Code Error 80070002

Similar Questions

• Windows update code Error 80070002

  I followed all the instructions in Windows Help (disable Windows Update, clean records in respect of the distribution of software updates, restarted, check the updates).  Still get the above error code.  Vista on this computer.  Try to download update of Norton but will not download because no SP.  Help, please.

  Hello

  1. you did it all change on the computer before the show?
  2. What is the exact error message that you receive when you try to download Norton?

  
  Method 1:
  You can run the fix it provide in the link and check out:
  Diagnose and automatically fix common problems with Windows Update
  http://support.Microsoft.com/mats/windows_update/
  
  Method 2:
  You can try to follow the steps of knowledge, provide the base article and check:
  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
  http://support.Microsoft.com/kb/910336
  
  You can also try the steps from the link provided and check:
  Windows Update Error 80070002
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

• Code Error 80070002 and previous pop ups saying that he has not found windows program

  What is the problem with my computer! I am installing the vista update to upgrade to windows 7 and all I get is error code 80070002 I deleted the update history, as the evil grows said but I still get the same code. Thank you!

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

  Windows Update Error 80070002

  There is more than a little advice on the link above to fix the 80070002

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Windows Update Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Error codes: 1134300405 & 80070002 (cannot install updates)

  I can't do windows updates each time click on windows dates I get an error code 1134300405 and now I get the error code 80070002 I did something but no good help! Thank you

  Check this

  http://Windows.Microsoft.com/en-in/Windows-Vista/Windows-Update-Error-80070002

• I can't download the updates to my computer which is a vista. The error code is 80070002

  Original title:

  I can't download the updates to my computer which is a vista.  The error code is 80070002.  I did the instructions of self-help, and I still cannot get the updates.  I can't even download the program to 'fix' to determine what the problem is!

  Hello

  1. What are the troubleshooting steps you have tried?

  2 are. what fixit you referring? What happens when you try to download it?

  3 did you changes to the computer, before the show?

  Method 1:

  Run this fixit and check.

  The problem with Microsoft Windows Update is not working

  Method 2:

  Check out the following link.

  Windows Update Error 80070002

  See also,

  You cannot install some programs or updates

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

• Problem starting wondows Vista after installing updates error code 0 * 80070002.

  I have Vostro1400 from Dell with Windows Vista. After you install the updates recently, the screen is empty. It doesn't show anything except cursor (arrow). Diagnostic equipment doesn't show any problem. Windows does not start in SafeMode also. If I tried to restore from previous restore point then it will display the error code 0 * 80070002.

  What should I do?

  Hello

  You can check this link:

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services

  http://support.Microsoft.com/kb/910336

• Windows 8 - cannot install updates Error 80070002 and 80246007 codes

  Until recently, I was able to update all apps very well. Then I installed all the more recent windows updates and now I can is more updated of all the apps or install everything new.

  I've had Netflix on my computer but need an update, so I tried to update and it gives me Error 80070002 first and I try again and get 80246007.

  I also tried to install windows 8.1, seemingly not too well.

  I ran the windows update tool and there were a few problems found:

  Recent updates installation problems (not fixed)

  Search for missing or corrupted files (detected)

  Don't know how to solve this. A lot of post say try installing updates windows again, but how can I remove the old ones and reinstall the new?

  Or any other method would be useful.

  Thank you.

  Hi FrancescaIdone,

  These instructions should help clean up the files missing or damaged:

  http://support.Microsoft.com/kb/929833/en-GB

  http://www.thewindowsclub.com/disk-error-checking-Windows-8

  Please try to run Windows updates thereafter

  Hope this helps

  Martin

• Service pack 1 installation of not-Windows Update Error 80070002.

  Original title: Service pack does not install it.

  Hello

  I had to restart my laptop (Windows Vista) to factory setting because the system has begun to slow down; I now can't install SP1, it appears on the new & new window updates and downloads in a few minutes. Although it does not install correctly.

  I still can not download Norton because it requires service pack 1.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Validation status: genuine
  Validation code: 0
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - 4GV68 - 6D8JB-G6MF9
  The Windows Product Key hash: au + OBZ1y48sKA/bWkfKXiuCrOjY =
  Windows product ID: 89578-OEM-7332157-00203
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.0.6000.2.00010300.0.0.003
  ID: {2517015B-18C6-4826-A728-38DF83AB7F75} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows Vista (TM) Home Premium
  Architecture: 0x00000000
  Build lab: 6000.vista_gdr.100218 - 0019
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 7.0; Win32)
  Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {2517015B-18C6-4826-A728-38DF83AB7F75}1.9.0027.06.0.6000.2.00010300.0.0.003x 32*-*-*-*-G6MF989578-OEM-7332157-002032S-1-5-21-1414528651-3301326876-351726145Sony Corporation,VGN-FZ11SPhoenix Technologies LTD.R0050J720070418000000.000000 + 000E1323507018400FA08090409GMT Standard Time(GMT+00:00)03SonyVAIO109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.0.6000.16509
  Name: Windows Vista, HomePremium edition
  Description: operating system Windows - Vista, channel OEM_SLP
  Activation ID: bffdc375-bbd5-499d-8ef1-4f37b61c895f
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 89578-00146-321-500203-02-2057-6000.0000-1052013
  Installation ID: 102120767924454475951502567153512013056414419884416224
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkId=57201
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkId=57203
  Use license URL: http://go.microsoft.com/fwlink/?LinkId=57205
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkId=57204
  Partial product key: G6MF9
  License status: licensed

