Code 641 for Microsoft updates

I am running Vista Home Premium on my Dell laptop. Try to load Microsoft Updates and get Code 641 on two specific updates. This has happened a couple of weeks, and I finally did a total reload (OS) of the system, which seems to fix the problem. But now occurs again. As an activity complementary to this problem, I am also unable to uninstall progs.

Hello

Method 1
I suggest you try the steps from the following link:

Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update
http://support.Microsoft.com/kb/968003

Note: When you perform an anti-virus online, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.

Method 2

I suggest you to scan SFC. Scan SFC will be scans all protected system files and replaces incorrect versions with appropriate Microsoft versions.

How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833

Method 3
If Windows update is missing, try to register the following Dll files and check for existence of Windows Update service.

Regsvr32.exe c:\windows\system32\wuaueng.dll
Regsvr32.exe wuaueng1.dll

Method 4
I suggest you try the steps from the following link:

Error message "Could access the Windows Installer Service" when you install the application

http://support.Microsoft.com/kb/319624

Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows Vista

Tags: Windows

Similar Questions

  • I get code 641 for my updates, KB2604111, 2604121, 26566368, 2656405, 2686827

    USED FIXIT DID NOT HELP, CAN GET TO IPLEASE LITTLE HELP WITH THIS I AM NOT GOOD FIXATION OF COMPUTERS, I HAVE VISTA 32-BIT, AND UPDATES

    ; KB2604111, 2604121, 26566368, 2656405, 2686827

    System Mechanic has caused the problem & you have lots of company! [1]

    See my colleague Maurice RESPONSE message in this thread: http://answers.microsoft.com/thread/d6fedf33-dc1b-451f-9aab-97429f916180

    If still no joy, contact System Mechanic (iolo.com) supported for assistance-, they are well aware of the problem posed their candidacy.

    TIP: If you think that more never your registry database needs to be cleaned, repaired, boosted, to the point, healed, twisted, fixed, magnified, "swept" or optimized (and even more to convince that it is not), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

    =====================================================================
    [1]

  • error code 646 for the updates of Microsoft office

    error code 646 for Microsoft office updates KB949710, KB951550, KB973593, KB950130, KB951944, KB973704, KB974561. Help, please

    Try this for your error Code 646 and read ALL the messages/solutions to your problem on the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/f3390e74-9961-4AAE-8a05-554c1a9cf1a2

    Read the info on the above link to error Code 646.

    With the compliments of: David_O - Support Engineer

    This problem occurs when the agent Windows Update Wups2.dll file is incorrectly registered in the registry. Because registry files that correspond to the Wups2.dll file are missing, update facilities have failed. There are two methods to resolve this issue, use method 1 first, and if it did not resolve your issue, go to method 2

    Method 1: Save the Windows Update files

    1. click Start and type notepad in the box start the search .

    2. click on Notepad in the programs list.

    3. copy the following commands, and then paste them into the opened Notepad window:

    REGSVR32 WUPS2. DLL/S
    REGSVR32 STINKS. DLL/S
    REGSVR32 WUAUENG. DLL/S
    REGSVR32 WUAPI. DLL/S
    REGSVR32 WUCLTUX. DLL/S
    REGSVR32 WUWEBV. DLL/S
    REGSVR32 JSCRIPT. DLL/S
    REGSVR32 MSXML3. DLL/S

    1. in Notepad, on the file menu, click on record under.

    2. in the list record under , click all files.

    3. in the file name box, type register.bat.

    4. save the Register.bat file to your desktop.

    5 right-click the Register.bat file, and then click run as administrator. Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password or click continue.

    6. try to install the updates again.

    Method 2: Download and install Windows Update agent

    For more information about how to download and install the latest Windows Update agent, click on the number below to view the article in the Microsoft Knowledge Base:

    949104

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the above does not help:

    You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include this error Code, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon

    Mick Murphy - Microsoft partner

  • error code 80070673 for windows update for vista

    error code 80070673 for windows update for vista

    Hello Jwisetoyo,

    Thank you for your message.  Please click HERE for a possible solution to your problem.

    See you soon

    Jason H. Engineer Support of Microsoft answers visit our Microsoft answers feedback Forum and let us know what you think.

  • Error Code C800044E for Windows updates.

    I get this error code c800044e for Windows updates. I tried the support center to the bottom of the load and fix, but it does not resolve this error. Help, please.

    Hello

    1. all the troubleshooting steps have followed so far?

    2. the updates could not be installed?

    3. what fixit did you run?

