Code 10: Your device cannot start - CD/DVR. It was working fine until I did a windows update and it stop working.

Similar Questions

• DVD/CD RW optiarc dvd rw ad-7560 s ata device suddenly stopped working I get a "code 10 this device cannot start.

  My CD/DVD RW optiarc dvd rw ad-7560 s ata device suddenly stopped working I get a "code 10 this device cannot start.  I have uninstalled and still get this error.  When I put a CD in nothing happens.  It is not read.  Any suggestions?

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Satellite A110 - SD card reader - error message code 10 this device cannot start

  I have a number of cards memory SD, who used to work with the machine's card reader but now gives a code 10 this device cannot start, error message - is this a problem XP - ideas appreciated...

  Hello

  Well, it sounds to be really an XP problem. Eventually he s corrupt registry entry.
  Just try to remove the SD card from the Device Manager reader, and after restarting again try to install it again

  Next

• In Device Manager it says code 10 - this device cannot start (read message)

  In Device Manager next to the icon for pioneer DVD - RW DVR-K17A Device, it has a yellow! triangle and when I click on it, it says this device cannot start code 10. I received the laptop in June and had not noticed the problem til now. When I followed the instructions for possbily install updated drivers/software I did but said that I am up to date.
  Thank you

  First of all: what kind of machine do you have and what operating system is installed on your laptop? Without this information, no one would be able to help you.

  Regarding your problem: I could check this site-> http://support.microsoft.com/kb/943104/ or check this document-> http://support.microsoft.com/?scid=kb%3Ben-us%3B314060&x=12&y=13 (I know, is not the error code of your question, but you can try anyway :))

  Greetings

• Audio Realtek: code 10? Device cannot start.

  original title: audio realtek: code 10? Device can not start... I am running vista, but after a bad fall, I am now running xp pro 32 bit.

  I am running vista, but after a bad fall, I am now running xp pro 32 bit.

  Your sound card driver: http://www.realtek.com.tw/downloads/

  Check with your motherboard if the HD or AC97 card.

• After a custom Windows 7 installed on a Toshiba Satellite P105-S6084, my audio device does not start. Error code: this device cannot start. (Code 10)

  I got driver Conexant speakers on my laptop. I tried to find a device driver updates, but have had no luck. After being in Control Panel, hardware and audio, Device Manager, sound, video and game controllers, under that is high definition Audio Device with a yellow triangle and!.

  After a right click and update driver, it says that the driver is up-to-date. In addition, the error code says this device cannot start (Code 10)

  In addition, this seems to be a driver of Microsoft when the original driver was Toshiba/Conexant. I looked on the support Web site of Toshiba for a driver updated for my laptop and Windows 7.

  Any suggestions?

  Umesh P,.

  Thank you for answering my question. I don't know that this forum allows you to stay busy. Thank you for taking the time to answer my question.

  To sum up, I checked the Windows Audio and Windows Audio EndPoint Builder according to your instructions. Both were running as usual and start automatically, so it wasn't the issue.

  I then visited Fix It. On the web page, since I am under Windows 7, the instructions on the provided web page to access the control panel and through system and security, to try to resolve the problem to fix common computer problems.

  This process led me through the same re-setup of the device through Windows 7 driver that failed previously. Also because it has detected Windows 7, the web page would allow me to run the Fix It program.

  When I visited the Support from Toshiba web page you provided, I was unable to find a sound driver for Windows 7. After filtering through my computer on their web page, the nearest driver was for Vista.

  Take a chance, I downloaded it anyway. What has been the worst that could happen? It does not work? Well, I was there already. In any case, the installation worked and I now the audio again.

  Moreover, this is the link for the driver, for anything that might be in a similar situation I've been:

  driver_audio_conexant_25636A.exe

  -or-

  http://cdgenp01.CSD.Toshiba.com/content/support/downloads/driver_audio_conexant_25636A.exe

  Also, Conexant offers no direct audio driver support and ask you to check with the manufacturer, which in my case is Toshiba. Toshiba not currently has an audio driver Windows 7 for my particular Satellite phone. Since this is an older, they can't come out with an updated driver.

