Code 19 for my CD drive.

Similar Questions

• Error code 39 for CD/DVD drive

  Original title: no CD/DVD drive

  I can't play any CD or DVD tried uninstall/reinstall, but get error code 39 ideas? Thank you

  Hi johnhealey,
   
  Run the fix it tool of the article given below and check if this can help fix the problem.
   
  Your CD or DVD drive is missing or is not recognized by Windows or other programs

• How can I fix error code 19 for my CD drive?

  Recently, I tried to watch the videos on my CD player, and it did not work. I tried to fix it myself (I'm a novice of the intellectual-IT property, at best). I tried Device Manager, and he gave me a message that the configuration in the registry has been damaged or removed (code 19). How should I do?

  Hello

  Try the microsoft 'fix - it' for your problem below

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  and read this information too

  http://support.Microsoft.com/kb/982116/en-us

• error code 10 for HD Audio driver

  Audio displays a red x at the bottom of the screen and tried microsoft auto difficulty but still does not work. What can I try to get the audio to work.

  Go to the Web site of the manufacturer of your computer laptop/computer/Sound card > drivers and downloads Section > key in your model number > look for the latest Audio from Vista drivers > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• receiving error code 39 for dvd, driver will not load.

  replace corrupt cdrom.sys

  small management business of vista 32 bit.  receive error code 39 for dvd.  driver will not load.  I tried to uninstall.  same question on re - start.

  I tried regedit suggestions.  UpperFilter deleted, no lower filter exists.

  In addition to the above on the excellent advice, cdrom.sys is not corrupt.

• How to get the code produced for my Windows XP disc if I have the drive?

  Acquisition of Product Code Windows XP

  How to get the code produced for my Windows XP disc if I have the drive?  I signed the BONE when I bought it all first, but have no way of knowing if this is the way to receive a copy of the product key.

  Here are some utilities, which will display your product keys:

  Belarc Advisor: http://www.belarc.com/free_download.html
  (He did a good job of providing a wealth of information.
  However may not detect a key to office, then try one of the other two below)

  Also: http://www.nirsoft.net/utils/product_cd_key_viewer.html
  and: http://www.magicaljellybean.com/keyfinder.shtml

  Paid (free demo is available): Recover Keys: http://recover-keys.com/
  "quickly scans your system for more than 3000 + software '.
  and produces a list of software activation keys.

  13 keyfinder programs:
  http://pcsupport.about.com/od/productkeysactivation/TP/topkeyfinder.htm

  J W Stuart: http://www.pagestart.com

• Get a Code 10 error "this device cannot start' for my optical drive

  Hello

  I am running a Dell Studio 540 with the following specifications:

  Processor: Intel Q6600 @ 2.4 GHz

  RAM: 4 GB

  HD: 750 GB 7200 RPM SATA

  Graphics card: nVidia 9800GT 512MB

  OS: Windows Vista Home Premium 32-bit

  All the drivers and BIOS are up-to-date.

  My current optical drive is an Optiarc DVD +-RW AD-7200 s ATA Device Unit which has now disappeared from "My Computer". By opening the Device Manager, it has a small yellow triangle with an exclamation mark inside. When I click on it that a new window will open and in the device status area, he said:

  This device cannot start. (Code 10)

  Currently, I have tried two methods without success. First, I downloaded the latest drivers/firmware for the optical drive directly from the Dell Web site, but to try to install, I get an error box saying that the "target drive is not properly".

  I also ran the Mats_Run.devices of the Microsoft Automated Troubleshooting services who correctly identified the problem, but said he could not address them and directed me to these forums.

  Any help would be greatly appreciated.

  Thank you for your time,

  Donald Lundie

  Hello

  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  As you have already tried updating the drivers for the device, you can just go through the article that talks about the Code 10 error.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104/

  You can run the fix in the below article data and check if this is useful.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The TOSHIBA for Bluetooth ACPI driver update failed

  Hi all

  I have a P870 running on Windows 7 & until recently BT worked fine, now it doesn't.

  When I tried to download the latest version of the driver it says that I have the latest version of the driver.
  He also says that the device is functioning properly.

  It does not recognize my S4 where before he did.
  I now can not get it to pair because he does not see.

  When I did the last update of MS that I noticed the results put BT update failed, as shown below.

  Any ideas on a fix would be appreciated.

  The TOSHIBA for Bluetooth ACPI driver update
  Installation date: 08/08/2015-09:37
  Installation status: failed
  Error details: Code 80246005
  Update type: recommended

  This driver has been provided by TOSHIBA for the support of Bluetooth ACPI

  More information:
  http://sysdev.Microsoft.com/support/default.aspx

  Help and Support:
  http://support.Microsoft.com/select/?target=hub

  BT is activated using the function keys?

  What is the status of the Bluetooth technology in Device Manager?
  You see errors, some yellow exclamation?

