.
I used my projector SVGA output and which works very well. Sometimes after having started a few times the display returns and will then work fine but disappear again without warning especially if yiou closes the screen.
I don't know if it's maybe a switch problem?
Y at - it a contact microphone that could stick when you close the lid?I tried deleting and reinstalling display drivers and booting in safe mode, neither makes the difference.
Hi Mortiss,
Maybe the backlight of the lcd screen went... (I don't think)
or broken wires... (!)
or the lid switch is defectiv (rare)ask a servicepartner to help...
deassemble unity... or watch this will kill your warranty...
-
Safari on my MacBook Pro retina 9.0.3 15-inch Version 10.11.3 do not show images on some Internet sites. They appear for a fraction of a second then disappear with a question mark in the Center. The same sites work fine on Chrome and Firefox.
I suggest you only begin by taking the measures recommended in this support article.
Maybe you are looking for
-
All the menu drop downs are empty and cannot open files or elements of the Office?
IM under OS X Yosemite on iMac 27 ". It also looks like the font on the desktop icons changed. Is anyone know why and / or how to fix this? Any help much appreciated. Thank you
-
You need a card mother Tecra S1 or intact with mainboard failure.
I am owner of a not so happy nowadays to a Tecra S1 1.6 GHz. He got all the typical problems for this model. First HARD drive broke, then taken helmet and graphics card now. Everything was OK until they broke out the graphics card. It worked like a d
-
All have experience using an external microphone with a CX200 HDR? Is is possible?
If I want to use an external mic, equiptment, cables etc do I need?
-
Windows Install CleanUp Utility
I would like to have a clarification on the Cleanup utility.At the very beginning of the article, there is a caveat: Warning The Windows Installer CleanUp utility is provided "as what" to help resolve installation problems for programs that use Micro
-
Memory card reset blackBerry Smartphones
Hi, I took a picture of my car Sunday 19.10.14 in the affternoon and after that my cell was stuck and I got an error message that my memory card needs to be repaired, I turned off and then on I don't want to lose my videos and pictures is there a way