codec on movie maker window issues

Similar Questions

• Codec for movie maker to import a ppt file and make a movie

  Original title: where I could find codec for movie maker import ppt file and make the movie

  where can I find codec for movie maker import ppt file and make the movie

  Hello

   
  See the methods mentioned below and check if that helps.
   
  Method 1:
   
  Codecs: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions
   
  Method 2:
  You can use your favorite Internet search engine to look for third-party codecs.
   
  Note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.
   
  Hope this information helps.

• How to import video from a DVD movie maker window... Who was burned from a video camera

  How to import video from a DVD movie maker window

  Hello J Choi,

  1. What is the operating system installed on your computer?

  2. what version of Movie maker are you using?

  I suggest that you copy the video from the CD on the hard drive of the computer and then import it to create DVDs. Browse the CD and locate the video, copy it to your disk (computer) hard, and then try to import.

  You can check the link for more information below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  Thank you
  Irfan H, Engineer Support Microsoft Answers.

• I can't burn DVD with movie maker window

  I use windows vista, and until very recently, I had no problem with windows movie maker.  But during the past year, whenever I try to burn a dvd, it burns at about 40 percent or more and then all of a sudden, it will say 'cannot complete the dvd, 'unknown error'.  Are there any suggestions as to why this might be happening?

  Hello whalelover,.

  You can try the problems Troubleshooting Microsoft listed here for problems with burning CD/DVDs .
  There is an automatic FIXIT who will scan your computer and fix problems that he sees.

  If this does not help, it may be a problem of encoding and you don't have the correct Codec to hole in Movie Maker.

  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Please answer back with an update.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• codec for movie maker error?.

  I have windows vista tried to put music in the movie maker and get - cannot import because the necessary codec to play the file is not on my computer.  How can I know what codec I need?

  Hello

  All you need is good Codec - get these if 32-bit.

  -Free - CCCP also get free tool of insurgents
  http://CCCP-project.NET/

  FFDSHOW - free
  http://sourceforge.NET/projects/ffdshow/

  Check here:

  Plug-ins for Windows Media Player
  http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx

  ---------------------------------------

  VLC needs, of no use so usually Codec as a backup when asked to support associations of files just say no.

  VLC - free
  http://www.videolan.org/VLC/

  -------------------------------------------------------------

  If 64 bits and you need codec.

  Read this 1st and go that route, or use the one below. (Vista or Windows 7)

  http://www.Vistax64.com/sound-audio/152850-Vista-codec-pack-32bit-64bit-Media-Player-codecs.html

  --------------------------------------------------------------------

  If 64-bit - can run WMP in 32 or 64 bit mode.

  Or try these: download - SAVE - go to the place where your put them RIGHT CLICK – RUN AS ADMIN.

  For 32-bit use these - OR the 32 bit ones listed above which I prefer.

  K - Lite Codec Pack 7.1.X (or newer)
  http://www.codecguide.com/

  Use them for 64-bit:

  K - Lite Codec Pack (64-bit) 4.6.X (or newer)
  http://www.codecguide.com/

  =================================
  =================================

  My friend John Papa - MVP - is the expert on Windows Movie Maker.

  PapaJohn.org
  http://Papajohn.org/

  PapaJohn - online tutorials
  http://www.Papajohn.org/mm2-online-tutorials.html

  Windows Movie Maker Tutorials - check the sounds of the addition in the left menu and others on the
  main screen.
  http://www.windowsmoviemakers.NET/tutorials/

  Windows Live Movie Maker that works on Vista and Windows 7, see the link under Windows Live Essentials.
  http://windowslivehelp.com/

  I hope this helps.

• Crash Windows Movie Maker - Windows 7

  Whenever I'm using Movie Maker, it crashes.  I have read through the forums and tried all of the suggestions I've seen.   I tried Windows Update, uninstall and reinstall Windows Live Essentials, download the latest codecs and updating my drivers audio & video.  Here is the error log.
  Log name: Application

  Source: Application error

  Date: 26/01/2011 11:49:28

  Event ID: 1000

  Task category: (100)

  Level: error

  Keywords: Classic

  User: n/a

  Computer: Watkins-PC

  Description:

  Name of the failing application: MovieMaker.exe, version: 15.4.3508.1109, time stamp: 0x4cda7233

  Name of the failed module: msvcrt.dll, version: 7.0.7600.16385, time stamp: 0x4a5bda6f

  Exception code: 0xc0000005

  Offset: 0x00009cc6

  ID of the process failed: 0xd34

  Start time of application vulnerabilities: 0x01cbbd78f9f741cd

  The failing application path: C:\Program Files\Windows Live Gallery\MovieMaker.exe

