Code 80070005. After carefully installing Windows 7, Windows update tells me that I must install a critical update that keeps failing
After carefully installing Windows 7, Windows update tells me that I must install a critical update for the graphics card to Nvidia 9600 m GS on my Touchsmart, but every time I start the process, the download fails with the error code 80070005. I tried several times a day for a week now. Media Center won't play any TV, saying that the correct graphics drivers are not installed. I tried to install the drivers from the Nvidia site, but nothing helped.
Hi Jos Kelly,
Try this link, it might be useful:
http://www.nvidia.com/object/win7_winvista_32bit_191.07_whql.html
Good luck, let us know if it works.
Stephen Davies MS
Tags: Windows
Similar Questions
-
I get the error code 80070005 when you download Windows updates
Original title : I use Windows 7, Vista Home Premium on a laptop. I can't download updates and get the error code 80070005
When you try to update, I get the error code 80070005. System: 64-bit, service pack 2, M-6880 of Gateway computer memory 4.00 GB
Hello
1. what day you're talking about?
2. don't you make changes to the computer before the show?
Please follow the steps below.
Method 1:
Step 1: Put the computer to boot.
Click on the link below
http://support.Microsoft.com/kb/929135
NOTE: after you install the update properly, restore the computer to start as usual (see step 7 link mentioned above)
Step 2: Download and install updates from Microsoft Download Center manually.
a. visit the Microsoft Download Web site, type the number of "KB" in the search box and press ENTER.
b. in the list of search results, click on the (KB) Knowledge Base article link to go to the download page. If there is more than one list, look for a link that goes to the Microsoft Download Center.
c. If there are several versions on the download page, find the appropriate for your computer. Click on the download button and save the update to your desktop.
d. When you are prompted, click open to install the update.
Microsoft Download Center
http://www.Microsoft.com/download/en/default.aspx
Method 2:
Run the Microsoft Fixit from the link below.
http://support.Microsoft.com/mats/windows_update/
Method 3:
Reset components from Windows Update from the link below.
Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://support.Microsoft.com/kb/322756
How to back up and restore the registry in Windows
http://support.Microsoft.com/kb/971058
Method 4:
Follow the steps from the link below.
-
Windows Vista update errors
I had to reformat my computer. I bought it in 2008 with Vista. Now he says that I need 117 updates of which 101 will not download. Updates do I need?Troubleshooting Windows Update tool is to
http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter
-
57 a error code during the installation of Windows Update KB2598290
Windows downloding this update, but allow to install this update
57 a error code during the installation of Windows Update KB2598290
Options-
1. let your office product installation media in the drive and try to install the update.
2. try manually download and install the update: http://www.microsoft.com/en-us/download/details.aspx?id=29770
3. repair Office and try to install the update.
http://support.Microsoft.com/kb/924614 -
After the last Windows Update (04/27/11), my home group no longer works
Original title: homegroup after Windows Update failure
After the last Windows Update (04/27/11), my homegroup is no longer in effect. That's happened?
I have Windows 7 Professional Version 6.1 Build7601: Service Pack 1 on both machines.
The resolution of the problems of the residential group has done several things, but that did not help.
What works removed one of the machines on the network for several hours and then reconnect to the network. Don't know why?
-
Windows xp tells me that my modem is not installed properly.and is the title of the dialog box. Slcpappl? I have xp pro sp3 8.
original title: anbody know what ' slcpappl ' alluded?
Hello
1 how long have you been faced with this problem?
2 have you made changes on the computer before this problem?
3. What is the exact message in the dialog box?Your question does contain all the required information necessary for us to help you. Please re - write your question, this time make sure you have all the information necessary and we will try to help.
Suggestions for a question on the help forums
http://support.Microsoft.com/kb/555375 -
Error code 646 appeared during a windows update session
Original title: error code 646
error code 646 appeared during a windows update session. Any ideas what this is and how to fix it?
WorcesterwoodyTry this Fixit http://support.microsoft.com/kb/2258121
-
Windows store tells me that Revel is installed on my PC for Windows 8.1. Even if it does not work on my iPad, there is no sign of it on the PC. I can't connect to the PC.
I can not uninstall revel and reinstall it because I can not find it and because Windows store says it is already installed.
Hoping someone can help.
Hi JRSJS,
Windows 8.1 makes it easy to find installed apps! Here is a link that can help you:
Tip Windows 8.1: Find your installed applications. Windows 8 content SuperSite for Windows
You can find this link also somewhat useful:
http://www.fixedbyvonnie.com/2013/12/where-are-apps-in-the-Windows-store-installed/
I hope this helps!
