Code blocks doesn't work do not help me:)

Hello, so I downloaded the blocks of code with the xcode and the command line, I disabled the code completion and keyboard shortcuts (btw, I have blocks of code 12.11) and when I try the default project in the terminal appears this thing:what is happening?

It is not so much a question of Code::Blocks because it is a command line.  When you use the command line, spaces are used to delimit the parameters and options, but cite your file path or escape spaces in the name.

Tags: iOS Developer

Similar Questions

  • Disk Cleanup doesn't work does not HELP!

    I tried to run the cleaning disc for hours now, but it does not work.

    I tried to launch it from the search for "Disk Cleanup" and cmd in file Explorer, but none of them work.
    When I click on it if it goes to the popup with different readers after I click OK nothing happens.  It does not show compress older files or anything like that.
    Any help is very appreciated, I am really pulling my hair out because I need to remove a windows.old file because my SSD becomes full.

    Hello

    Please answer a few questions to refine the question.

    1. have you already try to launch the program from "Administrative Tools" in the control panel?

    2. you have any third party such as registry cleaning software, CCleaner etc. ?

    3. have you recently upgraded to Windows 8?

    I suggest you to start cleaning disc by right-clicking and selecting 'Run as administrator' to see if it helps.

    If the problem persists, you can start the computer in safe mode and check if it works or not.

    Reference:

    How to easily enter the mode without failure in windows 8? (One-click series)

    http://support.Microsoft.com/kb/2809468/en-us

    Hope this information helps. Response with status so that we can help you.

  • with firefox 43 yahoo and yahoo mail doesn't work does not correctly

    With the help of win 7 and firefox 43.0.1, I have 4 computers and now all have problems with yahoo and yahoo mail doesn't work does not correctly. Loading sites, but most of the features are missing and clicking on what whether changes to the lists of text. I have disabled flash / anti-spam etc., cleared cookies and cache and even firefox loaded down once again and have upgraded, no help. I'm forced to use IE now.

    I tried Yahoo support, they said try Firefox... In any case, it's Firefox and I found a solution using the 'Refresh Firefox' button. Whatever the problem was fixed on two of my computers so far. Got to update my setting again but it's 10 m, compared to the 10 hours I spent trying all that is nothing.

    Thanks for the help!

  • sort order doesn't work is not in the library module

    Hi, I shoot events with 2 different cameras, using a pool to the other and back dozens of times switching.  When I come home, I import the maps of two cameras in Lightroom. In the library module, the small previews on the bottom sort by chronological order of capture OF the CAMERA.  meaning that it shows all the photos sorted by capture of the camera one time and then all the photos, sorted by the time form camera capture 2.  I have many, many would prefer if the form of photos, both sorted cameras sort by ABSOLUTE capture time, not a single camera, then another.  In the library module, select view/sort/capture time but it just doesn't work.  any help?

    Thank you

    Triple - make sure that the camera clocks have been set at the same period.

    The best way to do that is to display the date of capture under the thumbnails mode grid library. In the library, view > Display Options and set the low label or the top of the Compact cell Extras to capture Date/time. Then set View > grid view Style > Compact cells.

    Then view > sort > time capture. Look closely at the date/time under thumbnails and pay attention to the AM/PM (if you are in a country with 12-hour formats).  The date/time by strictly ascending order?

    If they are not strictly ascending, thanks for posting a screenshot of high resolution of your entire window of LR showing the problem.

  • LR 5 doesn't work is not on the new Macbook Pro.

    LR 5 doesn't work is not on the new Macbook Pro.  Have tried 2 CC downloads, download licensed 5.6 and 5.5 download licensed, all the results in the same thing.  It comes up with the screen base but no signs and gives that an error occurred when changing the modules.  Nothing I have tried seems to help.  He also said "start with lightroom mobile at the top on the left, although it said it's Lr 5.6.  Anyone else having problems?  Calls to adobe are no help and have to wait until Monday for technical support.  Surely this must run on a NEW laptop with any other installed software!

    Setup logs was very good.  Application installed but is not working properly.  Finally got Adobe support and it turns out be a file permissions error.  Had to add applications and myself as accessors of the Lightroom folder under ~/Library/Adobe/ path and set permissions to read & write (was read only for everything except system) and apply to all the cases closed.   Works fine now.  Including this here in case when someone else is going through this issue.