  But, since the audio driver Vista download works, it is now a non-issue.

  Thank you!

  Jay

• Envy 17-j120us: high definition Audio Device, Code 10 device cannot start, yellow triangle

  My IDT audio works fine and its works my laptop well, but when I curls upward from my laptop to my TV via a HDMI cable, I output my laptop displays on my TV but no sound from my laptop on my TV came out. I think the problem is because there is something wrong with my high definition Audio Device. It has a yellow triangle next to him with a! in the middle of the yellow triangle in the Manager of devices under sound, video and game controllers. And when I click on properties on the high definition Audio Device, it says: "this device cannot start. (Code 10) {Operation failed} The requested operation failed. Any help would be great. Is CLEAN Windows 10 installed on a NEW HARD DISK. I HAVE NOT upgraded, windows 10 was clean installed from a disc.

  See if it works...

  Download and install this free utility for files.  The 2nd listed file is 64-bit.

  http://www.7-zip.org/

  Then download and save, but do not run the graphics driver Intel W10 from the support page of your laptop.

  This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp72370.exe

  Right-click on the file of the Intel graphics driver you just downloaded and select 7 - zip from the list of options.

  Have 7-zip extract of: and let it extract the file in the file name (sp72370).

  Go to Device Manager and click on the audio device HD of the problem.

  Click on the driver tab, click on set to update driver.  Select her browse my computer for driver software option and navigate to the driver 7-zip created folder.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

  Then restart the PC.

• Teredo Tunneling Pseudo-Interface - This device cannot start. (Code 10)

  Original title: code10microsoft toledo tunnelling

  We think we've found a driver but we are not sure because he vomits again code.10

  Hello

  1. don't you make changes to your computer before this problem started?

  2. What is the brand and model number?

  If the device has a FailReasonString value in its hardware key, that string is displayed in the error message. The driver or enumerator places this registry string value there. If there is no FailReasonString in the hardware key, you receive the following error message: this device cannot start. (Code 10)

  You can try the following steps and check if that helps you solve the problem.

  Method 1:

  Open the Device Manager and the analysis of new hardware and select 'Show hidden devices' in the view menu and check if you find errors.

  a. Open command prompt with administrator credentials (type CMD and right - click Run as administrator).

  b. Type "netsh" and ENTER.

  c. Type "int teredo" and ENTER

  d. type 'set disabled state' and ENTER.

  e. open the Device Manager and uninstall "Teredo Tunneling pseudo-interface".

  f. Open command with administrator credentials prompt once more.

  g. type netsh + ENTER.

  h. Type "int ipv6" + ENTRY

  i. type 'set teredo client' + ENTRY

  j open the Device Manager and the analysis of new hardware.

  k. Select 'Show hidden devices' in the view menu. You will see now that she is present without errors.

  Method 2:

  If the steps above do not help, you can try to uninstall the drivers of the computer network and reinstall and check if that helps. Before uninstalling the network drivers, make sure that you download the latest drivers on the site of computer manufacturers. Follow the steps below to uninstall the network adapter.

  Follow the steps below to uninstall and reinstall the network card.

  a. click on start

  b. in the type of search box of start of "devmgmt.msc" and press enter

  (c) in Device Manager, expand network adapters

  d. right-click on the network adapter and uninstall.

  e. restart the computer, and then reinstall the network card.

  Note: When uninstalling device drivers make sure you put a check mark against 'delete the driver for this device '.

  I hope this helps.

• Lite-On iHAS124-04 IT burner - DVD "device cannot start Code 10".

  Windows does not work with my DVD writer.  This is the third I've tried and I get the same error message in Device Manager.  "Device cannot start Code 10".  It shows the correct driver and BIOS recognized correctly as a SATA drive.

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• This device cannot start. (Code 10)

  I accidentally deleted my sound driver and have more noise. the error message im receiving to the IDT codec high definition: this device cannot start. (Code 10)

  Hello

  1. what operating system is installed on your system?

