Code 8 with a corrupted hard drive?

Similar Questions

• I can't start windows with my corrupted hard drive

  I bought a new hard drive to add extra space since my first hard disk is only 60 GB.  I bought a Samsung HD161HJ with 160 GB.  As well my original and new hard drive is SATA hard drives.  I hooked it up and everything worked well for about a week.  Then, I woke up to find a message saying that my Samsung HD player has been altered and I had to restart my computer.

  When I restarted the computer, the windows loading screen came on but then the black screen and nothing would happen.  I've decided to disable my SATA slot for the new disc corrupted in the system configuration, and then when I booted up everything was back to normal.  However, I want to have two drives connected and be able to boot windows to use special software for corrupted hard disks and try and solve the problem.  But every time I turn on the SATA slot for my new hard drive windows does not start.

  I know that the SATA drives need riders to determine the master and the slave.  So what is the cause of problems with me start windows with a secondary corrupt drive?  My main drive includes all the data necessary to start. Any suggestions would be greatly appreciated.

  Hello

  Please check with the Experts in the Forums of XP, it comes to the Vista Forums.

  Answers - XP Forums
  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  If you can try to borrow a disk since you only intend to test and should install with no internet connection
  access. And since its XP, you can use your own product Code.

  You had set them up properly when they were working. Something has happened since then, such
  like a drive failure.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Hard drive has been corrupted and replaced it with the new hard drive but couldn't get the windows genuine back 8

  Original title: recovery of original windows 8

  When I bought the new device, it was loaded with windows 8 but a few days before my hard drive has been corrupted and replaced it with the new hard drive but could not get the real Windows back 8.

  Please help me to get my windows genuine 8 back so I could get additional updates downloaded.

  Hello Vishal,

  Welcome to the Microsoft community. I appreciate your efforts to resolve the issue. I will certainly help you with the problem you are experiencing.

  If you purchased a computer with installed OEM Windows 8 on it, there could be a sticker on the Tower, or in the back (in the case of a laptop) with the product key to this topic. If there is no sticker, he can be preinstalled on your system BIOS.

  See the suggestions posted by Andre Da Costa replied on March 7, 2013.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/how-to-get-Windows-8-product-key-in-preloaded/ea0e53ae-3506-4ba2-a092-f266ece7072f?auth=1

  In addition to this, see:

  Product key lost or misplaced (certificate of authenticity) for Windows

  If the problem persists, you can contact the manufacturer of the hardware for the same thing and check.

  Hope this information was useful.

• Recovery disks do not work with the new hard drive?

  Hello, everyone.

  I have a laptop HP (pavilion dv7-1245dx) and the hard drive is dead. I had never gotten to burn my recovery disks, so I ordered new ones from HP. When I installed the new hard drive and popped in the disk to reinstall the operating system, it gave me the error message:

  "This PC is not supported by the system recovery discs. You can continue to recover this system with these discs. »

  Error code: 0100-30 FC-3602-3603

  The original hard drive was a Hitachi, 320 GB SATA

  The new hard drive is a WD 500 GB SATA

  Any assistance anyone can give would be great. :]

  Thank you for your time,

  C

  EDIT: Trying to recover a Vista operating system

  For anyone who has the same problem, I found a solution. I cloned the original hard drive using the Clonezilla fallback option. After using Clonezilla to image on the new hard disk, the partition which held that most of the data of the laptop is not mountable, however the partition containing the restore partition was a perfect copy. I turned on the computer, hit escape to access the menu (for a list of options such as boot order, etc, which included an option for recovery), and then choose recovery option. While the recovery discs, I received from HP refused to work with the new hard drive, the Vista restored cloned recovery partition without flaw.

• Install the operating system after replacing the corrupted hard drive Asus q500a

  The hard drive on my Asus Q500a is bad (he had checked the repairman). They told me that I could replace it (it will just keep failing until at last it dies just) but I have to re - install the operating system. The laptop comes with Windows 7 and I upgraded to 8 when it came out (I think). I don't have a recovery disk.

  How can I replace the corrupted hard drive and re-install the operating system?

  If I need to buy Windows 8, where can I find?

  Would it not easier that I left the repair shop handle it?

  Thank you in advance.

  Hi Kristi,

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  According to the description, I understand that the problem with you want to reinstall the operating system after replacing the hard drive corrupted on the system.

  Certainly, I understand your concern and will try my best to help you.

  I suggest you check the suggestions contained in the Microsoft link below and check if this is useful.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/replacing-hard-drive-and-re-installing-Windows-8/e8dbfc81-5294-4c94-9276-0f36e0a66e59

  In addition, you can see the suggestions in the link given below.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/reinstall-Windows-8-after-the-operating-sytem-has/30d47e63-296b-4466-ae9d-4628084541dc

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

  Jayant

• TE2100 poster error e/s with 40 GB HARD drive

  I have a TE2100 I solved the problem with him not wanting to turn on, but now I want to put a 40gig HARD drive in it, but it comes up with an i/o error, it takes an old 6gig I have here no problem.

  Have updated the BIOS so don't know where to go then someone has any ideas or go through it before?
  I hope someone can help, thank you in advance.

  Hello

  Supported by this oldie storage capacities are 10, 20, 30 and 40 GB. If you should have any problems with 40 GB HARD drive.

  Here is the list of hard drives supported:
  10 GB Toshiba MK1017GAP
  20 GB Toshiba MK2018GAP
  20 GB IBM IC25N020ATDA04-0
  MK3017GAP Toshiba 30 GB
  30 GB IBM IC25N030ATDA04-0
  30 GB HITACHI DK23CA-30
  MK4018GAP Toshiba 40 GB

  What are you using it?