  • spell check doesn't work is not in outlook on windows 7

    Hi the spell checker doesn't work is not in my outlook for windows 7. This can be corrected?

    Sincerely, Robert H.C.

    Outlook.com has a manual spell at the top next to the options button controlIt won't appear that if you write an e-mail AND if your browser is not checking spelling himself. In most modern browsers the spell checking is done by the browser itself and may need to be enabled in this browser

    IE , it depends on the version you have.
  • Whenever I click on any button of the trial download on the adobe Web site you I get redirected to a page where the 4 squares are moving to load the page, but never load it, I left my browser on for hours and yet it still doesn't work anyone can help?

    Whenever I click on any button of the trial download on the adobe Web site you I get redirected to a page where the 4 squares are moving to load the page, but never load it, I left my browser on for hours and yet it still doesn't work anyone can help?

    clear your adobe.com cookies or use a different browser.

  • DNG Converter doesn't work is not on a camera called raw photo

    DNG Converter doesn't work is not on a raw photo camera that always comes back with this Message "check if the camera is recognized.   "

    Supported cameras Camera Raw plugin | Compatible cameras

  • WiFi doesn't work do not

    A year and half ago we bought a new Mac and the Time Capsule (TC) to go with it. I tried to set up at the start and think about this topic, I do not think that it has never worked properly. I say this because we got a new modem without router because time Capsule has an inside, and we are unable to connect to wifi. I have a TB Ethernet connection and if I can get online in this way, but the WiFi does not work. Last night, I went through and set up and the WiFi worked, but today it no longer works and I can't seem to do it again.

    The indication of WiFi signal says I'm connected, on my Mac and on our phones, but when you disconnect from data it no longer works. It's very frustrating because I don't want to have to go back to a modem/router of the rental of our cable company.

    We have just upgraded to OS X El Capitan 10.11.6

    When it worked last night I created everything from scratch. But I do not think that I would have to do every time I need to use the internet. I also tried to create a WiFi with a custom DNS but that doesn't work anymore.

    Any help would be appreciated.

    Thank you.

    Amazing!

    I am so embarrassed but understand that I would update in the case where everyone does the same thing.

    When I put in 1.5 years ago I went from ethernet cables. The Ethernet cable from the modem was connected to the LAN port and the Ethernet cable from the Mac was connected to the WAN. Once I put the cable from the modem to the WAN everything has worked.

    Sometimes, just come back to square one.

  • Touchscreen doesn't work is not for the Satellite U920t - 10 p

    Please read this completely before you answer with your copied and pasted answers.

    My touch screen lets you stop work, but was still attached with a reboot of the machine.
    Now it doesn't work at all and * I've tried everything posted elsewhere in this forum *.

    I tried to change the settings for battery power, try to update the drivers (not exactly who is right though!).

    Please can anyone help because it is a new machine and it's very frustrating.

    Serial number: 7D054633H
    Model: Toshiba Satellite U920t - PSUL1E-01900JEN 10 p

    Thanks in advance.

    > Please read this completely before you answer with your copied and pasted answers.
    IMHO, I n t think that someone here in the forum doesn t read the messages before playback
    I hope that this part of your post is just the result of frustration due to the malfunction of the notebook...

    Back to your question:
    > I tried everything already posted elsewhere in this forum.
    and what does this mean? What have you tried exactly?
    Have you given zero and plant control panel?

    If not try and in the case where this help not the laptop's hardware could be affected which requires new checks of material by an authorized

  • HP 14-r206nv: light wireless led doesn't work do not

    I have a very minor issue that don't mind operating of the laptop, but I'm curious to know why it does not work, because I know that before reinstalling windows it worked normally.

    Well well, to the point now. After a hard drive failure and replacement, Windows 8.1 are installed again and each driver has been installed and works well. The only thing that doesn't work is the led light button wireless (F12). The button is working correctly, activation and deactivation of the Wi - fi, but not the led. It lights, neither white nor red, it is always disabled.

    The model of the wireless card is Realtek RTL8723BE.

    I installed the drivers from the HP site.

    Version of the driver for the wireless card is 2013.8.915.2014

    The version of the wireless button driver is 1.1.7.1

    I tried the latest drivers for the card (an optional windows updates finds) implemented to date for this and the wireless button (if I try update driver in Device Manager, it installs a new) but nothing has changed for good so I decided to go back to what the official site suggests and post here.