  Windows Activation Technologies-->
  N/A

  --> HWID data
  Current Hash HWID: NAAAAAEAAwABAAEAAQABAAAAAwABAAEAJJR + N/LlvO5wsEaDwoOcB/L0KhN2niaWrFYqhQ ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20000
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC Sony VAIO
  Sony VAIO FACP
  HPET Sony VAIO
  Sony VAIO BOOT
  MCFG Sony VAIO
  TCPA Sony VAIO
  SLIC Sony VAIO
  Document TMOR Sony VAIO
  APIC Sony VAIO
  SSDT Sony VAIO
  SSDT Sony VAIO
  SSDT Sony VAIO
  SSDT Sony VAIO

  Hi Keshwala,

  We need a few details to help you install Service pack 1, please answer the following.

  1. What antivirus application do you use on your computer?
  2. Was no problem with the installation of other updates to Windows?
  3. You have the Windows Vista installation disc?

  You can refer to the following methods, these could help you install Service pack 1 on your computer.

  Method 1:

  If you receive the error Windows Update 80070002 of updates, you must remove the temporary files to update that Windows uses to identify updates for your computer. see the methods in the following link.

  Windows Update Error 80070002.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

  Method 2:

  Disable the antivirus software, install the service pack and check the issue stattus.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  You can also refer to:

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services

  http://support.Microsoft.com/kb/910336

  I hope this helps.

• Error 80070002 could not install windows SP1

  I am installing service pack 1 of windows. When I try to install it, it remains at 0% for a long time and then eventually say the installation failed with a 80070002 error code. I need help!

  Hello

  wrong forum

  Windows Update Error 80070002

  If you receive the error Windows Update 80070002 of updates, you must remove the temporary files to update that Windows uses to identify updates for your computer. To remove temporary files, stop the Windows Update service, delete the temporary update files, restart the Windows Update service and then try to check for Windows updates again.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

  _______________________________________________________________________

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

• Windows vista SP1 failed to install about 50 times Error 80070002

  My windows vista service pack 1 did not install.  Error 80070002... Windows tried as an automatic update, and I tried to install manually from windows... I don't know what to do to have it installed.

  • Windows Update Error 80070002
    http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002
  • Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
    http://support.Microsoft.com/kb/956698
  • Description of the update of the system for Windows Vista tool
    http://support.Microsoft.com/kb/947821
    0 X 80070002 ERROR_FILE_NOT_FOUND
  • You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
    http://support.Microsoft.com/kb/910336

• Windows 7 update does not not Error 80070002

  Hello

  I bought a new computer from office in February 2015.  It came with Windows 7 Professional SP1 is installed.  As far as I know, the updater has stopped working early August 2015.  I did not notice until November when I started having the BSOD make.  BSOD issues were fixed by replacing the RAM.  I was not able to get Wu to work.  I get an Error 80070002.  I was getting this error when I got BSOD problems.

  I downloaded system preparation tool.  I have the option of WU or BITS.  When you run the WU, the result is sign up for the Service is missing or corrupt (fixed) and discovered problems to install recent updates (not fixed).  When executing the PIECES, I get the same thing, more an error 8007005 (not fixed).

  I have reset my WU SET of components through the automatic.

  I tried the command prompt raised by what follows,

  net stop wuauserv
  CD %SystemRoot%\System32
  Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
  net start wuauserv
  no luck.

  Then I tried to download the last Agent WU.  It would download and try to install, but I received the following message. "Windows Update agent has met with a fatal error."  I looked at the version I have.  It's 7.6.7601.19016

  Then I tried the command prompt raised by what follows,

  regsvr32 Jscript.dll
  regsvr32 c:\windows\system32\wuapi.dll
  regsvr32 c:\windows\system32\wuaueng.dll

  While they did save, WU still doesn't work.

  I tried to reset the WU components manually.  An error I got was "Module mshtml.dll was loaded, but the DllRegisterServer entry point was not found.  I also had this error for the following files: shdocvw.dll, browseui.dll, qmgr.dll.

  I also have the following error.  'The module failed to load msxml.dll' I also had this error on the following files: gpkcsp.dll, sccbase.dll, slbcsp.dll, c:\windows\system32\muweb.dll, initpki.dll, wuaueng1.dll, c:\windows\system32\dllcache\wucltui.dll and wuweb.dll.

  I'm out of ideas how to run Wu.

  Can you help me please?

