code error 80070643 when you install KB2938459

Similar Questions

• Code error 1603 when you install Microsoft 3500 wireless mouse

  Display in the name of the customer

  Code error 1603 when you install Microsoft 3500 wireless mouse

  Using toshiba satellite A - 75 Widows XP - based customer ID

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/953691

  Check if that helps.

• Code Error 80070020 when you install the KB2756919 update

  It downloads NO MORE than 11% and it's all FAILED EVERY TIME!

  First, check the site Download of Windows for direct download on the update that gives you bad. Manually download your update from the following link, then right click on the downloaded file and run as administrator. Acknowledge the UAC warning and provide credentials if requested. This grant you elevated privileges that may be necessary to carry out the reconfiguration of the system.

  MS13-004: Description of the update of security for .NET Framework 3.0 Service Pack 2 on Windows Vista Service Pack 2 and Windows Server 2008 Service Pack 2: 8 January 2013
  Recommended if you can't always install the update, the next steps are to reset the Windows Update components or an update of the file downloaded a new attempt after performing a clean boot or boot without failure. A clean boot or Mode environment safe is important to ensure that there are no other programs that may be locking files or otherwise interfere with the upgrade process.

  How to reset the Windows Update components?

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8

  Start your computer in safe mode
  Any Windows Update file can be manually applied using this method. To quickly access the correct download, just replace the # part of the link with the numbered part of the KB update #.
  http://support.Microsoft.com/kb/###

• I get an error 80070643 when you try to do an update. __

  I get an error 80070643 when you try to do an update. Using Windows 7 Pro. The updates seem to be security patches. Any ideas?

  Hello

  Windows Update error 80070643 can happen for several reasons. The most common cause is a problem with the .NET Framework is installed on the computer. You can also encounter this error when installing updates for Microsoft Office 2003. If you were installing Microsoft Office 2003 updates when you received the error, follow the instructions in the "Microsoft Office 2003" section below. Otherwise, follow the instructions in the "Windows.NET Framework" section in the article below:
  Windows Update error 80070643
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070643

  Also see the article below:
  You receive the error 0 x 643, error code 0 x 80070643 or updates may be offered again when you try to install the .NET Framework updates when you use Windows Update or Microsoft Updates
  http://support.Microsoft.com/kb/976982

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Code error 8024002d when you use Windows Update to install the update of security for Director 2.6 for windows vista

  I get the error code 8024002d message when you use Windows Update to install the update of security for Director 2.6 for windows vista. It try to install then a window pops up saying: he cannot locate a file called "MM26_ENU [1] .msi '. I have serached my PC and no such file exisits. Grateful for any help. This is supposed to be an update of important safety for Movie Maker.

  Alan McC
  Do you have other accounts of users on this PC?  If you install this update from the main account?

  You should get the number of the update of the updated history list and then download the file here: Microsoft downloads.
  If sure that nothing else is running, and then install the update manually.  Give it a try and let us know the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error 0 x 80070643 when you install a Windows program

  original title: windows errors

  How can I get rid of the error 0 x 80070643 when you try to install mse & erorr fatal 'Motif Chorus customer'?

  Hi derekw23,

  1. did you of recent changes on the computer?

  2. you have any software from third-party security installed on the computer?

  3. are you able to install other programs successfully on the computer?

  4. When you get the fatal error on the chorus of reason?

  Check out the link below for thread with a similar problem with the installation of Microsoft security essentials and try the steps mentioned, check if it helps.

  http://answers.Microsoft.com/en-us/protect/Forum/protect_start/installation-error-0x80070643/908fad3e-F9FC-4d8a-BE83-ae7d3bc48db5

  Chorus of reason is a part of a program that collects and stores information about your PC with the intention to provide more effective customer support.

  If you get the fatal error after startup then you uninstall the Chorus of the computer design program and check if it helps.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

• code error 80073712 when you try to install kb2544893

  While trying to install the update of security for windows vista (KB2544893), I get an error code 80073712. How can I solve this problem?

  Hello

  read this

  Error message when you try to install updates on the Microsoft Update or Windows Update Web site: "0 x 80073712".

  http://support.Microsoft.com/kb/957310

• Error 80073701 when you install Windows 7 Service Pack 1

  I met an error code 80073701 when you install Windows 7 Service Pack 1 and it could not be installed in my PC.

  So, what should I do to solve this problem. Thank you very much!

  Hi Charles Leung,.

  It is sufficient to indicate the complete error message you receive?

  Method 1: Run the Windows Update troubleshooting tool, then check

  Open the Windows Update troubleshooting tool

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  Method 2:  Download and install the update the system tool

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  http://support.Microsoft.com/kb/947821

• 0001 0002 error message when you install printer drivers

  I get the 0001 0002 error message when you try to install the drivers for a Canon Pixma MX892 printer. Five different Canon representatives tried to find a solution - nothing works. (It seems to be a Windows error message rather than generated by the installer of Canon).

  The error message appears when a) using the disc of Canon or the drivers of its Web site; (b) after a reboot selective; (c) when the Norton firewall is disabled; and d) each combination of a) through c). It also occurs when

  The exact time wherever it occurs during the driver installation process is when Setup "enrolled in the program of information."

  Is the exact wording of the message: an error has occurred while files were copied: 0001 0002.

  I am running Vista 32 bit and download the drivers using Firefox 18.0.2.

  After you have installed many printers without a hitch, it drives me crazy.

  Like you, I thought it was an Epson printer software installation problem and went bought a Canon.  Still I can not install two printers software.  The Epson and Canon customer service can not helped at all.  That's when I decided to contact Microsoft.

  Yes, I paid for the premium service, and I am pleased that they have set all my PC problems.  Takes about 2 to 3 hours to complete the work. I firmly believe that it is worth the money, in my case.

  In any case you can try this free fix by running Microsoft FixIt from this link or copy the address into your browser-

  https://support.Microsoft.com/en-us/mats/windows_file_and_folder_diag/en-SG

  I had also used this FixIt several times since to 'fix' everything OS files were inadvertently corrupt or have "disappeared".  Good luck.

• error 0X800f0214 when you install the printer driver

  When you install a printer driver (network), an error message appears saying that the action could not be completed - error 0X800f0214. The printer is shared and my firewall is set to off. I have absolutely no idea on what to do and would like to get advice and INFO.

  Marc DS,
  It would be useful to have a bit more information, such as the make and model of the printer, what version of Vista you are running and what type of network - wired or wireless (or both), if there are other non-Vista on the network computers, etc.  You get the error message corresponds to "the specified path does not contain any applicable device INFs" which means basically the location where the OS is looking for the driver file does contain a valid driver file.  There could be several reasons for this, but without knowing the configuration of network and printer, it's hard to identify.  Make sure that the driver is one that is suitable for this printer model and your version of Vista and make sure that the path (c:\ - or other) is correct and that the location of the driver file is shared.  I hope this helps.  Please post back with more information if you still need help.

  Thank you, Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message when you install the first elements 10 on my PC

  I bought the Pack Adobe Photoshop Elements 10 and Adobe Premiere Elements 10... and when trying to install, have successfully installed Adobe Photoshop Elements 10, but get an error message when you try to install the first Elements 10.  The Error Message reads as follows:

  This installation package is not supported by this processor type.  Contact your product vendor.

  Now that?  I don't know what to do from here.

  Could you please someone get back to me?  Thank you

  Hello

  Disc 1 contains the installer for 32-bit Windows.

  Disc 2 contains the installer for Windows 7 64-bit.

  Disc 3 contains the installer for mac OS.

  Disc 4 is the content of the disc for Windows Adobe Premiere Elements.

  Disc 5 is the content of the disc Adobe Premiere Elements for Mac OS.

  You can install from Disc1, 2 or 3 depending on the operating system running on your computer.

  Thank you

• Error code 0 x 80070643 when you install KB951847 & KB982168

  In windows update, try to install the following updates, I get error 80070643 0 x or 0 x 643.  How can I install these updates?

  1 KB951847 MS Net Framework 3.5 SP1 Update

  2 KB982168 MS Net Framework 3.5 SP1 Update

  Hi Jburski,

  1. what version of windows are you using?

  2. did you try to install the updates manually or through windows updates?

  This problem may be caused by a corrupted state of the .net framework that currently exists on your computer. This can be caused for various reasons including, but not limited to: other applications by overwriting files .net, viruses and corrupted hard disk sectors.

  Follow the suggestions in the article below.
  http://support.Microsoft.com/kb/976982

  You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates
  http://support.Microsoft.com/kb/958052

  I hope this helps.

  Bindu R - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• What is the code for error E0434F4D when you install netf EPI 1.1 service pack 1

  I tried to install an update to Microsoft .net Framework 1.1 SP1, update security for Microsoft Visual C ++ 2008 (KB2538243) and .net Framework 3.5 Family Update x 86 (KB959209) without success. I kept getting code error E0434F4D, 64 c and 80070663 respectively. Help, please. I can't evaluate all my files window

  Hello

  Method 1:
  You try to use clean tool to remove corrupt .net Framework works.
  http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx
  You can perform stand-alone C++ and .net

  Method 2:
  You can run the fix it and check.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  Method 3:
  You can also troubleshoot windows update using the link:
  Troubleshoot problems with installing updates.
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 4:
  If the problem persists, then try to put your computer in a clean boot state, and then try to install the updates.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

  
  Method 5:
  You can also try the steps in the supplied knowledge base article and check.
  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:

  http://support.Microsoft.com/kb/322756

   

• Why do I get VISA code error-1073807202 when you try to connect the PXI-2565?

  I got the 1703807202 error code (a code library required by VISA is not found) every time when I start the computer and used 'Initialize with topology' first connect my channels.  This error could disappear if I start MAX and open devices and interfaces, then re - perform the same task.  How can I get rid of the error?  Thank you.

  My bad, GPIB driver has not been installed

• ERROR MESSAGE WHEN YOU INSTALL UPDATES

  "WindowsUpdate_00000001" "WindowsUpdate_dt000"

  Above IS THE CODE of ERROR WHEN WINDOWS UPDATE I KEEP TRYING AGAIN, TO no AVAIL.

  FRANK WEATHERLY

  Hello

  ·         What are the updates that you try to install on your computer?

  ·         What is the version of Windows installed on your computer?

  Follow the link to check the updates are being installed.

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  Step 1:

  You can configure the computer to clean the start state, and then try to install the updates and check if that helps. To configure the boot of the computer follow the link below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Step 2:

  Also, you can download the packs of stand-alone for updates and install them manually on your computer and check if that helps.

  To download the updates follow the link given below, put in the number of KB to search for the update, and then download and install the same.

  http://www.Microsoft.com/downloads/en/default.aspx

  Step 3:

  You can also try running the fixit in the sub article given

  How to reset the Windows Update components?

  http://support.Microsoft.com/default.aspx/KB/971058

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.