• Satellite U840W - replacement SSD with current hybrid HARD drive

  I have this model U840W with a hybrid HARD drive (500 GB + 32 GB SSD cache), I would like to replace it with an mSATA SSD. My warranty is left about 2 months... I understand that if I open the bottom cover, the guarantee may be cancelled.

  Read the following thread:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=68779

  What I don't understand is the "live in the mid under foot rubber", what is the best way to remove it? This seems to be the real challenge. A directive (preferably with photos)?

  Thanks in adv!

  Hello

  I wouldn't recommend allows you to replace the hybrid HARD drive on your own even if hand warranty isn't valid anymore.
  Why?
  Because the after replacing a drive HARD or SSD, RAID and TSRI (quick start of Intel technology) mode will not be available.

  To rebuild the factory RAID mode and allow the TSRI, special tools are needed and this can be done by the authorized Toshiba maintainer.

  So even if you would be able to remove the bottom cover and hybrids of HARD drive, the new inserted SSD would not be able to achieve the best performance.

• Satellite 1800-712 does not start with the new HARD drive

  Hello world.

  I am currently trying to install a new HARD drive in my notebook of 1800-712.
  I'm having a few trubbles as my Satellite won't start with my new HARD drive.

  I upgraded my BIOS to the latest version.
  The new HARD drive is a 40 GB Samsung.

  Any suggestions on what I need to do to make it all works?

  THX, Philippe

  Hello

  This device was shipped with 20 GB HARD drive.
  You again is 40 GB.
  I guess that the BIOS does not recognize the HARD drive because of the size.

• The macbook pro is provided with an external hard drive?

  It comes with an external hard drive in the finder, or you buy one?

  It has an internal hard drive, but not an external one.

  (140751)

• Is it possible to install Boot Camp and use window only with an external hard drive, so it doesn't take much space on my Mac?

  Is it possible to install Boot Camp and use window only with an external hard drive, so it doesn't take much space on my Mac?

  No. Windows cannot be installed on an external drive, or start from a.

• Satellite A100 - 065 (PSAANA) - can I spend it with a SATA2 HARD drive?

  Hello Forum!

  I want to upgrade to a hard disk of 120 GB (Hitachi) to a 500 GB (Western Digital). I don't know if this A100 supports SATA2.

  I think it's to do with the hard disk controllers that are on the motherboard. This is information I don't think (using the pc Wizard). I am very happy to use a SATA drive, if it is the one which is compatible, but if it supports SATA 2, then obviously I would install a because they are 3GB of bandwidth instead of 1.5 GB as SATA.

  Any help would be greatly appreciated that my hard drive is full.

  Thanks in advance.

  Hello

  You can use a SATA2 HDD without problems. These discs hard are compatible downgrade to the old SATA1 standard, so you can use 500 GB HARD drive, as you suggested.
  But don t forget it will not work with SATA1 speeds, but this should not be a problem normally.

  So have fun with the new HARD drive! ;)

  Good bye

• Acer Aspire TimelineX 1830 68U118-t with a new hard drive. How can I get the bluetooth to work?

  I have an Acer Aspire TimelineX 1830 t-68U118.  The original hard drive died, so I replaced it with a new hard drive.  I loaded Windows 7 x 64 and loaded the chipset drivers and the network drivers.  The laptop is always my bluetooth equipment (even if I loaded the drivers Atheros).  Does anyone else have this problem?  How can I get the bluetooth to work?

  It would probably depend on the status of the warranty of the system.

  You must contact the service for options.

• "If the corrupted hard drive will be the OS can be installed again"

  "If the corrupted hard drive will be the OS can be installed again"

  If the hard drive has minimal corruption in localized areas, you can reinstall Windows.  You will need to reformat the hard drive, however.  When you get to step in the installation process where it formats the hard drive, do not choose "quick" format  On the contrary, let him do a full format.

  HTH,
  JW

• Synchronize folders with an external hard drive.

  Can anyone help? I want to be able to sync my library and office with an external hard drive (Freecom on USB) files.  The goal is to be able to maintain an up to the minute backup of all my files, so that the next time my hard drive failure I have to absolutely all backed up. I am aware that that is not only the problem of accidental deletion of files so periodically I will also manually save the backup to a different folder on the same hard drive, or is it also possible to get windows to schedule this backup type automatically)? Or y at - it another way to achieve this level of security of the files without a mirror raid arrays (or spend more money on hardware or software)?

  Try this:

  MS SyncToy

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=C26EFA36-98E0-4EE9-A7C5-98D0592D8C52&displaylang=en

  If you find my answer helpful, please click the button "Vote as helpful"! Thank you!
  My Blog

• I have Windows 7 with 500 GB hard drive, I have 280 GB free hard disk, but when you try Shrink partition I could get space Shrink as 36 GB only.

  I have Windows 7 with 500 GB hard drive, I have 280 GB free hard disk, but when you try Shrink partition I could get space Shrink as 36 GB only. I've defragged and tried as well... Any suggestion to get more space for the partition.

  I've hit in this partition for a long time.

  I have Windows 7 with 500 GB hard drive, I have 280 GB free hard disk, but when you try Shrink partition I could get space Shrink as 36 GB only. I've defragged and tried as well... Any suggestion to get more space for the partition.

  I've hit in this partition for a long time.

  This is due to files not movable, scattered in open spaces.  Windows Disk Manager has a few limitations... You can use a thrid party as EaseUS Partition Master Free Edition 9.2.2 freeware utility

  Its very easy to use and you can be dragged and resized your drive...