  Thank you.

  I upgraded my ASUS K52F Notebook for Windows 10 on July 29, 2015. I fought with Microsoft for 7 months for a PATCH to cause problems with Internet Explorer and Microsoft Edge Online. No technical support from Microsoft could find a SOLUTION to my problems on Windows 10. So, I bought a new Western Digital 500 GB hard drive black. I removed my Hitachi 500 GB hard drive with 10 Windows and installed my new unallocated hard in my book. I dug my Windows 7 Home Premium OEM Operating System disks provided with my laptop when I bought it. I restored my laptop that I use now, back to Win 7. After restoration of Win 7, I went to Windows Update and tried to find the updates for the first time. I got a X RED and 2 Error Codes (0xc8000247 & 0xc8000222), after searching a FIX of the Web, I found 3 PATCHES.

  1 FIX tried: I had to install (NetFramework V4.5) for Windows Update and here is the link where I found the download: https://www.microsoft.com/en-us/download/details.aspx?id=30653 download, install, reboot.

  2nd FIX tried: I had to install (Intel Rapid Storage Technology Driver) for my new 500 GB hard drive. Here is the link where I got it: https://downloadcenter.intel.com/product/55005/Intel-Rapid-Storage-Technology-Intel-RST- download, install, reboot.

  3rd FIX tried: this DIFFICULTY, I took a picture of my phone because I didn't have my loading printing software so I could print actually fixed my Windows Update do not answer question, after restarting wuauserv file in the command CMD, I went to Windows Update, you click on check the updates and after a few minutes , Windows Update has begun ads updated to choose from, worked great after you restart the Windows Update program. NOTE I did hard restart my cable Modem by unplugging the power cord for 2 minutes and then rebooted my Cable Modem before this 3rd correction.

  Windows Update not responding do not after Windows 7 restore

  FIX SOLVED!

  Step 1: Click Start

  Step 2: Type in: cmd

  Step 3: right click on cmd in the start menu and select "run as Administrator"

  Step 4: Type: net stop wuauserv

  Step 5: Press enter

  Step 6: Type: ren c:\windows\SoftwareDistribution softwaredistribution.old

  Step 7: Press enter

  Step 8: Type: net start wuauserv

  Step 9: Press enter

  Step 10: Type: exit

  Step 11: Press enter

  Step 12: Go to Windows Update and updates

  To do this, step by step as written above and notice the required spaces as written and the update of Windows will start to work again. This FIX is allowing you to restart Windows Update Command.

  When you type: net stop wuauserv (net (space) (space) Stop wuauserv)

  When you type: ren c:\windows\SoftwareDistribution softwaredistribution.old (softwaredistribution.old c:\windows\SoftwareDistribution(spacebar) ren (space)

  When you type: net start wuauserv (net (spacebar) start (spacebar) wuauserv)

  NOTE: It confused me too on my first try, but I quickly figured it after the PATCH twice in a row and it worked for me.

  Now my updates come left and right, last night I got 1 update that has been setup for Windows), then 96 updates before going to bed. This morning I had 286 updates installed, get them now.

  All I can say is what I said here, it worked for me and I thought I'd share my experience with this correction for others, I hope this work for you as it did for me. Thank you! GTIN

• Upgrade to Windows 10 Error 80070002

  When you upgrade, it stops with code 80070002, any ideas? Windows 7

  Assuming that the Win7 computer is already fully-patched and you attempt to update through Windows Update, start here: http://windows.microsoft.com/en-us/windows/windows-update-error-80070002

• code error-8072

  I can't empty my trash. The operation cannot be completed because an unexpected error has occurred (code error-8072).

  Does anyone have an idea what this error code means? Or better yet, how to fix this?

  Stop

  Unplug your external devices

  Restart in safe mode

  Try safe mode if your Mac does not end commissioning - Apple Support

  Check your hard drive with disk utility

  Using disk utility to check or repair disks - Apple Support

  then empty the trash

  Stop and reconnect the devices and start normally.

  If the problem persists, check your system with AHT

  Using Apple Hardware Test - Apple Support

• How can I fix the code error 56?

  Two years ago, I bought my iPhone6 (to the US Apple store) and I used iPhone6 in South Korea. So, I can't take refurbish here.

  When I was trying to update iso 9.3, pop up code error 56 at the end of the update process. so, I removed the chip from the usim card and tried again. but the pop-up code error 56 again. How can I fix this error?

  Take a look at these articles:

  Solve the iOS update and restore error in iTunes - Apple Support

  Get help with iOS update or restore errors - Apple Support

• Get a zip code error when your book order

  Getting a zip code error when your book order is exact zip code th for my address.

  In the Canada.

  Help

  You order the Canadian Apple store online? If this isn't the case, then you must change your store site online on the Canadian site. Scroll down to the bottom of the page where you should find an icon of circled on the right corner flag. Click it, and then select the Canadian store in the list and re - buy article. It must now accept Canadian postal codes rather than postcodes American.