    Hi @v1184,

    Thank you for your inquiry.

    I understand that you had a hard drive failure and he had to be replaced, you did. You reinstalled Windows 8.1 and all drivers are up to date.  The only problem you are having is that the wireless button light does not illuminate, but it does not work.

    You tried to update the wireless driver button, but has not changed, so you returned back to the recommended HP driver.  As the wireless button does not work it is not the driver, however, it could be that the light burned. The other possibility would be that when you replaced the hard drive, the connection has been dislodged or disconnected and must be reconnected.

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on ' Thumbs Up ' below is a great way to say thank you!

  • User accounts - > user accounts to manage a link doesn't work is not in Windows 7 64 bit

    Hello

    I tried to open the Panel-> user accounts-> accounts less manage accounts does not create a new account link. My OS is Windows 7 64 bit. 32-bit Internet Explore doesn't work. I tried to register the dll files to 32-bit internet explorer, but it does not work. Please help me.

    Hi Madhavaarimilli,

    -You receive an error message when you try to create a new user account or access to Internet Explorer 32-bit?

    First of all, I suggest to start the computer in safe mode and check if you can create a new account on your computer. To boot to the desktop in safe mode keep tapping key F8 during restart. Once you see the option to start in safe mode, select it and press ENTER.

    Access the link to learn more about how to start the computer in safe mode: http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

    To create a new user account follow the steps below:

    1. open user accounts by clicking the Start button, click Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.

    2. click on Manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    3. click on create a new account.

    4 type the name that you want to assign to the user account, click an account type, and then click create an account.

    If the problem persists in safe mode, I would say allowing you to run the auditor of file system (CFS) analyze and check if if helps solve you the problem.

    To run the Scan SFC follow these steps:

    1. Click Start and type cmd in the box start the search.

    2. right click on cmd in the list programs and then click Run as administrator.

    If you are prompted for an administrator password or a confirmation, type your password or click on continue

    3. at the command calls, the following line and press ENTER: sfc/scannow

    Access the link below to learn more about the execution of the System File Checker:

    http://support.Microsoft.com/kb/936212

    For question connects to open Internet Explorer, I would say to run the Internet Explorer troubleshooting utility built into Windows 7 and check to see if it helps you solve the problem.

    To run the Internet Explorer troubleshooter, follow these steps:

    1. close all programs.

    2. click on start and then click Control Panel.

    3. under system and security, click on find and fix problems.

    4. in the left pane, click View all.

    5. click on Internet Explorer Performance. This opens a new window.

    6. click Next.

    7. the resolution of the issues will take place and try to solve the issues raised everything automatically. Click Close.

    After the store has run successfully, check to see if you receive the same error.

    Also access the link below and follow the steps to solve the problem with Internet Explorer.

    http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-problems-with-Internet-Explorer

    Hope this helps and return to view the results.

    Thank you and best regards,

     

    Srinivas R

    Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think

  • Copy / paste doesn't work is not in Microsoft Office word.

    Original title: Windows 7 won't let me copy or cut and paste, all of a sudden he stopped doing work with control etc. does not help it doesn't let me do in the notebook, but just not in word

    all of a sudden, it stopped to work with control etc. does not help it doesn't let me do in the notebook, but just not in word and I need help too plese

    Linda

    There's a Fixit here:
    http://support.Microsoft.com/kb/921541/en-us/

  • Microphone doesn't work is not in Windows 7

    my sounds work but microphone doesn't work on my win 7, I have a driver realtek hd audio, please give me solution, please...

    Hello

    What application you use to record microphone?

    Method 1: Run the troubleshooter and check if the problem is solved or not.

    Open the troubleshooting of Audio recording

    Method 2 : perform the steps in the article and see if the problem is resolved or not.

    Adjust the microphone volume

    Method 3 : record the sound of the sound recorder and see if it works or not.

    Record audio with Sound Recorder

    Hope that helps.

  • JavaScript doesn't work is not on the page navigation

    Hello

    I have a manual tabular presentation on the emp table. There is a javascript function that calls for the deptno column change. If deptno is RESEARCH (20), then it turns off the field for this employee hiring date.


    The same function is called on page load using the threshold:

    $("[name=f04]').change ();


    It works fine when the page is loaded for the first time. When I navigate to see the next set of rows (for example, 16 to 30) then the javascript code does not work.