  2. did you of recent changes to the system before the show?

  Method 1:

  Follow the link below and follow the steps and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Also, check out the link below and see the description of the error code 10.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  Let us know if it helps.

• IDT high definition audio CODEC. Error: the device cannot start (code 10)

  Original title: IDT high definition audio CODEC

  My Dell Latitude D620 has no sound control or (other than the system beep) volume, the volume control buttons do not work. When I uninstall and reinstall the IDT, I get an error message - "device cannot start (code 10).» Help!

  Hello

  1. have you done any change in software on the computer lately?
  2. What is the brand and the model number of the sound card?

  Method 1.
  Follow the procedure step by step in the article below and check.
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Method 2.
  If the problem persists, follow the steps listed in the article below and check.
  How to troubleshoot sound problems in Windows XP
  http://support.Microsoft.com/kb/307918
  Note: You can visit the website of the manufacturer of the computer to get the latest drivers for Windows XP and install it.
  I hope this helps.

  See also: related errors Description 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Another type of "this device cannot start. (Code 10) "failure

  Environment:

  EM250 Netbook (basically an Acer)

  Windows 7 Starter

  Sansa Clip + 4 GB

  Version V01.02.15A

  Basically, is that the device will not work in MTP mode.  Works very well in MSC, but PSG is necessary because the unit was purchased specifically for use with audible.com audiobooks, and it does not have MSC mode.

  Got the "this device cannot start. (Code 10) "goodbye, looking for inproperties after the driver will not load.  Two "insertion events" beeps during the process

  Tried the "'Net local service localgroup administrators / add" to http://kb.sandisk.com/app/answers/detail/a_id/192 "

  The command was successful, but has not fixed the problem.

  Tried updating all the drivers I could find.  A ran the sansa updater to make sure everything was up to date.

  The device can't the same way on an Acer netbook and similarly on a Windows XP desktop.

  I look at the installation in the control panel Device Manager, you can see the low level driver loading and the portable device become active, but then the level user MTP driver fails.

  from the event viewer, I see the following events associated with inserting

  Event ID 24576 information: "Drivers have been correctly installed for device USB\VID_0781 & PID_74D0 & REV_: 8<>

  25089 Information event ID: 'it was not possible to access the device () after installing the drivers. Error code 0 x 80070651. »

  Event ID 10110 critical: "there was a problem with one or several drivers from user mode and the hosting process is finished.  This can temporarily interrupt your ability to access devices. »

  Event ID 10111 critical: "the device USB MTP Device (location Port_ #0003.Hub_ #0005) is offline due to a user-mode driver accident."  Windows will attempt to restart the Unit 5 times more.  Contact the device manufacturer for more information on this problem. »

  I suspect the key error is the "error code 0 x 80070651.", but I have not found a solution for her online that works

  I tried the technique of driver to uninstall without success.  After the step to "Discover new material" he would miss just the same way.

  I just found a way that worked well.  I have re-installed the firmware.  Not through the Sansa Updater.  This program would simply note that my Clip + release the latest version, then give up.

  Instead I manually re-installed the firmware using the process that the people of Mac and Linux have to use. detailed on the

  http://forums.SanDisk.com/T5/clip-Clip/Sansa-clip-firmware-update-01-02-15/TD-p/150227

  In short, it is to download the zip to show off to

  http://mp3support.SanDisk.com/firmware/ClipPlus/clipplus01.02.15.zip

  Unizip it, then move the two files to the root of the Clip + while it is mounted in MSC mode.

  When he unplugged the updates the firmware.

  I don't know if it was a step necessary or not, but I also reformatted the Clip + menu.  In any case, it now amounts to PSG. mode.

• CD/dvd-rom device cannot start code 10

  I am unable to read the cd or dvd.  I can't copy or the other. Device Manager indicates this device cannot start code 10. Please help me find a solution.  Thank you.