  Path of the failing module: C:\Windows\system32\msvcrt.dll

  Report ID: 3cd1ece1-296c-11e0-8d59-f04da2b80dc3

  The event XML:

    

      

      1000

      2

      100

      0 x 80000000000000

      

      7643

      Application

      Watkins-PC

      

    

    

      MovieMaker.exe

      15.4.3508.1109

      4cda7233

      Msvcrt.dll

      7.0.7600.16385

      4a5bda6f

      c0000005

      00009cc6

      D34

      01cbbd78f9f741cd

      C:\Program Files\Windows Live Gallery\MovieMaker.exe

      C:\Windows\system32\msvcrt.dll

      3cd1ece1-296c-11e0-8D59-f04da2b80dc3

    

  Hello TMWatkins,

  Given that you have a problem with Windows Live Movie Maker, I suggest you post in the forums for help from Windows Live.
  They are experts in Windows Live products and would be better able to help with your problem.

  Click here for a link to the message in Windows Live Movie Maker forum.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Video is not displayed in Windows Live Movie Maker - Windows 7

  I have problems with Windows Live Movie Maker on Windows 7. After update to the last version, the preview window left remains black during audio playback. I tried various different clips of different cameras that have been known to work before, and yet they all have the same problem. Thumbnails are displayed on each clip, just no video. Any help would be greatly appreciated, and if I have to download something (for example, a codec), I would have certainly preferred it to be from a trusted site. Thank you!

  Hello

  • This happens with Windows media player only?
  • What were the changes made before the problem occurred?
  If this happens only with Windows media player, you can check this link:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter
   
  You can also try to check update and video card.
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
  You can also post your request in this link for better support.
  http://www.windowslivehelp.com/product.aspx?ProductID=5

• Conversion of project movie maker Windows DVD player

  Can a project created with windows movie maker (and shown through media player) be converted so that it plays in a normal DVD player? If so, how?

  Can a project created with windows movie maker (and shown through media player) be converted so that it plays in a normal DVD player? If so, how?

  ========================================
  Yes... and since you post in the XP forum... you
  must run XP with Movie Maker 2.1?

  OK, you need to save your project in .avi or .wmv
  film format. Then you need DVD Aurhoring software for
  create a video DVD. The software free DVD Flick can do...
  (How to record in .wmv or .avi... pasted below)

  DVD Flick
  http://sourceforge.NET/projects/dvdflick/

  (the file you need to download and install is:)
  "dvdflick_setup_1.3.0.7.exe")

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Here are some basic instructions:

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.
   
  Finally... Here's how to Save Movie Maker:

  To save in a .wmv movie file...
  Type of... CTRL + P to open the movie recording Wizard.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  ICT... "Best quality for my computer.
  Next /.
  Wait while the movie is saved.
  Finishing...

  To save a .avi movie file...
  (and other options)
  Type of... CTRL + P to open the movie recording Wizard.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  Show more choices.
  Other parameters.
  Open the window of the droplet and choose... DV - AVI.
  Next /.
  Wait while the movie is saved.
  Finishing...

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How to import a mp4 Movie Maker Windows XP Home edition

  How to import a mp4 video in windows movie maker.  It does not recognize this file extension

  Hello

  You can import files with the following file name extensions into Windows Movie Maker to use in your project:

  • Video files: .asf, .avi, dvr - ms, .m1v, .mp2, .mp2v, .mpe, .mpeg, .mpg, .mpv2, .wm, and .wmv

  • Audio files: .aif, .aifc, .aiff, .asf, .au, .mp2, .mp3, .mpa, .snd, .wav, and .wma

  • File Picture: .bmp, DIBs, .emf, .gif, .jfif, .jpe, .jpeg, .jpg, .png, .tif, .tiff and .wmf.

  See also:

  http://support.Microsoft.com/kb/308464

• Importing video from movie maker windows media center?

  I'm currently editing advertising messages recorded on my media center shows.  Is the best way to import it into movie maker?  When I try, I go to public folders and the recorded shows are not displayed.  They appear when not in movie maker, but not when you try to import them into Movie maker.

  Suggestions would be appreciated.

  I am operating Windows Vista.  When I right click on the file as suggested the possibility of converting the file is not available.

  I use Windows maker movie 6.0

  ===========================================
  No guarantee... but maybe this article will enlighten us:

  Convert video file Windows Media Center (.wtv) to other Formats
  http://www.AddictiveTips.com/Windows-tips/convert-Windows-Media-centerwtv-video-file-to-other-formats/

  Good luck...