    4 have have there been recent changes made on the computer before the show?

    I suggest you to follow the steps mentioned below and check if it helps.

    Method 1: Put the computer in a clean boot state and try to install the updates.

    http://support.Microsoft.com/kb/929135

    Note: After installing the updates, follow step 7 in the link provided to return the computer to a Normal startupmode.

    Try to download the update and install.

    Download Center.

    http://www.Microsoft.com/download/en/default.aspx

    Method 2: If the problem persists with Windows updates, the problems with the installation of the updates.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

    Method 3: How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    Then try to reinstall updates.

    I hope the information is useful!

  • Error code 80072EFF for Microsoft Windows Update in Windows XP.

    Long story short... Downloaded a virus called Defender of window that turned out be the Malware virus. A representative Norton remove computer virus. Now, I'm unable to use my Microsoft Windows Update program and don't get error code 80072EFF or when does it through the computer I am connected to Internet explore with a message that says: cannot CONNECT to THE SITE. Need help restoring this program on my computer.

    Any ideals or help would be great.

    Are you running WinXP SP2 or SP3?

    How rep Norton to determine that the computer is clean now? Did you have to pay for this service?

    ~~~~~~~~~~~~~~~~~~~

    You may encounter temporary connection related errors [e.g. 0x80072EFF0x80072EFE 0x80072EFD; 0x80072EEF; 0x80072EE2; 0x80072EE7; 0xC80003FA; 0x8024402F; 0x800705B4] when you use Windows Update or Microsoft Update to install updates
    http://support.Microsoft.com/kb/836941

    How to remove malware belonging to the family Rootkit.Win32.TDSS (aka Tidserv, TDSServ, Alureon)?
    http://support.Kaspersky.com/viruses/solutions?QID=208280684

    How to reset the Windows Update components?
    -Online skip the section to APPLY to if Win7; Access KB971058 via Internet Explorer (32-bit) only. Run the difficulty in DEFAULT and AGGRESSIVE modes, then restart [1]
    http://support.Microsoft.com/kb/971058

    ~~~~~~~~~~~~~~~~~~~~~~
    [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or updates installed (Vista & Win7).

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Error code 646 install Microsoft update of security for Microsoft Works 9 (KB2680317)

    I have an update from Microsoft for Microsoft Works 9 (KB2680317) security

    You may have to restart your computer for this update is taken into account.  I restart the computer and install it is still there.  I tried Miicrosoft Fiix and nothing has worked.  I did a system restore and that didn't work.  I don't know what else to try.  Please someone out there can help.
    Update type: Important
    A vulnerability of security in Microsoft Works 9 that could allow arbitrary code to run when opening a file modified for malicious purposes. This update resolves this vulnerability.
    More information:
    http://www.Microsoft.com/technet/security/bulletin/MS12-028.mspx
    Help and Support:
    http://support.Microsoft.com/kb/2680317

    [Transferred from Internet Explorer]

    Hello

    1 are there any changes made recently to the computer?

    2. What are the steps that you have already tried to solve this problem?

    I suggest you try the following steps:

    Method 1.

    If you have already tried Microsoft Fixit then try Troubleshooting Manual.

    You receive the error code: 0 x 80070646, error code: 646 or error code: 1606 when using Windows Update or Microsoft Update

    http://support.Microsoft.com/kb/2258121

    Registry warning

    To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/)

    How to back up and restore the registry in Windows

    Method 2:

    Run the fixit available in the link below to reset windows update components. 

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    Registry warning

    To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/)

    How to back up and restore the registry in Windows

    If you still have questions, then follow

    Problems with installing updates
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

    Hope this helps you.

  • Error Code 80071AA7 application Microsoft update - Cumulative security update for Internet Explorer 8 for Windows Vista (KB2618444) ""updates can not be configured. " Changes in return ".

    OK, I'll be back and I see your scary prognosis. I guess it would take some time to complete because it invovled five years of updates from McAfee to be reinstalled. If it takes about an hour, I should be able to get this done.

    I have reviewed your steps again and have a question before I enter into it-

    Given that this procedure you built has several reboots, how can I stop Windows trying to do the update of KB2618444 during each reboot of the tel? According to your interior, the update in question should be attempted that after reinstalling McAfee is carried out correctly, right?

    See you soon.

    Repost...

    The computer must NOT be connected to the internet or local area network (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

    Given that this procedure you built has several reboots, how can I stop Windows trying to do the update of KB2618444 during each reboot of the tel?

    Don't worry about this. In any event, step #11 "purges" the queue KB2618444.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Comment: IMHO, McAfee Security Center is one of the worst (if not the worst) & most precarious security market suites. A casual survey of the malware removal forums shows that AVG Free is installed on most of the computers infected with the suite McAfee runs a close second.

    [There is a reason that so many ISPs around the world offer McAfee Security Suite as a freebie: customers get this that they don't pay for.]

    If it was my computer, I would install Microsoft Security Essentials (free) instead of reinstalling the suite McAfee at the #3-Oui stage, even if the subscription does not expire until September 2013.

    ===================================================================
    WARNING: Displayed AS IS without any warranty. MS MVPS represent or work for Microsoft

  • Code 646 for Microsoft office 2010

    I get a code 646: definition update for Microsoft Office 2010 (KB982726), 32-bit edition. I have a Sony Vaio with windows 7 Home premium.

    the KB includes an automated fix 50461 which corrects the problem, look here: http://support.microsoft.com/kb/2258121>

    Suggest you download and save the fix it.

    Then close all open programs and browsers before running MSFix it 50461.msi.

    Let me know if this helped.

  • Error code 00000646 on Microsoft updates

    I tried to download these updates and I kep receive an error code 646. I have e hepatitis was www.microsoft.com/download site but I can't find these updates.

    Update for Microsoft office Excel KB973593-security
    Update of security for 2007Microsoft office system KB973704
    Update for Microsoft office Word 2007 KB974561
    Update for Microsoft office infoPath 2007 KB976416
    Update for Microsoft Works 8 KB977304 security

    I had problems before update and someone gave me a site I could update each of them individually.

    Help, please!

    Thank you

    The current workaround is to download updates and manually install the same for office etc. products.

    Start here: http://www.microsoft.com/downloads/en/results.aspx?freetext=KB973593&displaylang=en&stype=s_basic

    K TaurArian [MVP] 2005-2010 - Update Services

  • Install error code 646 for security update has failed. I run Windows Vista

    I tried to install six important updates. One is an update of security for Microsoft Works 8.
    Then I updates security for Microsoft Office Outlook 2007, Microsoft Office Visio Viewer 2007. I have two updates of security for Microsoft Office System 2007. I have an update for Microsoft Outlook 2007 Junk e-mail filter. I get an error code. The code is 646.I error code tried to install these updates since 10/16/09.

    Whenever I try to install these updates, I get the same error code 646. I tried since 16/10/09. When I stopped my laptop updates try to install and they fail. When I go to help and support he told me to accept the terms, but the screen is never the same. I'm at my wits end. How can I fix the problem. It is the first time that this has happened.

    Hello

    Try this 1st to see if it helps: (it usually does)

    Description of the Patch registration cleanup tool
    http://support.Microsoft.com/kb/976220/

    ------------------------------------------------------

    If necessary:

    Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
    or the update itself - double click a view more information (or click top then discovers on the right)

    Those who will take you to a page where you can download the update.

    Or go here and the KBxxxxxx number to download it.

    Download Center - mount the KBxxxxxx.

    Microsoft Download Center
    http://www.Microsoft.com/downloads/en/default.aspx

    Download - SAVE - go to where you put them - click on - RUN AS ADMIN

    Then you can right click on the update in the updates Windows and HIDE.

    If you get an error Installer install this version:

    Windows install 4.5 Redistributable
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

    ----------------------------------------------------

    Then run this:

    How to reset the Windows Update components? -a Mr Fixit
    http://support.Microsoft.com/kb/971058

    Description of the preparation tool update for Windows Vista for Windows Server 2008 and Windows 7 system
    http://support.Microsoft.com/kb/947821

    ------------------------------------------------------------
    Because these are all Office updates you might get more information if necessary in the groups of the Agency who could
    have experienced the same problem.

    Office newsgroups
    http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

    Microsoft.public.office.misc discussions
    http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

    ------------------------------------------------------------

    If necessary you can incident free get reports however the above should take care of it for you.

    Windows updates - free Incident report

    Go here and click on-> Windows Update fails while searching, downloading or installation of updates
    http://support.Microsoft.com/GP/wusupport#tab3

    The security updates, you can get free support Incident report
    http://www.Microsoft.com/protect/resources/support.aspx

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Error code: 80073712 for the update failed

    Original title: Windows update problem.

    After trying to install the updates for my windows vista, whenever it says update failed with error code 80073712, when looking in it, he says the windows component store is damaged, how can I fix this plse. I would be very gratefull if someone could help me with this please, I'm not very good with computers and do not want to do something wrong with it.

