Code 19 cd dvd not working not not with Windows Vista Business-failure to load the software driver for ATAPI DVD A DH16A6S ATA Device...

Similar Questions

• cannot not to download the software driver for USB connected HP Officejet pro 8500 A909a

  My HP Officejet pro 8500 A909a is NOT a wireless printer.  It is connected via a USB port.

  I tried both find and download the drivers for this printer and also using the wizard to download and installation of HP (hppiw.exe).  The download was interrupted just by using the method and when you use the wizard it correctly identified the printer, but then I get the message

  "the download was cancelled.  You can click the "start over" button to try again. »

  the retry button just returns the same message after a short.

  I'm using a windows 7 PC.

  Thanks for any help

  Hi @Lesly01,

  Welcome to the HP Forums!

  I noticed that you are having problems downloading the software driver for your HP Officejet pro 8500 A909a. I'm happy to help you!

  Here is the direct website for the drivers and full software features. Driver and software of HP Officejet Pro full of features for Windows 7. I would try downloading the software with any other browser. Such as Firefox or Google Chrome, etc.

  I hope this helps!

• Hitachi external hard drive does not work on Sony with windows vista

  I use a Sony with Windows vista laptop. I just got a 500 GB Hitachi external hard drive today. It was detected after that I connected, but there is no way that I can access the hard drive and save the files it contains. I tried to go to the administration tool and tried to change the letters of readers and paths, but this isn't an option for me (he is gray and I cannot click on it). It showed that the disk is healthy but unallocated. Could someone help me please? I really need to back up my laptop using this hard drive external. Thank you. Irene

  Hello Irene,.

  ·         You get the error message?

  ·         Did you do changes on the laptop before the show?

  Follow these methods.

  Method 1: Run the fixit of the article.

  Hardware devices do not work or are not detected in Windows

  Method 2: Follow the steps in the article.

  Tips for solving problems of USB devices

  Method 3: Try to access to the external hard drive on another computer and check if the problem persists.

• Computer does not recognize the driver for HL-DT-STDVDRRWGSA-H2OL ATA Device

  original title: HL-DT-STDVDRRWGSA-H2OL ATA Device

  its as it disappeared from my machine. the computer will recognize the pilot but but the drive does not appear when I go to computer file. If you insert a cd in the drive, it runs but can not read the cd/dvd.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• Envy 15-j059nr: Envy 15-j059nr would not start Windows after update to win10 now the hard drive is missing

  This system worked before Windows 8.1 it has been upgraded to Windows 10 last year. It's my boyfriends computer and last night it kept getting blue screen dreaded with errors on his hard drive. He kept ignoring. Then, his computer's battery died and when he started upward, he could get a blue screen and act as if it would repair itself and would just start all over again. He was going in a loop. He did not know what he was doing, but searched on the Internet and ended up messing around any more.

  Its installation was 850 GB HD 3 partitions, it was set up as a Raid was one the main C drive, one was the restore disc and the other hides. He changed the disk. He changed a few things in bios too, but I don't know exactly what.

  The problelm I have right now, is that when that I boot without the USB bootable media, I created, I'm stuck at a screen that says there is no startup disk and no installed operating system and press F2 to run Diagnostics. When I run the diagnostics, just fine, no errors.

  When I try to recover, repair, reimage or anything other that to reinstall, it goes back to the screen I mentioned above which does not allow me to do anything about this either, with the exception of past at the command prompt, which is X and not C. I did a dir/w and only seen the windows files are here , but under the users directory, documents and images are empty, so don't know if it's even watch what I think it is.

  When I want to install Windows 10, everything goes smooth and then bam, he wants that pilots. I can't find the drivers for this laptop who don't have the .exe and require installation. This notebook is not a CD/DVD player on it. I don't mind doing a reformat and start all over, if I could recover his pictures on his hard drive. They are his grandfather.

  Help, please!

  Thank you in advance!

  AggieFan378

  You are the very welcome.

  Unfortunately, I woudn't be able to help you with that.

  I'm afraid that the PC is now a useless paperweight because of the BIOS update has failed.  There is usually no recourse other than to replace the motherboard.

  If all goes well, you were able to recover the files before that happened, and if not, get a SATA cable adapter USB and read the hard drive on another PC.

• Filter of device drivers are corrupt (ATAPI DVD A DH16A6S ATA Device)

  How can not solve this problem

  Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• Epson Perfection 2580 Photo Scanner not working not not with Windows Vista Home Premium SP1

  I tried to install my scanner software that works with my XP operating system and does not work with Vista.  Using the Epson Smart Panel software, I was able to scan slides and negatives as well as regular photos.  Is there some way I can load Epson Smart Panel and Epson Scan with Easy Photo Fix to my software disc software scanner Epson XP and then get Vista patches to make it work?

  This is the site I used
  http://www.Hamrick.com/sup.html
  You can download it for free to try and then buy if it works.  He was also well answer the questions I sent an e-mail to him.
  I hope this is a help!

• Can not reinstall the software/driver for the Officejet 6500 all-in-one

  I tried to 'day' the pilot on my all-in-one e710n-z printer 6500, and now I have no printer to work at all.  Installation stops at about 80% complete giving the error: Network Installation fails.  I followed all the procedures including online uninstall them, winsock reset, reinstall, install HP utility failure, disabled anti-anti-virus/firewall... nothing works.   My printer is detected by the computer and he "wants" install, but nothing works!  Wi - fi is on, and the only thing that I miss is the driver.  What is the secret of installing the HP online support site?  With the help of Windows OS 8.1.  Thanks for any help!