Glenyse
-
Windows always tells me that I don't have no 'scan in some time"when, in fact, I did.
How can I stop it?
Hello
I remember there are some parameters in CCleaner, you can check under application settings and do not check MS AntiMalware?
then check if your problem has been resolved, with this it's because that that your CCleaner scan of your hard drive and delete the history of the ESM log
Thank you.
-
Vista - Error Code: 80070005 (could not install Windows Defender definitions)
· I got s error code 80070005 when:
Windows Update does is set to automatic update search and downloaded an update of the normal Windows Defender definitions.
Downloaded, it would not move. I regularly got these definitions of Defender updates and installed without problem, since a few years - until Monday July 5, for some reason any. I'm not aware of any change that I made for all programs, because I downloaded and installed my update of definitions last defender about a week earlier.
I use a single Windows Vista Ultimate Desktop without networking or wireless involved.
I saw in a previous question and replyManasa P to Support of Microsoft, June 25 wrote:
This problem may occur if access is denied when accessing or copying files during the process of Windows Update or Microsoft Update. Access may be denied if you have logged on to the computer as a standard user and this account does not have permission to install updates.
Method 1: Log in to the computer as an administrator
1. Firstly please confirm that you have logged on to an account with administrative privileges.
2. now run Windows Update.Method 2:
If you still experience the problem, reset the Windows Update components and check if you still get this error message.
Click the Fix It button in the article below to do it automatically or you can do it manually. For more information, refer to the article below.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058This is an update of the HP Monitor driver. Is "reset" Windows Update components all I have to do as well for my situation, with a problem installing Defender update the file definitions? " Just using the "Fix it" button, or is there something different about my situation?
Thank you, Jim North
Hi Robear,
Good news: this weekend the "alert" to install the file older definitions that couldn't went away on its own. Then, this afternoon, the definitions of the latest update file 1.85.1905.0 downloaded and installed without problem. Wonder what has caused the problem of moose?
Thanks again, Jim North
-
Windows 7 - error code: 80070005 & dt000 (cannot install updates)
Can someone help me please? I can't install the update of security for windows 7 for x 64-based systems (KB234729) "WindowsUpdate_80070005" "WindowsUpdate_dt000"
Hello
You can follow this link & check if it helps.
Hope the helps of information. Please post back and we do know.
Concerning
Joel S
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I know that this problem was posted a lot everywhere on the internet (even here), but I would like to explain a little better than everyone else and maybe I can somehow get to the bottom of this.
The problem:
I am trying to update my acer 4/5 years, grandfathers aspire running Windows Vista. Whenever I try to install the following updates:
I get 6 updates installation failed with error code 800736B 2. When I turn the computer off, he pretended to go through the process of 'completion' facilities update 6 (you know what I mean, it says after that windows has disconnected the user is installing updates). It takes about 15 minutes, then when I re - turn on the computer and check the updates again the exact same updates are always listed.
The attempts of a solution:
I downloaded and used the update tool for Windows Vista (http://support.microsoft.com/kb/947821) system. It shows the exact symptoms of the same as the rest of the updates. It "installs" (which lasts about an hour. Said it was successful. Then I restart the computer, it 'full' Update 1 on 1 which have been installed, when I opened the tool (after reboot), it says that I have to reinstall the same update (KB947821). So obviously it cannot be installed but for some reason any thought that he didn't.
I also tried to run this tool in safe mode and had an error that says that I can't run it in safe mode. Sweet.
I wanted to download the updates manually (I was hoping that they would be in the form of some .exe or something) then run their safe mode, since you can't use windows update in safe mode. I looked around online a lot, but could not find a way to download the updates manually. I found a bunch of guides tell me how to do, but non of them work. My guess is that they removed the support for it.
If anyone has any ideas as to what I can do without having to reinstall windows it would be awesome. My grandfather is really exhausted all of this current vista installation so wipe everying is probably a bad idea. I would like to avoid it at all costs.
Hello
You can try the steps in this KB http://support.microsoft.com/kb/883825 for a similar error, but others indicated that they were able to solve this problem by using the KB.
See also: the problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
-
Details? Errors of multiple problems with no codes, freezes. Fixes in the knowledge base that do not work. I can't find the answers. It crashes, it's slow, it freezes.
Hi phnxpete,
Thank you for using the Microsoft answers forum!