    Hello

    S ' it works well before?

    -Did you make any changes before this problem?

    Method 1: I suggest you to consult the Knowledge Base article and check if it helps:
    Error message when you try to install updates on the Microsoft Update or Windows Update Web site: "0 x 80073712" http://support.microsoft.com/kb/957310

    Note: When you perform a repair in accordance with method 3 installation in the article, this restores the current installation of Windows Vista in the version on the installation DVD. This requires you to reinstall all updates that do not appear in this version of Windows Vista.

    Method 2: I suggest scanning of auditor of system (CFS) files on your computer and see if it helps fix the problem.

    Check out the link for more details below:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  • Error code 8007663 for the update KB2539530... Help, please

    For the last 3 months or so, 1 update has been problematic.

    This update is "Update for Microsoft Office System 2007 (KB2539530)".  It starts by creating a restore point and then stops and says "some updates were not installed" "error found: Code 80070663 Windows Update encountered an unknown error."
    I don't know where to go for more information about this, but after a few clicking, everything he tells me it is that the installation failed.
    Any help would be great.
    Thank you

    Hi Toby,

    Unfortunately, if you don't have the disks it is not much more we can do to fix this.

  • erroe code 646 for windows updates

    I am trying to install microsoft updates and the software and I get an erroe 646 code

    http://www.Microsoft.com/downloads/en/default.aspx

    Try a direct download.
    Put each Kbnumero in the search engine at the link above.

    If this does not work:

    Windows Update Forum:

    It comes with Vista, upgrade install and activate Forum.

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon.

    Mick Murphy - Microsoft partner

  • error code 641 when installing updates. also having problems with windows install

    have vista Home premium, installed sp2. Could not find a way to reinstall the windows installer. I can't find what code641 is

    Hello Spankyinc,

    Thanks for posting on the Community Forums of Microsoft Vista.

    I recommend to create a system manually, Restore Point so that in this case, a problem occurs when performing these steps, you can always perform a system restore.

    Try to create a new user profile and try to install Windows update and check if the update works fine.

    Create a new user

    1. click on start, type Control userpasswords in the start search box, and then click Control userpasswords in the list programs.

    2. click on manage another account.

    If you are prompted for an administrator password or for confirmation, type the password, or click on allow.

    3. click on create a new account.

    4. in the new account name box, type a name of single-byte characters, click Administrator, and then click on create an account.

    5. click on the user account that you created in step 4.

    6. click on create a password.

    7. in the new password box, type a password, retype the password in the area confirm the new password, type an indication of password in the Type a password hint box, and then click on create password.

    Once you have a new user accounts check if you can install updates.

    Access the link below for more information on how to solve the error message when you try to install Microsoft Update on a Windows Vista-based computer: "cannot install Microsoft Update on the computer.

    http://support.Microsoft.com/kb/933528

    If the steps above fail, access to the link below and run repair to reset the Windows Update components. It could help us solve the problem of Windows Update.
    http://support.Microsoft.com/default.aspx/KB/971058

    Later, download the latest version of Windows install 4.5 on your desktop and try to install it. Install the new version of Windows install could help us solve the problem of the installer that you are facing.

    Link to download Windows install 4.5:
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

    It will be useful.

    Thank you and best regards,

    Srinivas

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think

Maybe you are looking for

  • How to set my display font size in Thunderbird?

    I have Thunderbird 24.5 and can't change the font size using the tools-> Options-> display settings tab. I have restarted Thunderbird and restarted my computer Windows 8. The messages do not change.

  • How can I get rid of a split screen?

    When I use my favorites I get the web site on the left side of the screen and fire fox page on the right side of the screen

  • Tecra R850-520 - noisy fan - no cpu load - Win7 and Win8 64bits

    Hello. I got the Tecra R850-520 4 months. from the beginning, I have the same problem - noisy fan but no load cpu (about 2-4%) using win7 and win8 64bits I tried to change the windows profile to optimize or energy saving. but I still get the fan nois

  • Check the ink levels HP 4215 with windows 7?

    I bought a new desktop computer with Windows 7. Old unit was Windows XP. The installation disk supplied with the HP 4215 printer does not support Windows 7. But windows 7 OS has the inbedded of drivers so I'm able to use HP 4215. Drivers are limited

  • Single instruction is executed without selecting

    I have to choose each statement to run individually in SQL Developer.Y at - it a setting I can use to run statement individually in SQL Developer without selecting like TOAD every time.