Code 10

Windows leave recognizing my burner internal cdvd, code 10

Advertisement

Hello

Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104/

Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.

Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.

Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.

Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit

Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116

The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461

When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052

Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems

CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/

Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems

Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.

Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

===============================

Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.

Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.

Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

-----------------------------------------------------------------------

You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.

Forums - a lot of expert real help
http://Club.myce.com/

CD/DVD units
http://www.myce.com/storage/

Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html

I hope this helps.

Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Tags: Windows

Similar Questions

  • Since iOS 10.0.2 my phone is accessible without the access code

    Since iOS 10.0.2 my phone is accessible without the access code after I pressed the sleep button. Press the home key several times my phone opens. As a first step, it is that he fell asleep in itself not when I used the sleep button but now even after skeep button I can access my phone without the password.

    the rear power and apple support site are not easy to use to report the problem.

    Have you tried to set up your password again in the settings?

  • Playgrounds are learning to code 1 download error

    I recently bought an iPad Mini 2 specifically so that I could use the app to playgrounds to learn about Swift.  Whenever I try to download the playing field 'Learn to Code 1 - basics of the swift' I get an error that says: "not taken download error supported URL.  I uninstalled and reinstalled the soft playgrounds several times.  Other playgrounds (as 'learning to Code 2 - beyond the basics') download very well.  How can I bypass or fix this error and get the first playground of lesson?

    Finally, the playing field is downloaded successfully!

  • Access code is lost as soon as the screen turns off

    When I turn my wrist after that my Apple Watch screen exploded, I need to enter the access code. I turn on the wrist, the screen turns off, I turn back, screen lights up, I need to re-enter the password. And so on and so forth. The watch does not maintain the code.

    I am white white, is not dense hairs on my wrist, no tattoos and I wear the watch very well on my skin.

    The funny thing is: it is a replacement watch, I got today. The other had the same problem, but this is probably because the bottom of the watch with the sensors fell, must have damaged the sensor cable. But this one is brand new.

    Hello

    Make sure the wrist detection is enabled:

    • On your iPhone, in the application of the watch, go to: My Watch (tab) > General > detection of wrist - turn on.
  • I am tryng to buying music on itunes, but it says security code wrong please help

    Hello

    I have problems I want tp purchase music on my itunes bt ts always requires the security code that I don't have it please help

    Check your card information. If they are correct, try to change or remove your Apple ID - Apple Support payment information

  • error code - 50

    I was trying to update my I-phone with IOS 10.02 6.  While it was updating the phone, I received an error code-50.  the phone is now stuck and I can't seem to exit the mode "update."  What does this error code mean?

    Error code - 50 on iPhone

  • What code to replace Quicktime?

    I have an iWeb constructed Web site. http://www.YourSkiCoach.com

    But the videos are inserted for the most part using Quicktime which is interrupted, it seems.

    They appear like this http://www.yourskicoach.com/glossary/SkiGlossary/Pivoting.html

    What code I would want to do a search and replace in Dreamweaver to replace the Quicktime plugin with a youtube embed code?

    Thank you

    Janis

    The method of QuickTime no longer works in some browsers, especially on Apple computers, like the Quicktime player is not supported by default. The HTML5 player should be used instead. Unfortunately some older browsers do not recognize. The player is simpler and not configurable. The code for audio is:

    < audio controls = "orders" source src = "audio.mp3" type = "audio/mpeg" > "

    Your browser does not support the HTML5 audio element.

    < / audio >

    The video player code is

    < video width = "320" height = "240" controls >

    < src = "source movie.mp4' type =" video/mp4">"

    < src = "source movie.ogg' type =" video/ogg">"

    Your browser does not support the video tag.

    < / video >

    (Of course, you don't have to provide two versions, this is just a demonstration script). The URL to the media file assumes that it is in the same folder as the page, otherwise a more complete URL is obviously necessary. The line "your browser does not support...". ' is for display in the case of older browsers that don't support HTML5 - it will not appear in browsers that do.

    Unfortunately, different browsers display output in different ways. With the drive audio Safari does not provide a progress bar; and unlike the player QT player width cannot be configured - for example if you try to fit exactly under a picture. However it should work in most cases - same Safari in Snow Leopard will manage, although I can't answer for what earlier either. I have not tested the video player, but it should work OK in all modern browsers.

  • I had a problem with my iPad 2 Air when I changed my Apple ID password, the problem is, it shows me a Massage says ENTER the PASSWORD, and then said your PASSWORD will be used when the signature with the new device, but when I but the code it shows fail m

    This problem happened to me and it belongs to iCloud and I have used so important, please can someone help me?

