code 80070017 error when you try to downland microsoft office service pack 2 on vista

Similar Questions

• Error when you try to install Windows XP Service Pack 3: "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this.

  Windows XP SP3 problem

  Recently, I met a problem with my PC and was forced to use the system recovery. Now I'm back to factory settings and try to install Windows XP Service Pack 3 on my computer. Windows Update won't work for me, that whenever I try to update I get [error number: 0x8024400A]. I think it's because I use Service Pack 2, or that's what I concluded after researching the problem, anyway.

  This is not my real concern, however. Because I could not get the update automatically, I tried to download and install the "Windows XP Service Pack 3 Network Installation Package for IT professionals and developers" myself. The first time I did it, I restarted the PC after the installation and was met with "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. "  I went into safe mode and went to a just system restore point before SP3 was installed, but now I don't know how to install it correctly without encountering this problem after reboot. I'm hardly the easy just stick with SP2 when there are potentially important available updates. How can I get Windows Service Pack 3 is installed on my PC?

  It's certainly interesting!

  If the cause of your problem is to have a HP PC with an AMD processor and an original image on your hard drive (and of course it sounds like this is the case), the solution should be to rename the file intelppm.sys and launch the sp37394.exe patch. Once done, the SP3 file that you downloaded from here:
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24
  SHOULD work!
  I'm puzzled why there is no intelppm.sys file in your directory C:\WINDOWS\system32\drivers.
  Since you recently returned to square one with your PC ("return to factory settings"), then you may as well run the patch from this page:
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&DLC=en&softwareitem=PV-60484-2
  and try the SP3 Setup file again.
  But, first, let's be absolutely sure that we are both using the same terminology. Please answer the following questions:
  1. have you safely backed up ALL your data?
  2. what method did you use to ride "back to factory settings? I think that your choices have been a destructive restore (full) and a (partial) non-destructive recovery. The first erases the disk and leave you with a pristine image and NOTHING ELSE (which means that all of your programs and data get deleted). The other (which does not always correctly) is supposed to leave programs and data intact.

• details of error: code 80071a 91 when you try to install the 'a security update for windows vista (kb2855844).

  details of error: code 80071a 91 when you try to install the 'a security update for windows vista (kb2855844).

  does anyone know how to go beyond this error?

  Thank you.

  Moved from Vista to install, upgrade and activate Forum.

  Take a look at this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/unable-to-install-updates-getting-error-code/27a21977-F964-4376-BFAB-2f29ea127c6a

• Error Code D59. -When you try to install Microsoft SQL Server 2005 KB2463332

  I get D59 error Code when you try to install Microsoft SQL Server 2005 KB2463332. Any suggestions?

  Hello

  Try to download and install manually and check:

  http://www.Microsoft.com/downloads/en/details.aspx?familyid=D09C1D60-A13C-4479-9B91-9E8B9D835CDC&displaylang=en

  For more information, see this:

  http://support.Microsoft.com/kb/822798

  It will be useful.

• Code 43 error when you try to reinstall the cloud creative cc

  None of this fixed my situation... Finally I tried something no one suggested.

  I mentioned the user Root (God mode) on my iMac

  uninstalled and reinstalled the soft cloud

  I then had full access to my loading apps.

  I also deleted all caches using cocktail for mac.

  And Voila!

  Branched out in a new discussion.

  Hi ArtisticBrit,

  Please try the steps on this link to solve "Error Code 43": code 43 error when you install Adobe Creative Cloud.

  Let us know if you need help with this.

  Thank you.

• Error 1935 when you try to install Microsoft Office 2007

  original title: Setup error

  I recently had a hard drive crash and succeeded him. I am running Vista Home Premium. I'm now trying to reinstall my Microsoft Office Home and Student 2007.  I was getting Error 1935. In efforts to try to correct this, I used the .net Framework cleanup tool and then downloaded .net 3.5 SP1.  When you try to install it, I get an error of installation.  I also downloaded and installed 4 and "fixed".net .net 4 and always had the 1935 error happen.  Any suggestions?

  Hello

  read this information

  Error message when you try to install an Office program: "Error 1935. An error occurred during the installation of assembly component"

  http://support.Microsoft.com/kb/926804

  and if the above does not fix it:

  This is the performance of vista forum

  Please repost in the Sub forum office

  http://answers.Microsoft.com/en-us/Office/Forum/office_install

• code Ox643 error when you try to install the update of security for flash player (KB923789)

  I get the error code Ox643 when you try to install the update for flash player (KB923789) security - after Mr fixit running and the application of other measures recommended, I still have the error code and get the installation error code. What should I do now?

  Is Adobe Flash Player v11.3.300.257 (or higher) installed? Test here using Internet Explorer (only!)-online http://www.adobe.com/products/flash/about/

• Code 0x64C error when you try to install KB2416477

  "Security Update for Michrosoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x 86 (KB2416447)" repeatedly fails. Under XP Pro. What I would do.