  What you can do is use provided by the windows system restore and backup option and return to the point of time at the beginning, before the update have been installed...
  No doubt this has problem of BT

• Code example for single asynchronous reading of multiple waveforms

  Hello

  I looked around but have not been able to find the code example for single asynchronous reading of multiple waveforms.  Could someone point me in the right direction?

  Thank you

  Dale

  Hi Dale,

  Have you looked at the code using .NET Framework DAQmx example? It shows this code:

  class DAQmxAsyncRead
  {
  private AnalogSingleChannelReader reader = null;

  public DAQmxAsyncRead (task t)
  {
  Create the drive
  Reader = new AnalogSingleChannelReader (t.Stream);
  Acquire 100 samples
  Handful of IAsyncResult = reader. BeginReadMultiSample (100, New AsyncCallback (OnDataReady), null);
  }

  Public Sub OnDataReady (IAsyncResult i)
  {
  Recover data that has been read.
  At this point, all that occurred during the asynchronous read exceptions are thrown
  Double data = reader. EndReadMultiSample (i);

  You can call the method BeginReadMultiSample here once again
  }
  }

  In addition, this article: http://digital.ni.com/public.nsf/allkb/485201B647950BF886257537006CEB89?OpenDocument talk about different causes of the reserved resource error.

  Kind regards

  Alexandra Valiton

• IS THERE A LIST OF THE DRIVERS THAT MATCH A FAILURE CODE? FOR EXAMPLE (0XDEEDFADE)

  IS THERE A LIST OF THE DRIVERS THAT MATCH A FAILURE CODE?  FOR EXAMPLE (0XDEEDFADE).  «I GET THIS WHEN I TRY TO CONNECT A RECORDER APPLICATION MY PC (WITH CODE SCREEN BLUE DEATH "DRIVER IRQL-NOT-DONOR-BASED EQUALITY).»

  [Moved from comments]

  There is no error like code: 0XDEEDFADE

  Usually due to a bad driver, or a faulty or incompatible hardware or software. Use the general troubleshooting of STOP the Messages above checklist. Technically, this error condition means that a kernel-mode process or driver tried to access a memory location to which it did not have permission, or at a kernel interrupt request level (IRQL) that was too high. (A kernel-mode process can access only other processes that have an IRQL lower or equal to, its own.)

  Make sure you uninstall and reinstall the drivers using the following general method.

  First of all, download the latest driver. Then perform the following steps.

  Click on Start Menu

  Right click on my computer/my computer

  Click on manage the

  Click Device Manager in the list on the left

  Find the device you are trying to uninstall by expanding the game appropriate device (network adapter/IDE ATA / ATAPI controllers)

  Right click on the device

  Click on uninstall (do not click OK in the dialog box that opens after hitting uninstall it)

  Put a check mark to remove software driver for this device (if this option is available, if not, just hit OK) and click OK

  Restart your computer only if Windows asks you to.

  Install the latest driver for the device.

  You can also:

  Sign in as an administrative user.

  First of all, download the latest driver. Then perform the following steps.

  Click on Start Menu

  Click on Control Panel

  Click on hardware and sound

  Click device (the last link under devices and printers) Manager

  Find the device you are trying to uninstall by expanding the game appropriate device (network adapter/IDE ATA / ATAPI controllers)

  Right click on the device

  Click on uninstall (do not click OK in the dialog box that opens after hitting uninstall it)

  Put a check mark to remove software driver for this device (if this option is available, if not, just hit OK) and click OK

  Restart your computer only if Windows asks you to.

  Install the latest driver for the device.

  My system specs

  System manufacturer/model number HP Pavilion e9110t

  Windows 7 Home Premium 64 Bit operating system

  Processor Intel (r) Core (TM) 2 CPU Quad Q9550 @ 2.83 GHz

  Card mother Pegatron IPIEL-A3

  6,00 GB Hundai HMT125U6BFR8C-H9 memory

  Graphics card ATI Radeon HD 4850

  Its Realtek High Definition Audio card / ATI High Definition Audio

  Monitor (s) displays Acer AL2216W

  Screen resolution 1680 x 1050

  Keyboard HP keyboard

  Mouse HP mouse

  Unknown/installed by HP POWER supply

  Generic HP case

  Cooling Stock Intel cooling

  Hitachi HDP725050GLA360 ATA Device 500 GB hard drives

  Internet download speed: 19.15 Mbps Upload: 1.67 Mbps

  Another news network adapter D Realtek RTL8168D/8111 Family PCI - E Gigabit Ethernet NIC (NDIS 6.20) network adapter 802.11n Wireless PCI Express Card LAN Adapter