  Thank you so much for offering to help... This has been a very frustrating experience where I felt like I more, more was wrong.   It turns out that I solved the problem myself with a lot of trial and error and perseverance.  The location of the printer and our computers would not have allowed practical USB or ethernet connection tests.

  The computer has been grateful to the printer, but few of the functions of the printer did not work.  I kept getting notices that I need to be connected to Internet... and yet I was.   Instead, I followed every remedies proposed, and finally met and installed the HP Print & Scan Dr.   The full program would not even install, but I did use uninstall and reinstall the feature on the Dr. P & S and I noticed several MB difference between program he installed and which had been installed until then.

  The error kept showing a network connection problem, but I had already restarted the router several times.  When I got to the printer, I had loaded it a stable and permanent address through the router, so every time I "uninstalled and reinstalled then" software, it always by default the preset number on the router... that has been a blessing!  Finally, I got on the Web site of the real, connected and re-configured router the network connection on the printer using the PIN # that was generated (the WPS buttons had failed earlier) However, it happened, the resumed printer connected and I was able to print a test page.  All is well again.

• Virgin Mobile Broadband2Go not with Windows Vista Home Basic Edition

  I have a device Broadband2Go, MC - 760, which installed fine, but when I try to turn on or connect the device, I get a message saying 'system could not update the phone book file', and then a Mobilink3 crashed to message.  Any ideas?

  Hello

  Follow the steps in this link that talks about the same issue (can not be specific to Vista).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/getting-message-cannot-update-the-phone-book-file/5409f550-1a49-4233-b38c-4ac3ddf7c94c

• discs made with WIndows XP, but none does not work with Windows Vista

  I have many discs made with windows XP and now none will work with windows VISTA, does anyone have an idea, I tried for weeks now, alll over the internet, but nothing, can someone help, because I need these files on CD RE-WRITER and RE-ENGRAVER of DVD discs.

  Hello

  ·         You get the error message?

  Follow these methods and check if that helps:

  Method 1:

  I suggest you run the Microsoft Fixit tool from this link and if it helps.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems

  Method 2:

  Follow the steps in troubleshooting this article and check if that helps:

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista

  http://support.Microsoft.com/kb/929461

• Webcam USB 2.0 on my laptop with windows vista error device does not work correctly

  Original title:

  I just plugged a usb2.0 webcam on my laptop with windows vista. It is loaded ok, but the device manager says that the device does not work correctly. Any ideas please.

  I just got a webcam via ebay and plugged into my laptop. I'm working on windows vista. He finds and load device software right away, no problem. But I can't work. go into my device manager it tells me that the device does not work correctly. Any ideas please.

  Hi Matthew,

  The first thing I would try is to connect the webcam to another computer to make sure that the webcam is not defective.

  Now, check out these links and return to the State of the question.

  When hardware installed in or attached to a computer doesn't work properly, it is often because of a driver problem.

  Here are a few common problems with drivers and the means to solve them.

  See the following link for more information:

  Tips for solving common driver problems

  Also check out the following link and run the fixit available.

  Hardware devices do not work or are not detected in Windows

  The fixit diagnose and solve problems with the equipment. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.

• Windows Vista Business still don't not patched with SP1 via auto-mises to update or manual updates

  Our laptop Fujitsu is installed with Windows Vista Business. We have been used for about 1 year more, get the updates via automatic updates.

  I read that Vista has up to SP2. But check the details of the system shows that no service pack has been applied. So I trigger the update via IE-> tools-> Windows Update. He said that "no important updates available.

  I think that when you apply SP1, it will move from IE7 to IE8. So, we still have IE7.

  Why the service pack is not available for our case?

  Kind regards
  Ben

  A1. Yes.

  A2. You are 'safe' for now, as long as the computer kept fully patched to Windows Update otherwise. That being said, there will come a time in the not-too-distant that a computer without SP1 installed will not offer still updates all founded. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Now my Toshiba Windows Vista Business OEMA is not authentic. Why?

  Today, my genuine Windows Vista business, after you run the usual windows update, is displayed in the Office a message. "" This copy of Windows is not genuine ". He has never happenned before and my laptop has a label in the back with the product as a Toshiba OEMA key. The pc (where I'm typing this message) is a Toshiba Tecra M10 authentic PTMB3E!

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag tool
  (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you a) in the case of your machine (or inside the battery compartment), but does NOT quote the key on the sticker!
  http://www.Microsoft.com/en-us/howtotell/hardware.aspx

• Working in partnership with Windows

  Working in partnership with Windows

  Hello

  ·         What is the problem you are having?

  ·         What operating system is installed on your computer?

  ·         Are what partnership you referring?

  You can also visit the link of the article of Microsoft that will guide you on how to ask questions below.

  How to ask a question

  http://support.Microsoft.com/kb/555375

• This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Original title: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in the graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel, what do I do to fix this help please.

  Jake

  Hey Jake,

  Follow these methods.

  Method 1: Follow these steps:

  (a) restart your computer if you have not already done so. There is always the possibility that the error Code 31 that you see was caused by a temporary problem with Device Manager. If so, a simple reboot can solve the Code 31.

  (b) have you install a device or a change in the Device Manager, just as the Code 31 error appeared? If so, it is very possible that the modification caused the Code 31 error.

  (c) cancel the change if you can restart the computer and then check again the error Code 31. Depending on the changes, some solutions may include:

  Remove or reconfigure newly installed unit.

  Restore a version prior to updating the driver.

  Use system restore to undo the Device Manager recent related changes.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  (d) to remove the registry values filters upper and lower. A common cause of errors in Code 31 is the corruption of two registry values in the class of the CD-ROM/DVD-ROM drive registry key.

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: Update the latest graphic drivers.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly