code printer hp4500

Similar Questions

• When I try to print on a printer connected to my win7 I get code "printer not responding" 105-100003

  How to fix error code 105-100003

  I am running windows7 on my host network and vista on the other computer. I am able to connect to the correct internet on vista computer, but when I try to print on a printer connected to my win7 I get code "printer not responding" 105-100003. I printed before and I have not changed or added to any software since. Both computers are desktop computers and connected by ethernet cable. I have run diagnostics and checked all cables. I have a modem 2 son I had about 2 months.

  Hi, Jimmy.

  Make the printer and model would be useful.  Thank you.

  Try the following:

  If your printer is connected via a wireless network:

  1. Make sure that your printer is turned on. (Start button / stop is turned on).
  2. Make sure that the blue LED of Wi - Fi on the front of the printer is on and stays on.
     • If the blue wireless LED flashes, your printer is not connected to your router.
     • 1. Follow the steps in the configuration of wireless network Guide (named the network installation Guide, if your printer has Ethernet printer capabilities) to connect your printer to your router.
       2. If you are unable to connect the printer to the router:
          1. Turn off the power to the router, and then turn on the router
          2. Follow the steps described in the [wireless] Network Installation Guide once again.
          3. If necessary, see what should I do if I can't configure my all-in-one printer (including the connection of wireless configuration)?
  3. When the blue LED on Wi - Fi from your printer stays on (not flashing):
     • If the error ' printer does not "occurred while you have been setting up the printer:
     • 1. Open Software Center.
       2. Select the tools of the printer, and then select Printer Setup Utility (under Tools).
       3. Follow the on-screen instructions to set up the printer.
       4. Try to use the printer again.
     • If the error occurred after you completed the roll-out of your printer from Home Center Software:
     • 1. Make sure that the print queue is online.
       2. From your computer, click Start > settings > printers and faxes (or start > printers and faxes).
       3. Click on your printer.
       4. In the printer menu, make sure that use printer offline is not checked.
          NOTE: These steps may vary depending on your operating system.
       5. Try to use the printer again.

  If the error persists:

  1. Remove the printer from your computer.
     1. Select start > settings > printers and faxes.
     2. Right click on your printer, then click on remove.
  2. If your computer is WINDOWS VISTA or WINDOWS 7 OS, turn user account control.
     1. Select start > Control Panel.
     2. Double-click user accounts.
     3. Click turn user account control on or turn it off.
     4. Select the check box use user account control.
     5. Click OK.
  3. Configure the printer again.
     1. Go to start > programs > Kodak > Kodak Printer Setup Utility.
     2. Follow the on-screen instructions to set up your printer.
  4. Try to use the printer again.

  If the error persists:

  1. If you have updated to the Home Center Software v6.x or greater, disable the Hello Service.
     1. Select start > run.
     2. Type services.msc in the box, and then click OK.
     3. Locate and right click on the Hello Service and select Properties.
     4. Since the "Startup type:" drop-down list, select Disable.
     5. Click OK.
     6. Locate and right click on the network AiO Kodak Discovery Service, then select restart.
  2. If you configure your printer, run the KODAK printer setup utility.
     1. Select start > programs > Kodak > KODAK Printer Setup Utility.
     2. Follow the on-screen instructions to set up your printer.
  3. Select the Hello Service.
     1. Select start > run.
     2. Type services.msc in the box, and then click OK.
     3. Locate and right click on the Hello Service and select Properties.
     4. Since the "Startup type:" drop-down list, select automatic.
     5. Click OK.
  4. Try printing from the center of renovation again.

  If the error persists:

  1. Make sure that any firewall software blocking the required services and that it does not block the firewall of the router. See cannot use a wireless printer to computer on the same network with firewall security program.
  
  NOTE: If you use BitDefender Total Security 2010, the problem can be solved by turning on the game mode in the firewall. If it does not turn on the game mode, temporarily disable the firewall to enable wireless printing.
• Make sure your computer is not connected to a virtual private network (VPN) or wireless home another network of safe working when you use the printer on your network. See using printer with the virtual private network (VPN).
• Check that your printer is not connected to the network trouble with the same name (routers with the same default SSID in your area). It is common for users to keep the value by default, out-of-box, SSID as the manufacturer provides (for example the linksys). If your router still has the default SSID, change the SSID under a new name specific to your router.

NOTE: updated to the latest version of the firmware of the printer and the software when prompted will help you have the most reliable connection possible. Go to www.kodak.com/go/aiodownloads.

If the error persists, contact us.

http://support.en.kodak.com/app/answers/detail/A_ID/36674/selected/true

• on 'code printer' add my printer to my account of "eprint center."

  Hello.

  I have a printer connected to the web, named «premium with touchsmart» web

  the "eprint center" site says you can add the printer to your account with the "printer code", but I don't see it on my printer.

  my printer has "code printer?

  Thank you

  Miki

  Hey, Miki - great question.

  Currently the Web of TouchSmart from HP Photosmart Premium all-in-One Printer using the printer code.

  However, you can add the printer to your account ePrintCenter without code printer by following these steps:

  1. click on the Add Printer button

  2. in the printer to add to your account window, click the radio button "I don't have a code to printer."

  3. Select the "I have a HP Photosmart Premium with Touchsmart Web (C309A). No code necessary printer! "option.

  I hope that help - let us know if you have any additional questions. You can also watch the Print Apps Faq and help to the www.hpeprintercenter.com for more information Print Apps.

• How to print a new code printer so I can use ePrint

  My printer code expired HP ePrint.  How to print a new code printer so I can use ePrint

  Thanks LindaNunn,

  I have a few steps that you can follow here:

  1. on the front panel of the printer, press the right arrow and press "Setup".

  2 scroll down until "Web Services Setup" and press it.

  3. from this menu, press "restore factory settings".  Once the settings are restored, restart the printer.

  4. press the right arrow and press the "Setup" icon again.

  5. scroll down to, then press "Web Services Installation.  Answer the prompts to re-activate the Web Services.

  Once you have done this, print a new code for you.

  Let me know if it helps!

• Code printer deskjet 3070

  Hi, I have just to register for eprint and now my original code of the printer is invalid. How can I create a new one? (Probably wrongly) I followed the instructions to go to settings, then in the wireless, but the only obvious option simply turn wireless on or off without producing a new backgrounder. Can anyone help please.

  Do you mean a 3050?

  If so, click on the ePrint button to go into options ePrint.  I think turning off ePrint and then allowing him to perform another print with your new code printer, which is good for 24 hours, so make sure that add you your ePrint printer Center within this period

• Bar code printed with Adobe Reader XI can be recognized by bar code reader

  Dear support,

  
  

  We generate barcodes and convert it into pdf file using Crystal Report for .NET Framework 2.0

  
  

  The pdf file opens with Adobe reader XI / FoxitReader 4.3.1. It is printed with Avery Dennison AP 5.4 300 dpi.

  
  

  When the pdf file is printed with Adobe reader XI, the barcode can be read with the code reader barcode, but when it is printed with FoxitReader 4.3.1 barcode can be read with the barcode reader.

  I compared the two codes barcode printed and found Adobe printed the thicker lines and larger characters. Thus, two lines pasted together and become a 1 line. As a result, it can be recognized by bar code reader.

  
  

  Could you explain why this happen and how to solve this problem in Adobe? Are there settings I can change to fix?

  
  

  Thank you very much.

  Operating system: Windows Xp or Windows 7

  
  Application: Adobe reader XI or FoxitReader 4.3.1

  I printed the label using Adobe Reader 11.0.06 and the bar code looks like absolutely perfect:

  

  I have also no problem scanning that bar code printed; It reads 00000000110001900631.

  So, in the end, I don't know what the cause of your side.  Can you try to print as Image (Advanced on printing Panel button)?

• code Printer

  Install now, where the hell is my printer code? And I can use my mobile phone number to set up my fax machine or do I need a landline?

  Sorry, but for your fax to work, you will need a FIXED telephone.

• Win32 5 error code printing through Remote Desktop

  I connect to a system windows server 2008 R2 by using remote desktop.  When I try to print on my local printer (HP laserjet 1200 redirected) nothing happens.  I checked the log of events on the server and there is an entry for my attempt to print indicating that a win32 error code 5 has occurred - access denied.  Access to what?  Any ideas how I can fix this problem.