You can also try to Hide Windows update by following the steps below.
1. Click Start, and type windows update in the search bar
2. When you are in widows update, you will get a list of updates installed on your computer
3. click on updated forecasts available.
4. Select the update you want to hide.
5 right click on update and then click Hide update.
6. you invite to continue or cancel.
7. click on continue, and then restart the computer.Shalini Surana
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
In particular windows security updates for example updating security for windows vista (KB2378111) error code: 800719E4. With a lot more updates, they continue to fail, but only a couple succeed. When starting my computer in general goes to screen installation of updates. He finished going through step 1 and 2, but never seems to complete step 3 and remains on full where for at least 5 minutes. Then shows that updates were not properly before. Restoration of the changes. This continues to happen frequently now, and after having tried to restart my computer or install a little at a time still does not solve the problem. Also, I tried to use the troubleshooting solutions but did not have much. Don't know what else to do?
My laptop runs Windows Vista Home premium: service pack 1: 32-bit operating system type.
0X800719E4 ERROR_LOG_FULL
The log space is exhausted.Transaction for Windows Update logs may be in an inconsistent state.
You can delete them by clicking the ORB start.
In the search for cmd field type
Right click on cmd.exe and select 'run as administrator '. Accept the UAC prompt.At the prompt, type in the below exactly as written, including spaces, pushing enter after each command
CD /d %SystemRoot%\System32\SMI\Store\Machine
attrib s h *.
del *.blf
del * .regtrans-ms
outputRestart the computer now and see if it can be updated.
MowGreen
Expert in Windows IT Pro - consumer safety* - 343-* FDNY
NEVER FORGOTTEN -
Vista - error code 80070005 (unable to install KB2567680)
recently, I try to install updates for windows vista and they all fail to be installed
Error code 80070005 (KB 2567680).
Error code 80070005 (2536276 KB)
Error code 80070005 (KB2562937)
Error code 80070005 (KB2559049)
Error code 80070005 (905866 KB)
Error code 80070005 (KB2563227)
Error code 80070005 (2539633 KB)
Error code 80070005 (KB2556532)
Error code 80070005 (Kb2563894)
Error code 643 (KB2539636)
Error code643 (2533523 KB)
Error code 643 (2468871 KB)
Could you please tell me how to solve this
Error code 643 (KB2539636)
Error code643 (2533523 KB)
Error code 643 (2468871 KB)
Try to repair the frame and then installing updates.
To repair the .NET Framework 4 Client Profile or .NET Framework 4 extended etc. -.
- Click on start/Orb and click on Control Panel.
- Go to the program and features.
- Locate the Microsoft.Net Framework 4 Client Profile or .NET Framework 4 extended, right-click.
- You should have the choice to repair or uninstall/change, click it.
- This will then give you the opportunity to fix it
- Select the repair option.
If this does not help, some people have reported that manually download and install updates succeeded in fact.
Updates:
1. http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=27017 (KB2539636)
2. http://www.microsoft.com/download/en/details.aspx?id=3556 (KB2468871)
3. http://www.microsoft.com/download/en/details.aspx?id=27014 (KB2533523)Make sure you download the one appropriate for your system.
http://support.Microsoft.com/kb/827218 (ie X 86 32-bit =)
Install as administrator.
Maybe you are looking for
-
We had a few phishing fairly sophisticated at work; suspect this is why I hesitated. You can reassure me that this is the true Firefox so I can donate?
-
My MacBookPro early 2011 screen 13inch goes black
I am having trouble with my early 2011 MacBook Pro. It does a few things. When I open files or Chrome applications, the window becomes black for a bit before loading of the real thing, that I open. In addition, sometimes the whole screen just disa
-
HP Pavilion dv6 with Windows 7 - HP BIOS update
Good afternoon When I run the HP Support Assistant, under the button "updated and of the developed"; the tab "actions". He tells me to update my BIOS. I select and menu drop down it states the following: SoftPaq = SP61028Version = F.29 I select the
-
External Flash for t4i options
I recently bought the Canon t4i and am more than a little impressed by the unit. Years, I bought an external flash Canon Speedlite 299 T to use with my camera Canon AE1 Program. Ask yourself whether or not this old work, but still, flash works with
-
OfficePro 8600 all-in-one - function "Scan to Computer", alias software update do not update
Hello On my iMac, after update to the Mavericks, the "Software Update" feature Apple told me that there was an update from HP for my printer. After the update, I got a new feature and a updated printer utility (or the scan utility? I type of memory o