  You can have a couple of damaged registry keys must be deleted.  We provide steps to remove the key using the registry editor, but you must be careful when editing the registry.  Please follow the steps in the link below for the backup of your registry before you open the registry editor.

  Backup of your Windows registry

  Note: Before using this method, uninstall all CD or DVD writing or recording of programs. Delete the corrupted registry entries could cause problems with another CD or DVD writing or recording of programs that are installed on your computer. Uninstall these programs before you start you will help avoid any problems that may remove registry entries. You can reinstall these programs once the problem is resolved.

  This method provides detailed instructions about how to use the registry editor to delete the following corrupt registry entries:

  • UpperFilters
  • LowerFilters

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.
  

  Step 1: Open the registry editor

  • Click the Start orb, type regedit in the Search box and press enter if you are prompted for an administrator password or a confirmation, type your password or click continue

    Step 2: Delete the UpperFilters registry entry

  1. Expand HKEY_LOCAL_MACHINE.
  2. Expand SYSTEM, and then expand CurrentControlSet.
  3. Expand the controland class.
  4. Under category, click on {4D36E965-E325-11CE-BFC1-08002BE10318}.
  5. In the details pane of the registry editor, on the right, click UpperFilters.

     Note You can also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters.

     • If you see the UpperFilters registry entry in the details pane of the registry editor, go to step 6.
     • If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to "step 3: delete the LowerFilters registry entry.»
  6. On the Edit menu, click on delete.
  7. Click Yes when you receive the following message is displayed:
     Are you sure you want to delete this value?

  The UpperFilters registry entry is removed. Step 3: Delete the LowerFilters registry entry

  1. In the details pane of the registry editor, on the right, click LowerFilters.

     Note that you can see a LowerFilters.bak registry entry. You don't have to delete this entry. Click LowerFilters.

  2. On the Edit menu, click delete.
  3. Click Yes when you receive the following message is displayed:
     Are you sure you want to delete this value?

     The LowerFilters registry entry is removed.

  4. Exit Registry Editor.

  Step 4: Restart your computer, restart your computer. After doing this, try to access the CD or DVD drive. If you can access the CD or DVD drive, and if you do not receive an error message, the problem is resolved. You can reinstall your CD or DVD writing or recording software.  Please let us know if this does not solve your problem, or if you have any other questions.  Thank you.

  Shane
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HL-DT-ST DVD + - RW GSA - T11NATA device cannot start (Code 10)

  In the device under device status manager, I get: this device cannot start. (Code 10).  If I try to update driver, I get: Windows has determined the driver for your device is updated - CD-ROM drive.  If I uninstall and reinstall, I get: software device driver is not properly installed, even if it always appears in the warning device manager / exclamation.  Would appreciate some advice.  Thank you.

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• "this device cannot start (code 10)", which means code 10?

  I was alarmed because I could stop my computer because of a 'message' came onto my computer and I was able to get off. So he would'nt stop. I was installing some new drivers with my Scanner Driver Uniblue, when this happened and so I Google'd up Uniblue to see if I could know what I could do about it, and I found there an investigation on the system cleaners and uniblue was last on their list of 5 questioned, and there were a few bad reports on this subject. I also had on my system, cure of Parelogic pilot, who had slipped completely under my guard through an email from the author of 'Math better explained', an e-book that I had downloaded some time ago and I have now seems to be a fake email because when I looked towards the top of Parelogic there was so many complainants and we even said that they do absolutely nothing positive and in fact that their objective is to implant the computers people and they must be reported to the FBI.

  In any case I finally understood how to disable the offending message. But now I'm worried about 10 network cards that have yellow triangles with! "s with the message"this device cannot start (Code 10) ". It's probably just because I have no network connection, but I can't be sure until I have find this code 10 means,.

  Thank you for your trouble,

  calicoghotmail

  Hello calico.ghotmail,

  My apologies for the delay in the response to this topic.

  Code 10 means that a device could not start.

  If there is no network connection on this computer, then this might be a possible reason for this error.

  Let us know if you have any questions.

  Best regards

  Matthew_Ha