code calls Word, exe only

Similar Questions

• Is it possible to call a .exe (non-LabVIEW, such as Notepad) in a child windown on the front panel?

  I would like to launch a stand-alone .exe inside the front of my VI.  It is a piece of software by the provider of a sensor that I try to incorporate in my VI.  I was able to find how to call the .exe using the .NET constructor and invoke nodes.  However, the application opens in its own window.  Is there a way to run from a child window within the façade (ideally, within a tab on the front panel control)?

  I'm in LabVIEW 8.6.

  Thank you.

  smercurio_fc wrote:
  I don't think that it actually works. My understanding is limited about this feature, but since I read it only works with the pop-up windows and windows that are already children. The application's main window is not a child window.

  I've done it before.  I have attached a simple example using Notepad.  Make sure that the notebook is already open no open files.  Since the example is not the position of the child window, the position relative to the window will be the same, because it is off the desk.  So, make sure the upper left corner of the Notepad is close to the origin of the desktop computer.

• I need to find and kill a virus called hckr\.exe who attacks my registry keys. How can I get in the registry keys so I can kill him?

  Somehow August 2, someone was able to successfully plant a virus on my computer. My antivirus software has been able to kill most of it, except for one thing. That something is called hckr\.exe and it attacks my registry keys and IE I have a broken file association system completely affects all skills of my computer to recognize are own programs. I need 1. > find and destroy this program hckr\.exe, 2. > remove any embedded backup files and 3 > restore my registry keys and files association system so that my computer works correctly. Please, I could really use help until I don't have a computer on the left.

  Hello

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be harder to detect as
  the cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  --------------------------------------------------------

  Check with:

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------------------------------

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp?prevx=Y  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  -----------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  RUN - type in the box-

  sfc/scannow

  Then run checkdisk (chkdsk).

  RUN - type in the box-

  Chkdsk /f /r

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ================================

  For extreme cases:

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  ================================

  If you are in North America, you can call 866-727-2338 for virus and spyware help
  infections. See http://www.microsoft.com/protect/support/default.mspx for more details. For
  international information, see your subsidiary local Support site.

  Microsoft support - Virus and Security Solution Center
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#TAB0

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I don't have a product code for word 10 that was installed by Staples, when I bought my new laptop. Staples said that they do not have it. What should do?

  I bought 10 word a few years ago when I bought a new laptop, and had him install Staples. I later discovered that I need the key code of the product for Word and called Staples. They said it should be on the label at the bottom of the computer - but this number seems to be the code for Windows 7. I still need the code for Word but do not know how to find. Any suggestions?

  Belarc Advisor or MagicJelleyBean can recover the key on a working PC

• Calling a function only when the State is active

  I turn to find the event just to call a function only when the status is active. In fact, I created a State to display the 'product details' click and once the system changes to this State - I have to perform a function.
  
  Here's the context:
  
  Let's say that you are on the home page where you will need to click on a product to see details. By clicking on the product, the State to view the details of the product will be activated and a variable inside the new state you will receive all the data (from the class of product). But I discovered Flex run all States at the beginning and we need to watch how declare our function to make sure that we do not have a null to a variable/object reference. Given that value is moving to the State only when the click event to occur, the process of globalization, execution of all States at the beginning will not have any value yet (for the specific product to deal with in the State of the productDetails). So I can't use creationComplete to perform a simple function like setSpecs(), where all the values (for example, width, height, circumference, diameter, price, etc.) will be instiate specific labels.
  
  What event to use to call a function internal once we are in the State? Just using the creationComplet and stated if he check the currentState = that I have to work on is not enough. I tried 'activate', 'show', 'enterStage' and many others, but without success. I tried to search the Internet, but it seems that this problem is not popular enough to generate sufficient results.
  
  But I know that it is possible in the case otherwise it will be is not logical and since Flex work very well with the event, I found the right event. It's something basic I know, but when you do not know, it seems difficult to find! ;-))

  Thanks Greg!

  I agree, this is a better method. So I'll change my SENSITIVITY to use viewStack instead of the State. But the problem persists what that, if we use the viewStack State to launch an event only when the State/viewStack is displayed on the screen.

  I found something that works very well for me: updateComplete.

  First of all, I found this before reading your information about viewStack so it worked very well for the method of the State. That I decided to do a test to viewStack and made the necessary changes to the code to reflect a viewStack navigation and make sure the updateComplete was not within my component (stateProduct.mxml). The system was not able to view the specification as the setSpecs() function was not instantiate when displayed. I added the updateComplete = "{setSpecs ()} ' and everything worked great!" So I conclude that no matter if you are using a viewStack State, the updateComplete event can be used to run or functions only when the component is displayed on the screen.

  Now, I have to make my transition between the State working with viewStack effect! ;-))

  Thanks to Greg for this useful tip!

• the call firefox.exe - ProfileManager does NOT open the Profile Manager does NOT create a new profile, KILLS the old session tabs, but all pinned!

  FF 7.0.1 on Win7 pro 64

  A behavior more bug / odd:
  calling "firefox.exe - ProfileManager".
  -do NOT open the Profile Manager,
  -does NOT create a new profile,
  -seems to do NOTHING (no change around records profile etc.).
  but...
  -KILLS tabs former session.
  -KILLS old session and leaves nothing to restore,
  -KILL all my pinned tabs!

  OK, I should downgrade to FF4.0.1, or same 3.6.x?
  These releases are much more reliable than 6 + 7 running!