• Code 31, for my 2 GB USB - stick USB Device Manager,

  Hello world

  I use a HP pavilion a610t, 32, Vista premium edition, 2. 4 g, 3 G of ram, w, 4USB ports. I installed a gang self-powered USB 2.0 w/10 usbs, sometimes it turns on at startup, sometimes not and I re - plug for my system to recognize. I don't see the error messages for the band, but I got an error for 2G USB - stick in the Device Manager: code 31, tried to reinstall a driver or driver update, but it says driver is up to date. the appliance works once it is on. Is that what the problem of the USB - stick or tape USB? Also, at startup I get all my other USB devices including media Pocket Bay K: entry w/PC OEM pop ups asking what I want to do and if I want to scan or to execute without scan, I tried scanning to see and it did nothing, I didn't not lose my media in the device either. I also code 10 for my reader to CD-DVD E: that ejects and turns but does not load the driver so I don't see anything, I tried all the suggestions, reload driver, Plug connections, high-low own filters, re - install the driver, all to nothing does not. Device Manager still shows my drive with a flag and error 10 (driver may not load) are 2 separate issues but I have listed both, because they may be related, I want to understand the thumbdrive, firstly because it is a new problem, and I use my allot USB drives to save all my important files. The problem with the drive, I tried all the suggestions so far, if someone has any ideas to help I would be very grateful
  Thank you all, boulonman/Alan

  Hello

  It doesn't seem to be a model available in HP you specified.
  See the site:
  http://h10025.www1.HP.com/ewfrf/wc/pfinder?cc=us&DLC=en&LC=en&tool=&query=HP+Pavilion+a610t#n41
  I suggest you to check the model number again.
  The CD/DVD software burning should be uninstalled to uninstall or change a program and not Device Manager.

• Error code 19 for my ROM... The drivers are up to date... How can I fix it? Thank you...

  I get the error code 19... My drivers are up to date... How to fix this?

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.

  Normally the above will solve this problem otherwise working your way down through them, even if you did
  them before.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista
  After starting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Code 19 cd/dvd-rom drives is no longer recognized by windows

  I have referred to these readers as R: and S:, they do not appear when I open 'my computer '. None of my media players see these discs. Earlier, I would put in one of these drives dvd or cd, and immediately started to my Media Player nominated. Thank you.

  Hello

  It is not uncommon, in fact more expected than a question as this affects both drives.

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Having too many CD/DVD programs can cause strange problems, especially if they're loading of parts of them.
  Selves at the start because they will be competing for resources. This does not mean that this problem was caused by
  These however is a possibility depending on which and how many you have installed.

  -------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• Replacment for X61s ssd drive

  Hello

  I am looking for replacement ssd drive for my Lenovo X61s. Initially, I decided it's going to be Intel X - 25 V 40 GB or 80 GB X 25 - M.

  I found the following Intel with apparently the same settings on the SSD market. I have visited many sites, I searched and there is no explanation of the codes and how they differ. Maybe some of you has such a comparison.

  Intel X 25 - M 80 GB SSD 2.5 "SATA MLC (SSDSA2MJ080G2C1).

  Intel X 25 - M 80 GB SSD 2.5 "SATA MLC (SSDSA2MH080G2R5) BOX.

  Intel X 25-M 80 GB SSD SATA (SSDSA2MH080G2C1)

  Intel X 25 - M 80 GB SSD SATA2 2.5 "SSDSA2MH080G2K5 (909118).

  Intel SSD X 25-M 80 GB MLC SATA 2.5 inch (SSDSA2MH080G1C1)

  Intel SSD X 25-M 80 GB SATA2 ML C (SSDSA2MH080G1C5)

  Intel X 25 - M 80 GB SSD SATA2 2.5 "MLC (906102).

  Prices are fundamentally different and it sort of the same X 25 - M 80 GB. I can't understand which is 7mm and 9.5 mm in height. I'll try to change a HARD drive in the laptop Lenovo X61s and don't know which suit you best.

  Your

  MH is the original G2, MJ implements NAND for OEM cusomers level, no increase in performance. The R5 is the retail, includes desktop Board supports, the C1 are OEM (drive only). You should at the very most, 9.5 "high road (height of the standard Player 2.5").

• Code 31 for several drivers.

  Original title: I get code 31 for several drivers

  I get code 31 on several drivers, including V9 drivers and when I troubleshoot it shows each issue with the driver separately and gives the possibility to fix it by reinstalling. It does not work.  When you try to update I get the message that I have updates. I've also not receive my updates until I ran C Cleaner, that allow to download updates, but this does not solve the drivers with the code 31.

  It is the superior of the pilots numbered if this is useful (e.g. 103/273 etc..).

  Y at - it a fix for this problem. I have seen those already mentioned.

  Tommy

  Hello

  Thanks for the update on the question, I apologize for the delay in response.

  The Windows updates fail to install? Please provide the number of KB.

  Also, follow the steps below:

  Step 1: Run the Troubleshooting Windows Automatic Update tool.

  Troubleshoot Microsoft Windows Update

  Step 2: Check out the link and follow the troubleshooting methods to resolve the problem:

  You can also view: the problems with installing updates

  Note: Data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Let us know if you need more assistance. We will be happy to help you.

  _______________

  Thank you best regards &,.

  Isha Soni