    Hello. The access code on your iPad is the code four or six numbers you will need to enter to unlock the device. It has nothing to do with the verification of your Apple ID or two-step. Are you able to unlock your phone? If you are, then please describe the steps that lead to your problem. Since you have changed your Apple ID password, you will need to go to two settings > iCloud and settings > iTunes and app store and sign out of your Apple ID, then connect back with the new PW.

  • Woman updated its iPAD Pro 10.0.2 and is now locked screen display "Enter Access Code, contact ID requires your access code when you restart the iPad." She has no idea what is an "access code". Any help is appreciated.

    Woman updated its iPAD Pro 10.0.2 and is now locked screen display "Enter Access Code, contact ID requires your access code when you restart the iPad." She has no idea what is an "access code". Any help is appreciated.

    If she don't remember: If you have forgotten the password for your iPad, iPhone or iPod touch, or your device is disabled - Apple supports

  • code with the card number when signing in appleid, illustrates that am in a town of 200 miles! How to change location?

    When signing into apple id, code number comes with the map that illustrates this am in a town of 200 miles! Why and how change location? to correct a

    You can not. It does not use location Services. It uses your IP address provided by your ISP (ISP). It corresponds to the IP address to the mailing address of your ISP to "locate" you.

  • Why can't I enter the country code of my phone number for the 2-step verification process?

    I just upgrade my iPhone 6 to 10.0.2. In the home screen, you asked me to provide my phone number to register in the system of validation in 2 steps. However, + 82 (South Korea) is not on your scrolling list.

    https://www.YouTube.com/watch?v=aPFbPt3KGqY

    Hey aramkim80,

    I see from your post that you are not able to enter the country code for the South Korea when setting up for your Apple ID security two-step verification of your Apple ID as much as possible is always a good thing, so I understand your concern.

    Take a look at this article: frequently asked questions about two steps checking of Apple ID. This article presents a list of countries is available in two-step verification. I do not see the Korea of the South on the list of countries currently supported, it's why you're not able to do this.

    Hope that answered this question for you.

    See you soon.

  • Apple ID - forgotten answers security, verification code is not send to my phone

    I don't remember the answers to my security questions, when I request the verification code sent to my phone it can't on my phone, any advice? I know that my login and password but he raises me the questions answered & said now that I've done too many attempts to send a verification code

    Go to https://getsupport.apple.com . Click on "see all products and services", then "Apple ID", then "Apple ID forgotten security issues." If you have problems with this test of this form: https://www.apple.com/emea/support/itunes/contact.html

  • What country code is ZD

    which country has code ZD?

    From what I see, it is not a. Identified and a search on Google.

  • send you the code for the new Apple ID and not the old

    Can you please send the code to the new Apple ID that is dead?

    What is the code? What AppleID?

    You will need to provide more information until someone can offer a solution.

    Writing an effective question of communities of Apple Support

  • How to reset the iCloud security code

    Can you reset the Security Code iCloud until one has the entered incorrectly too many times?

    (I am connected to iCloud on my MacBook and want to connect on my iPad, but am unsure of the security code to use, so I want to reset it on the MacBook.)

    Apple Help topic for If you register your iCloud Security Code wrong too many times... says:

    On a Mac using OS X Yosemite or later:

    Choose the Apple menu > System Preferences, and then click iCloud.

    Click Options next to keychain.

    Click on change the Security Code, and enter a new cryptogram iCloud.

    My prefs do not show 'Options' beside keychain. (Keyring is enabled).

    I have to go through the process of entry that he incorrectly too many times on the iPad before 'Options' will appear on the Mac?

    There is no way to reset the iCloud security code as it comes to Apple servers.  What specific problems you encounter when you try to connect to your iPad?

  • Why open the cover on my iPad Air is more directly shows the PIN code screen

    Hello

    After installing iOS 10, when I opened my iPad original air cover (with magnet) I suddenly need to do something extra to access the unlock PIN code screen. I used to be able to enter my PIN to unlock immediately.

    It's really annoying, that I almost never use the home button on my iPad, simply open the lid is allowed to enter the PIN to unlock and start to use the iPad. Now, I have to first press the home button, it means an additional gesture.

    Y at - it an option to go back to the old behavior again? I really don't like it.

    Kind regards

    Iskander

    Hello

    Some things have moved go in display & its right brightness settings

    The screen lock / unlock.

    See you soon

    Brian

Maybe you are looking for