  Try using this:
  
  Firefox.exe Pei

• Satellite L670 - 11 d - AV spent hours to analyze the files called nnnnnn.exe

  I noticed that my AV has spent more than an hour in the analysis of a single folder on my L670 - 11 d.
  I had a look in the Explorer and found 96 379 files called + nnnnnnnnnn + .exe, where + n + is a decimal digit, in C:Windows\ServiceProfiles\LocalService\AppData\Loc al\Temp\.
  They were all identical apart from their name and their properties have indicated that their original name was Realtek Semiconductor RTInstal.exe.

  This model has a Realtek ethernet NIC
  The OS is W7Pro 64-bit.

  Can someone explain why I should have close to 100,000 copies of the installer, and how I can get rid of them?
  I can't imagine that I need them.

  Noel

  Hi mate

  Have no idea why you have so many temporal files on the HARD drive, but I recommend always deleting these temporal HARD disk files.
  I always do with tool called CCleaner. It s freeware tool so you can download it for free from these pages in internet.
  It cleans the HARD drive each time when starting of the OS.

• How to generate the file word read-only format

  Hello

  I'm generating a word using Report Generation Toolkit file. I want the file word read-only format. Can someone tell me how to do this using Report Generation Toolkit?

  Kind regards

  Renaux

  have you tried the game permissions.vi?

• A process called "svctimesag.exe" consumes high CPU on the Production Server.

  OT: svctimesag.

  Hi team,

  In one of our Production Server is a process called "svctimesag.exe" using high CPU. This problem has been detected the day before.

  For immediate solution, we killed the process, but it did not help, then you need to restart our server.

  In the past 24 hours this process has shoot to the top of the CPU twice and you need to restart the server with force.

  Also searched the Internet but found no information. The location of the file on the server is C:\Program Files (x86)\Products\svctimesag\svctimesag.exe

  We organize engine on the server management application. We also opened the case with them to know the process.

  If any user face any problem with that part of process please your valuable troubleshooting strike.

  Thanks in advance.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Call Subvi exe

  Hello

  I call an exe with exec system block. I build this exe with Labview application builder. I need to open the front of some included subvi and I need to close them when they finish. The installation of the node subvi is configuered in this way: see the front when it is called. Close then initially closed. The first time I don't understand these subvi tab source file for the request of the manufacturer, so the application opens a pop up error. Can I include the source file tab: the program now works, but the screws are all open when the application starts. I don't like it. How could I answer exactly the behavior of VI in the exe file?

  Thank you

  Use nodes of property within the Subvi itself to open and close the front panel.

• I am unable to access the Windows XP updates and unable to set up the automatic update. I have not given an error code. I was only told I can't perform these functions.

  I am unable to access the Windows XP updates and unable to set up the automatic update.  I have not given an error code.  I was only told I can't perform these functions.  I don't have the windows disk that the computer came preloaded with Windows and I don't remember the Administor password I created 5 years ago.  Can anyone help?

  Assume that:

  http://support.Microsoft.com/kb/316524

  You receive an error message 'Administrators' only when you try to visit the Windows Update Web site or the Microsoft Update Web site

  http://support.Microsoft.com/kb/189126

  Microsoft's strategy concerning lost or forgotten passwords

  What I can offer: http://support.microsoft.com/kb/321305

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

• When I play a game on facebook called words with friends, my computer freezes the game after a few movements.

  original title: computer freezes

  When I play a game on facebook called words with friends, my computer freezes the game after a few movements.  Why?

  Hi ileendunman,

  1. have you done any hardware changes or software on your computer before this problem?

  2. what browser do you use?

  If you use Internet Explorer, you can follow this link & check if the problem persists:

  The problems of games online using Internet Explorer

  Hope the helps of information.

• My CPU usage climbs to 100% & an application called iexplore.exe uses 99% of CPU time.

  Original title: iexplore.exe

  When I activate "Task Manager", my CPU usage climbs to 100% & an application called iexplore.exe uses 99% of CPU time. This slows down my computer. I can turn it off without causing other problems?

  After restarting in safe mode and then restart in normal mode, all is back to normal. Thank you!

• Is DropMyRights.exe only for XP?

  Original title: DropMyRights

  Hello

  Is DropMyRights.exe only for XP?

  Thank you

  Carbond

  Hi Carbond,

  DropMyRights application is designed for Internet Explorer & Outlook.

  For more information, see these links.

  Browsing the Web and reading e-mail safely as an administrator

  http://TechNet.Microsoft.com/en-us/library/bb456992.aspx

  Hope the helps of information.

• Recently, I noticed that I have a process called VProt.exe running. What is the Vprotection application?

  Original title: Vprotection application?

  Application of Vprotct? Recently, I noticed that I have a process called VProt.exe running. What is the Vprotection application? I have no files named when I try to search for it.

  Hi Baldwin16, Matt

  Welcome to the community of Microsoft and thanks for posting the question.

  1. who is the antivirus installed on the computer program?

  2. do you use AVG products?

  3. do you have problems regarding the application Vprotection?

  Vprotection is a part of AVG Safe Search Toolbar; Some malware will be a miscarriage as vprot.exe.

  If you have not installed or there is more than one instance running it may be something else. You can check if it is authentic, by locating the file, view the digital signatures tab and checking the signer are AVG Technologies.

  If you have installed the AVG program, you don't have to worry about the processes running on the computer. If you need help with the application, I suggest you to contact AVG support.

  Reference:

  AVG forums

  http://forums.Avg.com/in-en/AVG-forums?sec=theme&Act=show&ID=1

  Hope this information helps. Please reply back with the State so that we can help you.