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Sorry, unable to save your movie. Find missing files or delete the unusable items in your project and then try again. "Error: 0 x 87160129" during video editing in Windows Movie Maker/Windows Live Movie Maker

  I use the same device which was used to make movies in the past with no problems. The error message is sorry, unable to save your movie. Find missing files or delete the unusable items in your project and then try again. Error: 0 x 87160129

  I've never had any problems with this before and made more than 100 movies using WLMM or WMM. Thanks for any help. Would that my camera settings? I use a Lumix.

  I just found out what the problem is freakin ' and the solution. If the inserted videos have different "video codec" then it will not work!

  Before adding videos to Movie Maker, throw in a video converter and convert them all. (Even if the original format is WMV, convert again to WMV) that will ensure the output videos have the same codec!
  This solved the problem for me, hope, it does for you too...

• The part of transitions in Microsoft Live Movie Maker windows disappears...

  Hello

  This program worked for me well but today when I launched a new film, the shutters open annimation (transitions and pan and zoom), but once I applied a transition on the first picture, the transitions pane disappeared and the pan and zoom was left pending.  I could not re-open the transition pane if the abstract (Pane shortcut with less choice) opened once.  Also the buttons 'apply to all' doesn't seem to work.

  Can you help me?

  Hello

  This program worked for me well but today when I launched a new film, the shutters open annimation (transitions and pan and zoom), but once I applied a transition on the first picture, the transitions pane disappeared and the pan and zoom was left pending.  I could not re-open the transition pane if the abstract (Pane shortcut with less choice) opened once.  Also the buttons 'apply to all' doesn't seem to work.

  Can you help me?

  ================================
  Just some thoughts...

  It sounds like the complexity of the project that you are
  creation may be exceeding the resources of your
  System. Import you a large number of top
  photos of Resolution?

  It is also possible that your video driver needs
  Update.

  FWIW... the sooner Vista Version 6 Movie Maker can
  be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Vista Windows Movie Maker Installer for Windows 7
  http://noeld.com/programs.asp?cat=video#wmminst

• Windows live movie maker windows 7 Essentials 2011 how can I turn video clip

  I am running wndows 7, couldn't get essentials 12-of his work.  Downloaded 11 essentials now ok but cannot find how to rotate viewo cip.  old xp under effects and could turn without problem.  all ideas

  I am running wndows 7, couldn't get essentials 12-of his work.  Downloaded 11 essentials now ok but cannot find how to rotate viewo cip.  old xp under effects and could turn without problem.  all ideas

  =======================
  See the following screenshot.

  Windows Live Movie Maker - rotate 90 ° right
  http://www.howtogeek.com/wp-content/uploads/2010/04/sshot710.PNG

• Cannot find Windows Movie Maker Windows XP with service pack 3 installed. Where can I get the program?

  
  

  You probably already have Movie Maker.

  Try the following...

  Reach... Start / run...

  Moviemk.exe type or copy/paste

  Press on... Come in

  If Movie Maker is on your system, it will launch.

  If this does not work... the following article may be worth:

  Movie Maker 2.1 Installation
  http://www.Papajohn.org/mm2-setup-software-2_1.html John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• No video playback in windows movie maker, Windows 7.

  my camera supports MP4 format and all of a sudden now when I download, read, I still get audio, but only a black screen where the videos used to display. Help? ideas?

  Dang, this no longer works. Thanks for the idea and the effort.

  ====================================================
  A last possibility...

  May be useful to search to try your computer support sites
  manufacturer or manufacturer of the video card for an update
  driver video...

  Verify that the video driver is problematic is to reduce
  hardware graphic acceleration: If this improves the issue...
  install an updated video driver may be the solution. Acceleration
  may be returned in full once installed the updated driver.

  Windows 7 - reduce graphics acceleration
  (see following article)

  More low hardware acceleration
  http://help.AOL.com/help/microsites/microsite.do?cmd=displayKC&docType=kc&externalId=15391
  (Windows 7 / Vista / XP / 98 / ME / 2000)

  The following article is maybe worth a visit:

  Update the graphic driver - Windows 7, Vista
  http://helpx.Adobe.com/Creative-Suite/KB/update-graphics-driver-Windows-7.html

  Sometimes... Windows Update will install a video driver that is not
  as long as it is compatible with your system than you already had. In the present
  case, the solution would be to back to the previous driver:

  Windows XP - Vista - 7 - restore video drivers.
  Removal instructions
  http://www.nvidia.com/object/driver_rollback.html

  How to roll back a faulty device driver
  for a Version prior to Windows XP, Vista and 7
  http://www.techsupportalert.com/content/how-roll-back-misbehaving-device-driver-previous-version-Windows-XP-Vista-and-7.htm