    An example can be seen on apex.oralce.com:

    https://Apex.Oracle.com/pls/Apex/f?p=30264:28


    Workspace: apex2014

    Username: forum

    Password: abc123

    Application: 30264 Dev2

    Page: 28

    Can someone explain why it behaves like this?

    Thank you

    ZKay wrote:

    I have a manual tabular presentation on the emp table. There is a javascript function that calls for the deptno column change. If deptno is RESEARCH (20), then it turns off the field for this employee hiring date.


    The same function is called on page load using the threshold:

    $("[name=f04]').change ();


    It works fine when the page is loaded for the first time. When I navigate to see the next set of rows (for example, 16 to 30) then the javascript code does not work.

    Can someone explain why it behaves like this?

    This occurs because the function is called only once the page loads, and therefore affects only the lines that existed when the page is initially rendered. Page navigation performs a partial page of AJAX (PPR) refresh that completely replaces a set of lines of form (including their properties dynamically applied) with a new series with different properties. It is necessary to apply the function whenever a new set of lines is displayed. The best way to proceed is to call the function using an dynamic after Refresh with a dynamic range action:

    Event: After refresh

    Selection type: Region

    Region:

    Action: Run the JavaScript Code

    Scope of the event: Dynamics

    Fire on Page load: Yes

    Code:$('[name=f04]').change();

    Note that rows 13 & 18 in your function cause errors of execution. As I do not understand the purpose of these that I commented on them in order to demonstrate the dynamic action solution:

    function test2(pThis){  // orpheus4192
      var v_item_value = pThis.value;
      var v_hiredate_item = $(pThis).closest('tr').find('td[headers=HIREDATE] input[name=f05]');
      var v_hiredate_button = $(pThis).closest('tr').find('td[headers=HIREDATE] button');
      var currIndex = $('select[name="'+pThis.name+'"]').index(pThis);
      var currRow  = currIndex+1;
    
        //alert(pThis.name);
      if ( v_item_value == '20' ){
          v_hiredate_item.prop('readOnly',true);
          v_hiredate_button.prop('disabled',true);
    
          //document.getElementById("f08_"+[currRow]).disabled=true;
      }
      else{
          v_hiredate_item.prop('readOnly',false);
          v_hiredate_button.prop('disabled',false);
          //document.getElementById("f08_"+[currRow]).disabled=false;
      }
    }
    

    Things are not helped by the mixture of techniques here. The code would be easier to understand and maintain if a coherent approach was followed. It is recommended to always use jQuery to select and manipulate items, then select the items of dynamically across the table from the declarative mode headers attributes, rather than trying to understand the absolute values of ID from the control of the name and line numbers. It's much more intuitive, generally requires less code and is waterproof later insertions and changes in the order of the columns. Potential problems are only the changes to the control type or the column alias (because the latter is generally required in the selector), but these changes are likely to occur less frequently.

    Do not forget that to get the headers consistent and understandable static ID selectors must be applied manually to the IR columns in APEX 5.0...

Maybe you are looking for

  • Noisy fan on Satellite A40

    Hi all Can someone please?I have a Satellite A40-241 and the fan does not stop cutting in the sense and sounds like its's going away it is noted blocking the fan in a form any way! All ideas Thanks Steve

  • Windows Update fails for KB980182 with error code 80071AA7 and a few references to sqmapi.dll

    ... Support as good phone & E-mail have told me that my installation of IE8 is corrupt and that I should reinstall Windows. IE is part & parcel of your operating system (e.g., Windows): If IE8 is "corrupt", Windows is corrupted, too. If this is the c

  • Access to Windows Live

    I have Vista and use Windows Mail, I also have a Windows e-mail address at which I am more able to access live. If I download live.com.wlmail it would interfere with my windows mail, or have a separate icon?  I like to keep my separate live address.

  • Why as I get Install Java games pogo - this happened today and if I reinstall still the same

    Today, when I went on Pogo to play games I've had that need to install Java.  So I reinstalled and still can not play in Pogo.  Just a window to install Java again and again. I am very disappointed by Windows 7 Home Premium.

  • associate the service profile to the server

    Hello Only I got this error when you try to assign a service profile to a server configuration failedReason for the failure: problem with the boot order, possibly not found vhba or start target not found Is that the association of service profile req