  It suggests also I restart the coil fie - no idea how I make cela or is it a Kipper!

  Hi, Bob P_852,.

  The question you have posted is related to the server and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• HP4500 hp 6210: supplies provided with printer HP4500 and HP-6210

  I need to replace a HP 6210 with a HP4500. The power cord from the HP 6210 has been connected on the system and I don't want to replace the cord that goes to food AC\DC (so no new connections to do). Can anyone confirm that the connection of the power supply cable is the same for both of these models?

  For reference only, I don't have the thread of one of these printers in my hand, I do support work remotely.

  http://thumbs.ebaystatic.com/images/g/gAIAAOSw-jhUEmAs/s-L225.jpg

  Hi @Daxvid.

  Welcome to the Forums of HP's Support.

  I can confirm that the power cord for these units are not the same.

  The 6210 is a much older printer with a maximum consumption of 60 watts.

  Voltage 100 to 240 VAC (+/-10%), 50/60 Hz (+/-3 Hz)

• smart photo in the code prints

  My hp photosmart c464o leaves the impression a few images and impressions of 28 pages of some sort of programming code. I uninstalled all the software for the printer and reinstalled it from the web factory sigh can help you

  It was a corrupt Internet Explorer. install google chrome and problem solved. Thanks for nothing personal tech PS wanted me to pay $ 20 to 'solve '. will never buy hp customer new terrible sevice. Phone support should be free as long as your product is usable

  '

• I can't print from my IPad to my printer HP4500 wireless

  I am trying to print from my new IPad on my HP4500 printer all-in-one wireless and had to send my email address to HP so they could get a confirrational so I can print but I entered my wrong email.  How can I fix it?

  My correct email is [removed personal information]

  I just reset the app data.  Do it open the ePrint mobile app in the selection parameters top right corner which is a symbol of a wheel or gear scroll down select Reset app data.  Now, you should get an option to activate app.

  Let me know how it goes.

• 1053 error Code Print spooler could not start

  My print spooler does not start and I get the error code 1053

  Hi troy,

  I've personally encountered this error and had to reinstall my system, but try this:

  • Simultaneously press the keys Ctrl + Win and should bring up a run dialog box
  • Type C:\System32\Spool\Printers in the Run dialog box and a windows Explorer should appear
  • In the folder, delete all the files in the folder

  This will delete the documents you have sent to the printer. Then, you start the "Print spooler" service in this way:

  • Simultaneously press the keys Ctrl + Win and should bring up a run dialog box
  • Type net start "print spooler".

  Try this and let me know how it goes.

• Printer HP4500: what do you do first, then second place, then third, etc.

  I'm lost in the installation of new HP4500 printer.  W/photos document shows how to get power to it, and that's all.  I don't have a CD, then receive information through their web sites.  I don't want to call wireless controls!  Once the current is provided, what the devil I do then! ???

  Hello

  Have you downloaded the above file and run it on your computer. When to choose USB, it will ask you to plug the cable in and phllow education. Forget the poster for this installation. Very simple.

  Kind regards.

• find code printer

  Hi all

  I'm trying to connect my printer here https://h30495.www3.hp.com/ and I need a code for the printer.

  I printed the printers configuration page but could not find it.

  Please help me to find

  Thanks in advance for your time and knowledge

  Luca

  HP Officejet 7500 a - E910a - Windows 7 32 bit

  Hello

  How to print the printer configutaion? It must be connected to the internet in order to get the code for the printer as indicated:

  Web Services mustbe enabled on your HP product order to use ePrint service. If the Web service is disabled, ePrint will not work.

  1. On the product control panel, press the right arrow key ( ) to display the second navigation screen.

• Bar code print do not?

  Hello! recently, I tried to print a PDF with text and a barcode but the text has printed and no bar code... What's the problem pls help! Thank you!

  

  before printing

  

                                           After printing

  Vista OS

  Adobe Reader 9.5.5

  Printer HP deskjet 1515

  Try to print as Image (Advanced on printing Panel button).