  Hi PJB1135,

  1. Did you the latest changes on the computer?
  2. You are able to install some other updates on the computer?
  3. You have security software installed on the computer?

  Method 1

  I suggest that you manually download and install the update, check if it installs successfully.

  Security Update for Microsoft .NET Framework 1.1 Service Pack 1 on Windows XP, Windows Server 2003 (64-bit), Windows Vista and Windows Server 2008

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=17440

  Method 2

  See the Microsoft article below and try the steps mentioned, check if it helps.

  You receive the error 0 x 643, error code 0 x 80070643 or updates may be offered again when you try to install the .NET Framework updates when you use Windows Update or Microsoft Updates

  http://support.Microsoft.com/kb/976982

• Get the 7 output code fatal error when you try to resolve plugin problem

  Exit 7 code fatal error 0, 81 errors, 48 warnings when you try to solve problem of plugin when you restore the default set of PS CS5 > relocation of the installation with SN disc accepted.

  Errors ' Exit Code: 6, "" Exit Code: 7 ".

  Mylenium

• Code 646 error when you try to run windows update

  I have IE8 vista SP1. I could not successfully download updates for the month. Tried resetting it automatic download and install manual. Then, I selected just 1 update for MS Office. There was the same code 646 error when trying to install just 1 updates necessary.

  Read the problems known in this page, they explain what to do. There is a link to a fix the article.

  http://support.Microsoft.com/kb/2258121>

  Let us know if this helped.

• Windows XP Media Center - Code 3 error when you try to watch the tv/record tv ratings, etc.

  I have a windows xp media center and all of a sudden when I try to use the media center, I get an error 'code 3' I tried to do a few different dates on the system restore but it did not fix the problem. I also tried to find out which driver to restore or reinstall but I don't really know what driver to do. I know that is not under the modem or a printer, but after that, I'm lost. Any help that anyone can give me would be greatly appericiated. Thanks in advance. Trevor C.

  Hello

  1. What is the exact error message?
  2 have you made changes on the computer before this problem?

  The following article might be useful:
  You receive an error message "Failed to save component", an error message "Critical process failure" or a "Tuner not found" error message after you install the Update Rollup 2 for Microsoft Windows XP Media Center Edition 2005
  http://support.Microsoft.com/kb/910905

• Code 10 error when you try to burn cd/dvd

  error __code 10

  running windows 7 Home premium... gettig code 10 when trying to burn cd/dvd...can't can't find the part upper or lower filters... do I do...

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Code 8007065E error when you try to install KB2385678

  Original title: Security Update for Windows 7 for x 64-based systems (KB2385678) _

  Windows HAS KB 2385678 update CODE 8007065E error

  Hi peterdawes,

  Follow the steps below:

  Method 1: Open the Windows Update troubleshooting tool

  To resolve the problem, run the Windows Update troubleshooting tool . He makes sure your computer is connected to the Internet and checks to see if your network card and Windows Update services are running properly.

   

  Method 2: Installation offline

  Download and save the Setup on your desktop package and try to install the same.

  Download the update from the link below:

  Update security for Windows 7 for x 64-based systems (KB2385678)

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Receiver 0x8007043C error code when you try to install Windows XP service pack 3.

  What should I do if I have has been updated to windows xp and I received this error? [Error number: 0x8007043C]

  I think I have some kind of a worm of Svchost. I tried Malwarebytes which came with nothing

  After a sakhi system. I have Norton anti virus. I did a system restore. I am running Windows in safe mode, try to update

  service pack 3 and service pack 2 installed.  Windows will not be updated in normal mode, as I tried in safe mode. I tried to manually update to service pack 3 internet explore and get this error. Windows will not be stopped, programs do not start, and when I open the Task Manager sometimes I see a Svchost process take a lot of memory and slow everything down.  I have internet explorer 8.

  Any help would be great. Thank you.

  Hello

  Start the computer in normal mode and follow the steps from the link: steps to take before you install Windows XP Service Pack 3: http://support.microsoft.com/kb/950717

  Also, you can follow the procedure from the link: how to troubleshoot an installation fails in Windows XP Service Pack 3: http://support.microsoft.com/kb/950718

• I get the error code 0 x 80246002 when you try to install Windows XP Service Pack 2 on my machine.

  I recently did a complete reformat of the hard drive due to other errors.  I also have errors like the file is corrupted after trying to install other files of other non-microsoft Web sites.  Any ideas?

  Vista SP2 is available through Windows Update?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Any of these applications running in the background when you attmpeted to install SP2?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version that came preinstalled when you buy it and that would have been reinstalled, but invalid, when you reinstalled Windows)?

  The foregoing despite...

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft